Using the driver of neslab instruments?

Similar Questions

• RN102 - please remove inactive volumes in order to use the drive - data loss

  ReadyNas 102, 1 x 1 TB of disk (in 2nd driving position), belonging to 10 days, using 6.2.5

  I copied perhaps 25 data DVD disk (1 volume, through about 4 servings). I have lost the network connection to the NAS server, could not get the sin to meet switch & finally upluged the power from the back, after a reboot that worked was & when reconnecting, I note ALL my data drive disappeared. No matter what I do with the power, I shouldn't be able to have this catastrophic failure.

  If I go to Volumes, it shows the volume, with a red dot in the upper left, with the data and free are two 0.

  also a ball - please remove inactive volumes in order to use the drive. Disk #2.

  If I go to actions it says: no volume or USB drives. It is recommended to create a volume before you set up other...

  If I had 2 drives (copies of each other) would I still lost all of these data. It seems that the reliability of disc is not my main concern, but the speaker.

  I've never had a pc lose all his data by car, make it look training crashed as the s/w me invites to use it. It looks like the o/s meta data, manage the contents of the disk are broken down.

  Is this code issues I may be courses?

  You have the USB key with the encryption key connected to the NAS Server? The key must be plugged to the volume mounted power.

  Looks like you will need to contact support.

• Using the drive 100% running 8.1 Win

  Help me please,

  What can I do on this 100% disk usage?
  It is going on all the time... I added the photo, so that you can see.

  Sometimes he says that the system is the problem, sometimes programs like utorrent or firefox,
  Other times it's simply nothing (!), but it's always 100% usage...

  [https://www.dropbox.com/s/m9ncihihvlnf1dw/Untitled2.png?dl=0]
  [https://www.dropbox.com/s/lafx62833vnwps5/Untitled.png?dl=0]

  I have a brand new computer:

  Processor: Intel Core i5 - 4200 M CPU @ 2.50 GHz
  1 video card: NVIDIA GeForce 710 M (Total dedicated memory - 1.0 GB, memory - 2.9 GB)
  2 video card: Intel(r) HD Graphics 4600 (Total dedicated memory - 1.0 GB, memory - 2.9 GB)
  Memory: 4.0 GB
  Operating system: Microsoft Windows 8.1, 64-bit
  Size: GB 687,8

  You can stop the background process which is responsible for the use of the HARD drive.
  Of course the processes running in the background, access data (reading / writing), and therefore the use of the HARD disk increases dramatically.

  For example, you installed a client utorrent... This tool sharing the beween of data using the internet connection and so the HARD drive is busy

• How can I extract and use the driver "exe" to communicate and to load an Excel "cvs" in my Amateur Radio transceiver?

  I use a Mac Mini OS 10.11.3 (El Capitan) processor 2.5 GHz intel Core i5.  With 16 GB of ram at 1600 MHz kDDR3.  I down loaded the program I need and you used my (Mac) excellent program to load the cvs program sheet.  However, the driver is contained in a 'exe' format and I can't or can extract my Mac to use this program.  This driver is required to enable communication between my Mac and radio transceiver.   The only option I see is to acquire a computer laptop windows to allow the use of this application unless there is a program bootable can I mix on an external hard drive and then use Bootcamp?  Help please.

  Try using CrossOver Mac, or install Windows in Boot Camp or an emulator such as VirtualBox or Parallels Desktop.

  (139948)

• Can I use the drive HARD internal extra for my Satellite A200-1 to 9?

  Hello, new to these forums,

  I recently bought the A200-1 to 9, and I'm very happy with it. I was interested by the addition of an extra internal HDD to the exisitng 120 GB one. I obviously did not have enough research I bought a Toshiba MK2035GSS: 2.5 "HARD 200 GB drive thinking it would be slot directly into the spare slot and it doesn't.

  So, really, I'm looking for some advice if I can add an extra internal hard drive and if so what model and how. After taking the back cover it looks like the aura of the place for another drive, even though I'm not sure if correct connections are there, or maybe if the space is used for something else.

  Any help much appreciated.

  Thank you
  Martin

  Hello Martin

  As far as I know that some A200 models come with hard drives 2. because of this Toshiba laptop brand standard chassis. All A200 models use this standard chassis. Your A200 comes with a single drive HARD and because of this place for the second disc is empty. This does not mean that you can use the second HARD drive.

  I have the same laptop as you and in my case there is no any prepared for second HARD drive HARD drive connector.

• Installation of the minimum runtime for the program using the driver USB of NI-VISA personal

  I have a LabVIEW 2009 application that uses a driver for a USB device, created using the wizard of the Driver NI-VISA.  What my minimum installation of runtime needed to understand when I move it on a non-development machine?

  On my dev machine, I went to MAX and given my new camera USB one alias of VISA.  I think I'll meet trouble if my deployment includes no MAX on TIME machine.

  Right now, I guess the minimum is LabVIEW 2009 DURATION, NOR-DAQmx Configuration (including MAX) execution, duration of NI-VISA.

  If not, is there a method that avoids having to configure an alias altogether?  It would be nice to not not need NOR-DAQmx, I use not any material that my USB device with driver custom.

  Thank you!

  Not sure why you consider same installation DAQmx. You can install just MAX, the VISA duration and your harware MAX configuration. The installerallows of LabVIEW allows you to export the configuration, and then you select the option to import on the deployment computer. You will also need to include the installation of the inf file you created with the wizard.

• Using the drive almost always at 100% at the start and sometimes at other times

  Recently, my laptop seemed particularly overwrought, even when executing threads. Whenever I start it (and also sometimes at random so that I use for light work), it is much slower than it has been in the past, and when I check the tast Manager, it says that the disc is in 90 to 100% almost every time. So I watch programs using the floppy and almost all of them use it with a rate of 0 MB/s, and all other use at a fairly slow pace. I know it's normal for notebook computers to slow down over time (mine is a little over a year old), but I wonder if it is an expected behavior. I find it odd that the drive is the treatment so furiously, but it seems to me that no program is really use it. I enclose below, pictures of my complete task manager a few minutes after starting.

  My processor is an Intel i7-4700MQ CPU @ 2.40 GHz and I have 12 GB of RAM.

  @MirandaSnow ,

  Hello and thanks for the display on the HP support forums.  What you have going here is not a hardware problem.  It is a common problem with windows 8.1 and an update.

  Here are some links that I could find that should help you with this problem.

  Use of the disk Windows 8.1 100%

  Windows 8 guard slows to grip and 100% use of the disk.

  How to fix: problem of its use for the drive 100% Windows 8

  Let me know how things are going with this.

  Thanks again for posting and have a great day.

• DVD RW drive has an error code of registry 19. I can't use the drive and it is not visible as a drive.

  My lite - on dvdrw lh-20a1l ata device does not work.  Device Manager appears with the following text:

  Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available.

  I tried looking for solutions, uninstall driver and reboot, reinstall the software provided with the machine, running regecure software to clean the registry and nothing has solved the problem so far - you have ideas?

  19 code means there is a driver conflict such as two devices attempt to use the same
  resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then check the cables
  both ends. Remove and replace, do not just tight. For laptops, you can often clean the
  power and data of the contacts with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer
  and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD &)
  Burn DVDs and CDs and read DVDs). So it is not unusual for 1 or 2 operational parts while
  others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Computer will not use the drive when you restart.

  I have a Pavilion dv 9000 and had problems more and more lately (win explorer fails, application launcher fail, blue screens, crashes etc.).

  I decided to use the recovery disk that was created at first boot. According to all the manuals that I found (on - and offline), it is just to put the recovery disk in the DVD-ROM and restart.

  The problem is that nothing happens. The computer does not use the disk when it reboots.

  Anyone experienced the same problem with the recovery disk?

  I'm not having any other problems with the ROM, works perfektly once Windows is running.

  Thank you

  You may need to change the BIOS to do first the CD drive in the boot sequence to boot from the CD.  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  Put the CD in the drive and reboot.  When you are prompted, press any key to boot from the CD.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Why using the driver NOR-DAQmx ANSI C functions in a thread causes a deadlock?

  Firstly, apologies if this is bad advice, but it seemed the closest fit.

  I use MSVC 2008 Express with the library in ANSI C NI DAQmx for some analog output with a box USB-6009. I create a thread to handle the signal generation is based on fixed time. My main thread running the user interface. I found that I get intermittent blockages in release, so that libraries mode NOR are responsible (in the second thread) and I use MSVCRT features (on the main thread). My test code is attached as "deadlock2.cpp".

  I used WinDbg to try to find the cause of the deadlock. Traces of the battery of my two sons are attached as t1_stack.txt and t2_stack.txt.

  It seems that the MSVCRT localtime() function uses a lock when it is called for the first time and then went to lock the Windows DLL loader lock. At the same time libraries NOR (or less libraries mxs) are responsible for locking the charger DLL is being held. The mxsutils library uses getcwd() which seems to try to block something the MSVCRT and therefore my two sons are now deadlocked.

  I can probably work around this by calling the localtime() and the NOR-DAQmx functions before I spawn my second thread so that the DLLs are already loaded in the process. However, I have no guarantee of this to continue working if something changes in the future, and if there are any locks going on finally having the DllMain() calls for a thread hanging may still cause a deadlock. If my results are correct, is it likely that NEITHER would fix the dll for not trying to make something complex in their DllMain()?

  According to NI Measurement and Automation Explorer, I'm under DAQmx libraries v9.3.5f2. I download the latest version now to try, but it will take time.

  Hi dmcminn,

  Thank you for the comprehensive and detailed bug report. I was able to reproduce the problem with NOR-DAQmx 9.6 using the code you posted. I reported it to the R & D team suitable as CAR #366538.

  I agree with your analysis of the problem. Getcwd() so the first call to __tzset() acquired _ENV_LOCK, which Microsoft has documented as the "lock for environment variables. __tzset() also called GetTimeZoneInformation(), which can load additional libraries, that you have demonstrated.

  Here are a couple more possible solutions, but they are not great:

  • Link to the static version of the CRT (/ MT instead of /MD). This would bind a separate copy of the lock of the CRT table in your program, and DAQmx would continue to use the lock to MSVCR90.dll table. They use more of the same _ENV_LOCK.
  • Build using a different version of Microsoft Visual C++ (for example 2005 or 2010). MSVCR80.dll MSVCR90.dll and MSVCR100.dll own separate copies of the lock of the CRT table.

  Whatever it is, it does not eliminate the fact that mxsutils called the CRT while now the loader lock, and this function CRT acquires another lock.

  Furthermore, the forum Multifunction DAQ is a better place to ask questions DAQmx.

  Brad

• Drive does not recognize CD or CD-ROM when loading. Can use the drive using Roxio.

  I insert a CD, nothing happens.  During the loading of software, I manually use the Explorer to load.

  The cause maybe roxio. See if it suits it

• 100% Windows 8 using the drive and Windows Update problem

  I'm going to completely horrible with windows 8.  I use the computer for two reasons

  1.) to run a machine virtual linux which performs calculations for my work

  (2.) to run a very small application that connects to another computer and updates a display based on what is sent to it.  This application also shuts down the computer when the network computer told him to.

  The computer is not connected to the internet, so I chose not to do the windows updates (in Control Panel, never check, do not update, etc...), now that I have a set of drivers that work well.  Took me to update to the latest version of windows 8 (not 8.1), so that the service representative would talk to me, and the problem is more serious.

  I also disabled windows update service.

  Also, after startup, svchost.exe takes 100% of the use of the disc for anywhere from 1 minute to 3 hours.  It is usually about 5 minutes, but takes more time after an update.  I reinstalled windows many times, and the problem persists.  When no other applications running, 10 minutes after the start, opening of windows Explorer takes about a minute.  This computer has a disk decently fast (I tried to replace), a processor quad core and 16 GB of RAM.  When running normally, it is extremely fast.

  My problem is that when I'm at work, a team of 20 or so programmers and engineers may have to wait up to 3 hours for the use of the disc down before you start to work because Windows 8 is unable to work properly.  How can I get rid of this?

  I am considering really just to start the linux and rewrite of the application image bit will run in windows, but I don't want the headache of Active Directory on linux.

  http://social.technet.Microsoft.com/search/en-us?query=Windows%208%20%26%20linux%20virtual%20machine&AC=5

  Try this link for windows 8 & virtual machine. Also, if it's a pc intel based,.

  go to intel.com/support/software/drivers,locate the update utility intel that

  will scan the pc for auto drivers/software.

  Even with the new CD of the OS, you must always configure the hardware on the pc for

  the operating system, most of the cds do not understand that. No windows OS takes also, that

  long to make it ready for the tasks, no more than 10 minutes without

  Progress, stop the execution of its tasks, its in an "open loop"...

• Using the drive with MSSQL and Oracle partitioning

  Hi all
  
  Although this isn't a likely configuration I would recommend/meeting, this issue has been driving me crazy because I can't find the answer and I don't know how to test it on my own (lack of material and knowledge).
  
  I met a paper on SQL Server 2012 and 2008R2, which States:
  

  When SQL Server performs sorting data IO operations, it first sorts data by partition. SQL Server accesses one disc at a time, and this can reduce performance. To improve the performance of data sorting, divide your partitions on disks data files by putting in place a RAID. In this way, although always SQL Server sorts data by partition, it can access all drives of each partition at the same time.

  http://msdn.microsoft.com/en-us/library/ms190787.aspx
  >
  
  I'm curious whether Oracle has the same "limitation." I see in the 10.2 docs they say:
  

  Although you are not required to keep each table or index partition (or subpartition) in a space separated, it is to your advantage to do so. Partitions in separate tablespaces storage allows you to:

  * reduce the risk of data corruption on several partitions
  
  * Save and retrieve each partition independently
  
  Controls the mapping of the partitions of hard disks (important for I/O load balancing)
  
  * Improve the manageability, availability and performance
  
  http://docs.Oracle.com/CD/B19306_01/server.102/b14231/partiti.htm
  >
  
  But it's not precisely say it can access more than one disc at a time. I can't tell if this applies to Oracle or not. Sorry for the reference to an earlier version, but I searched this statement in 11.2 documentation but could not find.
  
  Anyone can shed some light on this? It is eating at me :)
  
  Thank you
  Rich

  My PC at home came with two hard drives of 1 t. Default HP would deliver them together towards the top in a setting stripped for performance (even if I had the drive put in place like a mirror). For Windows, there is only a C"" drive. Yet, most of the documentation you have read still refer to the disk drives as your disc consists of physical disks to which you have access to. In a world record is often a block box, that is another question and discussion.

  HTH - Mark D Powell.

• Using the drive to 100% with Windows 8

  I just bought a new sony vaio with windows 8 and my task manager accused of being a 100% for the disk drive.

  The sum of all processes are less than 10%, but the use of the disc tha remains high 100%.

  My sony vaio is really slow because of this problem.

  I would like to know the process to solve this problem.

  Thank you

  Hello Kevin,

  Welcome to the community of Sony.

  I suggest you to check if there are any BIOS Update Utility is available on the support page on the problem of your computer's performance.

  You can check the update by putting exactly the model of your computer, here: http://esupport.sony.com/US/p/select-system.pl?DIRECTOR=DRIVER

  You can come back with exactly the model of your computer with the issue in detail. Look for the model # here: http://esupport.sony.com/US/p/support-info.pl?info_id=264

  Kind regards

  Miguel

  Note: If my post answered your question, please mark it as an "accepted Solution".

• everything works out of the training. How to use the drive as primary drive c to reset?

  This model has been the gift to my son of his uncle. He had cleaned it and reset. Big problem is that everything works on drive D instead of c drive. How to fix this?

  Hello

  You can download the screenshot of disk management and Windows Explorer screen to get a better understanding of the issue, you face to see the link mentioned on how to do so below.

  Use SkyDrive download collected files and post screen shot/image