How to install on my external hard drive which is my lightroom 4?

Similar Questions

• How to install games on external hard drive applications

  Hello people,

  I have my app game downloaded from the app store called rack 2 & I transferred to my USB key. Noting that the loading of the game takes too long, I decided to transfer it to my external hard drive. After the transfer of the application of game on the external hard drive, it does not start. So, I decided to reinstall the game by downloading it again from the store, but my disk space.

  So, I have in fact TWO problems:

  (1) how can I reinstall the application to an external hard drive? and...

  (2) how to free disk space on my hard drive internal by disabling certain files on "people"?

  If someone could shed some light on me here, it would be highly appreciated.

  Thanks in advance,

  M

  -------------------------------------------------------------------------------- ---------------------

  -System chart-

  OS X El Capitan

  10.11.5 worm.

  MacBook Air (13 inch, early 2015)

  Intel Core i5 to 1.6 GHz

  DDR3 4 GB 1600 MHz

  Macintosh HD

  Intel HD Graphics 6000 1536 MB

  -------------------------------------------------------------------------------- ---------------------

  -External hard drive-

  Backup drive Seagate Plus (external 1 to USB Disk)

  -------------------------------------------------------------------------------- ---------------------

  You should never get too low on your space of hard drive as the OS needs a minimum 10-15 GB of free space at any time to work properly. So, if you do any movie or image/photo, rendering and editing editing works best if you have at least as much vacuum you have temporary files in your project. I can easily raise 100 GB or more temp. files for a one hour film HD, so I keep a lot of empty hard disk space.

  In order to get a few things on your hard drive, the usual space hoggers are therefore, movies, photos, etc. You can move all those who in their library on an external hard drive, and after having checked they are working, delete them from your hard drive.

  Generally, the application work better if they are installed on your internal hard drive; I'm not a gamer, so I'm not familiar with the specifics of the game you're talking about. Search on Google, I couldn't find any reference to the Macs on their website - here, it shows the platforms it is compatible with:

  

• How can I stop my external hard drives being renamed by Lightroom?

  Since early December, I had countless problems with LR and my external hard drives. I have 3 all Western Digital external hard drives, 2 x 320 GB passport and 1 x 1 TB elements. I called the hard disks of the computer named them when I first installed them (E & F). Since then the LR calls what he wants when I plug them so there are always question marks next to my photos as LR think I plugged a different hard drive.

  Although I don't have 1 x 1 TB hard drive WD Elements LR called something different if I unplug it and plug it in again then it starts and then trying to find all my pictures.

  My partner has no such problems as he never unplug his hard drives, but I need that sometimes I'm working on a laptop with the same LR catalog, if I work, so I take a drive with me with the images.

  I could do with:

  (a) a method of naming, my hard drives from WD for LR acknowledges that are connected

  (((b) a very simple digital workflow - I have many books of LR but need a genius LR say 1) cela 2) do this etc - I have about 30 000 pictures and even without the hard drive problems make me a bit stuck trying to be organized - I am a photographer not an administrator and I'm really bad on the organizational side.

  Help, please, I'm drowning in technology - ps I love Lightroom!

  So the question is probably WIndows XP. When you attach a remote drive, Windows XP can arbitrarily assign it to one of the drive letters D: through Z: assignments. A: and B: are reserved for floppy disk drives, and C: is usually indicated on the startup disk where Windows XP.

  The drive letters change generally when you plug external drives in different order. So if you have DriveA and DriveB, and you plug in DriveA then DriveB, then DriveA can get assigned D: and DriveB may be assigned E:. If, however, one branch in DriveB first then DriveA, the order will probably flip over in which case Lightroom lose track of all the photos he had previously in location D: and E:.

  The solution is to use the windows Disk Manager to force the assignment of drive letters. See http://support.microsoft.com/kb/307844 for more details. Set mailbox that uses Lightroom.

  A problem you may encounter is if you connect a new drive, then attach your photo disks. I believe Windows will give you the new drive D; slot, since it is not used, but then randomly divided the photo viewer because it is defined location is not available. Windows is a manager of poor things, Apple is not.

  The solution is to always attach the disks in the same order, and Windows will affect the drive correctly, assume a has completed the tasks in article.

  Another approach is to use the Windows mount command. If you're brave, see http://support.microsoft.com/kb/205524.

  John

• Dual-boot Windows XP is installed on the external hard drive

  My computer has Windows XP and Windows 7 installed. I added a hard drive with Windows XP is already installed on the computer.

  In order to access additional hard drive, I need to change the priority of the hard drive in the BIOS.

  Is it possible to add a boot option to the Boot Manager screen so that I can boot from the additional hard disk without modifying the BIOS settings?

  First of all, to the best of my knowledge you should not change anything in the bios to access the external drive.

  Second, if Xp has not been installed on the external hard drive while the drive is connected to the computer in question it will not be loaded. Simply, it does not work like that. Even if you install Windows on the outside when it is connected to your computer, I don't think it must configure the boot.ini file, giving you the ability to dual boot when the computer is turned on. You can boot from the external drive provided however your bios supports booting from a usb key. I think that to accomplish what you want, you will need to remove the hard drive of the external envelope and attach it to your computer using an eSATA cable. Then it will be recognized as a regular system disk.

• How to disable for the external hard drive restore point in Windows 7

  System Restore performs a restore point for my external hard drive, which I did not need, how to change that?

  Hello

  Click Start, right click on computer and select Properties.

  In the left menu, select the System of Protection.

  In the Settings of Protection section, click on the external drive letter.

  If the external disk drive appear on protection, click on the Configure button.

  Select the option to disable the Protection system for this drive.

  Click Apply/OK.

  This should return all the disk space used for System Restore on this drive.

  Let us know the results.

  Concerning

• I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now want to import some RAF b HD files

  I use LR 6.5 on an iMAC. Files RAF Fuji originally, I imported from an SD card worked and exported in the form of PSD and then after saving the files on an external hard drive RAF erased from Lightroom. I now have to import some RAF of the HD files but LR shows them as dazed out and said that they have already been imported when I hover over the thumbnail. I have this problem when importing files in the same HD Canon CR2, and who have been treated exactly the same. Anyone got a clue as to why this is happening? Thanks, Phil

  Hi Phil,

  If Lightroom then reads these as duplicate files, it shows that they are already present in your Lightroom Catalog.

  You can search by file name and check if the image is present in your library.

  Kind regards

  Claes

• Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the

  Recovery of DNG issue: I have photos stored on an external hard drive which have previously been imported into Lightroom and converted to DNG.  The laptop on which I was running Lightroom died and I had to replace the hard drive and rebuild the computer.  In the process of my Lightroom program and catalog related to these images have been lost.  When I re-associate these photos with my new installation of Lightroom and a new catalogue is there a way to retrieve the keywords or other changes or metadata catalogue Mountaga?  Is any of this information embedded with the imge DNG file or was it only in the cataloght lost on my failing hard drive? I re-import just as if it were new images with no prior treatment of Lightroom?

  By default, LR saves all changes in the catalog, and that applies to any type of file.

  Optionally, you can save changes to the file as well, for raw files owners, this will create a xmp file - for DNG that changes are going to be cooked in the file, without additional xmp file.

  But it does not default. Go to the catalog and parameters under the control of metadata automatically save changes to XMP.

  Unless you do this, the changes are saved only in the catalog.

  Hope this makes things clearer.

• How to use the book of fonts with fonts that are installed on the external hard drive

  I have all my fonts to a folder on an external hard drive. How can I use font book to manage these fonts? I want to keep on the external hard drive, not book fonts move them to my main hard drive. For some reason, font book does not know where are the fonts and as soon as I show, he sets in motion all the fonts on my hard drive in a folder/library/fonts. NOT what I want! I don't want thousands of fonts clutter up my main hard drive. I just can't understand how the font book. Only option, I can see, it is 'Install' and it is then the copy begins. I read and tests all day and I just can't understand this. Thanks for your suggestions.

  Font book handles only the fonts that are present in one of the folders of fonts on the startup disk. It can disable these fonts, but it won't work as a custodian of the fonts installed also. I would have suggested using a symbolic link to the folder fonts on the external drive to ~/Library/Fonts, but apparently that no longer works: allow to use symlinks in ~/Library/Fonts

• Where and how can I reinstall the external hard drive to the new HD to the computer?

  Original title: HD crashed.

  I want to thank the person who answered my question about the HD crashed I saved all my data and window xp. My next question is, how and where can I reinstall external hard drive for the new HD to the computer? Should I send it to drive c or where? I'm not strong when it comes to computers. I know just enough to get me in trouble. Thank you.

  Hello!

  You will need to use a full copy of Windows XP.  Should be a sticker with the product key on the side of your desk or below if it is a laptop.

  Once you have this drive, you can reinstall Windows XP.  After you have installed all the software and drivers, you will be able to transfer all your data to the new HARD drive.

  If you don't have a copy of Windows XP, you can probably get a copy of the recovery from the manufacturing of computer media.  Just to provide the model and serial number and they should sent it.

• OK, how can I access my external hard drive after plug it into another computer? Original computer crashed.

  How do I get my new computer and I need access to my external hard drive? Original computer crashed and now I get a message saying ".

  Hi John and Missy Verhoog,

  1. What is the error message you are getting?

  2 have you checked the State of the drive in Device Manager?

  Check to see if the external drive is getting detected in Device Manager.

  a. Click Start, type devmgmt.msc and press to enter.

  b. find the name of the drive in the list of Bus USB controllers.

  c. right click on the device, and then select properties to view general information about the drivers.

  You can also read the following article and see if it helps:

  Install or remove a hard drive

  Hope this information is useful.

• How to install games on extended hard drive

  Original title: Ive bought a large hard drive and would like to know how to install my games purchased on the internet, but also my collection of dvd on my hard drive. Its connected properly approved system it

  Help please try to install my games on hard drive extended as ive bought on line, but also my dvd also collectrion

  Please describe what happens when you try and what you mean by "scope of hard drive. Do you mean an external USB disk? If Yes, then you don't want to install programs on it because it will be too slow. It will be perfect to store your data, however.

  Help us help you:

  http://www.elephantboycomputers.com/page2.html#Tech_Support - See the article "how to write a Post.
  http://support.microsoft.com/default.aspx/kb/555375 - how to ask a Question

  MS - MVP - Elephant Boy computers - don't panic!

• Point how to backup to another external hard drive?

  Running Win7 Home premium on a 64-bit dell.

  Under the backup and restore, I pointed one of my hds external usb backup. My backups are big and this drive is smaller. It fills up very quickly. I would like to re - emphasize traced back to one of my other bigger usb drives. How do I do that?

  When I try to access the backup through the menu approach application, I get a status windows backup failure:

  «the backup application could not start due to an internal error: the specified service does not exist as an installed service.» (0x80070424).»

  In my view, this means that I have a piece missing or corrupt Windows.

  a. How do I do to re-pointing backup to another external hard drive?

  b. How can I do to test / fix this error?

  Thanx.

  HI Milton,

  Thank you for your reply, I appreciate your efforts to try to resolve the problem.

  I suggest you run a sfc scan and check if it helps

  Follow the link below.

  http://support.Microsoft.com/en-us/KB/929833

  It will be useful.

  For other post help back, we will be happy to help you.

• Question: How can I format an external hard drive

  I am trying to use an external hard drive with Time Machine.  He tells me that my external must be formatted in a format "journaled". I can't find any way to do it and the Mac is do not do it either. Can someone tell me how to proceed so that Time Machine works to put in shape?

  If Time Machine is not reformat the disk itself, choose Utilities in the Finder Go menu, open disk utility, select the drive in the sidebar and delete it.

  (144913)

• How to transfer bookmarks to external hard drive

  I need to transfer all my favorites from Mozilla Firefox Version 39.0 to a Toshiba external hard drive. Please inform me on the steps. There is no "organize bookmarks" anywhere on the titles of browsers. So I'm a bit lost and I have a few days to accomplish this task.

  See:

  • https://support.Mozilla.org/KB/restore-bookmarks-from-backup-or-move-them
  • http://KB.mozillazine.org/Backing_up_and_restoring_bookmarks_-_Firefox

  Note that "Organize bookmarks" was unused for some time in the version of Firefox.
  It is now under "bookmarks > show all bookmarks.
  View that all bookmarks is found in the drop-down list of the 'Show your bookmarks' button that is placed next to the star in the Navigation toolbar.

  • https://support.Mozilla.org/KB/how-do-i-use-bookmarks

• How to work with several external hard drives?

  There is only a single usb port 3 on the MacBook Pro, how to use several external hard drives at the same time? It must be possible somehow, otherwise the machine is useless for video editing for example.

  Get a usb hub 3.

  https://www.Google.com/search?q=USB+3+hub & ie = UTF-8 & oe = UTF-8