If I activate 2 processors in msconfig, it will increase the performance of my computer... !

Similar Questions

• ways to increase the performance of the processor

  It might be a silly thing to ask, but I can use a 4 GB USB key to increase the performance of the processor

  during execution of the movies netflix and Amazon to steam. I have 17.4 GB of free space, but then the streaming of the CPU usage is maxed out

  c increace disk space I made the following suggestions given by someone else in the community:

   You can create more free space in C by doing one of the following suggested measures.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  Operating system

  MS Windows XP Professional SP3 32-bit

  CENTRAL PROCESSING UNIT

  Intel Pentium III - M

  Tualatin 0.13 technology

  RAM

  1.00 GB OF SDRAM

  Motherboard

  IBM 2648AU0 (no) 52 ° c.

  Graphics

  ThinkPad TV (1024x768@60Hz)

  S3 Graphics SuperSavage/IXC 1014

  Hard drives

  29.3 GB IC25N030ATCS04-0 (PATA) 47 ° C

  Optical drives

  HITACHI DVD - ROM GD-S250

  Audio

  Intel (r) 82801 CA/CAM AC 97 Audio Controller

  Hello

  Right-click on any video 'flash' and select 'Settings' in the context menu, select the option "use hardware acceleration"...

  You have a graphics card installed... flash videos will / should use his memory for buffering streaming.

  go

  Start > Control Panel > drivers

  or look for updates of your display driver...

  or

  go

  Start > run > dxdiag > display tab, a diagnosis of your display drivers.

• Processor does not reach 100% of the speed of the clock when 'PCI Lock' is disabled in the Advanced Start parameters

  Hi guys,.

  Ran into a strange problem, so thought I'd give this forum to try. Tried to discuss on the Windows forums community but they have been seen nothing of all this.

  I noticed that the machine felt slow in the last month, but never gave him much however. Today, for some reason, I opened the Task Manager and noticed that no matter how much charge the CPU is obtained, the speed does not pass more than 2.28 GHz (Standard clock speed is 2.3 GHz). Now, at first I thought that it could be the power settings, since I got the butterfly processor speed previously by reducing it to 95%. After a few game, I spread the power settings, since the system does not meet them if you cut the State of maximum power, the processor speed drops too. When the value to 100%, it does not more than 2.28 GHz. In other words, since it's a pocessor mode, because it reaches its full capacity, it won't in mode.

  I updated the drivers and BIOS from the manufacturers Web site. The only way to fix this is by checking the box 'PCI Lock' in the advanced in msconfig startup options. When the box is checked, the computer restarts and the processor works properly, increasing up to 3.3 GHz. The only problem with either once the box is checked, problems with other devices, for example, the network card is not recognized at all. Uncheck box reboot and network card functions as it should, but the processor is throttled.

  I don't know if it could have a bearing on the question somehow, but fails the secondary HARD disk spin down according to the power settings. It is supposed to stop after 1 minute, but despite having no activity (in resources, or audible reads/writes monitor) it keeps spinning. If you have any advice on the processor, maybe you have an idea on this instead? His eating his power and producing unnecessary heat and noise because the hard drive is used for backups.

  The specifications are:

  Reference Dell M3800

  Windows Pro 10

  CPU i7-4712HQ 2.3 GHz (up to 3.3 GHz)

  16 GB OF RAM

  512 Samsung SSD (with BONE)

  Secondary 1 to

  I don't know when the issue started, since performance was slow for about a month and I can't blame new facilities for this. The PCI lock seems the only way to solve the problem temporarily. All the drivers are up to date, even tried downgrading and upgrading the BIOS. Only the PCI lock seems to have no effect.

  Any help would be greatly appreciated!

  Hi cc171,.

  Thank you for your continued support.

  After a few more game, I'm desperate and "reset" of the operating system (keeping my files). That, to my surprise, did not help. I've done some windows system checks in the cmd (sfc and dism) and tools are a few corrupted files (which they were unable to repair due to files being corrupted as source). I then provided dism an iso windows fresh to keep system files to and managed to fix the image. Unfortunately, this does not solve my problem.

  Here are the corrupt system file that could not be repaired:

  Could not reproject corrupted file [23 ml:24] "? \C:\WINDOWS\SysWOW64"\[l:10]"opencl.dll"; source file in the store is also corrupted

  I then proceeded to do a complete factory reset (because I lost all my applications anyway, there was nothing else for me to lose). The system restored to W8.1, which is really strange, because I deleted all the files of previous windows.old through disk cleanup. Even if I had retired, good news. The limitation was missing, and the drive turned down when realized. I've been invited to upgrade to W10, I did (the download process and installation is rather time consuming...) and once up and running, the CPU still works correctly.

  Of course, my next step, has been updated all my drivers using my product key on the DELL Web site.

  I downloaded everything manually and kept checking my processor after each installation/reboot. Everything worked fine until I installed the:

  * Intel platform dynamic and thermal setting driver *.

  After a reboot, the Task Manager showed once again to the top of the formidable GHz 2.28. I put a system restore point, just like windows has fully booted, before updating the drivers, so I decided to restore it at this point. No luck, the processor still be strangled. Because I have nothing to lose, once more, I do a reinstall full (which once more, the rolls be back to W8.1. After around an hour, the W10 up and running. I went to update all my drivers, exuding the platform driver and dynamic thermal setting, with reasonable success. The processor is no longer limited. The only problem, after installing the motion sensor driver, the HARD drive stopped spinning down. At this point, I don't have time to play, decided not to back down.

  Thus, at the end of the day, the culprit to my problems were the official DELL drivers:

  System utilities | Intel platform thermal and dynamic framework pilot (104 MB)

  &

  ST Microelectronics LNG3DMTR pilot sensor of movement (35 MB)

  With the new installation of Windows (and the Motion Sensor installed Driver), once more SFC/scannow found errors that cannot be repaired. Thorugh DISM, I managed to repair the image of the system, but the HARD drive always turns freely. More importantly, the limitation is GONE.

  Regarding your questions above, I don't have a chance to check if there is power or the current limit, but there's certainly been no thermal regulation. The CPU is still relatively fresh, and fans did turn, even if very quietly (now with the processor works properly the temperature rises up to 84 degrees (up 3.29 Ghz) and fans spin very hard under prolonged load).

  Regarding the HDD, no system or other utilities consulted the reader (analyses excluded antivirus, indexing and so forth that unchecked, the disc is only used as a manual backup). Even if the HARD drive isn't spinning down, no limit certainly makes life a lot easier. Ill wait for a new version of the driver for the motion detector see if it solves the problem, if not, disconnect the drive from the motherboard may be my only option.

  I don't know why the official Dell drivers could corrupt the file system, since they were after all, designed for this particular system, on this particular operating system. There are no other programs interfere with their installation and operation, given that the pilots were the first things to be updated.

  At the end of the day, I found the problem, it's a good step forward, but it seems that the resolution is out of my reach.

  Thanks for your help!

• My ipad is disabled. How to activate ipad without data loss? I know the password

  My ipad is disabled. How to activate ipad without data loss? I know the password

  You can not. If you know the password, how the iPad become disabled? If the device is disabled, the content is not already available. The only way to recover the device is to restore. You can restore your last backup after that. Follow the instructions in this document support. If you have forgotten the password for your iPad, iPhone or iPod touch, or your device is disabled - Apple supports

• Friends hahaha... I'm unable to re - activate my iPhone 5 years after updating to the latest version of OS i forgot my Apple ID. I know the password ID Apple and iPhone lock code. Also its my fingerprint reading. Unfortunately the option "Find my iPhone"

  Friends hahaha... I'm unable to re - activate my iPhone 5 years after updating to the latest version of OS i forgot my Apple ID. I know the password ID Apple and iPhone lock code. Also its my fingerprint reading. Unfortunately, option "Find my iPhone" is active... Could someone advise me please how can I reactivate my iPhone in this scenario?

  https://iforgot.Apple.com/password/verify/appleid#! & section = appleid

• I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I plan to upgrade my OS to El Capitan.  What are the processor speed and memory required for the operating system works well?

  I use a processor 2.3 GHz Intel Core i5 with DDR3 4 GB 1333 MHz memory.

  My last similar attempt on another machine resulted in a very slow computer.

  Thanks, Ron

  Apple says the following:

  General requirements

  • OS X 10.6.8 or later version
  • 2 GB memory
  • 8.8 GB of available storage

  For best performance, I would say not less 4 GB and preferably 8 GB or more.

  Your i5 is well able to support properly.

  http://www.Apple.com/OSX/how-to-upgrade/#Hardware Configuration

• How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  How to install the version of nor-Sync 3.1 in the remote system (processor integrated PXI chassis) to recognize the PXI-6682 device to work with labview RT?

  Hung Nguyen

  Hung Nguyen,

  The installation of drivers for all targets in real-time remotely is more or less the same. First install the driver (in your case the NO-Sync) on your PC, then install it on your system remotely through MAX. For step-by-step instructions, see install the software on your NI CompactRIO controller.

  See you soon,.

• Dual processor Z600 increase the size of the memory

  Looking to increase the memory of 8 GB (2x4gb) by processor, 12 GB or 3x4Go by processor. The machine has 4 DIMM with part number 591750-571 1 and I have been cited with a reference FX621AA number for the DIMMS 2 again.

  591750-571 - HP - 4 GB (1X4GO) 1333 MHZ PC3-10600 CL9 ECC REGISTERED DDR3 SDRAM DIMM

  and

  FX621AA - HP - 4 GB 1333 MHZ PC3-10600 CL9 ECC REGISTERED DDR3 SDRAM DIMM (1X4GO)

  Everything seems ok with the two specs, but would be nice for this mixture of memory to be confirmed. Thank you.

  591750 571 is a spare part / service part number. Part # FX621AA is the part number "detail" that is sold in stores. Chances are it will be tagged with the spare room once you get it in your hands.
  
  There is no problem with the installation of these modules of FX621AA in the running system of the 591750-571-the specs for speed, feature of the ECC and check that all game, you receive the right RAM for sure.

  Part FX621AA # is noticed that the good original piece for this system with the specifications of your RAM by the quickspecs, just in case you want a double:

  http://h18000.www1.HP.com/products/QuickSpecs/13277_na/13277_na.html

• Activating game FSX error "Unable to Activate Online, a technical problem occurred while accessing the server"

  Original title: FSX Activation game

  Gentlemen: after years of use in FSX (Microsoft Flight Simulator X).  Now, I ran into a problem of Activation. His version of "Unable to Activate Online, a technical problem occurred while accessing the server, license authorization was not successful, we apologize for any inconvenience"...  Support for the game ended last year. Is this in any way about this? Or is it temporary problem? "My first post" thank you... P.S. When MS comes out with a new Flight Simulator thanks...

  Gentlemen: Problem 'Resolved' I went in FSX.exe properties and on the Compatibility tab, Switched setting the compatibility to Win XP SP3 for Windows 7. And it worked the active game. Thank you

  for the info and try to help. Simple, I hope someone else can learn from this. Thank you!

• Try to activate windows by phone and when I enter the installation id its saying that it is not recogizing the code.

  Reactivation of windows does not...

  My laptop crashed and I went to get it fixed but its asking me to activate windows by phone and when I enter the installation id its saying that it is not recogizing the code. can you please tell me how do to fix this or if I can call a customer service number. Thank you

  The company that fixed your laptop must solve this problem.

• Reinstalling Windows Vista tells me to activate windows, but don't let me use the same key

  I had to erase and reinstall and now it tells me to activate windows, but don't let me use the same key... I don't want to buy a new key, I always use the same program Windows Vista... HELP Please!

  Original title: the windows product key

  Hello

  How do you re-install?

  Do you have or use a sale at retail or OEM DVD?

  Do you have an error message: "key already in use"?

  If you re-installed the same operating system on the same computer and you receive an error message, you will normally need to make a phone Activation > ignore the automatic prompt > and brace yourself for a real person explain.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

• Z620 HP: HP Z620: increase the clock speed of the processor

  I have a HP Z620 workstation with processor Intel Xeon E5-2620v2. In the datasheet writes: "Turbo boost stepping occurs in increments of 100 MHz.".
  I want to increase the clock speed of the processor to the top of 2.1 GHz to 2.5 GHz. How to do?

  Hello

  Turbo boost is dynamic based on demand. If you want a base clock faster then replace two processors Xeon E5-2630 v2.  If your application cannot take advantage of 6 hearts then consider the E5-1620 v2 which is 4 cores and has a base of 3.7 and turbos at 3.9 clock.

  BTW - Turbo boost are not available on all PC configurations.

• Is there a way to increase the size of aka msconfig window System Configuration?

  In windows 95 and 98, it was easy to increase the size of the System Configuration window, and there even a beautiful button "expand".

  It was possible to use the Win9X msconfig in XP, but it doesn't seem to work in Vista Home premium 64. Is it possible to increase the size of the window? Can I change a setting of registry or something in the .exe itself?

  I'm bored of ResEdit on old Macs.

  Hello

  N ° for some reason, the size of the window of the utility was locked in Vista and Win7.

  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• How to activate the hibernate on my computer

  Dear Sir

  How to activate the hibernate on my computer.thanks

  Solution - 1:

  To allow the Hibernate, follow these steps:

  Click Start and type cmd in the box start the search.
  In the search results list, right-click Guest, and then click Run as administrator.
  When you are prompted by user account control, click on continue.
  At the command prompt, type powercfg.exe / hibernate on and then press ENTER.
  Type exit and press ENTER to close the command prompt window.

  To facilitate the unavailable Hibernate, follow these steps:

  Click Start and type cmd in the box start the search.
  In the search results list, right-click Guest, and then click Run as administrator.
  When you are prompted by user account control, click on continue.
  At the command prompt, type powercfg.exe / hibernate off the coast and then press ENTER.
  Type exit and press ENTER to close the command prompt window

  Solution-2

   

  To have the computer automatically hibernate after specifying the Minutes: -.

  Click Start

  Power of type in the search field.

  Click on Power Options

  Select the power plan that is already in use.

  Then set the time of hibernation at your convenience.

• Can't activate Windows 7 Basic and we tried all the advice... what to do now?

  I bought a netbook with Windows 7 Starter is installed.  No Windows disk was provided with it.  I bought a Windows 7 Home Basic Service Pack 1 by the Sahara, for my office.  Unfortunately, I lost the product key, which I got through Belarc.  I re-installed my Windows Basic on my netbook, but it does not accept the product key to activate windows.  I tried to change the product key.  Microsoft has confirmed that this is a genuine windows product.  How to activate windows on my netbook?

  Have you tried to restart by phone?

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us