How to keep sites open only

Similar Questions

• How to keep each "open in Windows Mail file"?

  I use "Windows Mail" folders as a workbook.  But when I open or try to put something in a folder it opens and it takes forever to get to where I want to msg to go to.  Is there anyway I keep opening for 100% and just open the subfolder that I need?

  Why have they changed it in Outlook Express, that was such a good and well-organized program?

  Thanks in advance for the help!

  If you have 10 subfolders under one main folder, you do not see them all or none. It was the same in OE. If you want to 'post a message', expand the folder tree and drag the message into the folder wanted.
   
  Unless you make to each folder a subfolder of the folder above instead of the main folder, it should not take longer to get where you're going, regardless of the number of subfolders.
   
   

• I made my largest site and how can keep the same size for all other sites?

  I did the 2 larger site and how to keep the same size for all pages when I re - open the web browser?

  You can use an extension to set a page zoom and the size of the default font on the web pages.

  • Default FullZoom Level: https://addons.mozilla.org/firefox/addon/default-fullzoom-level/
  • NoSquint: https://addons.mozilla.org/firefox/addon/nosquint/

• How to keep the Safari in full screen, when it opens instead of small rectangle I enlarge them with green button and how to keep the presentation of upper task bar without always having to lower

  How to open safari in its entirety in a small rectangle and then having to enlarge.  It started to happen.

  How to keep the top toolbar in view rather than having to lower whenever necessary

  Drag the bottom right and left corners of the window to enlarge it to fit the screen.

• How do you see your bookmarks if you have a Web site open?

  It doesn't seem to be any drop-down menu or the button to display your bookmarks while you are browsing Web sites. I have to close all the tabs, and then there is a bar at the top that says bookmark. It is not very practical when you're in the middle of the navigation. I tried to leave a tab open to just my favorites and other tabs to my bookmark tab open, but when I go back to my bookmark tab, it is all reset and I have to start all over again drill down bookmark files. Yet once, is not useful at all. Is there an easier way to access my favorites while having Web sites open?

  To check the bookmarks that you do not have to close tabs. Type right on the address bar or open a new tab and tap on the Bookmarks panel.

  There is no drop-down menu or list button to display the bookmarks. The reason for this is to simplify / unify UI keep lightweight browser as mobile devices generally have fewer resources and space on the screen compared to desktop computers.

• How to display two open sites at the same time on the screen instead of switch between tabs?

  I need to open two different sites using Firefox. They appear as tabs, but I can only show a tab at a time and have continually switch back. I need to have two separate sites open and displayed simultaneously on the screen. Is there a way to do this or an add-on that will support multiple windows open on the screen?

  You can open all pages in separate windows and resize and position windows horizontally or vertically to the two visible at the same time.

  Note that you can drag a tab slightly downwards in the navigation window to tear off the tab, or use the context menu of the tab (transition to the new window).

• When I go to start-run and type ipconfig it happens only for a second. How I keep reading?

  When I go to start-run and type ipconfig it happens only for a second. How I keep reading?

  Hello

  • Click Start
  • Click on run
  • Type cmd and press enter
  • In the black window resulting type ipconfig and press enter

  Tricky

• Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Hello, I accidentally opened an old file Ircat... and now can't figure out how to return to my only current.  With the help of Mac Yosemite, Lightroom CC

  Thank you!

  File-> open recent. Lists the catalogs you have opened and will allow you to choose one of the previous catalogues.

• How a Web site can be opened using Adobe PDF Script chrome?

  How a Web site can be opened using Adobe PDF Script chrome?

  An Internet Explorer site can be opened with: app.launchURL ("the Web site name", true);

  You can't decide which browser will be used. This is a setting of the machine where the file is opened.

• How can I put HTML codes with muse cc? I have to put a watch on my site, I only codes HTML

  How can I put HTML codes with muse cc? I have to put a watch on my site, I only codes HTML

  Hi Antonio,.

  You can use the object > option to insert HTML code to add your code to the page.

  Kind regards

  Aish

• How to attract attention and keep an open dialogue?

  Hello

  I have a dialog that must have informed parameters.

  If the user forgets something, I want to draw attention to him and keep an open dialogue.

  My 'code' is:

  if (w.show() == 1){
       if settings not filled in, alert and exit();
       do work
  }else{ exit() }
  

  The problem is that this way, the dialog box closes and the user must rerun the script.

  So, I made a function onClick for the OK button that checks these settings and alerts if missing.

  However, the main function now not get executed! Press ok does nothing (apart from the verification).

  So I tried to call the main function of the onClick function...

  but then I get an error message "cannot process the request because a modal dialog box or the alert is active"

  What is the correct way to do it?

  How can I alert him if something is missing, but keep open dialogue?

  Thank you

  David

  Hello

  I mentioned initially button.enabled property set to false .

  And Yes - code should collect each required field contents using, i.e. the onChange event.

  If 'all' is true ==> button.enabled = true;

  Just in brief...

  Jarek

• When you use Internet Explorer and Adobe Reader xi, I can't find how to keep the Page to hide thumbnails. We want they is open.  Help, please!

  In Internet Explorer, when you open a PDF using Adobe Reader XI addon IE, the Page Thumbnail toolbar is shrunk to the (hidden) left.  Our users access the thumbnails constantly and we need to stay open by default, but I find anywhere that this option is set.  I expect there to be an icon PIN click to keep it open.  We found in the stand-alone product Adobe Reader, you can click on ' restore last display settings when reopening documents. "in preferences of Documents, but it does not work for new documents (already open docs only) AND doesn't work at all in Internet Explorer.

  Any help would be greatly appreciated!

  Marc

  Laughing out loud

  While it is important that much, maybe, someone needs to spring for a copy of Acrobat and be in charge of adding this feature.

• How do we keep applications open automatically at startup

  If I don't stop apps on my MacBook air shutdown, whenever I turn it on onagain thoseapps open automatically comes with the whereileft of windows. It's pretty boring, so I want to know how to prevent the opening automatically at windows startup. I have El Capitan 10.11.1 on my laptop.

  System Preferences > users and groups

  Click on the padlock and and authenticate.

  Select the account. Click the login items tab.

  Highlight the application. Click on the "-" button in the lower left corner.

  Section: Use login items

  https://support.Apple.com/en-us/HT204005

  Partners:

  https://support.Apple.com/kb/PH21985?locale=en_US

  https://support.Apple.com/kb/PH22003?viewlocale=en_US & local = en_US

• I tried dnlding flash player @ least 30 times... Most of the time he worked, but only for 1 session... I even disabled my AV, how to keep in my system or get HTML 5

  I tried dnlding flash player @ least 30 times... Most of the time he worked, but for 1 session... I've even disabled my AV, how to keep in my system, or get HTML 5?

  Hello

  How are you trying to download Flashplayer?
  I suggest that you follow the methods provided and check if it helps to solve the problem.
  Method 1:
  See the link, then run the Fixit. This will help remove all traces that might have left a previous installation of Flash Player.
  Solve problems with programs that cannot be installed or uninstalled
  http://support.Microsoft.com/mats/Program_Install_and_Uninstall
  Method 2:
  Step 1:
  Perform a clean boot and install Flashplayer. Clean boot to disable non-Microsoft services which can otherwise cause conflicts during installation. Check out the link and follow the steps.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Important: after you have completed troubleshooting. Make sure that you follow the steps in the article to put the computer from starting in Normal mode.
  Step 2:
  See the link, download the application on your desktop computer and then run the installation.
  
  http://get.Adobe.com/flashplayer/
  Alternatively, you can contact Adobe support on this issue. Check out the link.
  Flash Player Help / installation issues. Flash Player | Windows

  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

   

   

• "Hide / show" regions – how to keep open after send the page

  Hello

  I have several regions ' hide / show ' in my request... when the user submits the page, it closes all the

  is there a way to keep one open that were opened before the page is sent?

  Thanks in advance

  Long answer: forget the hidden item and simply store the values in a cookie.  Use dynamic action, 1 2 plan to store the values when the page is submitted and the 2nd DA to retrieve the value and developing regions.

  Hide and Show parts APEX sticky

  Dynamic action 1

  Name: Save the open areas

  Event: before the Page is sent

  Condition: - no requirement.

  Real Action:

  Action: Run the JavaScript Code

  Fire on Page load: [disabled]

  Code:

  var lOpenRegions = []
  $(".hide:visible").parent(".hide-show-region").each(function()
    { lOpenRegions.push($(this).attr("id")) });
  SetCookie("HideShowOpenRegions",lOpenRegions.join(","));
  

  Dynamic action 2

  Nom : Open saved regions

  Event: Loading the page

  Condition: - unconditionally.

  Real Action:

  Action: Run the JavaScript Code

  Fire on Page load: [disabled]

  Code:

  if (GetCookie("HideShowOpenRegions")) {
    $.each( GetCookie("HideShowOpenRegions").split(','),
              function(intIndex, objValue) {
                $("#"+$nvl(objValue,"x")+" .hide:first").show();
              }
    );
  }