How to install VMware-VMvisor-Installer - 5.5.0 - 1331820.x86_64.iso

Similar Questions

• The Vcops error (VMware-vcops - 5.8.0.0 - 1448123 - vapp.ova) on VMware ESXi (VMware-VMvisor-Installer - 5.5.0 - 1331820.x86_64.iso)

  Hi all

  I am a novice in this area and to learn.

  I installed VMware ESXi 5.5 in one of my machine and it works through VMware player. Am also able to connect to VMware ESXi 5.5 via Vsphere Client 5.5 on my machine. Through my research on the internet I found that vCenter Server is required only when we have the large number of ESXi to manage (correct me if I'm wrong). In my case, I have only one. Therefore, I have not installed vCenter Server.

  Now, I want to deploy vCops with VMware ESXi 5.5 5.8. But while deploying OVF template(VMware-vcops-5.8.0.0-1448123-vapp.ova), I get the following error.

  

  My understanding above is correct or am I missing something obvious?

  Hi RizQad,

  According to the guidelines of the screenshot, you connect directly to the host ESXi 192.168.0.49 and the error is reported through the OVF vCOPs. It's expected, because the ESXi host do not understand the purpose of vAPP, as explained in my initial comment.

  You need to connect to your IP vCVA i.e. 192.168.0.51 using the vSphere client and then import the OVF vCOPs.

  Let me know if you still experience this issue.

  Arun-

  https://Twitter.com/arunpande

  http://highoncloud.blogspot.in/

  Virtualization VMware on NetApp

• How to install VMWare ESXi on HP integrity rx Server 6600

  I have a VMware-VMvisor-Installer - 5.1.0.update01 - 1065491.x86_64.iso and I have installed successfully on IBM system x 3650 M3.

  But I can not install the HP integrity rx Server 6600 (hp integrity rx 6600 64-bit server, processor intel Itanium 2 1.6 Ghz core).

  Please teach me how to install VMWare ESXi on HP integrity rx Server 6600

  Thank you.

  Hello

  You cannot use ESX / ESXi on Itanium.

  Take a look at these...

  https://communities.VMware.com/message/1491338

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00773159-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3257036&ac.admitted=1379566669455.876444892.199480143

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• How to install the windows installer?

  How to install the windows installer? I can't install Java because it tells me that I have to install windows install.

  You can download and install Windows Installer from HERE. However, I doubt that this is your problem. Give it a go well and we'll go from there.

• After the installation of the VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A01 ssh service fails

  Hello

  yesterday, I upgraded a few of my guests ESXi to VMware-VMvisor-Installer-6.0.0.update02-3620759.x86_64-Dell_Customized-A01.iso

  But after the restart, everything works well except the SSH daemon.

  I can not connect via SSH to host more. In the settings, everything seems well, ssh daemon is running, and firewall ports are open.

  Something wrong with this version?

  OK, fixed. It was a problem with an older version of PuTTY.

  In the log file, you will find something like:

  auth.log:2016 - 05-07 T 12: 58:09Z sshd [164893]: error: Hm, kex protocol error: type 30 seq 1

  If the old version of PuTTY had the bad protocol settings. You can change it in Putty SSH parameters - KEX to change the order of the algorithm and put "Diffie-Hellman group Exchange" at the bottom.

  Or better yet, download a newer version of PuTTY. It is fixed in newer versions

• How to install VMWare Tools for Ubuntu 9.10 (VMWare Fusion 3.0.0)

  I am new to Ubuntu and I can't understand how to install VMWare Tools - what I need to do this from a command line?  Any guidance would be appreciated.

  To manually install, choose computer virtual > install VMware Tools, a file must window popup with VMwareTools - 8.2.3 - 204229.tar.gz you can right click to expand only in / tmp.  Then in Applications > Accessories > Terminal, cd to/tmp/vmware-tools-distrib and run sudo./vmware-install.pl

• How to install vmware esxi 5.5 on ucs220 M3

  Hi Member,.

  I have this in my lab

  UCS 220 M3 with hardward raid:

  CISCO UCS RAID SAS 2008 M - 8i: PID UCSC-RAID-MZ-C220

  Mezzanine

  4 internal

  NO.

  0, 1, 1E, 10

  4 discs: 1 mini SAS (UCSC-3)

  I'm trying to install VMWARE ESXi5.5 on it, while installation work perfectly fine, but the server could not start from where vmware is installed.

  Any help will be appreciated on how to go about the installation and the creation of a part of the bios initialization.

  Thank you

  When you press F6, you see the RAID controller that is listed as a boot option?

  Can we go to the MMIC BIOS configuration, Advanced tab and check the Option ROM (OPROM) this controller is activated?

  So useful, please note

  -Kenny

• How to install VMware Tools in Ubuntu guest with no Internet connectivity?

  I need to install VMware Tools in a Guest Ubuntu (10.04) running in VMware Player.

  The machine on which it is running has no internet access; It is part of an isolated network.

  I know there are a LOT of instructions on how to do it, and it seems that they all begin with "mount your ISO file...". ' or "click"Install VMware Tools..."."

  Of course, I have not and cannot find a file ISO of VMware tools for Ubuntu.  I admit that I can be looked in the wrong place, but I watched several times and have spent many hours on it.   I tried Open VM Tools as well and followed the instructions included, but orders did not produce the responses described.

  When I click on "Install VMware Tools" the machine just made several attempts to connect to a server that will never happen.

  Although it does not prove that I know what I'm doing, I installed VMware Tools on several hosts of Windows XP.  For some reason, I was able to find many versions of VMware Tools for Windows ISO.  The installation worked everytime with very little hair loss.

  Thanks for any help on this eternal question.

  You will need to download the ISO images for the VMware Tools installation media at least once, on a computer with internet access.  Player menu--> File--> Preferences of the player.  Click on the button download now all components.  Once complete, there will be 6 ISO files in the folder of the player.  You can copy them to the same location on the PC that you are currently underway.  Then, you can follow the instructions to install VMware Tools in a Linux Guest, located in the help file.

• How to install Webcam without installation CD?

  Hi, I LOVE to video chat and I have my webcam plugged into my computer. But I can't find the disk for the driver or whatever it is called. Well, in any case, my question is, how to install your camera so that you can video chat and all this WITHOUT a driver installation? Thank you! Chloe<>

  Hi Chloe,.
  You will need to download the driver for the webcam Web site editor. You need to the driver so that the camera work, and if you don't have the original disc, then you just need to download it from the site of the camera support.

• How to install scanner without installation disc?

  How to install Canon CanoScan N 656U for Win XP without the installation CD?

  Download the driver and (possibly) the Canon CanoScan Toolbox--> http://www.usa.canon.com/cusa/support/consumer/scanners/canoscan_series/canoscan_n656u#ServiceAndSupport

• How to install VMware tools correctly on Linux Mint 15 cinnamon on Fusion 5.0.3

  Hello

  First of all, I understand that Linux Mint is not supported (side: anyone know if this will change?), so I appreciate any help.  My main problem is with the folders shared

  Dead ends

  So far, I've run into some dead ends:

  1. I watched install VMware Tools in Linux Mint 15 cinnamon (Olivia) - YouTube - but this facility has been the "'VMware Workstation 9.0.2 ' and the author admits"I don't know if it works or not with the fusion." "

  2 I downloaded a a copy of the latest vmwaretools for linux of deposit of CDS - /www/stage/session-32/cds/vmw-desktop/fusion/5.0.3/1040386/packages only to find it was exactly the same as the package vmwaretools this merger gives me at least VMwareTools - 9.2.2 - 893383
  

  Some success

  I had some mild success by running the following commands before installing - it seems to stop error messages:

  apt-get update
  sudo apt-get install build-essential
  sudo apt-get install linux-headers-`uname -r`
  sudo apt-get install xinetd
  

  But my MAJOR PROBLEM IS...

  When I try to activate the shared folders while the guest is running, I see a message:

  

  Or if I turn on shared folders when the guest does NOT work, I don't get an error message - but I don't see either record hgfs under/MNT

  Other research

  I read can't see the shared folders in Linux guest (Windows host) and Re: sharing files on drive betw host and the guest does not work on Ubuntu 13.04 and even tried to run the script vmtoolspatch of WoodyZ of this post - with the following result:

  user@GNS3WB62 /tmp/vmware-tools-distrib $ ./vmtoolspatch 
   
   
  patching file driver.c
  Reversed (or previously applied) patch detected!  Assume -R? [n] n
  Apply anyway? [n] y
  Hunk #1 FAILED at 152.
  Hunk #2 FAILED at 1978.
  Hunk #3 succeeded at 1962 (offset -71 lines).
  2 out of 3 hunks FAILED -- saving rejects to file driver.c.rej
  patching file inode.c
  Reversed (or previously applied) patch detected!  Assume -R? [n] n
  Apply anyway? [n] y
  Hunk #1 succeeded at 62 with fuzz 2 (offset 12 lines).
   
   
  To install VMware Tools type the following
  commands, pressing Enter after each:
   
   
  cd /tmp/vmware-tools-distrib
  sudo ./vmware-install.pl
  

  But after the installation of the VMware shared folders tools has not always worked.

  My plea

  Someone has successfully shared folder with Linux Mint 15 cinnamon (32 bit - no codecs) invited 5.0.3 fusion and if so could you share the steps that you used?

  My system Details

  I tried this using VMware Fusion 5.0.3 in both a

  MacMini running Lion Server (OS X 10.7.5) 2 GHz Intel Core i7 16 GB of DDR3 memory and a

  MacBook Pro running 2.8 GHz Intel Core Duo 8 GB DDR3 (OS X 10.8.4) Mountain Lion

  I have only this tried using Linux Mint 15 cinnamon (32 bit - no codecs)

  Well, starting with the basic installation created by using the linuxmint-15-cinnamon-dvd-nocodecs-32bit.iso image under VMware Fusion 5.0.3 I did the following.

  sudo apt - get install linux-headers-$(uname-r)

  sudo ln-s/usr/src/linux-headers-$ (uname-r)/include/generated/uapi/linux/version.h /usr/src/linux-headers-$(uname-r)/include/linux/version.h

  Excerpt from vmtoolspatch.zip in my Home Directory.

  Excerpt from the VMware Tools VMwareTools - 9.2.2 - 893683.tar.gz to: / tmp

  Open a Terminal, by default, the base directory, then:

  wkz@linuxmint15x86nc ~ $. / vmtoolspatch

  patch the file driver.c

  patching file inode.c

  To install VMware Tools, type the following command

  commands, pressing ENTER after each:

  CD/tmp/vmware-tools-distrib

  sudo./VMware-install.pl

  wkz@linuxmint15x86nc ~ $ cd/tmp/vmware-tools-distrib

  wkz@linuxmint15x86nc/tmp/vmware-tools-distrib $ sudo./vmware-install.pl

  Once VMware Tools have been installed, I rebooted and had access to the VMware shared folders.

  So it works with the basic install however I do not run apt - get update then apt - get upgrade or use one kernel other then the default.  So once the changes then the scrip may not work and I don't have time to test each variable and am just trying to give some automated solution just to make it easier to patch based on what is said in the Notes section in the script.  Really don't want to maintain it and others can build on this and or do something similar.

  Make sure that the stamp of Date/time on the file vmtoolspatch is Jul 15 00:04:00 2013 as who has worked with this test.

• How can install vmware tools on Linux

  Please provide details for the installation of the VMware tools on Linux (RHEL4.6)

  Please take a look at this VMware KB: http://kb.vmware.com/kb/340

  Basically you can right click on the VM and start the VMware Tools installation or extract the number of TURNS of linux.iso file and simply install the package as you would with the standard speed of RHEL. You can find more details and instructions in the above KB

  =========================================================================

  William Lam

  VMware vExpert 2009

  Scripts for VMware ESX/ESXi and resources at: http://engineering.ucsb.edu/~duonglt/vmware/

  Twitter: @lamw

  repository scripts vGhetto

  Introduction to the vMA (tips/tricks)

  Getting started with vSphere SDK for Perl

  VMware Code Central - Scripts/code samples for developers and administrators

  150 VMware developer

  If you find this information useful, please give points to "correct" or "useful".

• How to install VMware vCenter Converter integrated (vCenter Server plugin).

  Hi all

  I would use the vCenter Converter to do some P2V, but I am unable to find it.

  When I go into the plugin vCenter nor its present installed the plugin or available.

  So please help me how can I install it.

  Kind regards

  Khurram Shahzad

  Hello

  have you installed during the installation of vcenter converter?

  If not make a vcenter PNO changeinstalaltion and install the converter once more.

  After that, you will have the available plugin.

  MCP, VCP

• How to install VMware Tools on Ubuntu 9.10 guest?

  Hello!

  I have VMware 6.5.3 for Windows. I installed Ubuntu 9.10 32-bit and I don't know how to install tools guest inside Linux. Guest Windows, it's a blink of an eye, but here are more complicated. Can someone help me with step by step tutorial how to install this on Ubuntu 9.10? I'm newbie here.

  When I click the button to install the tools I just get open File Browser with the file .txt, RPM and gz. Any file I click on I can't run Setup. Please help!

  It's a little more complicated because each OS has a core (all about that), and Linux, you can have different versions of kernel.  Thus, the shell script (files ending in .sh) compiles all the binaries against what you have.  I believe that the version of Ubuntu has headers of the kernel with it, so that you would do is:

  1. go to places, downloads (the desktop menu bar)

  2. find your gz file, right click and select Extract here (I normally do it from the command-line using tar - zxvf, but this should work too)

  3. open this directory, right-click on the vmware-install file and select "Run as a program" (in this way you can kick it off)

  4. open a terminal (command prompt) and cd to that directory (should be cd downloads/vmware-tools-distrib)

  5. Type sudo./vmware-install.sh

  6. Enter your password when prompted, then go with the default values, and you should be set.  Make sure to run the configuration script (it will ask you if you want to, and you do, but if you mess up that part you can run it later so no biggie) and then sign out and sign back in.  You should not need to reboot and everything should work immediately.

  At boot, you might see no ERROR.  It's probably the HGFS mount is not working due to no shared directories.  Don't worry about this for now.  If it bugs you, you can comment on him in/etc/fstab (but don't mess with it until you're a bit better).  Snapshots are your friend, so use it as your rescue as trash several times your VM Linux, because it will happen.

  Dell SXPS 1340, P9600, 8 GB of RAM

  MCSA/MCSE 2003, MCTS, RHCT

• How to install vmware tools in a virtual machine running in the drive on an Ubuntu host?

  I have a host of Ubuntu (Ubuntu LTS 14.04.2)

  I have a virtual of Fedora (4.0.4 - 301.fc22.x86_64) and I would like to install vmware tools in the virtual machine.

  When I select the player VirtualMachine-> reinstall VMware Tools...

  I get a prompt in a box on the screen.  It is said:

  The following software are available for download:

  VMware Tools for Linux version 9.9.3

  What do you do?

  X Cancel |  Download and install

  Of course I choose to download and install (kind of silly question - why I want to cancel?)

  So instead of download the tools I want to install, it says:

  Your permission is required to install an update to VMware.

  Please enter the root password to move forward.

  Password: __________

  not serious.  Now, he's looking for what root password?  The virtual machine or the host?

  I have try the virtual machine and it works-not "incorrect password... try again."

  ... well Ubuntu is not a root user.  So, I try the password for the user with root privileges

  "incorrect password... try again."

  Then, he does not.

  Not very satisfying.

  The instructions that I found in my research right you will say to take the step to obtain the Tools package then (well, nothing of the rest of it is important if the tools are not available to me).

  Suggestions?  Advice?

  The required password is for the host.

  A workaround of functions is "sudo su -" of ubuntu host, then start vmplayer from the root prompt.  You must browse the virtual machine since the user doesn't have a history of openness yet... but then there is no prompt asking for a password when you try to download the tools.