printer all in one psc 2210xi while trying to align the cartridge HP (Vista) "paper mismatch".

Similar Questions

• HP Officejet 7410xi all-in-one error message '... .align right cartridge... "

  Printer: HP Officejet 7410xi all-in-one + CD of Installation

  Computing: Dell XPS 8700

  OS: Windows 8.1

  Question:  Printer error message... Align the cartridge to the right... "The right (black) cartridge is not empty.  He worked until the middle of print job.  Place another cartridge in printing is faded to the right and dark on the left with no error message.

  What is the difficulty that these cartridges are expensive!

  Hi @xandux,

  I see by your post printing went on the right side, you tried a new cartridge and have the same results. I can help you today.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  Follow the steps is this document to see if it will help resolve faded printing.

  Missing, faded or dull colors.

  Print the self-test on the printer hardware to see if it's a hardware or software problem.

  You use genuine HP cartridges?
  What are the ink levels?

  Let me know the results of the test pages of the document.

  Good day!
  Thank you.

• printer all-in-one PSC 1315: check the ink cartridge light flashes

  the last time I printed the page came out very laboriously and slowly. The next time I turned on the print cartridge check printer is flashing. My specific request is the medium that contains the cartridges is a little loose (up and down) approximately 1/16 "or more. Is this normal? Thanks in advance for any advice...

  It is normal that there is to play in the transport. Slow printing is caused by the failure of one of your cartridges.  The document here may help address the error lights.

• I have a belkin n1 vision router and a new printer all-in-one hp Office pro 8500 has, but the

  I have a Belkin N1 Vision router and a new HP Office Pro 8500 all-in-one printer (HPA7864C), but the wireless connect. I followed the instructions of the printer, but the better report reports that "MAC filtering" is enabled to possbly (or on) on the wireless router. I checked the router, but the "MAC filtering" is set to off (or off). What could be the issue that the printer will not connect to the wireless router?

  Best report:

  Without thread - OK

  Functions without wire - OK

  Network name (SSID) has been found - OK

  Security - OK

  Print settings are OK with the settings of the router - OK

  Unfiltered - NOT OKand then it stops!

  Connection - do not run.

  Problem was solved by changing the channel 6 to 11 of the channel on the Belkin N1 router.

• Why my C410a printer all in one is leaving a black line in the middle of a scanned page?

  I use Windows 7 with my C410a all-in-one printer... and this line does appear when I print the page... it does not appear on the recorded image.

  Hello richalter.

  Please check this document.

  http://support.HP.com/us-en/document/c01622189

  Bravo!

• my printer all-in-one bother 9440cn continued to come with the printer cannot print offline can help you

  Remember - this is a public forum so never post private information such as numbers ofmail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Start, printers, right click on the brother and the selection unit online.

• Photosmart all-in-one wireless B109n - problem with detection of the cartridges

  I just bought a Photosmart all-in-one wireless B109n. implementation proceeded without problems (including printing test photo).

  When I tried to use it later, he said that the cartridges were not detected.
  Strange thing is that when I take one of 4 cartridges, it says that one is missing. After you have added the last of them, he says that none of them are detected.

  Also, I need to re - enter the language and area whenever I turn it on. As if it's reset instead of make a cut...

  How this can be solved?

  Back to the store where I got it.

  They saw the same thing I had met and gave me a new without much fuzz

  The new works very well

• Printer all-in-one HP Envy100 will not connect to the network

  HP Envy 100 D410a connects to the network even with MAC disabled on Dlink router according to the indications 'wireless network test report?  What should I do now?

  OK, everything looks good.  The firmware is updated on the router?  You've restarted the router (pull power plug temporarily)?

• Where to find an IP for hp psc 1410 printer all in one

  Hello.

  Anyone know where to find an ip address for hp psc 1410, printer all-in-one?

  Make sure you have the latest version of Adobe Flash installed.

  Adobe Flash

  Download the latest version of the software for your printer on the link below and save it to your desktop

  FTP://ftp.HP.com/pub/softlib/software10/COL11786/MP-35363-2/CDB-AmericasEuro1-Express_NB.exe

  Then download revo uninstaller on the link below and install it.

  http://www.revouninstaller.com/download-freeware-version.php

  Unplug the printer from the PC.

  Revo and see if he can find any installed printer HP software.  If so, right-click the icon of the software and choose uninstall.  During the process you may be asked to remove the registry entries.  If you are, just select and click on delete.  Do the same for any left over files and folders.  When finished, restart the PC.

  Disable any Antivirus and Antispyware software.

  Now, double-click the installer on your desktop to start the installation, the connection of the printer when you are asked.

  I hope this helps.

  Best wishes

  DP - K

• Printer all-in-one Photosmart D110: think there paper jams

  Printer all-in-one Photosmart D110: think there most of the time paper jams (the computer print or copy).  This happened for some time.  Sometimes it will print and then at other times, it will produce jam messages when there is not a jam.  I tried all the solutions of HP.

  There is a document to help walk a (real or fake) paper jam errors troubleshooting in the photosmart D110. This document can be found here.

  So I'll send more information via the Inbox of (private) messages.

• which way until I put A 4 photo paper in my 7510 HP printer all in one

  Hi, what sense until I put A 4 photo paper in my 7510 printer all-in-one with a duplex system?

  The paper must be loaded into the tray with the side to be printed facing down.  The duplex setting is not compatible with the photo paper, you can select single sided.

• Y at - it firmware to AirPrint activate my HP Photosmart C7200 series/model CC567A printer all in one

  Y at - it firmware to AirPrint activate my HP Photosmart C7200 series/model CC567A printer all-in-one?  My IPAD is not discovering the printer on my wireless system... so I think that the printer is not enabled for AirPrint.  ... or would it be a different problem?

  I need help.

  Unfortunately, there is not a firmware update to enable your printer for AirPrint. You could try the HP ePrint App for the iPad/iPhone.

  Let me know if you need help with your question. Thank you

• Example: Pavilion dv6: printer all-in-one HP PSC 2110

  I, m trying to install the printer all in one HP PSC 2110 on windows 7. Annyone has a compatible driver for this OS.

  Hi @eok001,

  Welcome to the HP Forums!

  I noticed you're wondering if there is a driver available for your printer HP PSC 2110 running on Windows 7. I'm happy to take a look for you!

  A complete printer driver of functionality for one or more versions of Windows is not available for your printer, or from the CD supplied with your printer from the HP website. To use your HP printer with a Windows computer, you must install the driver built-in. To do this, please take a look through this guide, installation of your printer using the built-in Windows driver. Otherwise, I suggest upgrading to a printer of software complete features and drivers available for Windows 7. Here, a list of printers that are compatible with Windows 7.

  I hope this information helps and thank you for posting!

  "Please click the Thumbs up icon below to thank me for having responded."

• Problems to install my printer all in one HP PSC 1350 to Yosemite mac 10.10.2

  I can't seem to install my printer all in one HP PSC 1350 Yosemite 10.10.2 Mac

  Choose my printer in the window 'Add' and 'Add' is disabled, and I get a message saying something like "there is not any software avaible for this printer." "Get in touch with the manufacturer of. But I can see this list,

  http://support.HP.com/us-en/document/c04473034

  so, I know it's true, the software he's somewhere.

  Help please.

  Thank you very much

  Hi @Nattaka

  I can help you use your PSC 1350 with your Mac running Yosemite.

  Please first reboot the Mac and printer, then download and install the HP printer drivers.

  You can now go ahead and add the printer. Please let me know if that fixes the problem, thanks.

• Printer all in one HP PSC 2175v prints the page number and the title of the document

  Printer all in one HP PSC 2175v prints the page number and the title of the document.

  This is the default value?  Can I disable this?  I would prefer to print only the document, without page numbers and the title.

  I was printing of either Wordpad specifications, using Windows XP.

  Using the front panel of the printer, I loaded the defaults of the printer, and that fixed the problem.

  Thank you