Drivers DVR HV4000

Similar Questions

• can't get the drivers for the cd/dvr device does not read or write

  original title: can not get the drivers for the cd/dvr device read do not or writeing

  How do car keys DVD for read or write on vista premium.  the drive has failed. ?

  Try to run planned it from this link:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• Satellite A100 PSAAN: need drivers Vista for Pioneer DVD - RW DVR-K17A

  Someone at - it a Vista driver for readers PIONEER DVD - RW DVR-K17A installed in my Satellite A100-PSAAN model? -Tosh or Pioneer want to know.

  Vista driver? Sorry, but Toshiba does not offer driver for optical disc drive. ODD uses the standard Microsoft driver. You have a problem with it?

• Satellite A45: need to update firmware on DVR K12D drive

  Hello...
  IM new here... Well, I have a toshiba > Satellite A45 Series... which had a DVD Multi Drive (DVR K12D) inside. The problem is that his operation stopped. Sometimes she would write a CD then sometimes it spoils my CD. I used on the media player were Verbatin, Imation, Supermedium, Sony.

  Well the reader works as a very short period and then dies OFF... every time I took it to the repair center...

  The drive has been changed now 4times by toshiba support. I asked for the release of Firmware from 1.05 to 1.15 or higher. They keep answering back telling me to ask pioneer. But it is an OEM obvious by toshiba.

  The player after having been changed stops working without delay of 2 to 3 months max 4 months time and den customer tried upgrading the drive by putting a higher config recorder multi disc double tht is the 8 GB one. The satellite detects that hardware.

  been 2 years now my readers send me problems such as:

  does not read DVD
  doeant read CD RW
  don't write CD/DVDs
  sometimes DVD detects any sometimes they detect its weird.

  The only solution is to update the firmware, but how can I do? I need the update of the firmware. I called toshiba WE also, they talked for two hours and then answer that I have to contact pioneer!

  Please help me!

  Vik!

  Hello

  CD/DVD players support generally not all means.
  As far as I know in the manual you will find a list of the CDs and DVDs is supported and it works properly.

  In addition, it seems that this device was designed for an American market and in this case, you should look at the Toshiba Site us.

  I checked this American site:
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/Su/su_sc_home.jsp

  There, I found several notebooks A45 and the necessary drivers. I also found a driver for DVD rom and ram. It s not a firmware update but maybe it helps.

  However, on Toshiba Europe site, I found several updates firmware for the readers and the different European books but as I said at the beginning you have a US laptop and have to look on the American website. If you don't get an update of the firmaware if you ask the manufacturing of the car.

  In addition, I want to say that you can not be sure that, after updating the firmware of the player will not work correctly. This kind of malfunction looks like a defect of lens calibration and therefore only a replacement disc can solve this problem.
  If the drive has been replaced several times so I guess that the guarantee is valid and you will get a new.

• I can't find the driver for my "easycap usb 2.0 dvr."

  I have a "easycap 4CH usb DVR surveillance system" including the disc, but when I try to use it I get the message "not found valid video capture device". I think that I must correct driver for this device.could you help me please? thanx

  Hello

  For all external devices, it is the responsibility of the manufacturer to create the drivers. So, you will want to visit the support Web site for the one who makes this device and find the driver appropriate for your version of Windows.

• Drivers for my Vaio PCV-RX670 desktop computer

  I run Windows XP and have damaged drivers for the drive CD CD-S400/A Asus and Pioneer DVR-104 DVD - RW drive - where and how can I find/download/install the appropriate drivers

  Hello

  I suggest you to download and install the Asus driver from the link below.

  http://support.ASUS.com/download/options.aspx?SLanguage=en

  As for Pioneer DVR - 104 DVD - RW discs install from the link below.

  http://eSupport.Sony.com/us/Perl/model-home.pl?MDL=PCVRX670&template_id=1&Region_ID=1&tab=download#/downloadTab

  See also:

  Automatically get recommended drivers and updates for your hardware.

  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  Hope this information is useful.

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Try to add the 2nd COR/DVR Player

  Need help. I have a new Tower of Pavilion A6600Z. Comes with 1 CD player DVR and I want to add a 2nd unit. Only two cables power and date SATA is already connected to the motherboard, one for the hard drive and the other for the optical drive DVR. Here's the Red tablecloth with black connectors cables. I need an another data connector!  A data connector can be grafted onto a second connector? I found where I can get a PSU out of Amazon. I already bought the second player (SATA) of HP DVR and just need to know how to connect as indicated, only two sockets on the motherboard SATA. The inside of the computer is full of type PATA connectors, unusable or you can get a SATA-PATA adapter?. Motherboard is an Asus M2N68-(Ivy8).  Any advise?

  Message edited by raco43 on 05/10/2009 12:35
  Message edited by raco43 on 05/10/2009 12:53
  Message edited by raco43 on 05/10/2009 13:10
  Message edited by raco43 on 05/10/2009 13:12
  Message edited by raco43 on 05/10/2009 13:30
  Message edited by raco43 on 05/10/2009 13:53

  @raco43: I would have gone with the types of PCI-e x 1 myself, but I think you know what you're doing.

  The SATA drives are soft. So easy to install and these cables of small footprint. FOR INFO. Use caution when you plug the connectors. It is easy to inadvertently break the location on the disc guides trying to connect the cables backwards.  The only time where I ran into disputes with the SATA, cards and drivers associated has been with Windows Vista.

  Published by erico on 2009-05-11 11:45

• Pioneer DVR-KD08 issues on Windows 7

  Hi!, I'm asking here beucase is my last choice... I had Windows Vista Home Premium installed on my Sony Vaio VGN-CR460F, which has the CD/DVD Pioneer DVR-KD08 ATA attached... but well, there is NOT a driver for the CD/DVD drive... that's why sony vaio using a driver Optiarc AD - 7260S... but the problem is the following:

  After installing my new Windows 7, the software did not recognize the driver Optiarc AD - 7260S, he places a 'Pioneer' Driver, but this driver does not work... and when I try to find any other driver, he says that he's already been materialized, so he won't find all...

  The first question is: where can I find a driver (driver Optiarc AD - 7260S) so I can install it MANUALLY (with no configuration... it doesn't let me install if is an installation program)

  Now... After looking for drivers, I went to Sony ESupport Page... and I have downloaded the updated driver Optiarc... but when I try the update... it wont let me, because windows 7 recognized the Pioneer drive (it was like optiarc in vista back then) since windows 7 recognizes the Pioneer drive... Optiarc UPDATE or even used Driver SETUP I would install it... (It is said: instalation error, there is no Compatible drive...)

  So mi second question is: How can I update my drive with the update installation program? ... Given that windows 7 recognizes the drive as pioneer... it says it is not compatible with the installer! ...

  I ask this because after upgrade my Windows Vista to Windows 7, the player collapsed to be able to read or write any DVD or CD, I tried to make it work with Mr Fix It Windows... and deleting the LowerFilters and UpperFilters registry... Then please don't answer that...

  I just need one manually to install my driver to make it work.

  Thanks :)

  Hi RoZuRiGo,

  1. What is software that does not recognize the drive?

  You can first try uninstalling the software Pioneer.

  Step 1:

  Uninstall the drivers Pioneer

  a. Click Start and type in Device Manager in the start search and press ENTER.

  b. expand the game sound and video controller in Device Manager

  c. right click on the audio device and click Properties

  d. click on the driver tab and click on uninstall the drivers and click OK.

  Step 2:

  You can check the following link and try to install the firmware in Vista compatibility mode and check.

  http://www.Sony-Optiarc.EU/SupportService/downloads/fwdownloadpages/ADseries/ad7260sfwfile.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to get free downloads for drivers for a M1050y Media Center

  Frys is a removal of viruses on the computer and now I don't have a lot of my drivers.

  How to get drivers for my DVR/W drivers and printer drivers

  Hello

  Check the HP support site for drivers for your M1050y.  Try the scan function and see what he suggests. At the bottom of the driver page, you will find a video on how to find the drivers for your PC.

  The virus may have done a lot of damage of software on your PC. You should consider restoring your PC by using the HP recovery media.

  View the HP printer model and we can search for printer drivers.

• MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE).

  MY DVD - RW DVR-112D ATA DEVICE IS ONLY PLAYBACK DVD VIDEO (EX MOVIES). BUT NOT READ ANY OTHER TYPE (E.G. SOFTWARE). Everytime I put a dvd movie it plays automatically, but any other type of cd it will say insert disk. One has had this problem?

  Hello

  You have disk problem as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read).
  Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Several good info here:
  http://Club.myce.com/

  Notes on the troubleshooting and repair of readers of compact disks and CD-ROM Drives
  http://www.repairfaq.org/repair/F_cdfaq7.html#CDFAQ_014

  ----------------------------------------------------------------------

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Windows on hardware drivers from Bootcamp

  Hello

  When Windows 7 is finally installed, it seems as it lacks the network drivers and therefore it is impossible to get online. Is there something I can do to get the drivers advancing him?

  Thank you

  Download your year/model Mac-specific drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and run setup.exe from the folder of side Windows boot camp.

• Big problem in the finder then the copy of the file trought different drivers

  For my work, I download and archive about 100 GB of photos every time.

  After upgrading to Mac OS sierra I meet big difficult.

  1 copy a lot of files require a lot of time more instead of last osx (about 4-5 times more)

  2 - from multiple instances of copy beginning with a lot of delay (approximately 5-6 minutes after the control drag & drop or copy/paste)

  3 - once the completed instance disappear and always with "0 file to the end" for a long time (about half the time of the copy) and in any case until all istances have been terminated

  4 - after all: not all the files are copied (the last time about 300 files are lost in a total of 4000)

  before all the reactions:

  -all my system works perfectly before the sierra of macos

  -all my drivers are fully working (tested in ather Mac without sierra)

  -a speedtest with the blackmagik tool say that the system can still run at full speed

  -If a script third spear the copy no problem

  that: in my experience, the question is on sierra finder.

  clearly, I can't work with this type of system, that:

  When apple will fix problem of che?

  How can I return to osx than el capitan without lost my documents and applications?

  Thank you

  > How can I return to osx el capitan without lost my documents and applications?

  This link is for El Capitan, but it also applies to the Sierra:

  OS X El Capitan: revert to a previous version of OS X

• Intel graphics drivers

  Then I looked around my graphic driver updates and I don't really know where to go.

  The Intel Web site has NONE of the Mac (proof https://downloadcenter.intel.com/product/80939/Graphics-Drivers) compatible graphics drivers, and is the Intel Windows drivers update utility only.

  First question; If the Mac comes with so many Intel drivers, why does it seem like Intel does not give a shit about us?
  Second question; How to upgrade my drivers?

  Are equipped with all the necessary drivers for the graphics units Intel Mac Minis running OSX / integral with the OSX provided by Apple. No additional drivers/updates are available except an OSX update or update OSX

• anniversary 10 Windows update breaks the bootcamp drivers

  I bought the home edition of windows 10 must be installed with bootcamp on my Mac Pro (latest version).

  After a few seconds the bootcamp drivers installation, I get a blue screen saying "kernel Security Check Failure. I tried to re-parititon and re - install windows with bootcamp 10 several times and the results are the same. I found an earlier version of windows 10 online and when I tried to install it, the problem goes away. but then when I update this old windows 10 with the update of the anniversary, the problem appears again. so I guess that the problem is related to that! in safe mode I get no blue screens. today I intend to try to uninstall the driver of each training camp in a tower, until I tell me what is the cause of blue screen. so far, I removed the graphics drivers, but the results are the same.

  If anyone can provide all the information on how to study this issue further away, or maybe even solve it, I'll appreciate it more! Thank you

  My Sepcs are:

  Graphics card: Dual AMD over-pants D300

  Processor: Intel Xeon E5 1620 v2

  Memory: 12GB DDR3

  I suggest you that stay with the working version. Please see Re: Windows 10 anniversary + Boot Camp = Assembly is more Mac partition for more details.