How to install VMware vCenter Converter integrated (vCenter Server plugin).

Similar Questions

• Cannot install VMware vCenter Server on a virtual machine

  Hello world

  I'm new to the forum. I try to install the vcenter server in a virtual machine.

  Configuration of the VM: 10G VMDK, used 7G... 2G memory... guest operating system is win XP Pro.

  When I run the Setup it says:

  This installation package could not be opened!

  I have attached a JPG of the error. Can someone please!

  Kind regards.

  64 bit is not supported as a host to vCenter operating system, see the compatibility guide posted above.  I would try to mount the ISO using the client machine instead of starting from the ESX host, it could be that your DVD image is not good.

• Difference between Standalone Converter and converter integrated with VMware vCenter Server?

  What is the difference between Standalone Converter and converter integrated with VMware vCenter Server, except that it comes integrated with Vcenter and another does not?
  Please confirm is there the technical differences between them?

  Also take a look at the Release Notes for vCenter Server 4.1.

  of http://www.vmware.com/support/vsphere4/doc/vsp_esx41_vc41_rel_notes.html

  VMware vCenter Converter plugin. VMware vSphere 4.1 and later versions of the update and patch are the latest editions of the VMware vCenter Converter plugin for vSphere Client. VMware will continue to update and support the free Converter Standalone product, which allows conversions from sources such as physical machines, machine formats virtual VMware and Microsoft and some third-party disk image formats.

  André

• How does VMware vCenter Server Heartbeat communicate?

  How does VMware vCenter Server Heartbeat communicate?

  VMware vCenter Server Heartbeat supports configurations of single NIC or multi.

  Public IP address: this IP address is used by a client to connect to an Active Server, and move between the secondary and primary servers in the case of a failover or a passage.

  IP address of the channel: this is for communication between active and passive servers. This is used for the transfer of control and an asset to the passive server data and monitoring the State of an Active Server.

  In a LARGE network, static routes are used on switches to maintain ongoing communication.

  Management IP address: this address is used to access servers in a passive role. In a multi NETWORK card configuration, a NIC will have IP addresses public and management, and an another aura NIC IP address of channel. In a single NETWORK adapter configuration, all IP addresses are on the same network adapter.

• How to install VMWare ESXi on HP integrity rx Server 6600

  I have a VMware-VMvisor-Installer - 5.1.0.update01 - 1065491.x86_64.iso and I have installed successfully on IBM system x 3650 M3.

  But I can not install the HP integrity rx Server 6600 (hp integrity rx 6600 64-bit server, processor intel Itanium 2 1.6 Ghz core).

  Please teach me how to install VMWare ESXi on HP integrity rx Server 6600

  Thank you.

  Hello

  You cannot use ESX / ESXi on Itanium.

  Take a look at these...

  https://communities.VMware.com/message/1491338

  http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/kb/docDisplay/?javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken&javax.portlet.prp_ba847bafb2a2d782fcbb0710b053ce01=wsrp-navigationalState%3DdocId%253Demr_na-c00773159-6%257CdocLocale%253D%257CcalledBy%253D&javax.portlet.tpst=ba847bafb2a2d782fcbb0710b053ce01&sp4ts.oid=3257036&ac.admitted=1379566669455.876444892.199480143

  Kind regards

  Assane

  If you find this useful, mark the answer as correct/useful

• I did a stupid thing: I suspended "vmware vCenter Server Appliance" and now I can't connect to it more

  Hello

  First some info on our system. We have a group of three hypervisors and a few terabytes of storage on two devices of Synology. VCenter Server allows us to control everything. This vCenter is accessible via a dedicated ip address. Then I opened my 5.5 vSphere client on my workstation, check the name and credentials of the vCenter and hup I can admin everything.

  Now, what I did with my sleepy head? I suspended the so-called "unit of vmware vcenter server. And my vsphere client lost my connection with the server vCenter Server immediately.

  I can't ping this address ip-plus.

  I'm afraid that ssh is disabled.

  Installed on virtual machines seemed well-oiled, I can access it by using RDP. So no worries for employees using them.

  So I would like to be able to restart this device "vmware vcenter server" but I don't know how to do it.

  All useful ideas would be nice.

  And Yes, it's a really stupid mistake.

  Thank you

  Paul

  Point your client vSphere host your vCenter ON VM's.  You can then start the VM vCenter.

• VMWare vCenter Server Appliance / 2012R2 Windows domain

  Hi all
  I've recently updated my domaincontrollers to R2 2012 WIndows, and I installed vCenter on a vm through the ovf appliance. After you have configured the vCenter in the web gui, I can join the domain successfully and the virtual center appears in the field. After a restart of the virtualcenter, I'm not able to find the field in the client to vcenter under permissions. (version vCenter: VMware-vCenter-Server-Appliance-5.5.0.5101-1398493)

  Someone at - it a tip on how to fix this?

  You must login to webclient using [email protected] and navigate to the SSO configuration. Select your ad that you added and make this default domain. This makes the announcement should appear in the menu drop-down.

• vCenter install fails when you try to install the vcenter Server to the node of the PSC in HA mode

  Hi all

  We have two controllers on duty platform build in HA mode. We are trying to install the vCenter server and we get the error message below.

  VCSCAValidateRemoteSSO: Unable to retrieve the remote SSO version: 12029

  2016-03-30 17:07:16.656 + 11:00 | vcsInstUtil-2656758 | I: PitCA_MessageBox: Displays the message: "Setup VMware vCenter Server could not verify that the distance vCenter Single Sign-On Server is version 6.0.0 or later. Check if the Server Single Sign-On remote vCenter is accessible and is version 6.0.0 or later. »

  Has anyone in the community runs vcenter server 6 HA with PSC inspectors sitting behind the f5 load balancer? Please share your thoughts if you have seen a similar problem.

  Thank you.

  Hi all

  We are able to go beyond the question of the installation. We did the capture of packets on both ends and discover that the reset was issued the installer by the licensing vCenter service running on the PSC.

  We have also created firewall rules more 18 altogether since the server vcenter for our f5 load balancing program, then 6 VIP of the F5 on the two controllers on duty Platform.

  I hope this helps other people who sought to install PSC in HA mode.

• Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Do need me a separate license for VMware vCenter Server Heartbeat for a remote SQL Server database?

  Only a single vCenter Server Heartbeat license is necessary to protect the components of the vCenter Server installed remotely, including SQL Server. A single license is also used for several UNIQUE for vCenter Server services protected authentication servers. A license is required per instance of vCenter Server.

• ESXi installation before vCenter Server?  How can I get vCenter Server on a virtual machine on ESXi servers?

  My plan for a new vSphere Essentials Plus 5.5 U2a installation is to have the vCenter Server on a virtual machine on the servers of the host on which is installed ESXi.  However, all the installation instructions I found indicate the user to first install the vCenter Server.  How can I get vCenter Server on a virtual machine on ESXi servers?

  Thank you for your help.

  Hi munkyman welcome to communities.

  After you have installed your first ESXi host, open a browser and go to https://your-ESXi-ip-or-FQDN

  You can download the vSphere Client here. It is a windows application that you can install on your desktop. It is often referred to as the "c# Client vSphere" in communities and blog posts, because it is a new implemented in the vCenter Server Web client.

  But for the beginning, install the vSphere Windows Client. You can then launch it and connect directly to your ESXi host. Here you can create your first virtual machine, which can be the VM vCenter (installation of Windows or device, that is you).

  You can use the web client or connect to the Server with the client c# vSphere vCenter VCenter runs.

  Tim

• How many clusters manage vCenter Server?

  How many clusters manage vCenter Server?

  I have 8 HOST ESXi 5.1 on a cluster.

  and I want to remove 2 cluster HOST to add the VDP Advanced key and form a new group.

  can this change?

  I can't found the maximum number of clusters a vCenter can handle, only the maximum number of hosts per cluster, which is 32... but altogether, you can have more than one cluster without problem.

  Do a little math, since vCenter supports 1000 guests and each group can have 32 guests, maybe you can have at least 32 clusters... but not 100% on it.

  http://www.VMware.com/PDF/vsphere5/R51/vSphere-51-configuration-maximums.PDF

• Activate the VCA Mode of VMware vCenter Server Appliance

  Hello

  I'm pretty new on vSphere.  I have two hosts running esxi 5.1 what one of these hosts running the "VMware vCenter Server Appliance' with vSphere version 5.5.  I currently have a single cluster containing all the VMS as well hosts and the SAN.

  I try to activate the EVC mode, but when I try it tells me that the host is not allowed because there are powered on virtual machines.  I can turn off all the virtual machines except the vCenter device and I still get the problem on the host that has the device on it.  If I turn off the unit, I can't use vSphere to activate CVS.

  How can I activate CVS when vSphere does not work?

  Thank you

  Jeff

  Hi Welcome to the communities,

  This one is a bit complicated

  You have:

  1. turn off all VMs on Host1 (while vCenter device is on Host2)

  2 bring Host1 on Cluster, select CVS clustered.

  3. put all the virtual machines on Host2 (also vCenter device)

  4. connect on Host2 directly to vSphere Client Windows

  5. remove the vCenter inventory unit

  6. connect on Host1 directly to vSphere Client Windows

  7. the data store when the appliance and add it to the inventory of research. Power on

  8. connect the device with Web client or vSphere vCenter

  9. move the second host in the cluster

  And you're done

  Concerning

  Tim

• VMware vCenter Server, 4.1.0: resources for customizing Windows were not on the server.

  By using the vSphere Client, I created a customization of comments with 'Virtual Machine OS target' = "Windows".

  Then I tried to deploy a virtual machine from a Windows model. In the model "deploy" dialog box, in the "Guest" Customization screen, the 'customize using an existing customization specification' is grayed out and disabled and I see the following warning:
  Resources of Windows customization on the server have not been found.
  Why am I unable to use the comments Windows customization that I created?
  I am running: VMware vCenter Server, 4.1.0 345043 on Windows Server 2008 R2
  According to the VMware Knowledge Base system, preparation tools are integrated into the Windows Server 2008 R2 operating system and do not have to be downloaded
  Can someone help me solve this problem?
  Thank you

  Hello

  You can find the deploy.cab 2003 here: http://www.microsoft.com/download/en/details.aspx?id=23096

  XP here: http://www.microsoft.com/download/en/details.aspx?id=11282

  You must copy sysprep (extracts from the .cab) files on c:/programData/VMware/VMware VirtualCenter sysprep / (os)

  Concerning

  Stéphane Grimbuhler

  Senior consultant virtualization & storage (VCP / VCAP-DCA)

  VMware instructor (VCI)

• VCenter 2.5 U3 to VMware vCenter Server 4.1 on different hardware

  I have 2.5 U3 running on W2K3 32 - bit with SQL Express

  I need to 'upgrade' to VMware vCenter Server 4.1 moving to new hardware running W2K8 R2 (64 - bit, of course) also using SQL Express

  What would be the most logical way?

  Thank you

  SEB

  KB article http://kb.vmware.com/kb/5850444 describes how to migrate vCenter on a new host.

  André

• VMware vCenter Server 4

  Hey guys I'm new to VMware. Im trying to VMware vSphere 4.0 evaluation for 60 days, so I downloaded the modules and VMware vCenter Server 4

  on a DVD. When I tried to install the Vcenter on my desktop it doesn't let me. Can anyone please help me out and tell me what im doing wrong?

  now, if I download the trial version of VMware Workstation, I have to buy Windows XP operating system?

  You can download the VM WS 7.0 (30 days free).

  You can also download Windows Server 2008 (180 days free).

  It seems to me so you can try it for 30 days at least without having to buy anything.