How to maintain the synchronization of the hierarchy of the table with customer-specific data

Similar Questions

• How to search the table with margins?

  Hello!

  I have a signal that I admire from a PXI-5600 and store it in a table. What I want to do is to find the top of the signal (which I did successfully) and then calculate the bandwidth.

  What I do now, is to take the peak value and calculate 20 dB, so I use the "search of table 1 d' but I get index - 1. My guess is that this is happening because of this doesnat table contain EXACTLY the calculated value.

  Can I search somehow in the table for the values around one calculated?  For example; If I calculated the 10.08 value I want to search all between 9, 9 - 10.1.

  so I wonder how I can trace these points whith a line between them in my diet already spectrum

  
  

• How to update the table with the number management

  Hello
  
  I need as there is a loc_tab of the created table as below,
  
  CREATE TABLE loc_tab
  (
  Country_ID NUMBER,
  country_code VARCHAR2 (3),
  country_name VARCHAR2 (50).
  State_ID NUMBER,
  state_code VARCHAR2 (3),
  state_name VARCHAR2 (50).
  city_id NUMBER,
  city_code VARCHAR2 (3),
  city_name VARCHAR2 (50)
  );
  
  I inserted records like below,
  

  COUNTRY_ID     COUNTRY_CODE     COUNTRY_NAME     STATE_ID     STATE_CODE     STATE_NAME     CITY_ID     CITY_CODE     CITY_NAME
  
            IND          INDIA                    TN          TAMIL NADU          CHN          CHENNAI
            IND          INDIA                    TN          TAMIL NADU          TRI          TRICHY
            IND          INDIA                    TN          TAMIL NADU          CMT          COIMBATORE
            IND          INDIA                    TN          TAMIL NADU          MDU          MADURAI
            IND          INDIA                    AP          ANDHRA PRADESH          HYD          HYDERABAD
            IND          INDIA                    AP          ANDHRA PRADESH          SEC          SECUNDRABAD
            AUS          AUSTRALIA               QLD          QUEENSLAND          BRI          BRISBANE
            AUS          AUSTRALIA               TAS          TASMANIA          HB          HOBART
            AUS          AUSTRALIA               TAS          TASMANIA          CCE          CITY OF CLEARANCE
            AUS          AUSTRALIA               TAS          TASMANIA          BUR          BURNIE

  Now, I wanted to update the table such that all ID columns are updated with running number.
  
  Each ID columns should get incremented so that, for Country_ID column corresponding to "India" If country_id is 1, that there must be one for all the lines with the name as "India". Likewise for "Australia".
  
  In the case of State, she also has the same logic with numbers repeated until the very name of the State comes.
  
  For the city, it of course will hold separate ID only because the name of the city will not get duplicated.
  
  This update must be done in the normal way using simple SQL such as no PLSQL don't like looping, etc... is involved.
  
  Here are the contents of the table, and that's how the table should be updated,
  

  COUNTRY_ID     COUNTRY_CODE     COUNTRY_NAME     STATE_ID     STATE_CODE     STATE_NAME     CITY_ID     CITY_CODE     CITY_NAME
                                          
  1          IND          INDIA          1          TN          TAMIL NADU     1     CHN          CHENNAI
  1          IND          INDIA          1          TN          TAMIL NADU     2     TRI          TRICHY
  1          IND          INDIA          1          TN          TAMIL NADU     3     CMT          COIMBATORE
  1          IND          INDIA          1          TN          TAMIL NADU     4     MDU          MADURAI
  1          IND          INDIA          2          AP          ANDHRA PRADESH     1     HYD          HYDERABAD
  1          IND          INDIA          2          AP          ANDHRA PRADESH     2     SEC          SECUNDRABAD
  2          AUS          AUSTRALIA     1          QLD          QUEENSLAND     1     BRI          BRISBANE
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     1     HB          HOBART
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     2     CCE          CITY OF CLEARANCE
  2          AUS          AUSTRALIA     2          TAS          TASMANIA     3     BUR          BURNIE

  Thank you and best regards,
  Shiva
  

• How to create the table with the rows and columns using the layout?

  One of my friends advised me to put my site on the mode of provision as it is better than the standard as he said
  but I couldnot make an ordinary table with the rows and columns in mode available th
  y at - there someone who can tell me how to?
  Thank you very much

  Wednesday, April 18, 2007 21:01:38 + 0000 (UTC), "Mr.Ghost".
  wrote:

  > A friend of mine advised me to put my whole site on the mode of disposal as its
  > better than standard, as he says

  Your friend won't. Don't listen to him any more. Mode of disposal creates
  very fragile and rigid code pauses at the first opportunity.

  Gary

• How to hide the table header if no data is present

  Hello

  I need to hide the heading for the table if no data is present. Table a, column 5. If no matter what clolumn gave this section table should not be display.

  I use <? If: count (Installation_Event_S19) = 0? > but this is not a job for me.

  Could you please help me.

  Thank you

  Sylvie Kumar

  
  

  I think you want to show/hide a table that if its conditions of licence exists and have some value. You can have an if condition including the table.

• How to create the table with the description of the table

  Hello

  I would like to create the array with the description of the table (such as the creation of package or procedure with comments).

  Is it possible to achieve thanks to the oracle, if possible please help me achieve this goal.

  Thank you and best regards,

  Ibrahim Sayyed.

  > create table test (col1 number);

  > comment table test is "about a comment ';

  > select comments from user_tab_comments where table_name = 'TEST ';

  COMMENTS
  ____________________________________________________________________
  This is a comment

• How to create the table with value list/map binding

  I need to display some values in a tabular format. It is possible to create a table adf without having value binds to a VO object. I can make a table with a combination of list/map.
  
  I want to change the format of display with minimum change in the application. I therefore seeks a change to a list/map and map with the table.
  
  Here is the structure in that I need to post.
  
  _______________________
  |     | Header1. Tete2 |
  |_______|_______|_______|
  | Txt R1 | value 1. Value 2.
  |_______|_______|_______|
  | Txt R2 | Value 3. value 4.
  |_______|_______|_______|
  
  All views is completely irrelevant. So I should not create a VO and add the VO object lines.
  
  Published by: yannick June 10, 2011 11:34

  Yes, you can do it. Create a pojo with properties (column) that you want to display in the table and create a list of instances of the POJO and then you can fill your table using the list.

  Sample:

  //POJO
  public class SamplePojo {
  
  private String col1;
  private String col2;
  
  public SamplePojo(String col1, String col2){
    this.col1 = col1;
    this.col2 = col2;
  }
  
  //add setter and getter methods
  }
  
  //Inside bean, prepare a list with pojo instances (Assume a getter exists for pojoList)
  pojoList = new ArrayList();
  pojoList .add(new SamplePojo("Value1", "Value2");
  pojoList .add(new SamplePojo("Value3", "Value4");
  etc.
  
  //Inside jspx
  
     
       
     
     
       
     
  
  

  HTH
  Jean Lou

• How to build the table with all the combinations of a source table?

  Hello

  I have a 2D array that contains the list of the power user-defined settings. The number of PSs (table rows) is not fixed. For example - 3 PSs:

  Stage of Min Max name

  PS1 3.0 3.6 0.3

  PS2 0.9 1.2 0.1

  PS3 1.7 1.9 0.1

  I need to build, from this list, a table of all the combinations as below:

  PS1 PS2 PS3

  3.0 0.9 1.7

  3.0 0.9 1.8

  3.0 0.9 1.9

  3.0 1.0 1.7

  3.0 1.0 1.8

  3.0 1.0 1.9

  3.0 1.1 1.7

  3.0 1.1 1.8

  3.0 1.1 1.9

  3.0 1.2-1.7

  3.0 1.2-1.8

  3.0 1.2-1.9

  3.3 0.9 1.7

  3.3 0.9 1.8

  3.3 0.9 1.9

  3.3 1.0 1.7

  3.3 1.0 1.8

  3.3 1.0 1.9

  3.3 1.1 1.7

  3.3 1.1 1.8

  3.3 1.1 1.9

  3.3 1.2 1.7

  3.3 1.2 1.8

  3.3 1.2 1.9

  3.6 0.9 1.7

  3.6 0.9 1.8

  3.6 0.9 1.9

  3.6 1.0 1.7

  3.6 1.0 1.8

  3.6 1.0 1.9

  3.6 1.1 1.7

  3.6 1.8 1.1

  3.6 1.1 1.9

  3.6 1.2 1.7

  3.6 1.2 1.8

  3.6 1.2 1.9

  How to build this table programmatically?

  (Note also that the number of rows in the source table is not fixed).

  Thanks in advance!

  Hi Berezka,

  using a magic of automatic indexing:

  

• How to fill the screen with custom display fields

  I need to instantiate a class of custom field and add it to a number fixed times who knows @ length of the screen.

  I created a table to create objects of a custom field, and then I add elements to the screen one by one.

  I use this code where the entries knows @ runtime.

  There is error but the fields are not added to the screen and the screen and the screen is blank.

  CustomField item[]=new CustomField[entries];
  int entries;
  for(int i=0;i			 
  Some stupid problem just to retrieve the integer. Now, copy the following code works correctly.
  		   

• How to get the webservices project customer specific use Oracle.

  I have a Web services project I developed in VS2005 where I use the Oracle.DataAccess.dll provided by Oracle 10 g ODAC to connect to an Oracle 8.1.7.4 database. I add a reference to the dll in the folder c:\oracle\product\10.2.0\client_1\ODP.NET\bin\2.x. I create and publish Web services and checked that Web services are working correctly. I ran into problems when I installed the latest version of the ODAC for Oracle 11, where the webservice Gets the following error ORA-03134 - this version of the server connections are more supported. Based on what I read here and ther panels, it seems that when I installed the ODAC for Oracle 11 he installed a policy file that redirects all calls to use Oracle 11 components data access rather than that I've specified explicitly in my project.
  
  Is it possible for me to always have the components of Oracle 11 working side by side with Oracle 10 g and forced my project to always use the components of Oracle 10 g?
  
  Published by: lordharlock on March 3, 2010 07:17

  Hello

  I just did a quick test with binding in an app.config file redirection, and has precidence over policy in the gac file.

  Here's my app.config. I compiled with 2.102.2.20, the app ran with 2.111.7.0, despite the 2.111.7.20 policy in the gac file.

  It will be useful,
  Greg

• How to maintain the life of your printer

  It seems more common that everyone feared how to maintain the service life of the cartridges from the printer itself.  As many variations of parameters and environment may play a role in how long your ink will actually last. A more official document can be found here about the science behind the ink, how to use it and how to make it last longer.  I will get into issues that affect the overall performance and life cycle of the printer.  I recommend to use the Startup ink supplied with the printer until he is gone because it contains chemicals of this condition and prolong the life of the print head for future use.

  I urge users to keep the printer connected directly to a wall outlet (namely for troubleshooting purposes). As with all electronics that are showing signs of failure, you can start with the power source if one really wants to follow the flow of a schema logic.  By eliminating the devices that can not to themselves, you removed a piece more equipment from the equation.  A more specific reason would be due to electromagnetic interference.  Wireless devices are vulnerable to interference with symptoms like error messages of false, lines in digital images, strange noises and frequent jams.

  Surge protectors must regulate the power distributed to each connected device.  It is possible that the printer is not the right amount of power and may fail as the printer power problems in hibernation mode with more features like duplex printing, it is impossible to recover , cable USB not detected and the light on the module displaying a yellow instead of green.  If the module and the surge protector are fighting for the control, it can cause a variety of problems that could easily be repaired by plugging the printer directly into a wall outlet.

  The next major issue many users face is the print head.  It is as well as the maintenance of ink as well.  It is important to clean the print head and the best way to do that is to use it and keep the good ink in the printer.  Over time, the chemicals can not even begin to change or develop air bubbles in the cartridge.  Not to mention, ink (well pigmented) still contains fluids that can evaporate if the printer is not rooted and off properly when not in service.  Of course, some of the processes of preparation printer used when the power of the printer can use very valuable ink, but, on the other hand, it's good for the life of the printhead to leave these processes to perform according to its specifications.

  The print head is composed of tiny nozzles and parts fragile this is why it is also one of the most expensive areas of the printer.  Most printers contain many self-cleaning utilities which is recommended to regularly (I suggest at least once a month) to help keep the printhead clogging and causing stains on the sheet itself. There are a number of unconventional methods to try once the printhead has dried up in fact, but when you try these steps you may totally break the part.

  Dust and smoke particles can also cause problems with the print head, but the printer entirely.  It is often the main killer of electronics as well as hairs and animal dander, dirt from moisture and humidity, paper for printer cheap and sand.  The air is full of impurities and really can not be prevented.  Preventive measures can be taken with dehumidifiers and a uniform cleaning, but over time, there is no real way to prevent it from happening.  Dust and air blowers have been known to cause not only solders to separate but may deposit particles of dust in places that could actually damage the printer entirely.  Instead, a favorite device is known as an empty computer.  It helps to remove the fine dust in the sense just that pushing forward into the printer.

  Paper jams also cause many more problems if is not removed correctly. HP recommends pulling the paper in the direction of the gears.  When removing a paper jam, you won't hear a grinding because it leads finally to the teeth are stripped like a screw, but simply once fully detach one of these devices. It is virtually impossible to fix a paper roll or similar because all parts are connected to each other and not sold in parts stores.

  At the back of most HP printers, you can remove the rear access door or duplexer (double-sided printing device) and easily join the paper in this way.  If you see the paper jam is located next to the Board, and then remove the piece from the back and take the paper with both hands to apply a gentle tug of same, and you should have no problem in removing the paper in this way.

  Paper quality can play a large role in the life of your printer.  Cheap paper can free of paper dust up into the gears and small machinery within the printer and are very difficult to clean.  Print incorrect parameters and issues related to food can cause the paper to stay in places that are not as easy to do.  In this case, remove the paper as long as slowly and patiently as possible to avoid them ripping out pages in places like between the wheels under the printhead and also causing error messages that will not disappear.  When troubleshooting printers, patience and troubleshooting documents will also help you keep your printer running longer.

  The printer doesn't like to not be put off by anything other than the power button.  I have always recommended the printer off when not in use (at least for long periods of time) to help keep the ink dry and high printing quality.  The reason why it is not recommended is because people will be unplugging the printer, while he is doing something and the negative effects that this might have some alignment problems serious, burn the computer chips and components similar to that in computers, fake error messages and possibly bricking of the printer if done at the wrong time.  Resets hard are great troubleshooting steps, but the abuse of this feature can result in irreparable damage.

  Fanning the paper before put you in the status bar is a good practice. About 25 sheets are perfect, because an overload of the status bar may also cause paper jams.  The paper guides of setting and selecting the appropriate paper type will put the science behind these settings wisely. Don't put paper in the tray while the printer is printing, crumpled, dirty, or coexist paper types and paper clips are all things to avoid.

  Software and communication issues deserve a section all to themselves.  The measures to prevent problems of this kind could not covered in a post, let alone a chapter.  The best thing to do to increase the performance and connectivity is to set a static IP address in the URL embedded in the printer if the printer is set up on a network (steps to do this are different from the printer to the printer).  USB cables must not be more than 3 meters long and kept in good condition as well as the power supply cord.  Keep your valuables out of reach of children and buy an extended service plan for many reasons.  You can enjoy all the services offered with a service plan in the case of a defective printer or simple product questions.  Keep the firmware up-to-date and to read reviews before you buy any electronic device.

  After reading this, I'm sure you're aware, that's all common sense, but at the time where you do not consider one of these suggestions you think back and wonder "if I had taken 10 seconds longer to avoid that I wouldn't spend 2 hours more set.»  Mistakes are made when frustrations and lack of care.  These are not delicate machines that deserving the highest shelf in the bathroom, but an understanding must be met, that once it's broken this avoidable?

  Troubleshooting of many documents can be found at www.hp.com/support.  They must be followed in order to avoid the repetition of the steps, steps unnecessary and causing more frustration.

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• How to play the song with .wma extension

  How to play the song with .wma extension

  If it does not DRM, use VLC. If so, no Mac OS X software can play or convert.

  (142864)

• How to fix the error with the code: 0xe7210001 failed to load powrprof, object: cls

  Hello

  Dose anyone know how to fix the error with the code: 0xe7210001, message: unable to load powrprof, object: CLSD-no-it is found;
  OR: Fingerprintsoftware OR error: replicas THotkey.exe message window and the computer freezes

  Maleware scanned and virus, also in safe mode, found no infection, reinstalled driver fingerprint, but nothing has changed.

  grateful for the help!

  Hello

  > message: unable to load powrprof, object: CLSD-no-it is found;
  In my view, this would mean that there is a problem with Toshiba Power Saver
  What laptop Toshiba, you have exactly?

  Maybe reinstall Power Saver could help. You can find it on the official website of Toshiba.

• How to have the sidebar with thumbnails by default in the application preview? Whenever I open a PDF file, there is no sidebar.

  How to have the sidebar with thumbnails by default in the application preview?

  I'm on OSX El Capitan 10.11.3 on iMac, and whenever I open a PDF file, there is no sidebar. I have to every time click on the Sidebar icon, then select the thumbnails. I would like to be on by default, but cannot find the option or how to edit the plist file...

  If the thumbnails is checked in the menu 'View' preview, it should always open a PDF file with the open sidebar. Unless of course, it's a single page PDF.