How to load different virtual machines with different network users?

Similar Questions

• How to create a virtual machine with apps to play in VMware player?

  I know that this question was probably asked several times before. I searched for the answer and just shot to the top of threads that have a few years. I know a few things have changed since then and I didn't know how that would influence the answers. I want to create a virtual machine with specific applications that will play on VMware player. What is the best way to do it and it is possible for the weak or no cost? If someone knows a tutorial or blog etc I can follow that would be great.  Thank you

  See the article by Alessandro on that... http://www.virtualization.info/2005/12/Guide-to-create-VMX-files-for-VMware.html

• How to clone a virtual machine with the drive?

  Hello

  Previously, I used VMware Workstation and has a mastery of "clone". Now I use the reader and I would like to clone my current VM and there is no special orders. Simply copy the directory would probably not there a lot of information such as DNS name, etc. that are likely to be changed. Is it possible to clone a virtual machine with player or do I Workstation?

  Many thanks in advance,

  Nicolas

  In my computer a full clone is nothing more then is not a copy that was made unique in the process and the players of VMware capacity but there is nothing stopping you from manually making a copy and then manually by making the changes to make it unique.

• Help to get a list of virtual machines with switch network and name

  I'm trying to get a simple list of virtual machines on a single host and include their name and networkname.

  When I run this Get - vm | where {$_.} $host.name - eq "ESX.local"}, I get the virtual machines with their name.  When I run this Get-networkadapter - vm Get - vm | where {$_.} $host.name - eq "ESX.local"} I download news network with the name of the network, which is what im after. "  I want to combine these 2 commands and get vm name and network name in a csv.  The network name is the Group of ports, the VM is affected change settings for example, it could be vlan10 or what you named your group of ports in the switch DV.  I've attached a screenshot of the orders successfully.

  Hello, brisketx-

  You could do a little more efficiently by getting first the VMHost (s) that are of interest, then get their virtual machines and then using a computed property for the names of network for virtual machines.  As:

  Get-VMHost esx.local | Get-VM |    Select-Object Name, @{n="NetworkName"; e={(Get-NetworkAdapter -VM $_ | %{$_.NetworkName}) -join ","}}
  

  You can then, of course, lead to Export-Csv to write the data to a CSV file.  How does do for you?

• Create multiple virtual machines with 2 network cards

  Hey guys -.

  Been researching some scripts of difference but did not find one who will help me in my situation.

  I'm looking for a script that will allow me to clone model and apply network settings to 2 network cards.

  1 clone Vms + 20 model

  2 Let me send it to a particular lun (using a few LUNS to available)

  3. choose a custom unique specification

  4. apply intellectual property on 2 NICs (primary and backup).

  Any help would be sincerely appreciated.

  Thank you

  Sorry to lose this thread out of my sight.

  What follows is an attempt to meet all the conditions you listed.

  $numberOfVM = 20$baseVMName = "VM"$templateName = "Template"$osCustName = "MyCust"$IPBase1 = "192.168.1."$IPBase2 = "192.168.2."$IPMask = "255.255.255.0"$IPGate1 = "192.168.1.254"$IPGate2 = "192.168.2.254"$IPDns1 = "192.168.1.100"$IPDns2 = "192.168.2.100"
  
  # Target resourcepool$resPool = Get-ResourcePool -Name Resources
  
  # Get the template$template = Get-Template -Name $templateName
  
  # Create a copy of the OS Customisation SpecTry {    Get-OSCustomizationSpec -Name tempOSCust |    Remove-OSCustomizationSpec -Confirm:$false -ErrorAction Stop}Catch {}
  
  $osCust = Get-OSCustomizationSpec -Name $osCustName |     New-OSCustomizationSpec -Name tempOSCust -Type NonPersistent
  
  # Clone the number of requested VM1..$numberOfVm | %{    # Find the datastore with the most free space    $ds = Get-Datastore | Sort-Object -Property FreeSpaceGB -Descending |        Select -First 1
  
      # Update the OS Customisation Spec NIC parts with the IP addresses    Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 1 -IpMode UseStaticIP -IpAddress "$IPBase1$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate1 -Dns $IPDns1 -ErrorAction SilentlyContinue | Out-Null
  
      Get-OSCustomizationNicMapping -OSCustomizationSpec $osCust |    Set-OSCustomizationNicMapping -Position 2 -IpMode UseStaticIP -IpAddress "$IPBase2$_" `        -SubnetMask $IPMask -DefaultGateway $IPGate2 -Dns $IPDns2 -ErrorAction SilentlyContinue | Out-Null
  
      # Create the new VM    New-VM -Name "$baseVMName$_" -Template $template -OSCustomizationSpec $osCust `        -Datastore $ds -ResourcePool $resPool  | Out-Null}
  

  The script will create clones of $numberOfVM of the model. The virtual machines will be created at the root of the bunch, and they will be called VM1, VM2...

  The OSCustomizationSpec needs to exist and must have 2 network cards.

  The script finds the data store with more free space to create each virtual computer.

  Addresses IP of NIC are consecutive, for example on NIC1 you get 192.168.1.1, 192.168.1.2... and so on.

  Let me know if you have any questions.

• How to create a new virtual machine with two warehouses of data through new-vm?

  Hi guys,.

  Can you please help or direct me to the right format? I'm new with vsphere powercli.

  How to create a virtual machine with two other data store by using the new-vm?

  $datastore1 = get-datastore. WHERE-object {$_.} Name - eq "lun1"}

  $datastore2 = get-datastore. WHERE-object {$_.} Name - eq "lun2"}

  new-vm-name vmtest01 - VMHost ESXserver - datastore $datastore1 diskmb - 8192 $datastore2 diskmb - 8192 - memorymb 4096 - numcpu 2 - ID winNetStandardGuest

  I got this error when I run vsphere powercli. I appreciate if you can help. Thank you

  New-VM: cannot bind parameter 'DiskMB '. Cannot convert the 'lun2"val

  EU to type 'VMware.VimAutomation.ViCore.Impl.V1.DatastoreManagement.DatastoreIm '.

  PL"type"System.Int64 ".

  At line: 1 char: 85

  + new-vm-name vmtest01 - VMHost ESXserver - $datastore1 data store

  diskmb - < < < < 8192, $datastore2 - diskmb 8192

  + CategoryInfo: InvalidArgument: ( , ParameterBindingE)

  Xception

  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomat

  ion.ViCore.Cmdlets.Commands.NewVM

  Bryan

  The New-VM cmdlet takes a single value of the parameter - data store and all of the virtual disks will be located on this data store.

  If I understand your request, you create a virtual machine with 2 virtual disks, each on a different data store.

  You can use the cmdlet New - hard drive for it.

  $datastore1 = get-datastore | where-object {$_.Name -eq "lun1"}
  $datastore2 = get-datastore | where-object {$_.Name -eq "lun2"}
  
  $vm = new-vm -name vmtest01 -VMHost ESXserver -datastore $datastore1 -diskmb 8192 -memorymb 4096 -numcpu 2 -GuestId winNetStandardGuest
  new-harddisk -vm $vm -datastore $datastore2 CapacityKB (8192 * 1KB)
  

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Commissioning a virtual machine with vCAC

  I'm embarrassed to have to ask the question, but here goes.

  How to configure a virtual machine with vCAC?

  I have install the application.  Created the plan of action.  Has created the service.  Created the Group of companies.  Create the law.  Has created the catalog item.

  As far as I can tell, I did everything what to do to allow a computer virtual be put into service, but I can't find where in the application to access the catalog and run provisioning.

  Would be the logical place to do https://FQDN to vcac/shell-ui-app/org / < tenant > logged in as a standard user who is a member of the Business Group with access to appropriate and rights catalog items to the.

  What Miss me?  I'm sure that the answer is right in front of my face, but I can't.

  If you are a member of the right to the service and a member of the Group of companies, you should have a catalog tab when you log in. All the plans that you access it will be...

• How to access the virtual machines to different physical network?

  Hello

  I'm new to ESXi, can someone tell me how can I access virtual machines on the physical network existing in case I use different IP classes? Physics of the network by using the class C IPs and I assigned IPs to virtual machines of class A? If it is possible, then, what are the steps?

  In fact, I installed exchange 2010 VMs and also want to access the email accounts of physical network.

  Thank you.

  vmjunki wrote:

  You mean there's no way in ESXi to configure the way so we can access the virtual machines to physical network? without third-party applications.

  Because it is impossible for the various networks IP connect without a router, you must have such a device. There is really no difference in that in a pure virtual or physical environment.

  You might think the ESXi host as a box with one or more servers (virtual) inside and one or more layer (virtual) two switches, just like a small server room. This means you will need to provide the same type of connectivity that you would have to a new server room with machines configured with addresses in a different IP network range.

• Photos of virtual machines with multiple disks on different LUNS - Question

  I have some questions on how to manage the snapshots of virtual machines with multiple disks on different LUNS.  First of all, the LUNS are VMFS.  We are just starting to add virtual machines with dedicated for data storage format VMFS LUNS.  I don't think an extra space must be made for snapshots, as well as at least 100 GB LUN is required to store the data, and then say, add about 25 to 50% of this amount?  Set the 100 GB vmdk file but have the GB from 25 to 50 additional disk space for snapshots, if necessary (rather than just to get a unit number logic needed 100 GB of data and devote all of the 100 GB to the vmdk file).  In addition, if a virtual machine has several files vmdk on different LUNS, which will be a problem to take a snapshot, and is it possible to do just a snapshot of a disk of a virtual computer (as the volume of the BONE)?

  Thanks for any help.

  Snapshot files are created in the home folder of the VM by default for all virtual disks, no matter on what data store they are. You must make sure you have enough free disk space on the data store for snapshots.

  If you want to exclude a virtual disks of taking snapshots, you can set it to 'Independent' - 'Persistent' machine virtual settings to the HARD drive.

  André

• Let me know scenarios when different virtual machines with the same UUID are created in VMware Hypervisors?

  Let me know scenarios when different virtual machines with the same UUID created in VMware Hypervisors, aside from editing the .vmx file?

  The only other way I've seen is when you manually copy the virtual machine to another location on the data store (or another data store) and then when turn on/off the virtual machine, select I moved, rather that I copied it (the default option).  This will keep the same UUID.

• How can I get the version of VMware to virtual machines with powercli officer?

  How can I get the version of VMware View Agent running on a virtual machine with powercli or view Powercli?

  As much as I know there is no cmdlet PowerCLI for this, but you can use the Invoke-VMScript cmdlet and interrogate the Win32_Product class.

  By running the following. You can add a Where clause to return only the Agent of the view

  Get-WmiObject-class Win32_Product | Select the name, Version

• Virtual machine with Redhat - how to extend the file system

  I have a virtual machine with redhat.  the machine was created with 20 GB of space.  I changed the settings and gave him 30GB.

  / Dev/sda watch now 30 GB

  But/dev/map/VolGroup00/LogVol00 shows that the 20 GB.

  How can I get the file system to extend with the other 10 GB of space?

  Thank you!

  Mackman wrote:

  How can I get the file system to extend with the other 10 GB of space?

  With a lot of attention.    I just went through something similar myself.  This web site has been very useful: http://www.linuxnetadmin.com/2008/01/how-to-add-disk-space-with-lvm-on-linux.html

  The website above describe the steps when adding an additional drive, but the steps for extending on a new partition on the same disk should be similar.

  Take a snapshot first in case things go very wrong.

• How to export/import a virtual machine with ESXi 5

  I use the free version of ESXi 5 and have created a virtual machine that is configured with the software for our project. I would like to share this virtual machine with other members of the team, some of whom are in other places and have slow network connections.  I want to pack the VM in a reasonable size file or a set of files I could ftp (or put it on DVD for people in areas of slow network) that they could then import into their ESXi hosts. The virtual machine has a 60 GB drive that is implemented by using the option 'thin', so it contains only 6 or 7 GB of real data right now.  Is it possible to export the image to a file or set of files that can be imported to another people ESXI host?  Before when I used VM Player we could do this by upgrading backup files in virtual machine directory and copy them to the new machine. With the ESXi data store, I don't know that something like this can be done.  I used vCenter Converter to convert to ESXi Infrastructure VM in VM Player format (and vice versa), but it is extremely slow. I think I might point the Source to my ESXi host and the Destination to a co-workers ESXi host and run a 'conversion' to transfer the files, but I think it would be very slow and impractical for some people to 'slow-network '.  I tried with vSphere Client navigation data store and I see the download options, but when I tried to download a VM directory it just hung.  I enabled ssh on my server ESXi and I found the store of data under/vmfs/volumes and when I look in the folder that contains my VM, there a file myvmname - flat hard which is 60 GB in size, so if I tar the contents of this folder to move elsewhere it will be huge.

  Can anyone suggest a solution?  The licensed version of ESXi would offer better alternatives?

  You can watch export OVF available in the Client vSphere for this function.

• How to make the virtual machine in 64-bit with VMware6.5

  My CPU: AMD Turion 64 * 2

  Operating system: Windows xp 32

  Question:

  I want to run Open solaris 2008 which is 64 bit, I did a virtual machine but it is 32-bit. You tell me how to make the virtual machine in 64 bits in VMware6.5, I really appreciate.

  Yes.  Power off the virtual computer.  Change the settings.  Change the guest OS to Solaris 10 to Solaris 10 64-bit.

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Cloning a virtual machine with 2 hard drives!

  Hi all!

  I ran into a very annoying problem. I'm trying to Migrate/convert virtual machines to a host in the CR. Each virtual machine has 2 hard drives which are located on 2 different data stores. When I try to migrate or to clone virtual machines from the host on my Cluster I get an 'error of operation period.

  After scratching my head for a while, I discovered why. The virtual machine have 2 hard drives on 2 different data stores. Both flat.vmdk files are called eponymous because they are on different data warehouses (TTDC001.vmdk). I created a VM test on the cluster with 2 hard drives and flat.vmdk flies are named TTDC001.vmdk and TTDC001_1.vmdk.

  So my conclusion as to why I get "Opération Timeout Error" is that VC trying Migrate/Clone to the virtual machine but is mistake because his attempts to migrate/Clone 2 hard files with the same name!

  Can someone give me some pointers as to how I can get around this? I am currently copy the file hard 2nd to my deskop from the data store and rename it then copy him on the new cluster data store to see if it works as you cannot rename the file hard in the data store. It just seems long way round to migrate virtual machines with 2 hard drives, and I don't even know if it works!

  Please help!  :|

  Andy Hughes

  Andy of the evening,

  I do it well. Thank you for asking.

  So if I'm reading correctly it seems that you are trying to clone a virtual machine from a stand-alone host to a host that is part of a VMware Cluster. When you do this you get a network midway through the copy error. Is this correct?

  Can you confirm how fast is connected to the Service Console between the two servers? For this kind of work I would recommend making them run at 1000/full, assuming you're not already. Could you also post the entire message that you get when the clone fails.

  Kind regards

  Glen