How to install the codec, DNxHD and Cineform? (Lack of SOUL 6)

Similar Questions

• How to install the Codec OpenH264 of Cisco?

  I noticed that almost every time I start my computer and open every night I get a popup to download to download the codec OpenH264 by Cisco. I did and I noticed that there was an entry for it in the Add-ons Manager Plugins section and it says "will be installed soon. He had me download is a zip file which contained two files. The one who gave a short explanation of the codec and a libgmpopenh264.so file. Now, I have no idea what do with the .so to obtain file installed it in every night.

  Does anyone else have this problem and what can I do about it? I am running Xubuntu 14.04 64-bit.

  I see Pref media.gmp - gmpopenh264. * on the topic: config page.
  Media.GMP - gmpopenh264.path displays the installation path that points to the gmp-gmpopenh264 file in the Firefox profile folder.

  Bug 1009909 - Firefox desktop: integrate the media openh264 plugin in the Add-ons Manager
  Bug 1032814 - plugins Gecko media shouldn't use of well-known places for plugins

  There is also a media.gmp - manager. * Pref.
  https://wiki.Mozilla.org/GeckoMediaPlugins
  Bug 957928 - support of Plugins Gecko of the Media (GMP)

• How to install the spectral measures and Modulation for several versions of Labview Toolkits

  
  

  Hello dear,
  This is a known issue. You can read in the readme of the modulation toolkit:

  Two Versions of LabVIEW installed
  The installer supports the installation of the Modulation Toolkit into one
  version of LabVIEW; installation of the tool in several separate
  facilities (e.g. LabVIEW 7.0 and 7.1 installed LabVIEW LabVIEW
  on the same PC or in separate directories) is not supported or recommended.
  A way not supported to do but involves manually copying files from
  one LabVIEW installation to another. To do this, you can install the
  Modulation Toolkit to the base of a LabVIEW installation directory, and
  then manually copy the files installed in the other installation of LabVIEW.
  The following list includes files and relevant directories. Copy all the files
  These directories, including subdirectories, using the equivalent
  paths related to the House LabVIEW directory for the target.

  \vi.lib\AddOns\Modulation\*.*
  \vi.lib\AddOns\NISML\*.*
  \examples\Modulation\*.*
  \resource\objmgr\NIMTAttribs.RC
  \resource\objmgr\NIMTAttribs.RCH
  \help\lvmod.txt
  \help\lvmod.chm
  \help\lvdmt.txt
  \help\lvdmt.chm

  Note that this list does not include installed files. Also, copy
  the files in this way is not equivalent to a complete installation in the
  another version of LabVIEW. Especially own error text to the
  Modulation Toolkit will not be updated and the example Finder ads will be
  the examples of Modulation Toolkit.

  Jerome

  "CherieC" wrote in message news:
  [email protected]...
  > I installed NOR-RFSG, NOR-DAMA, the Spectral Measurements Toolkit, as well as the
  > Modulation Toolkit.  I have two LabVIEW 7.1 and 8.0 installed on my
  > system.  I developed an application in BT 8.0 and now I need to come back
  > to LV 7.1.  The problem I have is that the add-on toolkits appear to
  > only have been installed for LV 8.0 because there are several missing screws
  > and control when I try to open the LV 7.1 version.  I tried
  > re - install tool boxes, but this is not solved the problem.  How
  > can I get the installation program to install the toolboxes for two versions of
  > LabVIEW?
  >
  > Thanks for your help,.
  > Honey

• How to install the compiler weblogic and froms in redhat 6

  Dear gurus,

  I have db oracle 11.2.0.1 on redhat Version 6 and I develop forms/reports (Forms [32 bit] Version 11.1.1.2.0 (Production)) under windows, all operations are working well until I have access the form via the Internet Explore.

  Now I want to spend the only form of publication in RedHat server, I'll develop forms in windows and then move on to the RedHat server to access forms of RedHat server.

  My question is

  (1) what steps/facilities do I need to compile forms in RedHat make compatible FMX for RedHat file server.

  (2) what steps/facilities I have to publish to / reports in RedHat 6 so users can access them from RedHat server.

  I'm not very good in all those things I always get information on internet and perform my tasks. Help, please.

  Thanks in advance.

  Mr. Khurshid Khurram

  Hi Khurram

  Please follow the doc ID and the following documentation: -.

  (1) what steps/facilities do I need to compile forms in RedHat make compatible FMX for RedHat file server.

  How to install Oracle Fusion Middleware 11g forms & reports only [ID 854117.1]

  How to install Middleware 11 g Rel 1 Oracle Forms / Reports Services alone [Video] [1088873.1 ID] --> this one is good

  For the compilation: check belo note:

  Batch compile the Script for forms, reports, libraries, Menus and also the conversion of binary and text (Doc ID 955143.1)

  (2) what steps/facilities I have to publish to / reports in RedHat 6 so users can access them from RedHat server.

  http://docs.Oracle.com/CD/E23943_01/Web.1111/e10240/TOC.htm

  http://docs.Oracle.com/CD/E23943_01/bi.1111/b32121/TOC.htm

  Kind regards

  Prakash.

• How to install the sound drivers and graphics on my Equium L40 - 10Z?

  OK here is the deal, I have everything works pretty well except the sound. Its the map analog Inc. I have on this laptop and not the Realteck one. In my opinion, he's also under the name of SoundMAX. Summer looking for the driver on google for hours now, if someone can tell me if they have managed to get their functioning and how?

  Also on the graphics, I'm not fussed, but if anyone has any info on this, it would be great.

  Someone knows the specifications of the chip, card mother etc for this laptop, so I can download the drivers for the chipset.

  I use Windows XP Service Pack 3!

  Thank you

  Hello

  Sorry, but I must ask you this: why you n t use WXP drivers available on the Toshiba support page?
  I can see all the drivers of Windows XP Home edition are listed for Equium L40 under http://eu.computers.toshiba-europe.com

• How to install the vcdrom.exe and the sys file.

  I installed vcdrom.exe and copied vcdrom.sys to windows/system32/drivers as indicated, but when I try to select vcdrom.sys list drivers install this is not yet visible. but when I go to the site ouside the program I think it's no problem, I tried to run the program as administrator, I tried to adjust the file sys in total control, and it makes no difference. What should I do?

  There is actually an updated version that is supposed to work with Win7

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=38780

  Right click on the file vcdcontrolTool.exe and choose run as administrator removes the "could not open SCM: access denied" message, but VCdRom.sys is still not visible in % windir%\system32.

  Apparently, it is simply not compatible with x 64 versions... even if you run it high and try to load the copy of the driver on the left file in the subdirectory to decompress (which is no problem), the message 'the driver has been blocked from loading.' results. Maybe some MVP re / writing he forgotten kernel mode code signing or will not pay the annual dues ($ 400?) to MS for the signature of x 64 drivers.

• How to install the VPN Client and the tunnel from site to site on Cisco 831

  How can I configure a Cisco 831 router (Branch Office) so that it will accept incoming VPN Client connections and initiate tunneling IPSec site to site on our hub site that uses a VPN 3005 concentrator?  I could get the tunnel to work by configuring it in a dynamic encryption card, but interesting traffic side Cisco 831 would not bring the tunnel upward.  I could only put on the side of the hub.  If I use a static encryption card and apply it to the external interface of the 831 I can get this working but then I couldn't get the VPN Client to work.

  Thank you.

  The dynamic map is called clientmap
  The static map is called mymap

  You should have:

  no card crypto not outmap 10-isakmp ipsec dynamic dynmap
  map mymap 10-isakmp ipsec crypto dynamic clientmap

  interface Ethernet1
  crypto mymap map

  Federico.

• How to install the video codecs on my computer to watch a Webinar

  I am trying to connect to a webinar and my computer says that I don't have a codec installed on my computer.  How do we install

  Are you a specific error code or any codec specific name or number while trying to watch the webinar? If Yes, then you can make use of these details to find the codec on the internet.

  The following links may be useful to learn more about how to install a codec:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/how-to-locate-and-install-codec-for-video-files/469867bc-4C49-4b73-8d7f-bde6dedfbf90

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/need-codec/4cfccdce-CEF5-450b-92c9-f7296bc20098

• How to install volume control program and retrieve the sound icon in the start bar

  How to install volume control program and retrieve the sound icon in the start bar

  He runs this Microsoft Fixit usually solves http://support.microsoft.com/kb/319095

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

• codec error, I get the message (file cannot be imported because the codec required not installed) how to install appropriate codec?

  original title: codec

  I have windows vista Home premium.  I get the message (file cannot be imported because the codec required not installed) how do we install the right codec

  ... How to install appropriate codec

  There is an excellent set of codecs available here.

• WHERE to download and how to install windows 8 oem and register with the key from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  My friends sony vaio has been formatted it has not support recovery pls tell me WHERE to download and how to install windows 8 oem and register with keys from the BIOS

  See here, make sure you download the correct edition:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

• How to install the output in bridge CC module using an apple OSX 10.9.5 and a miss apple OSX 10.11 this point completely in CC bridge!

  How to install the output in bridge CC module using an apple OSX 10.9.5 and a miss apple OSX 10.11 this point completely in CC bridge!

  Hi abev41080082

  Greetings.

  • Please visit this link and follow the instructions
    • https://helpx.Adobe.com/bridge/KB/install-output-module-bridge-cc.html
    • Output Module (bridge CC) works only on Mac

  Concerning

  Rohit

• I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  I bought the version of Acrobat that allows you to edit PDF files.  I currently pay $15 / month.  I bought a new computer and downloaded the free version of Acrobat.  How to install the version that I pay $15 / month?

  Launch Acrobat, on the first window, click on "license this software" and enter your Adobe ID, associated with the subscription and password.

• I had to replace the hard drive on my computer and lost the installation that I pay every month for. How to install the Adobe Acrobat Pro XI on the computer again?

  I had to replace the hard drive on my computer and lost the installation that I pay every month for. How to install the Adobe Acrobat Pro XI on the computer again?

  You can download using any one of the 3 methods.

  But if it's XI Acrobat Standard, only the first step will work.

  For Acrobat Pro XI, you can use one of the 3 methods.

  1)

  Sign in to www.cloud.acrobat.com

  Then sign Adobe ID and password, and once logged in, click on the Acrobat button, it will provide you download link.

  2)

  You can download Adobe Creative Cloud applications:

  https://creative.Adobe.com/products/creative-cloud

  Reference: download, install, update or uninstall applications

  3)

  You can download it from Acrobat Pro XI of direct download link.

  During installation, select the optoin: installation using the serial number / subscription.

  Download Acrobat products | Standard, Pro | DC, XI, X