How to maintain the sequence DB value if we don't save the record?

Similar Questions

• How to maintain the life of your printer

  It seems more common that everyone feared how to maintain the service life of the cartridges from the printer itself.  As many variations of parameters and environment may play a role in how long your ink will actually last. A more official document can be found here about the science behind the ink, how to use it and how to make it last longer.  I will get into issues that affect the overall performance and life cycle of the printer.  I recommend to use the Startup ink supplied with the printer until he is gone because it contains chemicals of this condition and prolong the life of the print head for future use.

  I urge users to keep the printer connected directly to a wall outlet (namely for troubleshooting purposes). As with all electronics that are showing signs of failure, you can start with the power source if one really wants to follow the flow of a schema logic.  By eliminating the devices that can not to themselves, you removed a piece more equipment from the equation.  A more specific reason would be due to electromagnetic interference.  Wireless devices are vulnerable to interference with symptoms like error messages of false, lines in digital images, strange noises and frequent jams.

  Surge protectors must regulate the power distributed to each connected device.  It is possible that the printer is not the right amount of power and may fail as the printer power problems in hibernation mode with more features like duplex printing, it is impossible to recover , cable USB not detected and the light on the module displaying a yellow instead of green.  If the module and the surge protector are fighting for the control, it can cause a variety of problems that could easily be repaired by plugging the printer directly into a wall outlet.

  The next major issue many users face is the print head.  It is as well as the maintenance of ink as well.  It is important to clean the print head and the best way to do that is to use it and keep the good ink in the printer.  Over time, the chemicals can not even begin to change or develop air bubbles in the cartridge.  Not to mention, ink (well pigmented) still contains fluids that can evaporate if the printer is not rooted and off properly when not in service.  Of course, some of the processes of preparation printer used when the power of the printer can use very valuable ink, but, on the other hand, it's good for the life of the printhead to leave these processes to perform according to its specifications.

  The print head is composed of tiny nozzles and parts fragile this is why it is also one of the most expensive areas of the printer.  Most printers contain many self-cleaning utilities which is recommended to regularly (I suggest at least once a month) to help keep the printhead clogging and causing stains on the sheet itself. There are a number of unconventional methods to try once the printhead has dried up in fact, but when you try these steps you may totally break the part.

  Dust and smoke particles can also cause problems with the print head, but the printer entirely.  It is often the main killer of electronics as well as hairs and animal dander, dirt from moisture and humidity, paper for printer cheap and sand.  The air is full of impurities and really can not be prevented.  Preventive measures can be taken with dehumidifiers and a uniform cleaning, but over time, there is no real way to prevent it from happening.  Dust and air blowers have been known to cause not only solders to separate but may deposit particles of dust in places that could actually damage the printer entirely.  Instead, a favorite device is known as an empty computer.  It helps to remove the fine dust in the sense just that pushing forward into the printer.

  Paper jams also cause many more problems if is not removed correctly. HP recommends pulling the paper in the direction of the gears.  When removing a paper jam, you won't hear a grinding because it leads finally to the teeth are stripped like a screw, but simply once fully detach one of these devices. It is virtually impossible to fix a paper roll or similar because all parts are connected to each other and not sold in parts stores.

  At the back of most HP printers, you can remove the rear access door or duplexer (double-sided printing device) and easily join the paper in this way.  If you see the paper jam is located next to the Board, and then remove the piece from the back and take the paper with both hands to apply a gentle tug of same, and you should have no problem in removing the paper in this way.

  Paper quality can play a large role in the life of your printer.  Cheap paper can free of paper dust up into the gears and small machinery within the printer and are very difficult to clean.  Print incorrect parameters and issues related to food can cause the paper to stay in places that are not as easy to do.  In this case, remove the paper as long as slowly and patiently as possible to avoid them ripping out pages in places like between the wheels under the printhead and also causing error messages that will not disappear.  When troubleshooting printers, patience and troubleshooting documents will also help you keep your printer running longer.

  The printer doesn't like to not be put off by anything other than the power button.  I have always recommended the printer off when not in use (at least for long periods of time) to help keep the ink dry and high printing quality.  The reason why it is not recommended is because people will be unplugging the printer, while he is doing something and the negative effects that this might have some alignment problems serious, burn the computer chips and components similar to that in computers, fake error messages and possibly bricking of the printer if done at the wrong time.  Resets hard are great troubleshooting steps, but the abuse of this feature can result in irreparable damage.

  Fanning the paper before put you in the status bar is a good practice. About 25 sheets are perfect, because an overload of the status bar may also cause paper jams.  The paper guides of setting and selecting the appropriate paper type will put the science behind these settings wisely. Don't put paper in the tray while the printer is printing, crumpled, dirty, or coexist paper types and paper clips are all things to avoid.

  Software and communication issues deserve a section all to themselves.  The measures to prevent problems of this kind could not covered in a post, let alone a chapter.  The best thing to do to increase the performance and connectivity is to set a static IP address in the URL embedded in the printer if the printer is set up on a network (steps to do this are different from the printer to the printer).  USB cables must not be more than 3 meters long and kept in good condition as well as the power supply cord.  Keep your valuables out of reach of children and buy an extended service plan for many reasons.  You can enjoy all the services offered with a service plan in the case of a defective printer or simple product questions.  Keep the firmware up-to-date and to read reviews before you buy any electronic device.

  After reading this, I'm sure you're aware, that's all common sense, but at the time where you do not consider one of these suggestions you think back and wonder "if I had taken 10 seconds longer to avoid that I wouldn't spend 2 hours more set.»  Mistakes are made when frustrations and lack of care.  These are not delicate machines that deserving the highest shelf in the bathroom, but an understanding must be met, that once it's broken this avoidable?

  Troubleshooting of many documents can be found at www.hp.com/support.  They must be followed in order to avoid the repetition of the steps, steps unnecessary and causing more frustration.

• LOBs and how to retrieve the record inserted with EMPTY_BLOb()

  Hi guys
  
  
  How to retrieve the records inserted with EMPTY_BLOb() instead of NULL value.
  
  
  Best greetings
  A.G.

  There must be a better way, but these work:

  SELECT... from tableX where length (lob_column) = 0;
  SELECT... from tableX where dbms_lob.getlength (lob_column) = 0;

  Concerning
  Jonathan Lewis
  http://jonathanlewis.WordPress.com
  http://www.jlcomp.demon.co.UK

  "All experts it is a equal and opposite expert."
  Clarke

• How to maintain the Illustrator pen tool race settings (size, brush, etc.) for any new route?

  I'm a newbie, so it's probably obvious, but I can't find it in the tutorials or documents.  In Illustrator, I want to keep the race settings when creating multiple paths with the pen tool.  However, whenever I start a new path, the time settings back to what should be a default value.  For example, I put 16pt + Variable + Basic and STROKE width profile path.  When I start a new path, return to 1 point + uniform + Basic settings, and I have to back to my original. Other art programs I've used maintain the settings of the tool used lately until they are manually changed.  How can I get the settings to stay through multiple uses of the pen tool?  Thank you.

  Hi Bion_s,

  In the framework of play in Illustrator for a solution, I found that if you open your appearance Panel (window > appearance), select the menu drop down and deselect New Art has basic appearance.

  
  

  I found that when this option is disabled, you can select your profile and the width of the line and shoot several times without him returning to the default line!

  Please let me know if it works for you. I don't know how it might affect your workflow on other projects, but it has led to the behavior that you seemed to want.

  See you soon,.

  Michael

• How to maintain the Central Position during resizing

  How can I maintain the central position of the image in a re-size?  It would be useful to know both in photoshop and illustrator, but looking online, I couldn't find much information.

  You're talking about using the free transform on a layer or an object?   With Image > resize the central position is irrelevant.

  If you talk about free transform, hold down the ALT (Opt) to get expansion around the handle of the Center (of which yoo can move) and also the SHIFT key if you want to keep the proportions.

• How to maintain the different password for connection and PIA Appdesigner?

  Hi Experts,
  
  Can you help me how could maintain different passwords for the same user in the designer applications and PIA connection.
  
  According to my knowledge if the user exists in the psoprden table it could access Appdesigner and PIA. But how could give us differnty passwords for the same user while loggin to PIA and designer of the app?
  
  Thank you
  Yarli

  getyarli wrote:
  My friend had the same type of installation in its environment. And it is unclear how it was setup.

  He has been asked to use different password for connection Appdesigner and PIA, log in to the same user.

  Person working within a level LDAP (PIA) one directly to the database (AppDesigner)?

  Nicolas.

• How to maintain the synchronization of the hierarchy of the table with customer-specific data

  Series of paintings in our system, we have:
  
  Promotions (id, descr, datefrom, dateto,...)
  PromotionClients (promotionId, clientId) = list of clients whose promotion is valid
  PromotionProducts (promotionId, itemId) = list of products on sale
  
  The synchronization logic is simply that all promotion tables must be synchronized just to the customers present in the PromotionClients table. So each select element for these tables of publication contains something like "... and there are (select 1 from c PromotionClients where c.clientId =: CLIENTID). It works fine until there are some changes in the PromotionClients table. After the change of PromotionClients table starts to sync, but other tables do not - there is in fact no updates on their respective folders.
  
  Is there a solution to this problem other than to manually create the triggers for the PromotionClients table that would execute model-update on each related table? I mean - is there an existing function in OracleLite that woud let set a few references - to load to a point of publication/table?
  
  And in the face of similar problem - there is also Promotions.datefrom/dateto limitation. Promotion tables must be synchronized at the time where actual date is between Promotions.datefrom and dateto. When someone modifies some of these values and so the promotion valid for the time related tables does not automatically update and so they do not start to synchronize. Just the Promotions table begins to synchronize. So we might need to implement another trigger to perform updates dummy on the tables of PromotionClients + products, Promotions.datefrom/dateto update.
  
  I do not like the personalized relaxation approach - it just duplicates the synchronization logic and it is inconvenient to maintain the synchronization logic in two places (pubitem selects + custom triggers). I would like to find a solution of OL-native - as referring to load tables for each publication element that would cause triggers to OL to also catch the person in charge of the lines of tables (which were not actually modified) to be marked as dirty and synchronized to the client. Is there a solution like this? Or is there an alternative better than custom triggers?

  When you trigger an event in a related table, it gets registered for PGM compose the data in this table. If there is a suspicion, MGP will compose the data in these tables as well.

  So if you have something like a REGION_MAPPING table that maps the users in various locations and if you change the table data and want other tables that are joined with him to compose the data, and then add a hint of dependency to the tables mapping them to REGION_MAPPING. If these tables is regularly updated and data are being composed for the child tables, then you don't need the trick, just good practice to add it.

• How to make the record value appear in the "Message of success of the process?

  Hello
  
  I have a page called process "insert" "On submit - after calculations" and Validations with the look of PL/SQL codes such as:
  
  Start
  insert into abc (col1) values (: P7_col1)
  end;
  
  In the "Message of success of the process", how can I include the record value (ie: P7_col1, say, it's "Item1") in the message so that it could look like:
  
  Item1 has been added successfully.
  
  Thank you very much
  Helen
  
  Published by: user4503001 on July 21, 2009 11:20

  Helen,

  Substitution variables must be written in capital letters, always.

  Scott

• How to maintain the title of the page

  I have tested a model and extend the model to the whole of the site soon. However, I realize every time I change my template and update the web pages concerned, any security web pages are lost and replaced by the default in the model.
  
  Is it possible that I can apply the changes to the model while maintaining the individual title of each web page? Currently, the default title of the template is my company name. Then I add what is the web page according to the name of the company. Ex: 'Society - Contact information '.
  
  Thank you in advance for your help!

  > I have tested a model and the model will apply to the entire site
  > soon.

  Very bad plan, which. Application of a model to a page with the existing content
  cause you grief.

  > However, I realize every time I change my template and update the affected
  > web
  > pages, any security web pages are lost and replaced by the default title
  > in
  > model.

  This wouldn't happen with a model of appropriate construction.

  What DW are you using, and which makes the model?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "JP - LII" wrote in message
  News:e8meh7$MVU$1@forums. Macromedia.com...
  > I have tested a model and the model will apply to the entire site
  > soon.
  > However, I realize every time I change my template and update the affected
  > web
  > pages, any security web pages are lost and replaced by the default title
  > in
  > model.
  >
  > Is it possible that I can apply changes in the model while keeping each
  > web
  > individual title of the page? Currently the default title in the model is
  > my
  > company name. Then I add what is the web page according to the name of the company.
  > Ex:
  > 'Society - Contact information '.
  >
  > Thank you for your help in advance!
  >

• How to distribute the record value of single source on several target of FDM Records

  Hello

  Has tried to set the record of several members of the target source. I was thinking of using groups of logic?

  or is there another simple method using Scripts.

  Thanks in advance!

  PM

  I would recommend to create additional folders in the temporary table (strWorkTable), so they are then moved to the main table (tdatasegx)

  It's just a matter of implementation of the same script that runs the SQL process to generate the additional records you need.

  Take a look at ImportAction and its sous-evenements. You can find the details in the guide to the API.

  See you soon

• How to share the record group between 2 forms

  Hi all
  
  Some might guide me how to send one record group to another form and how it is received
  
  programmaticaly
  
  any help or advice, that I enjoyed
  
  Thank you

  Hello
  Little late but was not on the development computer.
  In fact the data you are trying to recover also ensure the data type. I mean if you retrieve DIGITAL data record group for the first column you use fld_1 , you must have to use the built-in GET_GROUP_NUMBER_CELL . Like this..

  DECLARE
    rg_id recordgroup;
  BEGIN
    rg_id := FIND_GROUP('my_rg');
    IF NOT id_null(rg_id) THEN
     :ctrl.text_item8 := GET_GROUP_NUMBER_CELL('my_rg.fld_1', 1);
    END IF;
  END;
  

  If If the field you get the record group's CHARACTER then you must use the built-in function GET_GROUP_CHAR_CELL like that...

  DECLARE
    rg_id recordgroup;
  BEGIN
    rg_id := FIND_GROUP('my_rg');
    IF NOT id_null(rg_id) THEN
      :ctrl.text_item8 := GET_GROUP_CHAR_CELL('my_rg.fld_1', 1);
    END IF;
  END;
  

  And if the salvage value of DATE data type, then GET_GROUP_DATE_CELL like this...

  DECLARE
    rg_id recordgroup;
  BEGIN
    rg_id := FIND_GROUP('my_rg');
    IF NOT id_null(rg_id) THEN
      :ctrl.text_item8 := GET_GROUP_DATE_CELL('my_rg.fld_1', 1);
    END IF;
  END;
  

  So, in you case I think the department_id data type is numeric in the database, and you use GET_GROUP_CHAR_CELL which will not work. Use the first one I showed you for numeric values.

  And also use the trigger a TIME NEW FORM INSTANCE used to retrieve the value. I want to use the first example in this trigger. Then you can see the value of the result of the shared record group.

  -Clément

• How to increase the recording time

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  Initial term of the title: Recvord
  I would like to extend the recording time is included in XP. It will be released in 3 hours. How can I do that. If I can't do this, then how RIP with Media Player 11

  ================================
  XP Sound Recorder is limited to 60 seconds.

  The free Audacity software may be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Audacity
  http://Audacity.sourceforge.NET/

  Recording with Audacity
  http://Audacity.sourceforge.net/manual-1.2/tutorial_basics_4.html

• How to delete the record from the classic report?

  Hi all

  I am currently working in the APEX 4.2.5.

  I did a classic report and I want to click on the link 'delete' to remove the record.

  But how can I do this?

  

  Thanks in advance

  See this recent thread on the forum: https://community.oracle.com/thread/3687421?start=0&tstart=0

  Thank you

  Tony Miller
  Software LuvMuffin
  Ruckersville, WILL

• How to remove the record of termination for a partner who has been rehired

  Hello can someone please advice on the script below:

  Partner hired as an intern on January 30, 2010, associated was called on August 5, 2010

  Now associated hired as full-time on August 7, 2010, and is always used

  Technically associated has been named in the Organization but still worked. It seems that this has been done as dismissal rather than transfer.

  Now, there are affect the associated benefits and plan to leave because of a gap in the last hire date.

  Question: How can I do the related record as if it had never ended? Partner must thus hiring as January 30, 2010 last date and no cancellation after that.

  
  

  #1. If you use a pay-

  If it is for a past period and you run payroll since then, it is not possible.

  When you terminate a person, the assignment gets end date.

  So for this person the first assignment would have dated at the end on August 5, 2010.

  And when you have again hired the person on August 7, 2010, a new assignment with assignment_number XXXX-2 would have been created.

  And everything works payroll would have used the new record of assignment for calculations.

  So the only solution is to change the date of service on the form of the person stopped and use this date for benefits or calculations.

  #2. If you do not pay-

  Then you can cancel the last rental for the person, so the state changes to the former employee.

  And then reverse to end employment.

  This should undo all changes to the person.

  Depending on what you use and how old is the correction, you must make a decision.

  Hope that helps.

  See you soon,.

  Vignesh

• How to use the record type as a parameter IN PL/SQL procedure or package

  Hi people,

  I need help on the record as the OUT parameter type. I am able to get out a single line as a parameter, but not getting do not idea how to get a multi ranks as output parameter.

  I have the code that works very well for a single line. Please see CODE1.

  But when I try to get several lines, I'm failing to do. Please see the CODE2. I get the error of compilation as

  
  

  Error report:

  ORA-06550: line 11, column 35:

  PLS-00487: Invalid reference to the variable "P_NAME.

  ORA-06550: line 11, column 1:

  PL/SQL: Statement ignored

  06550 00000 - "line %s, column % s:\n%s".

  * Cause: Usually a PL/SQL compilation error.

  Any help or a sample execution of script would be really useful.

  Thanks in advance.

  YZ

  --------------------------CODE1------------------------------------------

  -------------------------Package Spec-------------------------------

  CREATE OR REPLACE

  PACKAGE xx_sample_pkg as

  --

  Xx_sample_table_rectype RECORD TYPE IS

  (p_name varchar2 (40))

  number of p_emp_id

  );

  PROCEDURE xx_sample_prc (xx_sample_rec1, OUT xx_sample_table_rectype);

  END xx_sample_pkg;

  ------------------------------Package Body------------------------

  create or replace

  PACKAGE xx_sample_pkg AS BODY

  --

  PROCEDURE xx_sample_prc (xx_sample_rec1 OUT xx_sample_table_rectype) IS

  BEGIN

  SELECT ename, empno

  IN xx_sample_rec1

  FROM scott.emp

  WHERE ename = 'SMITH ';.

  END xx_sample_prc;

  END xx_sample_pkg;

  -------------------------------------------Execute----------------------

  DECLARE

  l_rec_type xx_sample_pkg.xx_sample_table_rectype;

  BEGIN

  dbms_output.put_line ('xx_sample_prc appeal');

  xx_sample_pkg.xx_sample_prc (l_rec_type);

  dbms_output.put_line ('YZ' | l_rec_type.p_name |') '|| l_rec_type.p_emp_id);

  END;

  ---------------------------------------------------------------

  -------------------------CODE2-------------------------------------------

  -------------------------Package Spec-------------------------------

  CREATE OR REPLACE

  PACKAGE xx_sample_pkg as

  --

  Xx_sample_table_rectype RECORD TYPE IS

  (p_name varchar2 (40))

  number of p_emp_id

  );

  PROCEDURE xx_sample_prc (xx_sample_rec1, OUT xx_sample_table_rectype);

  END xx_sample_pkg;

  ------------------------------Package Body------------------------

  create or replace

  PACKAGE xx_sample_pkg AS BODY

  --

  PROCEDURE xx_sample_prc (xx_sample_rec1 OUT xx_sample_table_rectype) IS

  BEGIN

  SELECT ename, empno

  IN xx_sample_rec1

  FROM scott.emp;

  END xx_sample_prc;

  END xx_sample_pkg;

  -------------------------------------------Execute----------------------

  DECLARE

  l_rec_type xx_sample_pkg.xx_sample_table_rectype;

  BEGIN

  dbms_output.put_line ('xx_sample_prc appeal');

  xx_sample_pkg.xx_sample_prc (l_rec_type);

  for l_rec in 1.l_rec_type.p_name.count

  loop

  dbms_output.put_line ('YZ' | l_rec_type.p_name (l_rec) |) » '|| l_rec_type.p_emp_id (l_rec));

  end loop;

  end;

  ---------------------------------------------------------------

  bb8c573a-6ca3-4d7c-90ed-e55c2df67201 wrote:

  But now, my question would be why the record type could not be used? My understanding is missing some concept between use of type type array collection record vs. Please specify.

  Do not confuse the folder with the collection.

  SY.