Satellite Pro U200 suddenly no sound

Similar Questions

• No sound after installing Windows 7 on Satellite Pro U200

  Hello

  I just installed Windows 7 Professional on my Satellite Pro U200 10 p.

  Available for XP Pro.

  Sound has stopped working since the new facility (which fromatting the drive - no partition) and can not find a solution. The v6.10.1.6000 of SoundMAX Integrated Digittal HD Audio Driver is installed. I uninstalled and reinstalled several times, but this doesn't seem to be the right driver. I can't find info to tell me what the correct driver can be either. The Toshiba site is a little sparse on Windows 7 drivers for this model and gives no indication that the driver may be is.

  Windows 7 does not think that there is a problem and some reports that "this device works properly." in speaker properties > Configuration information dialog box. However not coming out, the speakers or the 3.5 mm jack

  Anyone got any ideas?

  Thank you

  James

  Hello

  Go to Device Manager and check what sound chip you have exactly:

  Use this statement:
  [How to identify an unknown device? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=78]

  Then you should be able to find a good pilot.
  I also recommend remove/delete the sound card in Device Manager.
  Just select the audio remove card and press on, and then restart the laptop

  PS: Are you sure that the sound is not muted? Please check this too!

• Satellite Pro U200 - no sound after installing Windows 7

  Hello

  I have a problem with sound after installing Windows 7 on a (PLUA1E) satellite Pro U200. No Win7 audio driver available on the Nordic pilot site. Help, please.

  G.Magnason

  Hey Buddy,

  Have you already checked the site Web of Toshiba itself?
  http://EU.computers.Toshiba-Europe.com

  I found a driver for Vista 32 bit and Vista drivers most also work on Windows 7 so it s worth a try! :)

• Satellite Pro U200 - sound to the headset only

  I have a Satellite Pro U200 and I install a Vista. I installed the audio driver, but there is no sound on the speaker just with headphones.

  Maybe the little switch that is placed in the headphone jack doesn't work properly.
  This option controls the output between the headphones and speakers.
  Try to plug and unplug the headset several times. Maybe it works then.

• Satellite Pro U200 - no noise, no brightness

  Hi how are you?

  I hope that you will be able to help me with a problem that is me not wanting to use my U200 to all leave.

  I've had the Satellite Pro U200 since a few months now & to be honest, just used it for the last 2 months. The reason is that the sound no longer works & the "upward brightness / brightness drop ' feature has stopped working."

  Here is what happened: I had a virus that was like Norton & installed a couple of other virus and Trojan horses. I managed to get rid of this, but has since not worked its brightness.

  I went through all the stuff help & diagnostics, and everything seems fine. The sound is supposed to come through the "Soundmax HD Audio" device, but there is no sound. When I check it I get 'this device is functioning. When I try to update the drivers, they are perfectly up-to-date. My volume is sufficiently complete.

  Can you suggest a potential cause / fix for this?

  To be honest, I tried everything and am at the end of the road, & think just completely reinstall the machine. Is it possible to reset to original settings? (I know PCs often have this ability).

  Thanks for your help!

  Daniel

  To be honest ;) I agree with Sylvain.
  The restore CD contains the operating system preinstalled with all the drivers, tools and utilities.
  Using the recovery CD you with redefine the laptop to factory settings.
  Then everything will work as should.

  But note; the recovery CD will format the HARD drive. If necessary, back up you data!

• Satellite Pro U200 - installing the audio driver on Win XP

  I have a Satellite Pro U200 and there is no sound - sound fine when attached to the DynaDock, but not when its autonomous.

  Device Manager there down as an existing audio device - I downloaded the driver audio from Toshiba Web site but when I try and install it says "the HD Audio bus driver is required and not found" I did a little research and found in necessary MS hotfix KB888111 which I installed it, but the audio driver will not even install - ideas?

  Windows XP must install patch KB888111 and KB835221 MS site before installing the audio driver.

  -so finally you need to install the two patches
  -Download Realtek audio driver from the Realtek page
  -remove the old driver its the laptop restart of Device Manager and install the new audio driver download

  Greetings

• Problems after Satellite Pro U200 has been accidentally deleted

  Hey,.

  I keep having problems with my laptop Toshiba Satellite pro U200. Problems started the laptop was accidentally deleted.
  I will try to describe here:

  Laptop started making noise like buzz... all the time.
  and it's really annoying. Never, it was so loud.
  Another strange thing, it is that we continue to be: after about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all windows just freezes. You can not move the mouse can not do anything, even ctrl + alt + del doesn't work, so I have to push turn off button for a few seconds to turn off the laptop.

  I don't know what I have to do?
  is this a hardware problem? If that's what should I change?
  If anyone has had similar problem please share what you know with me!

  Thank you very much!

  > After about 4 hours of running Windows, it starts to make the buzz of his stronger and ultimately all the windows just freezes
  I think there could be something wrong with the cooling module.
  Is that your fall, the computer laptop and, consequently, the cooling module could malfunction and might makes a strange noise.

  Usually, if don t cooling modules to work properly, the temperature rises to a higher level and finally the laptop begins to freeze due to a higher internal temperature.

  In fact, this is just my personal opinion and I can't say with certainty what s wrong.
  I think you should ask a technician for laptop for a short audit

  What I can say is that it really sounds like a hardware problem

• Satellite Pro U200 - how to access the BIOS?

  Hello

  HOWTO access / enter in the setup of the BIOS of Satellite Pro U200-PLUA1E-02802QS4?

  Hello

  I checked the forum and you should try to press the ESC key.

  It work? ;)

  Welcome them

• Satellite Pro U200 - projector as external monitor

  I try to connect a projector as external monitor. I use a HDMI adapter, VGA, because the entry in the projector.

  If I use an old laptop, it works OK.
  If I use my Satellite Pro U200, Modelo PLUA1E-02301RSP, the display shows only the initial screen,

  I mean the landscape with the TOSHIBA logo, but it doesn't change.
  If, for example, I look at some photos as I have both monitors running, the portable computer I see the photo, but the projector doesn't change, it shows only the landscape and logo.

  What can I do?

  Thank you and best regards,

  Vicente

  I put t know if I understand you right but perhaps extended desktop enabled. You must disable this option in screen resolution settings.

  Can move you the open Office Windows laptops to the pic you is on the projector?

• Upgrade SSD on Satellite Pro U200

  Hello!

  I have a laptop (Satellite Pro U200-PLUA1E-00X007HU of the v3.70 win7 32-bit bios), I want to upgrade with a series of Samsung 830 64 GB SSD. I read that the SSD need AHCI mode. My laptop supports AHCI mode? What can I change in the bios before installing the new storage?

  Thanks for the help!

  Robert

  Hello

  I see you're confused
  First, he must know that the laptop supports the SATA controller.
  This means that you must use hard drives SATA or SATA SSD.

  Second: AHCI means SATA some BIOS supports only a SATA mode, and you can switch between compatible (IDE) mode and AHCI (SATA) mode.

  If this switch is not available in the BIOS mode is always set to AHCI.

  However, to SSD drive question:
  I put t really no problem using an SSD.
  It must function as the SATA controller support

• Satellite Pro U200 - DC jack is broken

  Hello everyone

  I was wondering if you guys can help me because I broke the dc jack on my laptop, its load only when the pin of the charger is in it at a certain angle and I can actually feel the plug into my laptop so moving is not the charger. I tried searching on the internet but without success because I don't know the part number, and even if I put the serial number on the website of his not really give me the part number and may cause toshiba do more :(
  Now I'm looking for power supply for Satellite Pro U200-199
  Part number: PLUA1E-01900JEN
  Main features
  -Technology Intel® Centrino® Duo Mobile with Intel® Core 2 Duo processor T7200
  -Windows XP® Professional
  -100 GB hard drive
  -1 024 (512 + 512) MB of RAM DDR2 (533 MHz)
  -12.1 "screen Toshiba TruBrite® WXGA TFT
  -Drive DVD Super Multi (Double Layer) slim

  Any help would be greatly appreciated. only thing, I had an experience at the hardware level, but not very good with soldering, should weld or not it comes with the wire that can be clicked into place.

  Thank you

  In the past, I found several threads where people have reported the same issue but on the different model of laptop. Obviously some of them have done a good job and repaired only.
  To find the DC jack is not a problem.

  You can find it on eBay and it is cheap. Put in google DC jack U200 and you will find it.

  Problem is that any computer laptop must be disassembled and new connector soldered to the right place.
  Can you do this?
  I want to say if you n t have experience with this stuff don t touch anything and ask for professional help.

• Satellite Pro U200: unable to update BIOS to v.3.70 - WIN

  Model No.: Satellite Pro U200 PLUA1E
  OS: Vista Business SP2
  Current BIOS: v. 3.50

  Try to update the BIOS to v3.70

  When I run P0044v370, I get a Windows Script Host message:

  "Script:
  C:\ProgramData\Toshiba\Common\_cabBDF1.tmp\autoExe c.vbe
  Line: 2
  Char: 1
  Error: Failed to create object named 'WScript.Shell '.
  Code: 8007007E
  "Source: WScript.CreateObject".

  I want to update the BIOS before the upgrade from 1 GB to 4 GB of memory. Also my U200 Pro keeps crashing and whenever before it restarts, I get a message saying something like "try to install the latest version of the BIOS" (it is not on the screen very long sorry can't be more accurate).

  I don't have have the recovery CD, I'm trying to boost performance because it runs very slowly.

  Everything is - I am in your forum people good hands! Thanks in advance.

  You have what Windows OS installed.
  It is Win XP?

  Update the BIOS needs an installation of the common Modules, so don't forget not that the common Modules are installed or this software update.
  The CM is on the page of the European driver Toshiba

  In addition, the P0044v370.exe unpacks the package I recommend creating a folder on the desktop and to decompress the files in P0044v370.exe first. Then move to this new folder and run the exe file in the folder.

• Need new battery for Satellite Pro U200-182

  Hello

  I m needing help on the purchase of new battery for Toshiba Satellite Pro U200 - 182
  No model origin. what I found on old battrey is PA3356U - 3BRS with parameters: DC10.8V - 4700mAh

  When I tried searching on the web I found that this trick
  http://smart-parts.NET/bsearch.php?brand=Toshiba&name=satellite%20PRO&SER ie = U200% 20Black & model = U200-182

  I would like to ask if I can buy it (if this battery will be compatible) and also if its possible to buy the battery longer "life."

  Thank you for the help

  I found the info that for your laptop model there are two types of battery only:
  PA3356U-3BAS
  PA3356U-3BRS

  So if you use Google and put these numbers, you should be able to find an online store where you can buy these compatible batteries.
  By the way: link you posted is OK and I don't see the reason why you shouldn't order of it. It is listed as compatible.

  To extend the life, you need battery with more cells and ability, but it is unfortunately not available for your laptop model.

• Satellite Pro U200: Display Resolution changed to 1024 x 768, after sleep (Vista)

  I have some problems with my Satellite Pro U200 (WinVista, BIOS 3.50, Display Driver 7.14.10.1217).

  After the exit mode standby, the display shows the correct resoluion of 1280 x 800 for a second and then goes to 1024 x 768. It's very annoying.

  I tried to uninstall / reinstall the display driver, but it did not help.

  Does anyone have an idea?

  Well, I remember a similar problem happened on U200 with Windows XP and Windows XP MCE.
  The update of the graphics to the version 6.14.10.4543 driver has solved this strange switching

  Maybe the next update of the graphics card driver will clear this issue

• I need the last CD of Microsoft Office - Satellite Pro U200-125

  I just bought Satellite Pro U200-125 without the last set of Microsoft Office CD. Does anyone have this CD?

  Thank you

  Musallam

  Hi Musallam

  Sorry, but what you mean with last Microsoft office defined? Office 2007 perhaps?