How to let 2 (connected to VPNc) clients communicatie to eachother

Similar Questions

• Wireless network is displayed with a cross and will not let me connect saying the settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again?

  hardware device

  my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(

  Hello

  What operating system installed on the computer?

  Note: Look for errors in the network card device manager.

  Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  Method 2:

  He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.

  For more information, follow the below mentioned article:

  Set up a wireless router:

  http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router

  Follow the below mentioned articles and see if they help you:

  Set up a wireless network:

  http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network

  Wi - Fi and in Windows network connection issues:

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Wireless network card: frequently asked questions:

  http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions

• Smartphones blackBerry how to myBlackBerry House works its not not let me connect: S

  I put in the correct connection information and it still gives me a wrong user name or password has been entered and I reset my password but it still does not can anyone help? !!! PLEASE, I BEG YOU!

  I have the same problem. Detals of connection are correct, but it won't let me connect just repeat myself here wrong? any help would be nice thx

• How to let axSequenceView view the sequence file, after the opening before the race.

  

  How to let axSequenceView view the sequence file, after the opening before the race.

  I would do it differently, you do not see when running because your sequence control is connected to the requeteexecution Manager. I have two controls of the same size that sits on top of the other, one connected to requeteexecution as it is by default and the other to SequenceFileView Manager.

  You can then use reminders to start execution and execution of end events in the user interface to make the control visible. It is very easy to achieve.

• Windows Home page will not let me connect you / administrator

  on the windows for users login. Kathy/administrator won't let me connect. I have to use other users. so I can't get my computer to work properly. He will accept my password.

  Hello

  1 is that other users are standard users?

  2 - is the administrator account accepts the password or not. ?

  You can refer to the suggestion contained in the link and check.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account
  http://support.Microsoft.com/kb/940765

  You can also see the link provided to know more about lost or forgotten password.
  Microsoft's strategy concerning lost or forgotten passwords
  http://support.Microsoft.com/kb/189126/en-us

   

  Provide us more information for you to help.

• My computer won't let me connect to one of my accounts. The screen remains blue or said: "this product must be activated with microsoft" why is this?

  My computer crashed on me and when I tried to reboot, the computer would not let me connect to my own account, nor my accounts of family members. I tried to use the System Restore tool, but the computer says that the menu command / I'm trying to use does not exist. I don't have the CD or the floppy to boot. When I try to log in to my administrator account on the computer says, "this product must be activated with Microsoft."  Can anyone help?

  Hello

  If you are unable to connect to any user account then, how did you try the System Restore tool?

  We will try these steps and check.
  Step 1: Use know last good Configuration option and check.

  Step 2: Check to see if the problem persists in safe mode. If the problem persists not in safe mode and then try to perform the clean boot.

• MS Money 2007 on Win XP doesn't let me connect online telling me that Windows Live cannot check my login information.

  MS Money 2007 on Win XP doesn't let me connect online telling me that Windows Live cannot check my login information.  It happened all of a sudden in the last days.  I have yet to receive a response to this problem that works.  Everybody doesn't know how to fix this?

  The same question in the Windows 7 forum - and it worked

  1. Start Money
  2. In the connect to open your Money file page, type your Windows Live ID credentials, select thework offline check box and then clickNext

     Note If you have recently changed your Windows Live ID password until you have used the money, make sure you use the last password that worked with money. Based on your version of Money, your experience may be different. Basically, start, get the error of not being able to connect and continue so that you get cash itself

  3. On the file menu, click Password Manager (for Money 2002, clickconnection security box ), and then clickRemove .

     Note If you are prompted to disable MSN Money Web access, follow these steps, and then repeat step 3.

  4. Click disable this Passport for use in money , and then clickNext. Again once, different versions of money show different dialog boxes - the key is that you want to delete automatically connect with your live account.
  5. Click Finish , and then wait for the process of change in the credentials to fill.
  6. Click OK .
  7. Output of money.

  Once you disable the passport for use in Money and restart, you can resume your access to all of your financial institutions.  You will not however be able to be synchronized with MSN Money, which is the purpose of doing in the first place. I found that you can always update your accounts as you have always done and during the stock market always automatically up-to-date.

• I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  I will not let me connect to my main, connect you to where I put my password in and then logs on just continuous vista startup repair in time ever I start my computer

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• Connection problem: trying to connect to my computer at the title of the administrator, but after I put my login in it goes to check on the page and will not let me connect

  Try to connect to my computer as the administrator, but after I put my login in it goes to check on the page and will not let me connect. The regular connection for the computer works fine.  Any ideas?

  Try a system restore to a Date before the problem began:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  It is the instance of Vista installation.

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/threads

  Adjust settings, manage user accounts.

  Try the Forum above to repost, if necessary.

  See you soon.

  Mick Murphy - Microsoft partner

• How do we install the default mail client?

  How do we install the default mail client?

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  'Change the programs that Windows uses by default'

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).

  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• How to find the properties of thin client, PC?

  Original title: Thin Client

  Hello

  How to find the properties of Thin Client, PC.

  When I check the properties of my computer it shows properties of a server

  and also I check with cmd Systeminfo it shows also the connected server properties

  Hi Yogi,

  Thanks for posting your query in Microsoft Community.

  According to the description of the issue, I recommend you post your query in the TechNet Forums. TechNet is watched by other computing professionals who would be more likely to help you.

  TechNet Forum

  Hope this information is useful.

• My computer won't let me connect to my profile

  My computer won't let me connect to my profile just, it stays on the loading screen then goes to a temporary profile, how can I fix?

  Hello

  References to Vista also apply to Windows 7.
  
  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
  Mode has no default password (unless someone has changed the password so it should be available).

  Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
  has been known to cause this problem.

  Error message when you log on a Windows Vista-based or Windows 7 using computer a
  Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
  This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

  You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
  (or two with the same password) use a test or fix the other.

  You can run the Admin account hidden from the prompt by if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  If you cannot access your old account, you can still use an Admin to migrate to another (don't forget
  always leave to an Admin who is not used except for testing and difficulty account).

  Difficulty of a corrupted user profile
  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  I hope this helps.

• Estamos tendo problemas, Bivvy again but some soon. SE o problema persistir between em let com o Suporte ao client. "We have problems, try again at the end. If the problem insists, call the suport. " Whay?

  Estamos tendo problemas, Bivvy again but some soon. SE o problema persistir between em let com o Suporte ao client. "We have problems, try again at the end. If the problem insists, call the suport. " Whay?

  Lacruz0609 are you trying to download and install after effects CC 2015?  If yes then please see download and install Adobe Creative Cloud applications for more details on how to install After Effects via the Adobe Creative Cloud desktop application.

• How to start the connection broadband with Portege R930

  Hello
  The manual doesn't really explain how to start a connection with the R930 broadband.
  I have a SIM card but not express or the smart card into the card slot
  Which one should I buy?

  The blue button on the touchpad is always turned on, but there is

  2nd question:
  The WiFi works, there is an Ethernet cable, if I want to use, then the - future - Broadband card.
  How can I manage when I'm close to a working WLAN pc does not use the link high pay rate, but the ethernet cable or WLAN radio link?

  TIA
  Frank

  The easiest way is to connect to an access point or wireless access point wireless.

  If the R930 is a modem 3G / 4G, you can use a SIM card.

  You must disconnect the connection 3G / 4G, if you want to use the WLAN.

• Messages will not let me connect my Apple ID

  Recently, I've restored my laptop to factory settings. When you try to set up the Messages, it wouldn't let me connect my Apple ID. I know he recognizes when I use the right credentials, because he tells me that my password is incorrect, when I enter the wrong password. When I enter the password, the ID and the password letters out gray (is no longer editable) for one second then back to black (you can type in the box again). I would really like to be able to text my cell phone, so please let me know what I can do about it.

  There are hundreds like you with the same question... all I can advise is, relax, go get a drink, there is no solution, the only solution is to wait for the apple engineers to fix it... I tried to solve this problem for 11 hours... ABSOLUTELY everything tried... nothing doesn't work, don't waste time lol