How to insulate a hyperlink page number in a table of contents?

Similar Questions

• text too close to page number in the table of contents

  Most of the time I can take care of unattractive line breaks in the table of contents by putting in the nonbreaking spaces in a paragraph.

  However, sometimes I have a situation where a table of contents entry text is too close to the page number right. The text is so close to the page number as in some not case of presentation of points of the leader, or show only one or two points of leader.

  Writing and its adjustment page number on one line, then putting in the nonbreaking spaces won't solve the problem. I could put in a soft return (SHIFT-ENTER) in the table of contents entry to force a line break, but it is not effective because I have to put in the soft return manually every time the table of contents are updated.

  If someone has a tip on how to effectively manage this problem, I would like to know about it.

  Jay,

  Some time ago, someone posted a solution to make the line nice breaks in the index entries. It's setting values of the minimum and maximum word spacing in the paragraph Designer. The values validated it did not worked for me, so I played a little with it and use the following syntax:

  In the paragraph format for table of contents entry, set the maximum word spacing of 325% and oral minimum spacing to 275% and the optimal spacing to 100%. Note the fact that the optimum is NOT between the minimum and maximum values. I don't know the algorithm that Frame uses to decide where the line break, but I'm guessing he first decides to break the line to fill the max and min requires, breaks the line, but changes the spacing back 100%, which is what you want then, in other words, we don't want large spaces.

  The causes of values above a line break about an inch or two to the right margin. If you want to close, try 225 percent and 175 percent. I found that over these two issues of line breaks occur further from the right margin.

  This method does not have to enter the manual line breaks and gives a nice line break, even for those rows that could fit on a single line.

  Good luck

  Van

• How to upgrade only the page numbers from a table of contents in Indesign CS6?

  Hello!

  Help, please! I make a medical book with more then 1300 pages and about 40 different table of contents.

  I want to update only the page numbers on all the table of contents. But I don't see the option to update the table of contents.

  I've seen on other forums that it is a very old and familiar problem. Do you have Adobe already fixed it?

  Nothing has changed with the function table of contents. If you update a table of contents using the standard method of the table of contents, the complete table of contents are updated.

  You can get the page numbers only updates manually by creating your table of contents by using cross-references.

• Has anyone who has worked with doc us MIL - STD and generated with the success of the page numbers in the table of contents?

  I'm creating a template using FrameMaker 7.2.

  MIL - STD dictates works package (such as chapters) page numbers in the format: 0001-1, 2-0001, 0002-1 and 2-0002, etc.

  The problem I encounter draws in this format of the page number in the table of contents generated.

  I used a variable on the Master Page, and generate page numbers in each package to work properly.

  I know that in point 7.2 of the FM, you cannot include a variable in a table of contents generated.

  So I tried changing the variable on the Master Page to text using a paragraph tag (WPnumber), but have not gotten it either works.

  Tried all the other stuff I could think of, too.

  In my view, a part of the problem is that FM cannot have leading zeros when you set the page number or chapter (understandable 99.9% of the time).

  If anyone has suggestions or solutions, I am very interested to hear.

  Thank you.

  1Editor - and puzzled

  I already manually put the zeros.

  I just want to be clear that strikes the zeros directly on the master page does NOT have to include in the table of contents. You then type in the context of the reference to the table of contents also. In addition, you must have separate template and reference pages for chapters 10, 11, etc., in order to obtain the number of zeros correctly.

  With my method, the zeros are introduced as part of the chapternumber itself, in the chapter number of the TEXT. You still have to type but only once for each file.

• Pages is wrapping the row number in the table of contents

  So, I have a document with two paragraph styles I want to include in the table of contents.  A style with page numbers and the other without.  So I insert a table of contents (it's in its own section, because I want the table of contents to be their own style page numbers) and I get the table of contents, but instead of text that is labeled with the style of the paragraph to the left and right page numbers, I get the text containing the tag with the style of the paragraph to the left and then click the line below (no paragraph don't symbols even if it's on the next line) a blue arrow pointing to the right in the middle of the table of contents box, then on the next line (once more no paragraph symbol), to the left I get the page number.

  Anyone know what is happening or how to get the right page number on the same line as the text?

  Thank you

  John Engstrom

  Something that I did not mention what may be important - paragraph styles are two styles of personalized paragraph that I created for this document.

• Page numbering and the Table of contents

  I have a book containing 23 document files. Document files contain the page numbers in the footer.

  One of the document file is a generated table of contents (TOC). Unfortunately, the generated page

  the number in the table of contents do not match the numbering of the pages in the files. Here are the details:

  • The title page, in a file by itself, is not numbered
  • The frontmatter, distributed in five cases use lowercase Roman (i - xvi)
  • The body of the text in the remaining 17 files is digital (1-243)
  • The generated TOC uses cardinal numbers of the book as a whole. For example,.
    Chapter I is numbered correctly in the footer from page 1. However, he is listed in the table of contents
    as starting on page 19, because this is the file real 19th in the book. I put the document numbering
    This file from 1 properties and properties of Page numbering for the book as a whole to
    be "continue."
  • The style of the table of contents entries is correct. In other words, the frontmatter uses a tiny Roman and the
    chapters use Numeric

  I tried to regenerate the table of contents, but this did not help.

  Does anyone have suggestions on what is the way prescribed to do?

  OK, I continued to read and this is what I found:

  Set the numbering style in the document, and not in the book that we told you. Format > Document > numbering. Choose Arabic or digital. Repeat for the various chapters.

  

  Save and close the chapters. In the book file, click with the right button on each chapter and choose Configure XXX. This is where tell you the book to continue the page numbering or restart at the 1.

  

  Once this is done, update your address. From there, if there are issues, we rely on the logic of the Fm we use every day, and each of us can help you solve.

• How to get the clicked page number?

  I created a toolbutton.

  After I active this button I click on the page.

  Implement DoClickProc for toolbutton I get AVPageView and AVDevCoord.

  But how to know the page number, I clicked?

  Thank you.

  Hello

  Try to use the method AVPageViewGetPageNum (inPageView)

  Concerning

  Bartek

• How to keep the format setting when generating a table of contents

  Hello

  I have a superscript® in a title in a document that should be put in the Table of contents. When I generate the table of contents, I can't keep the format in the table of contents.

  I could cheat and manually change the, but there must be a way that remains with these properties whenever I have to regenerate the table of contents.

  No idea how?

  Kind regards.

  What version of FM?

  What the police?

  There are two separate issues here:

  1. If you are super as a character Format in the files of body, the format must be in character for the OCD catalogue, or the formatting is not applied.
  2. If you do this and get it display correctly in the table of contents, which will break the hyperlink linking it.

  The solution is usually to do great as characters of Unicode natively by exposing and not the character Formats.

  See: TOC link with a character index does not in PDF format

• I can't get the page numbers in my table of contents to update when I update the book.

  
  I use Framemaker 11 and I have two tables of contents in my book: one in English and French. Each table of contents to links to various documents in the same book. The reference page for each table of contents is defined and properly displays the positions 1 and 2, I said that it appears, but numbers not updated when the contents of my document files change to another page. I checked the settings of conditional text in my document files; they are correct. When I update the book, I choose to update the numbers, all the cross-references, all text inserts, OLE links, generate a Table of contents, lists, and indexes. What I am doing wrong? Thank you.

  If they are not knocked down, then they are certainly not generated files. See the example in the help of FM11: http://help.adobe.com/en_US/FrameMaker/11.0/Using/images/bk_hier_books.png

  The 'K' is a TOC file that FM recognizes a generated file.

  Because you have created your table of the contents of the French with the help of another structure of the book, you could import reference this TOC file in another file of FM (for example to create an inset text) in the main book you want. However, you need to make updates in two steps. First update the French book to revise the table of contents. Then update the main book to get the rest of the correct pages (and given that the table of french contents are imported by reference, FM always uses the most recent version).

• How we understand the equivalent page number in the printed version of the book?

  I am a teacher and I attributed to my students the printable version of a book. I read the book in ibooks and now have to find all my quotes highlight page numbers in the printed version. Is it possible to do this?

  I think all you can do is to compare the total number of pages in both versions and apply the appropriate for your quote numbers percentage.

• How can I get the action to hide the table of contents to work as part of a conditional Action?

  GOAL: when a user takes the Quiz and fails, I wish they were able to get back underway and reviewing the materials before taking the quiz. As noted in other discussions, I have created actions advanced conditional and standard to achieve this:

  • Quiz results Slide Property executes the standard action "ResultsSlideVisitedAction", affecting a variable (AssessmentVisited) to 1, an indicator that the result slide has been visited.

  

  • If a user clicks the Retake Quiz button, instead of going to a "knowledge management", a quiz question classified early in the race with zero points, it goes to the first real quiz question. The slide to check knowledge runs the 'ExcludeKCAction', a conditional, looking to see if the result slide has been visited, which means that the quiz taken. If so, he jumps at the 1st question of the quiz slide.

  

  • I changed my Quiz message fail to tell the user to click the button Retake (which works fine) or navigate using the table of contents to review topics and then resume the quiz. The problem with this is that if a user uses the table of contents and gets to go to the slide to verify the knowledge to conditional action, they are sent directly to the Quiz.
  • So, I took a different tact and decided to ask the user to use a "Back in the race" button to review the course and then resume the quiz. Because you cannot add buttons to the slide of results, I created an invisible button to reset the AssessmentVisited variable to 0, so when the GET to the verification of knowledge, they are not sent for the quiz. I did this by adding the image on a button, and then by superimposing an invisible rectangular shape on top of the button image. This allowed me to add advanced invisible form actions. It worked!
  • The last thing I want to do is to hide the table of contents, so there is no chance of the user to return without resetting the variable. I tried to add the action to hide the table of contents, but it doesn't seem to work. Is this possible?  I tried to move the TOC to hide as actions of 1st, 2nd and 3rd and sill does not. Here is a screenshot of the conditional action that runs when a user clicks on my return to the button a course:
  • 

  I appreciate any thoughts on a solution to hide the table of contents as well. Thank you.

  Hide the TOC works only for OCD in overlay, you use a table of contents separate?

  With respect to the Score slide buttons, you make it very complex, it is possible since version 6: buttons on Question/Score 6 Captivate Slides?-Captivate blog

• How to use the search bar 'Find' in the table of contents to find the script FULL of my course?

  Hello

  My project contains voice narration with the support of chips. Start-up option "find" in the table of contents looks only bullets of text on each slide to specific words. Is there a place I can insert the full script (rather than the abbreviated chips) spoken by the narrator in my class so that the option "find" search in these words?

  Thank you!

  Hello!

  Captivate, in fact the finding of OCD to retrieve and search for the text content of slide and slide labels usage.

  What you can do to get your full script to work.

  (1) add a text caption slide.

  (2) paste is your complete script. (From slide notes)

  3) go to properties of legend text-[disable] option which does not show in the output.

  In this way, you would have all your content on the slide to search for in the table of contents, but still not visbile to users, they would continue to see the short balls.

  I hope this helps.

  Thank you!

  Anjaneai

• How to get the page number

  Sorry, but again I question. I want to select table by ID, where ID should be equal to the current page number. How can I get the page number?
  
  Davyd

  Try

  where ID = v('APP_PAGE_ID')
  

  Jeff

• How to remove a page number for a specific page

  I am editing a book of poetry in pages and my start of document with a title page, followed by a couple of blank pages, followed by the table of contents pages followed by the rest of the book pages.  Now I have whole page numbering upwards in the foot with the option of "not visible on the first page.

  My problem is, I want to delete the page number of these blank pages after the title page, but keep the numbering goes after that. However, if I try to delete the page number in the footer of specific, it removes all the footer later (or alternate footers.)

  So my title page is number 1, but some like "poster is not on the first page" it does not show the number, that works.  Page 2 and 3 are empty then 4 page is the first page of table of contents, etc..  I want to make pages 2 and 3 show not the foot of page/number, but keep page 4 and beyond.

  Thanks in advance!

  You did not have the Pages you use. I'll assume Pages 5.x

  Click on the last page you want to have no Page number > Menu > insert > Section break

  Click in the next Section > toolbar > Document > Section > Page numbers > start: 1 > numbering > uncheck continue from the previous section

  If there is a Page number in the previous Section, remove it.

  Peter

• How to associate a value in a cell with a page number?

  I have a series of diagrams that I would like to create a table to display the page on it's, as well as a description of it. When creating, I store simply the value of the page number in a table and use it when creating the table, however, if the chart is moved to another page, then the cell displays the wrong page number, and the table loses its meaning. Is there a way I can link the page number displayed in the table cell with the number of the page currently?

  If you are on CS4/5, you can use the reference feature to get dynamic page numbers. The diagram is a picture, isn't it? You can add a block of text to the graphic image containing the image (use the same geometric limits so that the two frames of the same size; no line, no fill - btw you can do only by the script, not interactively in InDesign) and add a hyperlinkTextDestination . So when do the diagrams, you just update the references.

  Kasyan