How to increase the value of the queue for a server to avoid errors

In the RESOURCES section of a config of ubb, "MAXQUEUES 700" stand for all servers queue or queue on each server?

Because there are a lot of "ERROR: the Message Queue blocking warned childbirth, Qaddr = 583902 ' for a server in ULOG, what should I change the value of the queue of this server to a higher value to avoid this error? Change the "MAXQUEUES? If increase the queue for a server?

Thanks for your kindly reply.

MAXQUEUES is used to specify the maximum number of queues - not number of messages on a queue of (each).

To solve your problem of blocking, you might consider adding servers (to accelerate the responsetimes).
Another option could make synchronous calls if it would make sense for some application that you design.

Tags: Fusion Middleware

Similar Questions

  • How to open the queue for the printer HP Deskjet F2120 all-in-one printing?

    My OS is Windows 7 Home Premium. I had a problem with being stuck in the print queue, print jobs what has caused the printer become inoperative.

    The print queue is now disabled, but I had to download a diagnostic tool from HP which has scanned the printer and cleared the queue. That fixed the problem, but in the past when I had this same problem, I just access the leading printing and deleted stuck jobs. I couldn't find a way to get to the queue print this time and I hope someone out there can tell me what I did right.

    Hello

    • Click Start
    • Click on devices and printers
    • Right-click your printer and choose "see what's printing.

    Tricky

  • How to increase the timeout for download on GBA?

    Hello

    We try to download a large file (50 to 75 MB) PDF to our Association. But we have always had an HTTP timeout. Send us the request typical HTTP POST to .../Packaging/Package with some parameters.

    I think there should be some options for the packaging.conf file in / etc to increase the time-out period. But unfortunality I wasn't able to find these options in the documentation. Maybe I'm blind too.

    Can you help me please? Is there a list with all the options for packaging.conf, fulfillment.conf and admin.conf? May I can find other interesting options in this list.

    Thank you in advance!

    Kind regards

    Nicolas

    I upload the file via SFTP in a location known and accessible to the service of packaging and if you send the application package using the dataPath option, not the data option.
    This will also help with the use of memory on the server package.

  • How to send the SQL for SQL Server statement and return data without using database connectivity Kit?

    Hi, I tried to figure out how to extract data from my SQL Server databases and reading messages and to do some tests with examples, I can get data connection type in my SQL server, but so far nothing helps.  Is it possible to get data from a SQL Server database without using the database connectivity Toolkit?  and if so, how?  are there whitepapers and/or examples of this?  So far, I can't find something that works.  Thank you.

    Jesse - what is your reason for not using the database connectivity Toolkit? It is by far the best way to recover the data.

  • How to set the passwd for mail server

    Hi Experts,

    I'm configuration related e-mail setting for wc ps6 console em, there is no entry for the password, so sending a test email will be always failed with the authentication error, how to fix?

    Best regards

    Hello

    WCC does not support servers Auth based e-mail, but as a workaround, some you can set the address of the SMTP server of the University Complutense of MADRID (option config.cfg "MailServer = xxxxxx") to localhost and use sendmail from the server host (if Linux/UNIX) or SMTPServer (if Windows) abilities to interface with the SMTP server - the scale of the field located in the MX records.

    I hope this helps.

    Thank you

    Srinath

  • How to move the vm for VMware Server ESXi

    I have a host with ESXi 3.5 and I want to move virtual machines to a different machine with VMware Server 2.

    Any idea how to do to move the virtual machine?

    Thank you

    You can use VMware Converter (free copy).  When you install it convert you a machine and select the Virtual Machine of VMware Infrastructure as the virtual source then Machince as destination.

  • purge the cache for Application Server in 8.43

    Hello
    How to purge the cache for Application Server in 8.43?
    Thank you.

    In the later version, it is an option in the psadmin menu, not sure about PT8.43.
    In any case, delete the file %PS_HOME%\appserv\domain_name\CACHE did the same thing.

    Nicolas.

  • Toshiba 24W1433DG - how to increase the size of the subtitles

    Good evening.

    I bought model lcd 24W1433DG I
    in trouble in subtitles divx, movies meto a pen and turn the LCD screen and all the subtitles of movies are very small and the big give computer... I went to the maximum value and the 30, but the legend is small (I mean the subtitles of attention for divx movies) would like to help

    How to increase the size of the subtitles.

    Thank you

    Message has been translated

    Hello

    As far as I know, the size of the subtitles can be increased.

  • Satellite A300-18 has: how to increase the screen resolution

    I have recently buy a Toshiba Satellite A300-18 a, and I want to increase the resolution of the screen.
    Currently the max resolution is 1280 x 800.

    Does anyone know how to increase the resolution?
    Where can I find the drivers to increase?

    Thank you

    Henrique

    Hello

    I don t think a new graphics driver would allow a higher screen resolution on your laptop A300.
    Have you checked your manual for more details?

    I downloaded the user manual of the Europe of Toshiba page and discovered that the display is a 15.4 WXGA 16Mill colors with the following resolution: 1280 horizontal and 800 pixels vertical.

    It seems that you are already using the highest available resolution and therefore you will not be able to wear to higher values.

  • How to change the ucs for esxi 5.1 hba queue depth

    Hello

    How can I change the depth of the queue for a host in 5.1 for ucs b200 esxi?

    In esxi

    I type esxcli system module settings - list m

    It shows

    ~ the list of parameters of module system # esxcli fnic m
    Value of Type name description
    -----------------------  ----  -----  -------------------------------------------------------------------------
    uint fnic_fc_trace_max_pages Total allocated pages of memory for the buffer of trace fc
    uint fnic_max_qdepth depth of queue in the report for each LUN
    uint fnic_trace_max_pages Total allocated pages of memory for the buffer of trace fnic
    initial heap_initial int heap size allocated for the pilot.
    heap_max int maximum size of the available heap for the driver.
    the pool of skb_mpool_initial int size drive minimum private socket buffer memory.
    skb_mpool_max int size maximum achievable private socket buffer memory pool for the driver.
     
    How can I change it and what is the depth of queue recommended?

    Was taken before, see for example

    https://supportforums.Cisco.com/discussion/12215126/queue-depth-executio...

    https://supportforums.Cisco.com/discussion/11744776/UCS-HBA-queue-depth-...

  • How permanently increase the font size in windows applications

    How permanently increase the font size in Windows applications as for example the mail application? The letters are much too small, and my eyesight is perfect! Thank you

    Sign of salvation,

    Welcome to the Microsoft community forum. From the description of the problem, it seems that you want to change the font size for the user interface modern app.

    You can change the modern user interface text size by going to the charms > settings > change the settings of the PC > PC and peripherals > display

    Also see this Microsoft article:

    http://Windows.Microsoft.com/en-us/Windows-8/make-text-screen-larger-smaller/?v=t

    Windows 8.1, you can now set the DPI (Dots per Inch) scale to make text and other items, such as icons, fonts and windows, to more or less important for all display or by display screens.

    Windows 8.1 DPI scale improvements are mainly focused on:

    • Optimization of ergonomics and the readability of displays high-resolution
    • Offering an experience uniform multi-screen systems
    • Give developers optimize app specific scale based on display DPI

    If you are using a resolution of 1366 x 768 display on a shelf, chances are that UI will look good 100% ppp settings. But what about when you connect the tablet to an external high resolution? In Windows 8, you can choose either 100% in order to optimize the user interface on the screen of the tablet or display up to 150% in order to optimize the user interface on the outside. You have to make compromises.

    8.1 Windows takes care of this issue pressing address scaling of IPR by display . By default, Windows 8.1 will choose the optimal DPI scaling value for each display based on the value selected for the global scaling in the control panel.

    You can also view the suggestion provided by Shawn on this thread.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows8_1-ECOMS/how-does-one-increase-the-size-of-the-text-of/58c7f3fe-8686-4422-ad36-8ab75515527f

    I hope this helps. If you need help with Windows, let us know and will be happy to help you.

  • How to increase the activity ID in P6 EPPM length

    How to increase the activity ID in P6 EPPM length to a maximum of 40

    What is your version of P6? I'm guessing you're in P6 8.3.1 or previous 8.3.2 since you should be able to increase the value up to 40

  • How to increase the size of the heap of the container in whioch THAT BPEL is running?

    Hi all
    I recently raised a SR, they asked me to do the following,


    Can you please try and start the container runs the process BPEL with max
    the heap space (-Xmx) of 2 GB and the space of eden (-Xmn) to about 60% of 1228 m and
    the option - XX: + AggressiveHeap set. (even if this option is recommended for
    multi processor machines say 4)


    can someone please explain to me how to increase the heap size and the size of the container BPEL Eden?

    Thank you

    Hello

    Locate the file $SOA_HOME/opmn/conf/opmn.xml

    Change the values of the parameters start-* - mx1024M - ms512M * to the original.



    Concerning

  • How to increase the size of the tabs?

    http://i.imgur.com/pMYJr4r.PNG

    I've been optimizing the menu bar to save as much space as possible and I'm frankly pleased with what I got, with the exception of a fact of monkey - tabs are too small, because the space is taken by the address bar. How to increase the length of the decrease address bar bi-bouteille tab?

    Hello VladimirVilimaitis, you might try the following extension: https://addons.mozilla.org/firefox/addon/custom-tab-width/

  • How to increase the size of the menu bar?

    My bar menu and all the buttons at the top suddenly, all are much smaller. Any ideas on how to increase the size of the top of the screen? IM talking not about the size of Web pages, just the menus up to the top.

    Don't want to use the menu bar and not the Firefox menu button?

    See also:

    You had previously placed all the items in the Menu bar?

    You can set the layout.css.devPixelsPerPx pref on the topic: config page on 1.0 or Windows 8 to 1.25 and if necessary adjust layout.css.devPixelsPerPx from 1.0 to 0.1 or 0.05 steps (1.1 or 0.9) do the icons to display properly.

    See also:

    An extension allows you to adjust the size of the text in the user interface and zoom the page in the browser window.

    You can watch this extension to adjust the font size for the UI (toolbar).

    You can watch the Default FullZoom Level or NoScript extension if the web pages need to be adjusted after the change of layout.css.devPixelsPerPx.

Maybe you are looking for