How to access the virtual machines to different physical network?

Similar Questions

• How to move the virtual machine from one cluster to another cluster

  How to move the virtual machine from one cluster to another cluster

  If two Clusters are in the same data center, you could do a 'live' migration or vMotion, if that's the case.   If the virtual machine is turned off, it may be migrated regardless of the data center.

• is it possible to access the virtual machine when the network is down...

  Hello. He... IAM wondering is it possible that we can access the virtual machine when the network is down... (Because of power outages or when the fluctuations...) ................?

  Is it possible that I can configure my Virtual Machine...?

  Thank you and best regards...

  Indianmale...

  Hello

  Not really...

  For an environment hosted... If you can access the console of the host, you can always access the console of the virtual machine regardless of the State of the network outside of the console. VMware Workstation, Fusion and server all fall into this category.

  For ESXi/ESX... you need a host outside to access the console of the virtual machine. ESX and ESXi not displayed graphics or VMs of their consoles and management devices. So, you need an external machine that can run the vSphere Client or access to the virtual machine via RDP, VNC according to Guest OS involved or SSH.

  Best regards
  Edward L. Haletky
  VMware communities user moderator, VMware vExpert 2009, Analyst of DABCC
  ====
  Author of the books ' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' available for pre-order now
  "VMWare ESX in the Enterprise Server: planning and securing virtualization servers, Copyright 2008 Pearson Education."
  SearchVMware Pro| Blue gears. Top virtualization security links| Security Round Table Podcast virtualization

• How to make the virtual machine in 64-bit with VMware6.5

  My CPU: AMD Turion 64 * 2

  Operating system: Windows xp 32

  Question:

  I want to run Open solaris 2008 which is 64 bit, I did a virtual machine but it is 32-bit. You tell me how to make the virtual machine in 64 bits in VMware6.5, I really appreciate.

  Yes.  Power off the virtual computer.  Change the settings.  Change the guest OS to Solaris 10 to Solaris 10 64-bit.

• VMware networking help - network bridge / to access the virtual machines form other pc

  I have a computer 'server' that had 4 VM launched on it.

  I need to connect to these virtual machines, all of which have their own IP addresses. I can ping the server or the host of a remote computer, but must be able to communicate with the virtual machines in the remote/client computerss.

  Can anyone offer insight?  I tried to set up an automatic bypass at one of the virtual machines

  Any thoughts?

  Sorry, I'm not sure I can follow you. In any case, what you're trying to do is to configure adaper network of the virtual machine as "Bridged" within the parameters of the virtual machine and then change network card settings in as guest OS:

  IP address: 192.168.1.21 (where 21 must be an unused IP address currently)
  Subnet mask: 255.255.255.0
  Def gateway: 192.168.1.1

  Preferred DNS server: 192.168.1.1

  André

• How to move the Virtual Machine VMWare Workstation 10 to a completely different computer

  I have a laptop that is going to become my 'old' laptop, I bought and am always set up a new computer.

  I have a VM THAT evolution created on the 'old' portable using VMWare Workstation 10.  I installed the software VMWare Workstation 10 on the new laptop computer and am ready to move to the existing VM development since the old laptop again to continue the development of software on the virtual machine to the new machine.

  I never moved a computer virtual from one computer to another, and I guess that all I have to do is to copy and move the folder and all its content from the old laptop to the new, and then I'll be back in business?

  Just make sure it is this simple before doing so.

  Thanks for any input.

  It's as simple as that. When you start in the new machine, it should ask if you copied or moved. Answer that you moved it will keep the same MAC address and you will not be able to connect the two copies at the same time. You copied it saying assigns a new MAC and they both can connect, but a Windows machine can ask to reactivate. Seems to me he asked also to reactivate when I copied it for an Intel system AMD system, but it was a long time ago

  Lou

• To access the virtual machines of two different hosts

  Greetings,

  I have a question that I can't find the answer to. I am setting up a virtual machine environment small and need to better understand the architecture behind it.

  2 host servers

  1 iSCSI Equallogic San (target)

  I have installed 35i ESX and runnning on two physical hosts. .205 et.206

  I created a data store on my SAN to host my 'model' VM.

  De.205, I can see the data on the SAN network store and browse the virtual machine I (using VMConverter) moved there.

  De.206, I can see the data store on the SAN, but when I sail, I do not see the same information. I see no. VM.

  MY understanding is that using the SAN to store the virtual machine and that I would make the hosts of this data store to run the virtual machine. But the way in which it seems that I have the virtual machine configured on both hosts, always pointing the data store on the San but again using converter, copy de.205 vers.206.

  What don't understand me or that I don't understand.

  Your help is appreciated.

  Welcome to the VMware community forums.   If you have configured things Ok, you will be able to browse the data from these two hosts store and see the same content.  You can register the virtual computers on both hosts.  For an existing VM on the host from 1, you find the data on the host of the 2nd store, right-click on the VMX file and select Add to the inventory.  Have you thought to vcenter server?  It's going to do it is a lot easier.

• How to install the virtual machine to ISO image

  Rather than burning a CD from ISO images downloaded from each OS you want to build a virtual machine it would be more convenient to use the ISO image directly. How can I achieve this?

  Create the virtual computer with CD player.

  Double click the CD drive in the virtual machine properties.

  Select USE AN ISO IMAGE

  Navigate to the image.

  and also you can refer to this link

  VMware Workstation 12 Pro Documentation Center

  you're installation uses several CDs pleae follow this procedure

  First duty (if the customer has a button for this) eject the CD in the comments, then ctrl-alt to focus the host, right click on the CD icon in the bar area of low right state of the workstation user interface and select disconnect; repeat, and then click edit. Select the image ISO next necessary; reconnect; then click the mouse back in the window of the customer and to know that the next CD is loaded.

• No network connection between the virtual machines on different hosts ESXi

  I have several 5.0 ESXi hosts in a cluster managed by vCenter Server 5 and I have network problems:

  1. [Host A] running a virtual machine can ping any other computer virtual running on the [host A] great!
  2. A virtual machine running on host [B] can ping any other virtual machine running on [B] home - very well!
  3. [host A] (from the ESXi console) can ping any virtual machine running on [B] home - even better!
  4. [B] home (from the ESXi console) can ping any virtual machine running [host A] - beautiful set!
  5. A virtual machine running [host A] can not ping any virtual computer running on host [B] and vice versa - bad, very bad!

  So basically the problem is that the virtual machines can communicate on hosts. It is a major problem that I need to fix, for obvious reasons.

  Networking on all hosts is configured exactly the same way: a unique and standard vSwitch with a pair of gigabit network cards grouped, vmkernels configured for the vMotion, NFS and network management and a group of ports configured for the VIRTUAL local area network used by the VMs. (vMotion works fine on hosts, storage vMotion works very well too.) All virtual machines are servers Windows (2003 and 2008).

  Reason #3 and #4 above, my assumption is that #5 must be the result of an ESXi/vCenter configuration issue and not a problem with the switches of material upstream. Is this a reasonable assumption?

  Whatever it is, can anyone offer suggestions on how can I fix? It is quite annoying as I'm pretty sure that these hosts are configured in the same manner as those of our production cluster, which does not at all these problems!

  Thanks in advance for any help you guys can provide.

  To be honest, it looks like a problem with your physical network-

  How is the physical network configured - are NIC connects it to the same physical switches? Are the virtual machines on the same subnet? If this is not the case, they are able to ping the gateway sbnet? Can you piing host IP address from the virtual machines?

  I also moved it to a forum more approiate.

• How to move the virtual machine from one host to another?

  The two boxes under ESXi 5.0 (hypervisors freely licensed).

  I have a virtual machine (FreeBSD) that I need to go to another box.

  Network ports are not the same, but I guess that's not a biggie to reconfigure the network cards. Other than that, I have to follow a few best practices/SOPS or copy & paste is everything I need to run perfectly on a different host?

  Thank you very much!

  FastSCP allows you to copy directly between hosts, so it can save a lot of time you copy.  I don't know what you mean by 'manually' copy files.  Do you mean using the vShpere client and download the files to a location then download them to the new host?  Either way works perfectly, but FastSCP you must save a step.

  If you have currently snapshots, you can consolidate first or leave em and just copy them with the rest of the virtual machine. There should be no need to do something with snapshots, if you perform a migration 'offline '.  As long as you take all the files, snapshots will be displayed on the destination host computer when you save the vm on the host.

  I did 'on-line' migration of large virtual machines first to the take a snapshot on the source host, copy basic to the first destination host disks while the virtual machine was still running on the source host.  When I was ready to migrate the CPU processing, I power off the virtual machine, copy the other files (which would include the deltas from disk and whatnot) and turn on the vm on the destination host (which would cause only a few minutes of downtime).  Later, I consolidate records by removing the snapshot on the destination host.  Way to a poor man to do a migration of vm on ESXi free edition with little downtime.

• Question about how to include the virtual machine output

  Currently, using this command:

  Get - vm | Get-networkadapter | ForEach-Object {Write-Host $_.} The name', ' {$_.macaddress} '.

  Gives me this result:

  NIC 1, 00:50:56:bc:00:1 c

  NIC 1, 00:50:56:bc:00:28

  I'm interested also in writing the name of real virtual machine as well.

  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:1 c
  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:28

  Don't know how to work out of virtual machine name as 'Name' asks also the network card information.

  Try it like this

  $report = foreach($vm in (Get-VM | where {$_.PowerState -eq "PoweredOn" -and $_.Version -eq "v7"})){
      Get-NetworkAdapter -VM $vm  | `    Select @{N="VMname";E={$vm.Name}},
           @{N="MAC address";E={$_.MacAddress}}
  }
  
  $report | Export-Csv ".\test.csv" -NoTypeInformation -UseCulture
  

• [Beginner] How to change the virtual machine name

  Hello

  How can I change the name of a Virtual Machine - I want to say the name that appears in VMPlayer (or VMWare Fusion) as it has recently used Virtual Machines. I tried to change the name of the vmx file but this does not affect the name of the virtual machine displayed in VMPlayer.

  Thank you very much.

  TomasBar wrote:

  How can I change the name of a Virtual Machine - I want to say the name that appears in VMPlayer (or VMWare Fusion) as it has recently used Virtual Machines.

  VMware Fusion 3.x and 2.x but not 1.x, you can click on and change the name of the virtual machine in the Virtual Machine library on the right side, just under the display area.

  For VMware Player you need to edit the "displayName ="parameter in the configuration file .vmx and of VMware Player virtual machine must be closed when you perform this operation."

• How to install the virtual machine tools

  I am new to this, and it's fun to find how to do everything. I'm stuck now, so need some help, I did search but could not find definitive answers.

  I have ESXi installation, it will run on a dedicated slide. I have a windows-based virtual machine that I use to test.

  I downloaded the iso of VM Tools for Linux to install on the server so that I can push to the client virtual machines. I can't understand how to install the VM on the server tools so that I have the option in the console to push to turn the VM to the client tools.

  Is there something I'm completely missing? The iso is for linux, which is the server. I assumed it would be installed on the server that would allow me to push to windows clients.

  Help, please!

  VMware tools for Windows is already included in the installation of ESX.

  Customer Infrastructure using, go to the console of the virtual Windows computer and logon. Right-click of the virtual machine in the inventory on the left, then select "install/upgrade VMware tools. If Autorun is enabled the installation starts automatically, if not the Windows.iso is loaded into the virtual computer CD-ROM drive and you have to run setup.exe.

  André

• How to create the virtual machine to a virtual machine existed file?

  I have two hard drives on my VMware host. There are virtual machines on a SATA drive, how do I list these files of virtual machines and copy one of them to create a new virtual machine (it can save a lot of my time!). I did this way on VMware server 2.0 because I can see what they were and where they were under Windows. But on vSphere, how can I do? Maybe you guys have other ways to do it?

  Thank you!

  George

  On vSphere, I suggest you use autonomous vConventer instead. It is quite simple and easy to use. Alternatively, you can copy or clone the virtual disk to the virtual machine via the Console (ESX) Service offline

  vcbMC - 1.0.6 Beta

  Lite vcbMC - 1.0.7

  http://www.no-x.org

• How to find the virtual machine connected to a partical card RAW LUN.

  Hello

  I love RAW map of LUN that I connected to several virtual machines on different hosts.

  Its been a very long time. Now, I don't remember which VM is connected to the LUN of my RAW card.

  I have a lot number of VM on each HOST so that it will take enormous time to search manually.

  Is anyway find VM connected to my RAW LUN map.

  Thanks in advance,

  Isabelle

  Hello.

  RVTools will work.  Look under the tab vDisk path information.

  Good luck!