How to load the shared entities

Similar Questions

• Unable to load the shared library nilvce.*

  When you try to deploy a Labview 2009 real-time application, I get the message:

  Deployment XDNodeRunTimeDep.lvlib:loadnilvce.viXDNodeRunTimeDep.lvlib:loadnilvce.vi loaded with errors on the target and was closed.

  LabVIEW: Unable to load the shared library nilvce. *: niLVCtrlEngineReserveProc:C on the target RT device.
  Completed with errors of deployment

  I reformatted the CRIO-9073 and reinstalled the software, but this did not help.

  Any ideas on how to solve this problem?

  I was able to solve this problem by changing the settings in a timed loop Structure.

  The Source Type has been set to "synchronize in the scan engine.  This change to the problem solved 1 kHz clock source.

  This vi was initially written for the interface of the scan engine and reused on another project that uses the FPGA interface.

• How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330

  Hello

  How to load the CMOS (get the Bios settings) on Lenovo IdeaCentre K330? Found no parameters. I can click on F2, then network and passwords, is this all I could configure?

  OK, I got it - you must click F1 several times when starting system upward!

• Unable to load the shared library LVASPT_WA.*

  Hello

  I have a hope that easy to fix the error: I want to use the function "WA Detrend' to the signal processing tool advanced in a real-time application running on a cRio 9030. When I try to run the VI I get the following error:

  ...

  Deployment NI_AdvSigProcWA.lvlib:WA decimation Filter.vi

  NI_AdvSigProcWA.lvlib:WA decimation Filter.vi loaded with errors on the target and was closed.
  LabVIEW: Unable to load the shared library LVASPT_WA.*ptDecimationFilterH:C. make sure that the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  ...

  I reinstalled signals Advanced processing toolkit and linked things 'add new software' MAX, but the error persists.

  A picture of what the system looks like to the MAX is attached.

  Also, I Fund this post:

  http://forums.NI.com/T5/LabVIEW/problem-error-deploying-item-on-RT/m-p/3201345/highlight/true#M92822...

  could someone tell me what he means by "Please check the installation of the custom software all mode '?

  Can you telll me what I am doing wrong?

  Thank you very much in advance!

  I ran your situation in R & D, and the problem seems to be as a result of Advanced Signal Processing Toolkit is not not compatible on the x 64 under Linux RT OS in the 9030.  The product page could be clearer on this gap.  I am currently a web application to get this fixed!

  Best,

  David

• Error message "unable to load the shared library.

  I try to get my programs for school to work, and I get these error message whenever I try to run anything. The last line of the State of deployment is as follows:

  Deployment time get NLVSim and isAcceptedStep.vi IsAcceptedStep.vi and NILVSim get busy with errors on the target and has been closed.

  LabVIEW: Unable to load the shared library NILVSim.*: SIM_GetTimeAndIsAccepted:C. make sure the library is present on the target of RT. Either MAX allows you to install software from OR or FTP to transfer custom RT target libraries.

  I tried everything I can think of to fix this. I checked NEITHER Max and I'm all for date on the software. I reinstalled LabVIEW twice, and I reset my myRIO. My classmates do not experience problems with getting theres to work. I start to lose hope and hope someone might know what the question. Thank you for your help.

  WubaDee,

  NILVSim is part of the LV Control Design and Simulation Module. This one is correctly installed on your Windows development system and you installed it on your myRIO?

  Norbert

• How to load the operating system of split hard drive D of Aspire5315?

  OS in my laptop does not work correctly. Standard recovery system does not work - no food no points.

  How to load the operating system of split hard drive D of Aspire5315? -step by step please.

  Please consult this useful link: http://acer.custhelp.com/app/answers/detail/a_id/2631/

• How to load the second list meter if I have something in the first list of select/focus?

  How to load the second list meter if I have something in the first list of select/focus?

  public class spintest extends BaseScreen implements {FocusChangeListener}

  final String [stateList] = {"New York", "Washington"};
  final String [] NYcities = {'Manhattan', 'Queens', 'Brooklyn', 'Bronx'};
  final String [] WashCities = {"Redmond", "Kent", "Seattle", "Bellevue"};

  public SpinTest() {}
  SpinBoxFieldManager spinBoxMgr = new SpinBoxFieldManager();

  SpinBoxField spinBoxStates = new TextSpinBoxField (stateList);
  spinBoxStates.setFocusListener (this);

  SpinBoxField spinBoxCities = new TextSpinBoxField (NYcities);

  spinBoxMgr.add (spinBoxStates);
  spinBoxMgr.add (spinBoxCities);

  Add (spinBoxMgr);
  }

  ' Public Sub focusChanged (field field, int context) {}
  If (spinBoxStates == field) {}
  Salt string = (String) spinBoxStates.get (spinBoxStates.getSelectedIndex ());
  If (sel.equals ("New York")) {}

  I have to load all the cities of New York in the second wheel if I select 'New York' in the first wheel

  }
  else {if (sel.equals ("Washington"))

  I have to load all the cities of Washington in the second wheel if I select 'Washington' in the first wheel

  }

  }

  Simply call the TextSpinBoxField.setChoices method, transmitting your new list of choices.

• How to load the metadata cloud SEEP of Fusion GL

  Hello

  Can someone let me know how to load the metadata pending SEEP cloud of merger GL through the management of data (FDMEE).

  I'm not able to see the metadata tab rule in FDMEE, as there was in previous versions.

  Y at - it another option to load the metadata into the clouds.

  Kind regards

  Srikanth

  You can not directly integrate metadata into FDMEE PBCS. The metadata option has been disabled.

• 'ERROR 01' as I have only 66 MB of free space on my MacBook Air: (how to load the external Creative cloud on a hard drive software?

  I bought the full package, but I couldn't get it to load on my laptop.

  So my question is:

  How to load the external Creative cloud on a hard drive software?

  Or do you spend, how the "Installer Creative Cloud' to load it on an external hard drive?

  Thanking you in anticipation.

  : )

  you have the cc office application installed on your computer?

  If not, install the - apps Download Adobe Creative Cloud | CC free trial Adobe

• How to load the site Web of Movieclip. AS3.0 Flash

  Hi, we need to load the website in movieclip. (www.adobe.com). how to load the flash swf file in the site.

  Thks

  If you create an AIR application, you can use the HTMLLoader class.

  http://help.Adobe.com/en_US/FlashPlatform/reference/ActionScript/3/Flash/HTML/HTMLLoader.h tml

• How to load the opencard.properties when you use OpenCardFramework as a Jar?

  Hello
  
  I use the OpenCardFramework as a plug-in in eclipse project, when the other project to use, the opencard.properties is not found.
  So I put the opencard.properties file in the [java.home]/lib/opencard.properties folder, it works.]
  
  But I want to put opencard.properties file in another project, then how to load the file.
  
  Thanks in advance!

  CardTerminals.waitForChange
  CardTerminal.waitForCardPresent
  CardTerminal.waitForCardAbsent

• How to load the contents of a layer as a selection in photoshop CS4

  Hello

  In photoshop cs4 when I ctrl-click on a layer thumbnail in the layers panel, photoshop select any layer not its content.  How to load the contents of a layer as a selection in photoshop cs4?

  Thank you

  to load the contents of the layer as a selection, you go to the Panel layers and Ctrl + click on the RGB.

• How to load the image into the Blob field in Sql?

  Hello
  
  I want to know how to load the image into the Blob field in Sql
  
  Concerning
  
  
  Therese

  Re: How to load the image into the Long Raw column?

• How to load members shared in the planning?

  Hello
  How can I mark some dimension as a shared member member?
  When I put the option of data storage for 'Shared Members' is recovery error: could not load the dimension member, error message is: com.hyperion.planning.InvalidHALValueException: data storage: shared members
  
  When I put in storage of data to null or to 'Keep' there is no error, but only Member present in the outline.
  
  Thanks in advance.

  Hello

  Are you assign the value of the DTX200 'Shared member', it must be set to 'Shared '.

  If you want to find more information about the use of the ODI plan, check out my blog.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to create the shared library for linux real-time target in labVIEW Windows?

  I use myRIO running linux in real time. In my project, I need to pack some C code, so I tried the node library function call.

  I know that I should use the tools compile cross - compile linux on Eclipse to compile c code in linux .so library. But the problem is that call library function node does not recognize the .so file because my labVIEW runs on a Windows PC.

  What should I do to fix and how to combine C code with labVIEW during programming for devices shipped as myRIO?

  Basically, you must also create a Windows DLL that exports the same functions. These functions can be empty stubs if you do not want to run the code correctly on Windows, otherwise you will need to consider how to implement the equivalent functionality on the Windows API.

  Then you can write in your node library call as the name of the library ". "*" and the name of the shared library Windows ".dll" while the Linux version is called "name of your library > .so". LabVIEW will replace the * after the comma in the name of library with everything that is the preferred extension shared library for the platform it is running on and therefore load the right shared library.

  Alternatively you can wrap call all the nodes of the library in a structure that contains the node library in the case of Linux RT and all what you want to run on other platforms in the case of default or a case of specific platform, call the conditional compilation.