How to insert table 1 d elements in specific place in the 2D array

Similar Questions

• Replace table 1 d at a specific point in the 2D array

  Hello

  I have a chart 2D with a lot of information and the only want to replace data at a specific point, see image:

  When I use the subassembly to replace I can replace only a specific line and column item...

  Best regards

  Thijs Boeree

  I think I already had... Without a loop!

  I use the table of indexes on the 2D table then I use the subset of the table insert table 1 d, here you can give a hint and replace the 2D array again with the newly formed 1 d array!

• How to insert a page in a section, but NOT like the last page?

  How to insert a page in a section, but NOT like the last page?

  and how to integrate fonts in a pdf export?

  How does choose a 5.5 x 8.5 book format?

  Adding pages to get to the end.  You can, however, keep typing to the point you need to add a page. Once the page seems to make corrections.

• my computer crashed, how do I download adobe photoshop elements digital format (I have the cd

  my computer crashed, how do I download adobe photoshop elements digital format (I have version cd, the redemption code and serial No.) on my new computer which lacks a cd player

  If you follow the 7 steps you can dl a free trial here: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  and activate it with your serial number.

  If you have a problem dl'g, you don't follow all 7 steps.  the most common mistake is not meticulously follow the steps 1, 2, and/or 3 (which adds a cookie to your system, allowing you to download the correct version of the adobe.com site).

• How to compare one by an element of a column with the first column in the other table?

  Hello

  I have two files into a single file has only Id numbers and the second file has table with for example the column 4, and his first column identification number.

  So I want to compare the first item in the User.ID file with the 1st column all the table file items in this column until it finds matches.

  If compare match then LED will be IT other wise LED will be OFF.

  Here as an attachment, I've attached the two file.

  Please guide me how can I do the same thing.

  Thank you much in advance.

  
  

• How can I replace a source element without having to redo the iMovie project?

  When exporting an iMovie project, I detected that a source element had bad images and export could not comlete (error 10008). I fixed the file and replaced it within the overall project. But after that iMovie refuses to play this clip during the opening of the new project - it shows an exclamation point in the chronology and the message "the clip has changed."

  Is there a way to replace an element in the project?

  A few facts:

  • The clips are AVI containers
  • I used Yodot AVI repair to remove the bad images
  • The repaired file use the same as the original codecs
  • version of iMovie: 10.1.1

  Yes.  With the Finder, drag the clip fixed everywhere where it is saved until it is placed on the old item in project.  When a green plus sign appears next to the cursor let go of the mouse button and you will get a menu.  Click "replace".  The duration and all connected titles, glitches or audio should not be affected.

  

  Geoff.

• How to insert a photo seen on each PDF file during the creation of a portfolio?

  I use Adobe Acrobat Pro 10. I would like to create a portfolio containing 4 3D - PDF files (here in this example presending only 2). The problem is that in the portfolio, he tries to get a preview of the PDF file, but he can't because it is a 3D model, so it appears as follows:

  

  Is it possible to add a photo visualisΘe in the portfolio to each "slide" rather than add another first page that contains a photo for each PDF file? I wish that each PDF file will only contain the 3D model.

  Thank you

  The insights generated by Acrobat are automatic, you can not change them unless you write your own browser in Flex.

  That said, the preview going to show the image of the poster for a 3D scene, if one is defined. In your case (assuming that the files are the same as the samples you have posted earlier), there is not a picture of the poster. Before you add each file, right-click the 3D annotation, choose Properties, and then "Retrieve the default view poster". Save, and then add it to the portfolio and it will look like this:

  

• How can I find online a list of specific changes in the latest version of Firefox?

  site design Web current mozilla eliminated (or hidden beyond my ability to find) information on what has changed in the last published Firefox. The only thing I can find on "what's new" is a video of bland, generic "Firefox 3.6 is wonderful."

  == The last version (3.6.4?) first time

  http://www.Mozilla-Europe.org/en/Firefox/3.6.6/releasenotes/

• How I don't know what download activity takes place at the present time?

  I'm on a new laptop using Windows 8 and 8.1 of Windows being downloaded.  I use a satellite connection is a slow Internet connection. For this reason, with this download and other downloads that I did in the past, I need to be able to see what is the status of the download - what percentage has downloaded? Is something that downloads yet? Also, sometimes I get a beep, but no message on the screen, and I have NO idea of what he's trying to alert me to (I guess it has something to do with Internet activity, because when it happened, I was away from the machine.) (I do not even see a "the disk activity" light on the laptop, so I'm really in the dark, unless there is a method of Windows to see the details.)

  Can someone tell me where I can configure Windows 8 or 8.1 to let me know what is happening currently?

  Hi Suzanne

  Try this:

  Windows 8 go to the desktop

  arrow down to the bar spots at the bottom of the screen

  hover over the image of the network (it looks like a monitor and an antenna next to him). near the lower right corner

  Do a right click and left click "open the network and sharing Center."

  window opens for the network and sharing Center

  left click "ethernet" his own upper right corner of the window

  This will open the window "ethernet status".

  now "sent" and "received" any activity tracks

  Hope that helps you

  JasWho

• How to do a bitwise operation on a specific column in the database timesten

  Hello

  I need to do a bitwise operation and (&) operation on a column of data (whose datatype is NUMBER).

  If I do something like SELECT 1010 & COLUMN1 from TABLENAME;

  It will give the error: 'type 'NUMBER' not valid for operator 'BITAND' operand in expr data '.

  Anyboday can help me?

  Thanks in advance

  Concerning

  Arnaud

  NUMBER is floating point format. Bitwise operators apply only to INTEGER values. There are several ways to work around it...

  1. If the column in the database only stores integral values and then change its definition to NUMBER (n) (choose n) properly.

  2. change the select statement to SELECT 1010 & CAST (COLUMN1 AS TT_INTEGER) (or TT_BIGINT according to the maximum value if you tore in the column)

  3. change the column to a native integer TimesTen type as TT_INTEGER, TT_BIGINT etc. It uses less space and more efficient.

  The columns should * only * be defined as NUMBER (with no precision or scale) if they really need to have this flexibility. Always use an explicit precision (and which adapted as appropriate) because this saves memory and allows to avoid this kind of issue. Better yet, use whole native types TimesTen, wherever possible. They use less memory and provide superior performance to those of all variants of NUMBER.

  Chris

• How to insert sections of column within a document?

  Hello
  I am converting a Word document to FrameMaker.

  I have to insert some long columns (sometimes more than 150 lines per section of the column) to specific places in the text.

  It might be something very easy to do, but I have not yet found!

  
  

  Basically, it is the structure of the document I want to achieve:

  

  Sections of column (in green) that begin and end within the normal text sections (as we would in Word).

  
  

  I tried to divide my basic text frame and convert some sections divided into sections of the column.

  
  

  1 chapter, divided in 5 sections:

  section 1: normal and graphic text

  section 2:2 - section columns

  Article 3: text normal and graphics

  4 of article: section 2-columns

  Article 5: normal text and graphics

  
  

  However, these sections do not automatically adjust when I paste large amounts of text in there.

  As a result, I end up having to manually adjust each divided section (stretch them vertically and push down in the following sections, because they do not move from their original place (not "section flow")).

  
  

  My questions:

  1 can I use the feature column in another way?

  2. How can I make each section adjust automatically to the amount of text it receives?

  3. How can I get my sections elapse automatically on others with text and graphics to fill?

  
  

  Thanks in advance!
  
  

  Use Across-All-Columns-and-Side-Heads for titles. Set a tab in the AutoNumber for chapter headings so that the paratext is aligned with the left edge of column Center.

  It does not seem possible to have unbalanced normal FM multi columns. You can make unbalanced with executives from individual text automatically connected on the Master Pages, but then the AAFC tricks do not work.

• The associative arrays, insert, rownum as index loop or not.

  Hi guys,.
  I want to keep this subset of rows around 5000 in a collection / table temporary but don't know how to do it. have not found much on google either.
  the associative array seems good because it has no limit (and it may be more than 5000) and it offers a quick access.
  
  DECLARE
  TYPE assoc_array_str_type IS TABLE OF VARCHAR2 (32) INDEX OF PLS_INTEGER;
  assoc_array_str_type v1.
  BEGIN
  
  (23231) v1: = 10;
  
  -Select distinct rownum, rmnumber made in v1.
  
  END;
  
  I thought that I have use rownum as index but have the feeling that I can't 'load' a set of data both in the associative array. I need to loop and then add one don't I? is there a faster way?

  You can use in bulk to collect:

  declare
     type assoc_array_str_type is table of varchar2(32) index by pls_integer;
     v1 assoc_array_str_type;
  begin
     select ename
     bulk collect into  v1
     from   emp;
  
     dbms_output.put_line('v1(1)='||v1(1));
     dbms_output.put_line('v1(2)='||v1(2));
  end;
  /
  v1(1)=KING
  v1(2)=BLAKE
  

• How to insert image bg in table?

  Hello, I followed this tutorial of training from someone who is using Dreamweaver 8. He tells me to select the table and simply scroll the bg folder in the properties panel and upload your image of bg. In my Dreamweaver CC, I choose the table easily enough, but the bg folder won't. Can you please tell me how to insert a bg image in a table?

  Thank you.

  As DW 8 is more than 10 years old, I would not consider using a tutorial that has been prepared using this version. And use tables for layout is certainly not the way to go, either. The right way to proceed would be to use CSS to specify the background image for an element of your page. In this way, the specification of the background is not part of the content of your page, but can reside in an external file that is linked.

  Tell us please what your skill level is with HTML and CSS. Perhaps is that a day spent running through the tutorials at http://www.html.netor http://www.w3schools.com is everything you need to get in tune. It is true that the more you know about HTML and CSS, the simplest DW will be using...

• How to insert the value of table display

  Hi all
  
  I have a page element named that email and set this as view only, now I need to insert this value in the table I use insert statement like this: P255_EMAIL, but it gives an error.
  
  
  Can someone tell me how to insert this
  
  Thanks and greetings
  srikkanth. M

  Srikkanth,
  A single display element is not rendered at the point of entry to the difference of the other editable on the page elements, if you look at the html code of any view one item and compare it with a textfield should be clear.

  You can have another element hidden with the value that can be returned in the process
  OR

  Here's a little something that does not need any additional items to make the item view alone and still available in the world as a normal part

  Do not say P100_MY_ITEM like a textfield
  But in the text of element Pre_ give you

  <span class="display_only" >&P100_MY_ITEM.</span><span style="display:none">
  

  And in the text of item Post_ put

  </span>
  

  Hide the textfield object, it shows the value of the item as a single text to display.

• How to perform an addition of column values in an insert query that would insert in the 3rd column, and the values how to insert into another table.

  I have two tables (2) RESULT TAB (1)

  CREATE TABLE TAB

  (

  NUMBER OF SNO

  A NUMBER,

  B THE NUMBER.

  NUMBER OF THE SUM

  );

  CREATE AN ARRAY OF RESULT

  (

  NUMBER OF SNO

  NUMBER OF THE SUM

  )

  my doubt is:

  (1) I want to insert a table TAB, my question is how to insert a column to the SUM using the column A AND B... Here im adding two values of the column and store result in the AMOUNT column.

  SNO   A  B  SUM           

  1 100 150 250

  2 300 100 400

  I want to like this, it is possible with single insert query?

  
  

  (2) at the time of the insertion TAB of values that SNO, and the values of table TAB $ insert in the table of RESULTS... is it possible these two inserts at the same time?

  in fact, im using another this table.fro TAB and easy to understand I write like that, please solve this problem

  First, you post in the wrong forum as this one is only for Oracle's SQL developer tool. So you might ask your question in the general forum of SQL.

  Second, you might solve your problems with bind variable:

  Insert tab

  (sno, a, b, sum)

  values

  (: SNO,: A: B: A + B :))

  You should not use sum as column name because it is a reserved word.

  More you cannot insert into two different tables with a single SQL, but you can use PL/SQL to do this:

  Start

  insert into tab values (: SNO,: A: B: A + B :);)

  insert into result values (: SNO,: A + B :);)

  end;

  If you meet sno from a sequence, you could do something like this:

  Start

  insert into values tab (seq_sno.nextval,:,: B,: A +: B) return sno in: SNO.

  insert into result values (: SNO,: A + B :);)

  end;

  Hope that helps,

  dhalek