How to load the resource network when running

Similar Questions

• Edit the Resource Bundles when running

  Hi all

  I use JDeveloper 11.1.2.4.0, I created a model project and resource bundle option a Bundle by file then I set the label in the Councils of the user interface for each attribute of the Entity object.

  My client wants to be able to change the feature across the screen attribute labels.

  is it possible to edit the Resource Bundles when running?

  Kind regards

  See if this series of blog posts can help you: https://technology.amis.nl/2012/08/15/live-update-of-resource-bundle-from-within-running-adf-application/

  Dario

• How to load the opencard.properties when you use OpenCardFramework as a Jar?

  Hello
  
  I use the OpenCardFramework as a plug-in in eclipse project, when the other project to use, the opencard.properties is not found.
  So I put the opencard.properties file in the [java.home]/lib/opencard.properties folder, it works.]
  
  But I want to put opencard.properties file in another project, then how to load the file.
  
  Thanks in advance!

  CardTerminals.waitForChange
  CardTerminal.waitForCardPresent
  CardTerminal.waitForCardAbsent

• How to upgrade the style sheets when running?

  Strangely the style does'nt changes if I manually change the rules of css class in one of the css document and switch between the 2 files.

  @Override

  Public Sub initialize (URL url, rb ResourceBundle) {}

  final String cssUrl1 = getClass().getResource("/tracker/view/fxmlgui1.css").toExternalForm ();

  final String cssUrl2 = getClass().getResource("/tracker/view/fxmlgui2.css").toExternalForm ();

  rootPane.getStylesheets () .add (cssUrl1);

  rootPane.addEventHandler (KeyEvent.KEY_PRESSED, new EventHandler < KeyEvent > () {}

  @Override

  {} public void handle (KeyEvent keyEvent)

  If (keyEvent.getCode () .equals (KeyCode.DIGIT1)) {}

  rootPane.getStylesheets () .clear ();

  rootPane.getStylesheets () .add (cssUrl1);

  msgLabel.setText ("Css1 selected.");

  } ElseIf (keyEvent.getCode () .equals (KeyCode.DIGIT2)) {}

  rootPane.getStylesheets () .clear ();

  rootPane.getStylesheets () .add (cssUrl2);

  msgLabel.setText ("Css2 selected.");

  }

  }

  });

  }

  The event occurs and the style change of css1 and css2, as it was at the scene is rendered, but if I change one of the rules in the sylesheets after step is planned, the does'nt lifestyle changes more.

  So who is the General method to change the style of nodes change the css document at run time?

  It's like the original stylesheets in css documents someway implemented cache and does'nt update to any switch.

  Is the purpose of being able to edit the css file, and then press a key or press a button "recharge style" on the user interface and see the models updated? I don't think that's really the purpose of the css style: intent is really that the css file that will be provided in the your application jar file and never even extracted, both and edited and reloaded. (It can even be converted to a binary format that is faster to load).

  That said, however, the following works fine for me. (JDK 1.7.0_25, JavaFX 2.2.25). Run the application, you see the label in blue. Edit the css and save (without leaving the app), press the button reload the style, and you see all changes take effect. Who does not work for you?

  import javafx.application.Application;
  import javafx.event.ActionEvent;
  import javafx.event.EventHandler;
  import javafx.scene.Parent;
  import javafx.scene.Scene;
  import javafx.scene.control.Button;
  import javafx.scene.control.Label;
  import javafx.scene.layout.VBox;
  import javafx.stage.Stage;
  
  public class CssReloader extends Application {
  
   @Override
    public void start(Stage primaryStage) {
    final VBox root = new VBox(5);
    final Button reloadButton = new Button("Reload style");
    reloadButton.setOnAction(new EventHandler() {
              @Override
              public void handle(ActionEvent event) {
                  loadStyle(root);
              }
          });
    final Label label = new Label("A message");
    root.getChildren().addAll(reloadButton, label);
    loadStyle(root);
    primaryStage.setScene(new Scene(root, 300, 150));
    primaryStage.show();
    }
  
    private void loadStyle(Parent node) {
        node.getStylesheets().clear();
        node.getStylesheets().add(getClass().getResource("editMe.css").toExternalForm());
    }
  
    public static void main(String[] args) {
    launch(args);
    }
  }
  

  editMe.css:

  
  @CHARSET "UTF-8";
  .label {
   -fx-text-fill: blue ;
  }
  

  Update: of course, this code will not work if you combine this as a jar file and run it from there. getClass () .getResource (name) produces a URL that represents a resource loaded from the same location as the class underway (in this case the jar file), and toExternalForm() that allows to convert to a string. Of course to edit a css won't help in the bundled jar file. (Try to view as follows. Launched from a file system class loader, you will get a file:// url; launched from a jar class loader, you will get a pot: / / class loader.)

  private void loadStyle(Parent node) {
        node.getStylesheets().clear();
       String resource = getClass().getResource("editMe.css").toExternalForm() ;
       System.out.println(resource);
        node.getStylesheets().add(resource);
    }
  

  To force a system file URL, even if you run from a jar file, you can do this:

  privatevoid loadStyle(Parent node) {
        node.getStylesheets().clear();
        try {
              final String resource = Paths.get("/path/to/editMe.css").toUri().toURL().toExternalForm();
              System.out.println(resource);
              node.getStylesheets().add(resource);
          } catch (MalformedURLException e) {
              e.printStackTrace();
          }
    }
  

  Now, of course you have something of a headache of deployment; you will need to make sure somehow that there is a css file in the correct location - outside packaging jar - as part of the deployment of your application. You can check for its existence at startup, and if she's not here read a default version of your jar file and write it in the location in which you expect to find; or find another strategy.

  Post edited by: James_D

• How to upgrade the ArrayCollection collection when running?

  Am facing a problem with the arraycollection collection...
  will have an arraycolelction like that...
  var dpHierarchy:ArrayCollection = new ArrayCollection([)
  {Region: "Application1"},
  {Region: "Demand2"},
  {Region: "Demand3"},
  [{Region: "APPROVISIONNEMENTS4"}]
  
  now what I'm looking for is... How to upgrade this arraycollection collection during execution using actions script?
  I need to update this collection table something like this...
  
  var dpHierarchy:ArrayCollection = new ArrayCollection([)
  {Region: "Application1", year: '2008'},
  {Region: "demand2', year: '2008'},
  {Region: "Demand3', year: '2008'},
  [{Region: "APPROVISIONNEMENTS4", year: '2008'}]
  
  How to add the year field in to existing collection arraycollection as shown in the example...
  
  Thanks in advance
  Pratap
  

  Hey get...

  I have to just give

  dpHierarchy [0] ['year'] = '2008 '.

  :-)

• How to disable the button submit when running

  Hello
  
  I create a page with buttons createEmployee, deleteEmployee and updateEmployee employee management.
  
  I want to disable the buttons send above if the user is "OPERATIONS".
  
  My code as follows:
  
  String userName = pageContext.getUserName ();
  
  {if ('Operations'. Equals (username))}
  OAPageLayoutBean page = pageContext.getPageLayoutBean ();
  page.prepareForRendering (pageContext);
  OAGlobalButtonBarBean buttons = (OAGlobalButtonBarBean) page.getGlobalButtons ();
  OAGlobalButtonBean button = (OAGlobalButtonBean) buttons.findIndexedChildRecursive ("CreateEmployeeButton");
  button.setDisabled (true);
  }
  
  but he throws NullPointerException.
  
  For this code, I guide the OAF Dev R12.
  
  can you explain what is function_name in the next line
  
  Button OAGlobalButtonBean = (OAGlobalButtonBean) buttons.findIndexedChildRecursive ("< function_name >");
  
  I tried with the id of the button, but I didn't work.
  
  Can you explain about this clearly.
  
  Thanks in advance,
  SAN

  Hello

  I think that your button on the page is in the region of pageButtonBar.

  Use code below.

  String userName =pageContext.getUserName();
  
  if("OPERATIONS".equals(userName)){
  OASubmitButtonBean button = (OASubmitButtonBean) webBean.findChildRecursive("CreateEmployeeButton");
  if(button!=null)
  {
      button.setDisabled(true);
  }
  } 
  

  Kind regards
  GYAN

• How to detect the operating system when running?

  I have a library that I use a mobile (android) and the office-air projekt. I want to code something like this (pseudo-code):

  If (OS is mobile/android)
  this.addFieldUIs (myPopUpList);

  ElseIf (OS == desktop)

  this.addFieldUIs (myDropDownList);

  Is it possible to archive this?

  You can try Capabilities.version. I used it to make the distinction between IOS and Android, and you can probably find Windows or Mac from that, too.

• Startup error: DLL Load error can not load the resource dll: REPLRES. RLL the specified module could not be found

  Original title:

  ReplSync.dll - error loading DLL cannot load resource dll: REPLRES. RLL the specified module could not be found

  I get this error message whenever I start my computer: replsync.dll - DLL Load error can not load the resource dll: REPLRES. RLL specified module is not found Help please?  Thank you!

  Hello
  You did changes to the computer before the show?
  Method 1:
  Step 1:
  
  You can try to start in safe mode and check if the problem persists.

  The Advanced Boot Options screen lets you start Windows in advanced troubleshooting mode. You can access the menu by turning on your computer and pressing the F8 key before Windows starts.

  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.

  Advanced startup options
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  
  Step 2:

  If the problem does not occur in safe mode, and then try to perform the clean boot and see if the problem still occurs. Clean boot helps eliminate software conflicts. For more information, see the following link:

  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the article mentioned above.

  Method 2:
  
  You can run Windows Defender Offline tool.

  See the following link for more information about the same:

  What is Windows Defender in offline mode?

  http://Windows.Microsoft.com/en-us/Windows/what-is-Windows-Defender-offline
  
  Windows Defender Offline: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows/Windows-Defender-offline-FAQ
  
  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  Method 3:
  
  Try the SFC (System File Checker) scan on the computer.

  SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

  Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

  Reference:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Let us know if it helps!

• How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330

  Hello

  How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330? Found no parameters. I can click on F2, then network and passwords, is this all I could configure?

  OK, I got it - you must click F1 several times when starting system upward!

• Local - could not load the resource group file in Dev Mode only

  Running into a problem loading, a resource group, but it only happens in dev mode. Details are provided below:

  =====================

  Current context:

  =====================

  -version: 5.1

  =====================

  Details of the local environment:

  =====================

  -In the main file of the application, we have (false names in this post):

  < mx:Metadata >

  [ResourceBundle ("MyResources")]

  < / mx:Metadata >

  -In the plugin.xml file, we have:

  "< id ="com.xxx.xxx plugin"moduleUri =" Moduleui.swf "defaultBundle ="MyResources">

  < resources >

  < local resource '{local}' = >

  <! - relative path of the .swf resource generated by the build script - >

  < uri="locales/Moduleui-ui-resources-{locale}.swf"/ module >

  < / resource >

  < / resource >

  =====================

  Question:

  =====================

  -If we compile and generate and deploy the application, everything works, resources (images, icons, strings) are all correctly loaded.

  -When we took it in Dev Mode to debug the application that is vital for us because of the complexity of the application and the DTO transferred, an exception is thrown by saying that it cannot load the resource file. The same file that loads correctly when we do a deployment.

  =====================

  Additional details:

  =====================

  -To add to the mystery, we imported the UI project Hello-World-i18 from the client directory of examples of vsphere sdk and it works fine when we run it in dev mode.

  -We looked on the configurations under .flexProperties .actionScriptProperties and others, and we have at this moment absolutely no idea why the other project of the resource group will not load in Dev Mode.

  Any help pointers are greatly appreciated.

  Thank you

  Alfredo

  See the SDK FAQ article "Runtime Error #2036: never finished loading."

  If it does not find your resource file, it must be because you don't compile it correctly while in Eclipse.

• How to load the shared entities

  Hello guys! I did experiments with Chargeback manager for awhile, but I have a question. So far, I have seen that with Chargeback manager, it is very easy to calculate the cost of features in a virtual infrastructure (for example, ESXi, VM etc) based on several cost models.
  But what happens when we talk about shared resources? For example if a (BU) Business Unit uses an ESXi server, it is very easy to load than BU. You have created a cost report that ESXi and you present to the BU.

  But when, on the other hand, you have DRANK using the same things that ESXi (for example a mail server) can become more complicated. You can still find the cost of this ESXI, but how will you allocate this cost on the BU who use this server? For example, divide the cost by the number of BU? Or divide the cost by the number of BU take the consideration of the number of users in each BU... etc...

  So the question is, if Chargeback Manager has additional features that could help this process...

  Bravo!

  Hello

  Yes, but the function is only limited to virtual machines directly added to a folder of chargeback hierarchy. Chargeback has an option to share a VM on records (i.e. from Business units). Please refer to the user guide for "sharing cost of Virtual Machine.

  For now, you need to calculate the percentage of shares according to the criteria (number of email users) for a virtual computer and use this Chargeback percentage manually.

  Kind regards

  Agnes

  From: communities emailer [email protected]<>[email protected]>

  Reply-To: communities emailer [email protected]<>[email protected]>

  To: Agnes Pannem [email protected]kumar<>[email protected]>

  Subject: New message: "how to load shared entities.

  Http://communities.vmware.com/index.jspaVMware communities >

  How to load the shared entities

  juan11http://communities.vmware.com/people/juan11response > in VMware vCenter Chargeback - see the discussion complete onhttp://communities.vmware.com/message/2051025#2051025

• Add items to the combo box when running

  In my program, I want to add int '34' "43", "17"... and let the user choose one of them to the drop-down list box. How can I add items to the combo box when running. Create a property node 'String [] '? I try that, but its screen is "3443". I want to display as "34".

  43

  17

  See attached extract

  

• BlackBerry smartphone how to stop the charge battery when it is connected to the PC?

  Hi guys, anyone know how to prevent the battery charge when the BlackBerry device is connected to the desktop via USB Manager? TKS!

  boldberries wrote:

  and I heard that it is bad recharge the battery when it is completely full.

  No good info. It is always good to overflow of a charge.

  Here's some good advice from loading, please read and you will see that many of them will be applicable to you.
  http://www.blackberrynews.com/2008/05/20/battery-use-tips-for-your-maximum-battery-life/

• Customer HFM 11.1.2.2 error - "cannot continue - unable to load the resource file.

  Version: 11.1.2.2.306

  Desktop Client (11.1.2.2) installed and when I try to open the client I get an error message saying

  "Cannot continue - unable to load the resource file.

  Note: I have uninstall and installed once more, still the same error and I tried to install 11.2.2.000, 11.1.2.2.306 customers HFM, still useless

  Please suggest

  He worked installing Client HFM 11.1.2.2.306 64bits, previous, we tried 32 bit that, reason why the origin of this problem. Now resolved.

• JSON cannot load the resource

  Hello, I'm doing a slide based on a .json file, but I can't seem to make the animation to run.

  code for the stage:

  $.getJSON ("data.json") (.the)

  {function (Data)}

  $(données, fonction (index, item) {} .each)

  var s = sym.createChildSymbol ('template', 'content');

  s.$("title").html (Data [i] .title);

  s.$("description").html (Data [i]. Description);

  s.$("price").html (Data [i] .title);

  s. $("img") .css ({'background-image': "url ('" + data [i].) "}) (image_+_«_'_»)});

  s.Play ();

  });

  });

  .json file:

  [

  {

  "title": "flavor 1",

  "description': ' Orange & pineapple."

  "Price':"$ 15. "

  'img': ' images/img1.jpg ".

  },

  {"title": "Perfume 2"}

  "description': 'apples and orange."

  "Price':"$ 15. "

  'img': ' images/img2.jpg.

  },

  {

  "title": "perfume 3",

  "description': 'cocoa."

  "Price':"$ 15. "

  'img': ' images/img3.jpg.

  },

  {

  "title": "perfume 4",

  'description': 'apricot ',.

  "Price':"$ 15. "

  'img': ' images/img4.jpg.

  },

  {

  "title": "perfume 5",

  "description": "Coconut."

  "Price':"$ 15. "

  'img': ' images/img5.jpg.

  },

  {

  "title": "perfume 6",

  'description': 'Lemon,'

  "Price':"$ 15. "

  'img': ' images/img6.jpg.

  },

  {

  "title": "perfume 7",

  "description': 'banana."

  "Price':"$ 15. "

  'img': ' images/img7.jpg.

  }

  ]

  (the file is there)

  The error:

  Could not load the resource: the server responded with the 404 (not found) status http://localhost:54321/_DRIVE_C_EVIRD_/Users/Lee/Desktop/Jsonslider/data.json

  Any help appreciated, if possible...

  !

  Finite elements.

  solved. the json file is named data.json.txt, but the txt was not visible, I deleted it and it worked.