How to limit the client VPN connection time in Router2821
I have install a cisco router with VPN (client) 2821 and it works very well.
All the configurations that I did via CLI
But I want a customer to have vpn user:
Connection time maximum 30 min
Maximum idle time 15 min
Where should I put this command?
Kind regards!
Hi Lasandro,
Looks like max connect timer is not yet available, but the timeout is.
You can configure in the dynamic plan using the command 'set security association idle-timeout' .
Or apply globally with periods of inactivity of 60secs just to check:
"crypto ipsec security association idle time 60.
HTH.
Portu.
Please note all useful messages.
Tags: Cisco Security
Similar Questions
-
How to limit the number of connection to DB
Hello
I just go to the topic of connection pooling.
Here, I would like to understand the number of details of connections that already exists in the database.
Kindly guide me to know the following details.
How to know the number of connections available in the database?
How to limit the number of connections?
V_$ Resource_Limit contains details of the sessions. Is this even for connections?
I have more clarification on the difference of connections and Sessions.
Kindly tell me the above.
Thank you
Orahar.Orahar wrote:
HelloI just go to the topic of connection pooling.
Here, I would like to understand the number of details of connections that already exists in the database.Kindly guide me to know the following details.
How to know the number of connections available in the database?
The number of currently active sessions (db, internal sessions registered)
SELECT COUNT (*)
SESSION $ vHow to limit the number of connections?
to increase or decrease the maximum number of connections:
for example: change processes control system = 200 scope = spfile;
>
V_$ Resource_Limit contains details of the sessions. Is this even for connections?
I have more clarification on the difference of connections and Sessions.
Connection means a user process is successfully connected to the listener to have a session on the database running instance. (listener who listen s new connection requests)
Establish sessions: means, a (dedicated) server process began to serve a user process. It is done when the credentials of the user authenticated successfully. Now, from process-user shall communicate to the server process directly.hope that helps.
Kind regards
X. -
How to force the client to connect to the specific access point?
I have a client that connects to an Access Point to the upper floor. The connection is "Very low" and pings are restless. Is there a way to force the client to connect to the point of access on its own soil in the hallway.
Access Points using 1131AG; WLC2106
PSK + WPA2
Thank you
There is not a way to force the client to use a specific side access point controller of things. According to the specifications, the client decides when and where to associate. You can try to disable some of the rates below data or lower power tx of the AP to reduce the coverage of each access point cell. By doing this, the client cannot see the other as favourable AP.
-
I have a new time capsule airport. How to limit the search for who can use the time capsule backup process?
Set a password to disk... disk tab in the utility... and just give to those you want to use the TC...
-
The VPN client VPN connection behind other PIX PIX
I have the following problem:
I wanted to establish the VPN connection the client VPN to PIX on GPRS / 3G, but I didn t have a bit of luck with PIX IOS version 6.2 (2).
So I upgraded PIX to 6.3 (4) to use NAT - T and VPN client to version 4.0.5
I have configured PIX with NAT-T(isakmp nat-traversal 20), but I still had a chance, he would not go through the 1st phase. As soon as I took nat-traversal isakmp off he started working, and we can connect to our servers.
Now, I want to connect to the VPN client behind PIX to our customer PIX network. VPN connection implements without problem, but we can not access the servers. If I configure NAT - T on the two PIX, or only on the customer PIX or only on our PIX, no VPN connection at all.
If I have to connect VPN client behind PIX to the customer's network and you try to PING DNS server for example, on our PIX, I have following error:
305006: failed to create of portmap for domestic 50 CBC protocol translation: dst outside:194.x.x.x 10.10.1.x
194.x.x.x is our customer s address IP PIX
I understand that somewhere access list is missing, but I can not understand.
Of course, I can configure VPN site to site, but we have few customers and take us over their servers, so it'd just connect behind PIX VPN and client connection s server, instead of the first dial-in and then establish a VPN connection.
Can you please help me?
Thank you in advan
The following is extracted from ASK THE DISCUSSION FORUM of EXPERTS with Glenn Fullage of Cisco.
I've cut and pasted here for you to read, I think that the problem mentioned below:
Question:
Hi Glenn,.
Following is possible?
I have the vpn client on my PC, my LAN is protected by a pix. I can launch the vpn client to connect to remote pix. Authenticates the vpn client and the remote pix makes my PC with the assigned ip appropriate to its pool of ip address.
The problem that I am facing is that I can not anything across the pix remote ping from my PC which is behind my pix. Can you please guide me what I have to do to make this work, if it is possible?
My PC has a static ip address assigned with the default gateway appropriate pointing to my s pix inside interface.
Thank you very much for any help provided in advance.
Response from Glenn:
First of all, make sure that the VPN connection works correctly when the remote PC is NOT behind a PIX. If that works fine, but then breaks when put behind a PIX, it is probably that the PIX is PAT, which usually breaks IPSec. Add the following command on your PIX VPN client is behind:
fixup protocol esp-ike
See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/df.htm#wp1067379 for more details.
If it still has issues, you can turn on NAT - T on the remote PIX that ends the VPN, the client and the remote PIX must encapsulate then all IPSec in UDP packets that your PIX will be able to PA correctly. Add the following command on the remote PIX:
ISAKMP nat-traversal
See http://www.cisco.com/univercd/cc/td/doc/product/iaabu/pix/pix_sw/v_63/cmdref/gl.htm#wp1027312 for more details.
NAT - T is a standard for the encapsulation of the UDP packets inot IETF IPSec packets.
ESP IPSec (Protocol that use your encrypted data packets) is an IP Protocol, it is located just above IP, rather than being a TCP or UDP protocol. For this reason, it has no TCP/UDP port number.
A lot of features that make the translation of address of Port (PAT) rely on a single to PAT TCP/UDP source port number ' ing. Because all traffic is PAT would be at the same source address, must be certain uniqueness to each of its sessions, and most devices use the port number TCP/UDP source for this. Because IPSec doesn't have one, many features PAT fail to PAT it properly or at all, and the data transfer fails.
NAT - T is enabled on both devices of the range, they will determine during the construction of the tunnel there is a PAT/NAT device between them, and if they detect that there is, they automatically encapsulate every IPSec packets in UDP packets with a port number of 4500. Because there is now a port number, PAT devices are able to PAT it correctly and the traffic goes normally.
Hope that helps.
-
/ * Style definitions * / table. MsoNormalTable {mso-style-name : « Table Normal » ; mso-tstyle-rowband-taille : 0 ; mso-tstyle-colband-taille : 0 ; mso-style-noshow:yes ; mso-style-priorité : 99 ; mso-style-qformat:yes ; mso-style-parent : » « ;" mso-rembourrage-alt : 0 à 5.4pt 0 à 5.4pt ; mso-para-marge-top : 0 ; mso-para-marge-droit : 0 ; mso-para-marge-bas : 10.0pt ; mso-para-marge-left : 0 ; ligne-hauteur : 115 % ; mso-pagination : widow-orphelin ; police-taille : 11.0pt ; famille de police : « Calibri », « sans-serif » ; mso-ascii-font-family : Calibri ; mso-ascii-theme-font : minor-latin ; mso-fareast-font-family : « Times New Roman » ; mso-fareast-theme-font : minor-fareast ; mso-hansi-font-family : Calibri ; mso-hansi-theme-font : minor-latin ;}
Hello guys,.
I have Cisco ASA5520 facing the ISP with private IP address. We don't have a router and how to get the IPSec VPN through the internet?
The question statement not the interface pointing to ISP isn't IP address private and inside as well.
Firewall configuration:
Firewall outside interface Gi0 10.0.1.2 > ISP 10.0.1.1 with security-level 0
Firewall inside the interface Ethernet0 192.168.1.1 > LAN switch 192.168.1.2 with security-level 100
I have public IP block 199.9.9.1/28
How can I use the public IP address to create the IPSec VPN tunnel between two sites across the internet?
can I assign a public IP address on the Gig1 inside the interface with the security level of 100 and how to apply inside to carry on this interface?
If I configure > firewall inside of the item in gi1 interface ip address 199.9.9.1/28 with security-level 100. How to make a safe lane VPN through this interface on the internet?
I'm used to the public IP address allocation to the interface outside of the firewall and private inside the interface IP address.
Please help with configuration examples and advise.
Thank you
Eric
Unfortunately, you can only complete the VPN connection on the interface the VPN connection source, in your case the external interface.
3 options:
(1) connect a router in front of the ASA and assign your public ip address to the ASA outside interface.
OR /.
(2) If your ISP can perform static translation of 1 to 1, then you can always finish the VPN on the external interface and ask your provider what is the static ip address assigned to your ASA out of the IP (10.0.1.2) - this will launch the VPN of bidirectionally
OR /.
(3) If your ISP performs PAT (dynamic NAT), then you can only start the tunnel VPN on the side of the ASA and the other end of the tunnel must be configured to allow VPN LAN-to-LAN dynamics.
-
How to limit maximum SSL VPN sessions by group policy on ASA5510?
How to limit maximum SSL VPN sessions by group policy on ASA5510?
There are ideas?
There are 2-Group Policy: within a maximum of 10 connections, in the second - 15 (total licenses for SSL VPN 25 connections).
Hi Anton,.
It is an interesting question.
Please check the following options, depending on your scenario:
simultaneous VPN connections
Pour configurer configure the number of simultaneous connections allowed for a user, use the command simultaneous vpn connections in the configuration of group policy or username configuration mode. To remove the attribute from the running configuration, don't use No form of this command. This option allows inheritance of a value from another group policy. Enter 0 to disable the connection and prevent the access of the user.
simultaneous vpn connections {integer}
No vpn - connections
http://www.Cisco.com/en/us/docs/security/ASA/asa84/command/reference/uz.html#wp1664777
There is a global command, although may not be useful, I wanted to share it with you:
VPN-sessiondb max-session-limit
--> To specify the maximum limit of VPN session.
Best option:
What you can do is to create a pool of IP 10 IP addresses in one and 15 in the other, this way you let only 10 connections and 15 respectively.
IP local pool only_10 192.168.1.1 - 192.168.1.10
IP local pool only_15 192.168.2.1 - 192.168.1.15
Then,
attributes of the strategy of group only_10
the address value only_10 pools
!
attributes of the strategy of group only_20
the address value only_20 pools
-
Is it possible to limit the number of connections to the remote panel to a vi?
Hello
I have an application that runs on a PXI RT system and I use the remote control to access. My license allows me to have several remote connections and it's ok that I sometimes need to open several remote panels at the same time. However, I would like to limit the number of connections for a particular VI 1. Is this something that can be done?
Kind regards
Patrick Lessnick
The way it can be done is to interview customers who are connected to the VI through a remote façade. When you do that, you close the connection to anyone, but the first person who connected to the façade. In this way, if someone is running the VI, no one else can connect. Once they are made, someone else can then connect to the remote façade. I created an example illistrates community this behavior. You can find it here:
http://decibel.NI.com/content/docs/doc-9673
If you have any other questions, let me know.
Scott
-
Client VPN connectivity problems
I use the cisco VPN client to connect to our network, located behind a 515E. The client is authenticated and gets an ip address but cannot ping or connect with one of the hosts. The connection is to a network of customers that is also behind a 515E. I have successfully connected using the same policy to other places and have had no problem. What confuses me, is that we have used to have a Netscreen firewall before and he had a netscreen vpn client which connected since their network with a problem. Is that something they need for their firewall so that we can get through the traffic?
Try to turn on NAT - T on your pix, by setting up:
ISAKMP nat-traversal 20
and configure the client vpn accordingly:
http://www.Cisco.com/warp/public/471/cvpn_3k_nat.html#conf_client
I think these discussions are useful:
-
How to restrict the tunnel VPN Site to site traffic thrue
Hello
I have a tunnel from site to site, where Site 1 is the local site and main site. and 2 the site is the remote site.
How to limit the traffic of site 2, so that they can only reach a few IPS on the lokal site.
But since the lokal site all IP addresses must be able to reach all of the IP addresses to site 2 (remotely).
an access list to the 'inside' interface does not work, since all the acl is bypassed for the interfaces for IPSEC traffic.
Then, I tried to make a political group where I only allow traffic to servers specifik, but site 2 can still reach everything on the lokal site.
Am I missing here?
Best regards
Erik
Hi Erik,
Unfortunately, the only options that we have are VPN filters that are two-way and disabling the sysopt feature.
If you have a core switch/router we can block traffic on this device by using the access list or null routes.
See you soon,.
Nash.
-
How to limit the length of the texts on iOS9?
Hello
I just worked on why I am required by my mobile / cell phone provider EA. They charge any text as a picture message / SMS, it is longer than 120 characters? Does anyone know how to limit the length of the texts / SMS so that it is impossible to send a more 120 characters or create an alert so that you are aware of the number of characters in the text / sms?
Thank you very much
Hello Turnus123,
Thank you for using communities of Apple Support.
I see that you will have to pay for SMS more than 120 characters. To help identify messages exceeds this amount, you can activate a number of characters in the message settings. Simply go to settings > Messages and activate "number of characters".
Take care.
-
How to limit the media sharing on my computer
Original title: multimedia file sharing...
How to limit the sharing on my computer, IE multimedia: music, images and other files from other computers on the network or cell phones that are capable of DLNA?
Hello
Please check the links given and see if they help.Most of file sharing: http://windows.microsoft.com/en-US/windows-vista/File-sharing-essentials
File and printer sharing: frequently asked questions: http://windows.microsoft.com/en-US/windows-vista/File-and-printer-sharing-frequently-asked-questions
-
How to uninstall the client of microsoft winsows Vista security
How to uninstall the client of microsoft winsows Vista security
Hi PhilipCarvajal,
-Talk to Microsoft Forefront Client security or it is a client of Microsoft security essentials?
-What exactly happens when you try to uninstall? You receive an error message or error code? If Yes, indicate the same.
If you are referring to Microsoft Security Essentials, here is an article that could be useful for:
-
How to limit the email receipt/downloaded size?
I need information on how to limit the size of an email received or downloaded in Windows Mail to reduce the cost of the enamel of satellite data. Want to just send and receive, especially to receive emails with no graphics and keep it small.
Simply set up for this purpose a message rule: tools, Message rules, mail, new...Gary van, Microsoft MVP (Mail)
------------------------------------------------------"moosehuntingguy" wrote in the new message: * e-mail address is removed from the privacy... *I need information on how to limit the size of an email received or downloaded in Windows Mail to reduce the cost of the enamel of satellite data. Want to just send and receive, especially to receive emails with no graphics and keep it small.Gary van, MVP (Mail)
-
Coming out of the IPSec VPN connection behind Pix535 problem: narrowed down for NAT-Associates
Hello world
Previously, I've seen a similar thread and posted my troubles with the outbound VPN connections inside that thread:
https://supportforums.Cisco.com/message/3688980#3688980
I had the great help but unfortunatedly my problem is a little different and connection problem. Here, I summarize once again our configurations:
hostname pix535 8.0 (4)
all PC here use IP private such as 10.1.0.0/16 by dynamic NAT, we cannot initiate an OUTBOUND IPSec VPN (for example QuickVPN) at our offices, but the reverse (inbound) is very well (we have IPsec working long server /PP2P). I did a few tests of new yesterday which showed that if the PC a static NAT (mapped to a real public IP), outgoing connection VPN is fine; If the same PC has no static NAT (he hides behind the dynamic NAT firewall), outgoing VPN is a no-go (same IP to the same PC), so roughly, I have narrowed down our connection problem VPN is related to NAT, here are a few commands for NAT of our PIX:
interface GigabitEthernet0
Description to cable-modem
nameif outside
security-level 0
IP 70.169.X.X 255.255.255.0
OSPF cost 10
!
interface GigabitEthernet1
Description inside 10/16
nameif inside
security-level 100
IP 10.1.1.254 255.255.0.0
OSPF cost 10
!
!
interface Ethernet2
Vlan30 description
nameif dmz2
security-level 50
IP 30.30.30.30 255.255.255.0
OSPF cost 10
!
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface......
Global interface 10 (external)
Global (dmz2) interface 10
NAT (inside) 0-list of access inside_nat0_outbound
NAT (inside) 10 inside8 255.255.255.0
NAT (inside) 10 Vlan10 255.255.255.0
NAT (inside) 10 vlan50 255.255.255.0
NAT (inside) 10 192.168.0.0 255.255.255.0
NAT (inside) 10 192.168.1.0 255.255.255.0
NAT (inside) 10 192.168.10.0 255.255.255.0
NAT (inside) 10 pix-inside 255.255.0.0Crypto isakmp nat-traversal 3600
-------
Results of packet capture are listed here for the same PC for the same traffic to Server VPN brach, the main difference is UDP 4500 (PC with static NAT has good traffic UDP 4500, does not have the same PC with dynamic NAT):
#1: when the PC uses static NAT, it is good of outgoing VPN:
54 packets captured
1: 15:43:51.112054 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
2: 15:43:54.143028 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
3: 15:44:00.217273 10.1.1.82.1608 > 76.196.10.57.443: S 1763806634:1763806634 (0) win 64240
4: 15:44:01.724938 10.1.1.82.1609 > 76.196.10.57.60443: S 2904546955:2904546955 (0) win 64240
5: 15:44:01.784642 76.196.10.57.60443 > 10.1.1.82.1609: S 2323205974:2323205974 (0) ack 2904546956 win 5808
6: 15:44:01.784886 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323205975 win 64240
7: 15:44:01.785527 10.1.1.82.1609 > 76.196.10.57.60443: P 2904546956:2904547080 (124) ack 2323205975 win 64240
8: 15:44:01.856462 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547080 win 5808
9: 15:44:01.899596 76.196.10.57.60443 > 10.1.1.82.1609: P 2323205975:2323206638 (663) ack 2904547080 win 5808
10: 15:44:02.056897 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323206638 win 63577
11: 15:44:03.495030 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547080:2904547278 (198) ack 2323206638 win 63577
12: 15:44:03.667095 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547278 win 6432
13: 15:44:03.740592 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206638:2323206697 (59) ack 2904547278 win 6432
14: 15:44:03.741264 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547278:2904547576 (298) ack 2323206697 win 63518
15: 15:44:03.814029 76.196.10.57.60443 > 10.1.1.82.1609:. ACK 2904547576 win 7504
16: 15:44:06.989008 76.196.10.57.60443 > 10.1.1.82.1609: P 2323206697:2323207075 (378) ack 2904547576 win 7504
17: 15:44:06.990228 76.196.10.57.60443 > 10.1.1.82.1609: 2323207075:2323207075 F (0) ack 2904547576 win 7504
18: 15:44:06.990564 10.1.1.82.1609 > 76.196.10.57.60443:. ACK 2323207076 win 63140
19: 15:44:06.990656 10.1.1.82.1609 > 76.196.10.57.60443: P 2904547576:2904547613 (37) ack 2323207076 win 63140
20: 15:44:06.990854 10.1.1.82.1609 > 76.196.10.57.60443: 2904547613:2904547613 F (0) ack 2323207076 win 63140
21: 15:44:07.049359 76.196.10.57.60443 > 10.1.1.82.1609: R 2323207076:2323207076 (0) win 0
22: 15:44:17.055417 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 15:44:17.137657 76.196.10.57.500 > 10.1.1.82.500: udp 140
24: 15:44:17.161475 10.1.1.82.500 > 76.196.10.57.500: udp 224
25: 15:44:17.309066 76.196.10.57.500 > 10.1.1.82.500: udp 220
26: 15:44:17.478780 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
27: 15:44:17.550356 76.196.10.57.4500 > 10.1.1.82.4500: 64 udp
28: 15:44:17.595214 10.1.1.82.4500 > 76.196.10.57.4500: udp 304
29: 15:44:17.753470 76.196.10.57.4500 > 10.1.1.82.4500: udp 304
30: 15:44:17.763037 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
31: 15:44:17.763540 10.1.1.82.4500 > 76.196.10.57.4500: udp 56
32: 15:44:18.054516 10.1.1.82.4500 > 76.196.10.57.4500: udp 68
33: 15:44:18.124840 76.196.10.57.4500 > 10.1.1.82.4500: udp 68
34: 15:44:21.835390 10.1.1.82.4500 > 76.196.10.57.4500: udp 72
35: 15:44:21.850831 10.1.1.82.4500 > 76.196.10.57.4500: udp 80
36: 15:44:21.901183 76.196.10.57.4500 > 10.1.1.82.4500: udp 72
37: 15:44:22.063747 10.1.1.82.1610 > 76.196.10.57.60443: S 938188365:938188365 (0) win 64240
38: 15:44:22.104746 76.196.10.57.4500 > 10.1.1.82.4500: udp 80
39: 15:44:22.122277 76.196.10.57.60443 > 10.1.1.82.1610: S 1440820945:1440820945 (0) ack 938188366 win 5808
40: 15:44:22.122536 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440820946 win 64240
41: 15:44:22.123269 10.1.1.82.1610 > 76.196.10.57.60443: P 938188366:938188490 (124) ack 1440820946 win 64240
42: 15:44:22.187108 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188490 win 5808
43: 15:44:22.400675 76.196.10.57.60443 > 10.1.1.82.1610: P 1440820946:1440821609 (663) ack 938188490 win 5808
44: 15:44:22.474600 10.1.1.82.1610 > 76.196.10.57.60443: P 938188490:938188688 (198) ack 1440821609 win 63577
45: 15:44:22.533648 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938188688 win 6432
46: 15:44:22.742286 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821609:1440821668 (59) ack 938188688 win 6432
47: 15:44:22.742927 10.1.1.82.1610 > 76.196.10.57.60443: P 938188688:938189002 (314) ack 1440821668 win 63518
48: 15:44:22.802570 76.196.10.57.60443 > 10.1.1.82.1610:. ACK 938189002 win 7504
49: 15:44:25.180486 76.196.10.57.60443 > 10.1.1.82.1610: P 1440821668:1440821934 (266) ack 938189002 win 7504
50: 15:44:25.181753 76.196.10.57.60443 > 10.1.1.82.1610: 1440821934:1440821934 F (0) ack 938189002 win 7504
51: 15:44:25.181997 10.1.1.82.1610 > 76.196.10.57.60443:. ACK 1440821935 win 63252
52: 15:44:25.182134 10.1.1.82.1610 > 76.196.10.57.60443: P 938189002:938189039 (37) ack 1440821935 win 63252
53: 15:44:25.182333 10.1.1.82.1610 > 76.196.10.57.60443: 938189039:938189039 F (0) ack 1440821935 win 63252
54: 15:44:25.241869 76.196.10.57.60443 > 10.1.1.82.1610: R 1440821935:1440821935 (0) win 0#2: same PC with Dynamic NAT, VPN connection fails:
70 packets captured
1: 14:08:31.758261 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
2: 14:08:34.876907 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
3: 14:08:40.746055 10.1.1.82.1073 > 76.196.10.57.443: S 820187495:820187495 (0) win 64240
4: 14:08:42.048627 10.1.1.82.1074 > 76.196.10.57.60443: S 3309127022:3309127022 (0) win 64240
5: 14:08:42.120248 76.196.10.57.60443 > 10.1.1.82.1074: S 1715577781:1715577781 (0) ack 3309127023 win 5808
6: 14:08:42.120568 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715577782 win 64240
7: 14:08:42.121102 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127023:3309127147 (124) ack 1715577782 win 64240
8: 14:08:42.183553 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127147 win 5808
9: 14:08:42.232867 76.196.10.57.60443 > 10.1.1.82.1074: P 1715577782:1715578445 (663) ack 3309127147 win 5808
10: 14:08:42.405145 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578445 win 63577
11: 14:08:43.791340 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127147:3309127345 (198) ack 1715578445 win 63577
12: 14:08:43.850450 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127345 win 6432
13: 14:08:44.028196 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578445:1715578504 (59) ack 3309127345 win 6432
14: 14:08:44.058544 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127345:3309127643 (298) ack 1715578504 win 63518
15: 14:08:44.116403 76.196.10.57.60443 > 10.1.1.82.1074:. ACK 3309127643 win 7504
16: 14:08:47.384654 76.196.10.57.60443 > 10.1.1.82.1074: P 1715578504:1715578882 (378) ack 3309127643 win 7504
17: 14:08:47.385417 76.196.10.57.60443 > 10.1.1.82.1074: 1715578882:1715578882 F (0) ack 3309127643 win 7504
18: 14:08:47.394068 10.1.1.82.1074 > 76.196.10.57.60443:. ACK 1715578883 win 63140
19: 14:08:47.394922 10.1.1.82.1074 > 76.196.10.57.60443: P 3309127643:3309127680 (37) ack 1715578883 win 63140
20: 14:08:47.395151 10.1.1.82.1074 > 76.196.10.57.60443: 3309127680:3309127680 F (0) ack 1715578883 win 63140
21: 14:08:47.457633 76.196.10.57.60443 > 10.1.1.82.1074: R 1715578883:1715578883 (0) win 0
22: 14:08:57.258073 10.1.1.82.500 > 76.196.10.57.500: udp 276
23: 14:08:57.336255 76.196.10.57.500 > 10.1.1.82.500: udp 40
24: 14:08:58.334211 10.1.1.82.500 > 76.196.10.57.500: udp 276
25: 14:08:58.412850 76.196.10.57.500 > 10.1.1.82.500: udp 40
26: 14:09:00.333311 10.1.1.82.500 > 76.196.10.57.500: udp 276
27: 14:09:00.410730 76.196.10.57.500 > 10.1.1.82.500: udp 40
28: 14:09:02.412561 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
29: 14:09:04.349164 10.1.1.82.500 > 76.196.10.57.500: udp 276
30: 14:09:04.431648 76.196.10.57.500 > 10.1.1.82.500: udp 40
31: 14:09:05.442710 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
32: 14:09:11.380427 10.1.1.82.1075 > 76.196.10.57.443: S 968016865:968016865 (0) win 64240
33: 14:09:12.349926 10.1.1.82.500 > 76.196.10.57.500: udp 276
34: 14:09:12.421502 10.1.1.82.1076 > 76.196.10.57.60443: S 3856215672:3856215672 (0) win 64240
35: 14:09:12.430794 76.196.10.57.500 > 10.1.1.82.500: udp 40
36: 14:09:12.481832 76.196.10.57.60443 > 10.1.1.82.1076: S 248909856:248909856 (0) ack 3856215673 win 5808
37: 14:09:12.527972 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248909857 win 64240
38: 14:09:12.529238 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215673:3856215797 (124) ack 248909857 win 64240
39: 14:09:12.608275 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215797 win 5808
40: 14:09:12.658581 76.196.10.57.60443 > 10.1.1.82.1076: P 248909857:248910520 (663) ack 3856215797 win 5808
41: 14:09:12.664531 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215797:3856215995 (198) ack 248910520 win 63577
42: 14:09:12.725533 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856215995 win 6432
43: 14:09:12.880813 76.196.10.57.60443 > 10.1.1.82.1076: P 248910520:248910579 (59) ack 3856215995 win 6432
44: 14:09:12.892272 10.1.1.82.1076 > 76.196.10.57.60443: P 3856215995:3856216293 (298) ack 248910579 win 63518
45: 14:09:12.953029 76.196.10.57.60443 > 10.1.1.82.1076:. ACK 3856216293 win 7504
46: 14:09:12.955043 76.196.10.57.60443 > 10.1.1.82.1076: 248910579:248910579 F (0) ack 3856216293 win 7504
47: 14:09:12.955242 10.1.1.82.1076 > 76.196.10.57.60443:. ACK 248910580 win 63518
48: 14:09:12.955516 10.1.1.82.1076 > 76.196.10.57.60443: P 3856216293:3856216330 (37) ack 248910580 win 63518
49: 14:09:12.955730 10.1.1.82.1076 > 76.196.10.57.60443: 3856216330:3856216330 F (0) ack 248910580 win 63518
50: 14:09:13.019743 76.196.10.57.60443 > 10.1.1.82.1076: R 248910580:248910580 (0) win 0
51: 14:09:16.068691 10.1.1.82.500 > 76.196.10.57.500: udp 56
52: 14:09:16.227588 10.1.1.82.1077 > 76.196.10.57.60443: S 3657181617:3657181617 (0) win 64240
53: 14:09:16.283783 76.196.10.57.60443 > 10.1.1.82.1077: S 908773751:908773751 (0) ack 3657181618 win 5808
54: 14:09:16.306823 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908773752 win 64240
55: 14:09:16.307692 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181618:3657181742 (124) ack 908773752 win 64240
56: 14:09:16.370998 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181742 win 5808
57: 14:09:16.411935 76.196.10.57.60443 > 10.1.1.82.1077: P 908773752:908774415 (663) ack 3657181742 win 5808
58: 14:09:16.417870 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181742:3657181940 (198) ack 908774415 win 63577
59: 14:09:16.509388 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657181940 win 6432
60: 14:09:16.708413 76.196.10.57.60443 > 10.1.1.82.1077: P 908774415:908774474 (59) ack 3657181940 win 6432
61: 14:09:16.887100 10.1.1.82.1077 > 76.196.10.57.60443: P 3657181940:3657182254 (314) ack 908774474 win 63518
62: 14:09:16.948193 76.196.10.57.60443 > 10.1.1.82.1077:. ACK 3657182254 win 7504
63: 14:09:19.698465 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
64: 14:09:19.699426 76.196.10.57.60443 > 10.1.1.82.1077: 908774740:908774740 F (0) ack 3657182254 win 7504
65: 14:09:20.060162 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
66: 14:09:20.062191 76.196.10.57.60443 > 10.1.1.82.1077: P 908774474:908774740 (266) ack 3657182254 win 7504
67: 14:09:20.063732 10.1.1.82.1077 > 76.196.10.57.60443:. ACK 908774741 win 63252
68: 14:09:20.063900 10.1.1.82.1077 > 76.196.10.57.60443: P 3657182254:3657182291 (37) ack 908774741 win 63252
69: 14:09:20.064098 10.1.1.82.1077 > 76.196.10.57.60443: 3657182291:3657182291 F (0) ack 908774741 win 63252
70: 14:09:20.127694 76.196.10.57.60443 > 10.1.1.82.1077: R 908774741:908774741 (0) win 0
70 packages shownWe had this problem of connection VPN IPsec from the years (I first thought it is restriction access problem, but it does not work or if I disable all access lists, experience of yesterday for the same restriction of the access-list shows longer than PC is not the cause). All suggestions and tips are greatly appreciated.
Sean
Hi Sean, please remove th lines highlighted in your pix and try and let me know, that these lines are not the default configuration of the PIX.
VPN-udp-class of the class-map
corresponds to the list of access vpn-udp-acl
vpn-udp-policy policy-map
VPN-udp-class
inspect the amp-ipsec
type of policy-card inspect dns migrated_dns_map_1
parameters
message-length maximum 768
Policy-map global_policy
class inspection_default
inspect the migrated_dns_map_1 dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the http
inspect the netbios
inspect the rsh
inspect the rtsp
inspect the skinny
inspect sqlnet
inspect sunrpc
inspect the tftp
inspect the sip
inspect xdmcp
inspect the pptp
inspect the amp-ipsec
permit same-security-traffic inter-interface
permit same-security-traffic intra-interface
IP verify reverse path to the outside interface
Thank you
Rizwan James
Maybe you are looking for
-
I bought a Satellite A300D PSAH8A 01K00H of a site affiliated with ebay.The laptop had some problems of virtual memory, but has not been slow etc.What is the maximum ram that can hold my laptop? don't know what other information is needed but will st
-
About 2oz of coffee clattered out my cup of coffee and on the keyboard and the touchpad. I turned off the machine, removed the battery and used a can of compressed air to get as much liquid out of the machine as possible. I intend 24 to 48 hours of w
-
Music files occur on player m250.
Hello me once again. I posted a question not too long ago and got a great response and help on here, I'm hoping to get help from you again today! I downloaded a few songs on itunes earlier, as I always do, tried putting them on my sansa m250 - everyt
-
Strange slowdown in performance, many errors in scannow
Hello! A few days ago, my PC started to slow down. The slowdown is not terrible, but it's enough to disturb my work flow. I think that it started after I updated to Windows. Since then a more update is available, but I don't the have not installed. s
-
Hello People of Cisco told me C - 220M 3 a compulsory bring a RAID inside controller if you are configuring a HARD drive... in fact dynamic Configuration tool will not let me set up a server of C220M3 with a HARD drive if I do not add a RAID controll