How to install the AHCI on R2 AREA-51

Similar Questions

• Windows 7 Pro (64 bit) has no install the AHCI Driver

  When I built my current computer system in May 2011, I have not encountered this problem with installing 64-bit Windows 7 Pro on the new 500 GB Western Digital HARD drive.  In fact, I installed Win7 three times (to wipe the drive with DBAN after the first and second installs) before I was satisfied with the third installation.

  Before the first installation, I configured the BIOS of card mother Gigabyte GA-890FXA-UD5 (Maj) SATA AHCI (with SATA 3.0) and copy the driver AHCI of CD Gigabyte on a SanDisk Cruzer USB (4 GB).  The GA-890FXA-UD5 (revision 2.1, version of the F6 BIOS) has an AMD chipset.

  During each installation, the Win7 Installer reported that she could not find a HARD drive and offered the option to load a driver.  I used this option, and the installation program displays a dialog box with whom I sailed the Cruzer to select AHCI driver.  Each time, Setup loaded the driver with success smoothly.  Of course, I still have the installation of Microsoft Windows 7 Pro DVD, purchased with a full license of the retail.

  Example: two years later, after that I started to meet various problems for which I could find no cause, no resolution, I suspected malware or corruption of the registry.  To make a long story short, eventually I decided to erase the internal HARD drive once again, after you save the data files on an external USB HDD.

  Win7 Setup now follows the same routine, of course.  Except that now, it will fail to load the driver AHCI of the SanDisk Cruzer (!).  I've also removed the Win7 installation DVD, loaded the CD Gigabyte, sailed to the driver and selected.  The Win7 Installer is always not load.  In addition, before you run the Win7 Installer for other attempts, I connected the USB HDD external and sailed to a copy archived AHCI driver on it, but Win7 Setup could not load.  I have made many and repeated attempts, with all the storage media at hand, that contains a copy of the driver AHCI files, but not joy.

  For what it's worth, I also ran the software on the repair disk I did shortly after installing Win7 Pro, and he couldn't load the driver AHCI of the SanDisk Cruzer with CD Gigabyte, respectively.

  Then I reconfigured the BIOS of the motherboard to SATA IDE (with SATA 3.0) and rebooted the system.  You might think that Win7 Setup would have a suitable driver for the AMD SATA IDE, since she has one for the reader to optical disc Samsung DVD-Writer (obviously), but it did not find a HARD drive.  Then I sailed in the appropriate driver AMD x 64 on the CD of Gigabyte IDE files, but Setup cannot load it, too.

  Question: why Windows 7 Pro 64-bit Setup does not install the driver AHCI, and what can I do about it?

  Hello

  Thanks for posting your query on the Microsoft Community.

  AHCI (Advanced Host controller) makes the NCQ (Native Command Files) with connection to warm or hot swapping through host controllers SATA Serial - ATA possible; Vista was the first to offer this feature. The problem with AHCI is that it must be enabled in BIOS before the installation of the OS. After installing the operating system will disable the PC. The reason why Windows disable the AHCI drivers not not needed during installation.

  I suggest you activate the AHCI after installing the operating system if you already enable AHCI in the BIOS, when you installed the operating system.

  Warning: This section, method, or task contains steps that tells you how to change the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  322756 (http://support.microsoft.com/kb/322756/ )
  How to back up and restore the registry in Windows

  1. in the window for the start menu search box, type regedit, click with the right button on the entry, click run as administrator, enter your credentials of the user for the UAC prompt, and then click Yes to Open regedit.
  2. in regedit, navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services.
  3. in the left pane, click msahci, in the right pane, double-click Start to change.
  4. in the window that opens, change the value to 0 (zero), and then click on OK.
  5. in the left pane, click on iaStorV (if he), in the pane, double-click Start to change. Repeat step 4and continue with step 6 below.
  NOTE: From: Error Message Occurs after you change the mode of the boot drive SATA
  6. close the registry editor.
  7. now you will need to reboot the PC and go into the BIOS and enable the AHCI. When Windows starts, it will finish installing the AHCI drivers.
  8. you will need a final restart to complete the process once the drivers are installed.

  We hope that this information helps to let us know the State of the question, we will be happy to help you.

• How to install the patch for the security hole last QT process running on a Dell with Windows 7 (Windows 10 upgrade) laptop? I got a message from my program called Belarc that the patch is missing on this device. Thank you

  How to install the patch for QuickTime Pro for Windows 7 on a Dell laptop... I got an alert through a program which I run from time to time (Belarc) and it says that there was a security breach detected by Apple (or one of its vendors, who manages the security of the operating system such as Cisco) during December 2015.

  Please notify.  Thanks in advance for your guidance pertaining to my question.

  Download QuickTime for Windows - Apple 7.7.9

  Apple ends development of QuickTime Player 7 for Mac and Windows operating system, so don't expect much more beyond this last version.

  The installation shows are supported for Windows 7 and lower, so I don't know what to expect on Windows 10.

• Satellite L655-1FO - how to install the audio driver?

  How to install the audio driver on my l655 1fo? I download the driver of toshiba, but it cannot start. Can someone help me how to install it on Windows XP. Thank you

  Hey,.

  Before starting with the installation of the driver it is important that you install Service Pack 3 for Windows XP, because it contains important updates for cards high definition sound. Otherwise, you are not able to install audio driver.

  Download & install SP3 and then you can start with the driver installation :)

• How to install the latest version of the BIOS Tecra m2

  How to install the latest BIOS P000Bv160 on a M2. install toshiba BIOS instructions say to use a floppy disk, but the file size is 1.48 MB so not fit on a 1.44 MB diskette. can I use a USB?

  Are you sure that you have read the statement on the right?

  AFAIK it's win-BIOS version (windows version) and not a version TRAD (traditional), so the update of the BIOS must be running OS.

  There should be an exe file that must be executed to start the update of the BIOS!

  Please check the instruction again!

• Install the AHCI driver after XP installed for T400

  I searched and found different thread on how to install the SATA/AHCI drivers after installation. The thinking seems to be to run the file Install.cmd from the Intel Matrix Storage Manager download. However when I run this file, shut down the computer, change compatibility to AHCI in the BIOS, then try to start Windows, I just get a blue screen at startup no matter what I try. Any thoughts / ideas? And thanks in advance.

  Problem solved, Lenovo has posted the wrong link for Intel Matrix storage drivers in the matrix of T400 driver.

  Fix the drivers below:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-70477

  Runs like a champ now.

• How to enable the AHCI for HP ENVY TouchSmart m6-k015dx Sleekbook

  Hello

  I upgraded my hard drive to an SSD and it's done. Laptop works very well.  The Samsung SSD software installed and it says that I need to enable AHCI to get the SSD running at full capacity.

  I searched the BIOS and don't see anywhere to change that.  I then went to the Device Manager in Windows 8.1and I don't see any ATA/SATA controller.  All I see is a RAID controller. RAID controller in a laptop?

  Can someone tell me how to activate the AHCI?

  Thank you.

  

  Hello:

  Because your laptop is a portable consumer there is no way to change the BIOS to AHCI setting.

  The BIOS is set by default for RAID on your model series because some models come with one of these drives covering with a SSD and for a technical reason, that those who must be configured in RAID 0 mode so that Setup work right.

  It is my understanding that if you install the latest driver Intel RST, which is supposed to support TRIM SSD starting with the Intel 7 series chipset, and yours has series 8, so he must have full support for one SSD usage even in RAID mode.

• Do not install the updates downloaded, they are put to day security, also updated Vista, also update the junk e-mail filter

  Vista: Do not install the updates downloaded, they are day security, also updated Vista, also update the junk e-mail filter. Other updates are installed. But these not installing. These updates: update for Windows Vista (KB2679255), update for Windows Mail Junk E-mail Filter [April 2012] (KB905866), a security update Cumulative for Internet Explorer 9 for Windows Vista (KB2675157), update security for Windows Vista (KB2653956), a security update for Microsoft .NET Framework 2.0 SP2 on Windows Vista SP2 and Windows Server 2008 SP2 x 86 (KB2656374)
  Please if you have an answer.
  Thank you
  Michael.

  Hi Michael,

  ·         You receive an error message or error code?

  Follow the suggestions below for a possible solution:

  Method 1: I suggest you to consult the article in the Microsoft Knowledge Base and check if it works.

  You cannot install some programs or updates

  http://support.Microsoft.com/kb/822798

   

  Method 2: If the method above does not help, then you can reset the Windows Update components and check.

   

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Let us know if that helps.

• I need someone to show me how to install the scanner

  I need someone to show me how to install the scanner

  Contact the manufacturer of the Scanner.

  They should have a manual/Instructions online for you on how to install their product.

  If they are not: Email/phone them.

  See you soon. Mick Murphy - Microsoft partner

• How to: install the driver for scanner "visioneer onetouch 8920 usb" diskless

  Original title: is there a way to get a "driver" for my scanner "visioneer onetouch 8920 usb", other than the dish that comes with it? (I have no disc drive for my netbook)

  I recently got a netbook, the Acer aspireone running windows 7 starter edition, I have a scanner, visioneer onetouch 8920 usb. the netbook I have has no disk drive, I plug the scanner and windows cannot load the driver.  I need help to find how to install the driver, so I can use this scanner.

  Driver download page (but the latest drivers for XP - they will probably not work):
  http://support.Visioneer.com/products/8900/downloads.asp

  Troubleshoot Compatibility

  This can help with some (but not all the) programs/drivers:

  (1) uninstall the program, if it is already installed. Then when install you / reinstall instead of double click on the Setup file, right click and select 'resolve compatibility issues.

  (2) then click on 'Try recommended settings' and in the next window, click on "Start the Program" to install it.

  (3) after he set up see if it works properly. Note: some programs are perhaps not able to run in windows 7.

  More information on how to make older programs in this version of Windows:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

• How to install the previous version of sound recorder for windows - the windows sound recorder 7 isn't good

  How to install the previous version of sound recorder for windows - the windows sound recorder 7 isn't good

  Hi Harold,.

  Which is exactly the problem that you are facing with the sound recorder in Windows 7?

  You will not be able to downgrade the version of sound recorder for Windows in Windows 7.

  To learn more about sound recorder in Windows 7, see this link:

  http://Windows.Microsoft.com/en-in/Windows7/record-audio-with-sound-recorder

  To fix the fundamental problems with the tape recorder for Windows 7, see:

  http://Windows.Microsoft.com/en-in/Windows7/open-the-recording-audio-Troubleshooter

  Let us know if it helps.

  Thank you.

• How to install the graphics card Nvidia Quadro 4000 in Dell R710

  Hi all

  I read a lot about the installation of the Nvidia Quadro PCIe x 16 card in a Dell R710.  I know what parts I need to order (Dell GP347 PCI-e left Riser), but I don't know how to install the power cable 6 pin required by the Nvidia card.  Where would connect it to the motherboard Dell R710?  Is there a place to connect?  If not, is there some type of power provides I can hang the 6-pin power Cable from Nvidia and power the server?  Any help would be appreciated.

  It's a bit old now, but thought I would answer that I had this work and very happy with the performance!

  In addition to editing card, that I needed, there is NO way to provide the power that the card must provide without a power SUPPLY.  There is a really small box listed on Newegg called "ePOWER EP - 450CD 450W ATX12V/EPS12V modular juice dedicated to the area of graphics card and CPU of power".  Buy and run the GPU power cable to an empty PCI slot at the back of the Dell server.

  I also bought some video cards NVidia Quadro 4000 2 GB GDDR5 PCIe for each of my 5.5 ESXi servers. Also, I left my active integrated video graphics card and it is always primary for my hypervisor.

  Download and install the NVidia ESXi drivers on their site and follow the directions to install.  Reset.

  I use sVGA with my Horizon offices and downloaded a trial version of Sketch-Up to test the 3D.  They have a community of users who post 3D renderings and you can download it directly from the Sketch-up program.  Cruise around and check the performance.

  As a side note, I noticed IE worked worse way by using the GPU when browsing the internet.  Go to settings, advanced in Internet Explorer and has the option at the top of the page "use rendering software instead of GPU".  This change makes IE works as expected.

• I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer

  I currently have Adobe Pro XI, but I get a new laptop, how to install the software on the new laptop computer

  Hi Victor,

  If you are referring to Acrobat Pro XI, you can download and install from here: Download Adobe Acrobat products. Standard, Pro | DC, XI, X

  Kind regards

  Rahul

• How to install the specific font of our company with photoshop?

  How to install the specific font of our company with Photoshop - it's the police of Gotham?

  
  

  The fonts are installed in your operating system not Photoshop.  Photoshop uses the fonts installed on your machine.

• How to install the free trial version on a second computer?

  How to install the free trial version on a second computer?

  Download the 2nd computer installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
  • Acrobat: DC | XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 10, 11, 12, 13. 9,8,7
  • Lightroom: 6| 5.7.1| 5 | 4 | 3 | 2.7 (win),2.7 (mac)
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  window using the Lightroom 3 link to see these "important Instructions".