How to make a boot disk windows 7

How to make a boot disk windows 7

Hi bob 5555.

See the following article on the start-up of the installation CD:

http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

I hope this helps!

Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think

Tags: Windows

Similar Questions

  • How to make a boot disk?

    I would like to make a bootdisk in case of failure of the main drive. equipped with iMac 2009 El Capitan with a superdrive drive running.

    Grateful for any help.

    You must have a copy of the El Capitan installer that you downloaded from the App Store. Download the freeware called, DiskMaker Xutility. It allows to create an installation program bootable on USB of at least 16 GB.

  • make a boot disk

    I'm doing a startup disk, a boot disk.  I have several disks usb, 1, 2, 3 TB, or I could use a flash drive, if he stands on a 32 GB flash drive, that is.  I suppose that it wouldn't be as people online sell everywhere to help people who find it difficult to install el crapitan.  Many of them must be as one of the amazon sellers showed 4000 available: 39 left.  Ouch.  I can't el crapitan to install to save my life.  It crashes, never works.  The importance of the support of apple is suggesting that I say 'Yes' when I start, as I have to "accept" the agreement from apple before, even though I told her is not the problem, she sent me a book of instruction page three on how to start el crapitan and to proceed with the installation, you have to say yes, and you will need to acceptt their agreement.  Yes, I did.  no problem with this part.  but it's that the things she and the two girls before and both were subsequently in the same boat.  Mr President, let me send you instructions on how to download it.  "No, I say, I did.  Do you really think someone is struggling to push a button that says "download?  Obviously, Yes. because she sent me instructions, once again, no joke, on how to push the button so he can 'download '.  Complete with how to do it with your finger and how if you have a plug in the mouse, with a separate section if you have a wireless mouse.  Hell me silly.

    O.K. HELP!  El CRAPITAN won't complete the upgrade process.  Please tell me if it takes normally 8 to 12 hours on your systems.  I guess he was hanged and killed the process.  rebooted, retried... same thing.  anything after 12 hours or more.  Yes, I used the pad on my Apple Macbook Air 11 '', i7, 4 GB ram, 250 GB SSD.  I do not use a wireless mouse.  I have not used a wireless mouse.  I did no harm to press download, and after I did, it succeeded because it was changed to read "DOWNLOAD"... "If there are employees of apple here who have not... so much worse.  If you work for Apple, leave, just freaking leave I have no more time or patience for you.  Just trust me the O.K. FREAKING the COMPLETE DOWNLOAD.  O.K.?  Because it gives an error message when I tried to install from the same disk.  Then I tried to install it from a second disc, a key USB WD 3 TB.  Seems to hang.  (Tell me whether I should WAIT WAIT 15 HOURS OR MORE for the thing to check.)  Anyway, it does not work.  So I found a TON of entries, some are already selling thousands of them, for small usb thumb drives flash of various sizes, called the STARTUP disk, so...

    I guess el Crapitan must be installed on a PARTITION AMORCABLE where in the CAR.  Something that it would have been so freaking sweet if they would have SAID THAT SOMEWHERE some TIME no matter WHEN IN THE DESCRIPTION OF THE PACKAGE ON THEIR SITE.  OK, so I think I ned a diskette formatted in some way.  Me color cheap, stupid, whatever.  But rather than buy on online at Amazon, I thought how hard can it be?  I can do it.  Big mistake.  Create a disc a disc of starting, or bootable used to be in the old days an easy as pie thing...

    However the Apple support site, helps him terminal programs, man pages diskutil, the program Apple accessories disk utility supplies, NOT HAVING ANY HELP DRIVE of FILES THAT BOOK REFERENCE, START UP DISK or any combination of the same, you know... How can you, how can you do a... whatever.  nothing. isn't there.  And here, in the consumer help pages.  No messages that are either.

    It's not rocket science.  It can be done.  How to make a boot disk?  How to format a disk a bootable floppy.  or a book drive, no matter what.

    And if y ' All are Apple support staff, and if you tell me that I pressed the wrong download button or I pulled the single button in the wrong order... I take my mac to a shooting range and shooting it be shot to pieces and displaying it on iTunes.  And never, never, ever, buy a mac or an apple anything.  , so, this whole experience has soured me I could never do that either.

    What do you know?

    <Create a bootable OS x - Apple support Installer>

    <http://osxdaily.com/2015/09/30/create-os-x-el-capitan-boot-install-drive/>

  • create a boot disk windows 8

    I downloaded and upgraded to windows 8 and still have the key I bought, but did not get a disc.

    my windows 8 will not open now, and after much trying to fix differently he always repeat myself that I have to re start with the startup disk which I do not have!

    How to create a boot disk windows 8 so that I can fix my computer...

    I have a laptop with wndows 8 on it can I create one?

    Neal

    How to create an installation of Windows 8 bootable DVD using the folder of ESD
    http://www.PAGESTART.com/win8esdtodvd11041201.html
    Series of step by step instructions and screenshots on how to burn an installation of Windows 8 bootable DVD.

    If you have a folder named C:\ESD on your hard drive, you can use it to create a Windows 8 bootable installation or repair DVD.

    J W Stuart: http://www.pagestart.com

  • How to make a reformat online Windows XP?

    How to make a reformat online Windows XP?

    You cannot reformat the drive or the Partition of Windows XP while XP is running. To reformat the XP partition, you will need to insert the Windows XP installation CD and boot from the CD. One of the installation option is delete and reformat a partition.

    Warning: Reformatting will result in the loss of all your data files (Documents, Photos, music, etc.) and you also need to reinstall XP because it will be removed after reformatting.

    Is there a particular reason you want to do this?

    J W Stuart: http://www.pagestart.com

  • How to make a backup of Windows Vista on a DVD

    Original title; Windows Vista

    Hi, I have windows vista Home premium, is there anyway that I can back up the operating system on a cd dvd?

    You can use a disk imaging hard program. This will restore your computer to its state exactly when the image has been made - which will save you the trouble of having to reinstall Windows 7 and just installed currently.

    The two programs below allow you to make a boot disk to start the recovery, and the two programs allow you to split the backup on several DVD.

    Represent the Disk Imaging (free):

    http://www.Macrium.com/reflectfree.asp

    Paragon Backup & Recovery Free Edition:

    http://www.Paragon-Software.com/home/DB-Express/download.html

  • Boot disk Windows PC7-1235

    At some point, it will be my hope that HP will find the problem because this is my 4th computer in 3 weeks.

    This a #4 came direct from HP (this time) and the other 3 came Frys. The problem:

    Run it and it goes to black screen and said: diskette to boot Windows. Choose an opperating system and press ENTER.

    Returned, tonight the turned on and he crossed updating registry 400092 (updates) re started and the Windows startup disk.

    Here is the picture: (the white boot disk Windows wrote on top) the next Strip white windows 7 wrtiien on it.

    Nope, no disc in the player and this is day 2 with this computer.

    This must happen 3 other computers since July 14

    This HP one sent, thinking that maybe Frys had got a bad batch

    but you can imagine my surprise when he did today.

    With the first, I would say about 22 hrs and phone with support.

    they had me to do what they thought. then when the other arrived,

    I just re packaged and returned.

    The good folks at frys done overall upward on the 3rd, I took it to the House, that we worked for a day

    then whenever it started, he went to this screen. I called HP and they sent me to another.

    So here am I with I guess a problem this same HP cant fix. Could be a bad batch?

  • How to make a page on windows 7

    How to make a page on windows 7

    1. Press PRTSCN.

    2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

    3. In the painting, on the Home tab, in the Clipboard group, click on paste.

    4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

    5. Click on the paint button , and then click Save.

    It is also possible to capture the active window when you press PRTSCN.

    To capture an active window:

    1. Press Alt + PRTSCN.

    2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

    3. In the painting, on the Home tab, in the Clipboard group, click on paste.

    4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

    5. Click on the paint button , and then click Save.

    Notes

    • On some keyboards, PRTSCN might appear as PRTSC, print SCREEN, or a similar abbreviation.

    • Some laptops and other mobile devices that do not have a print screen button could use other combinations of keys, such as FN + Insert, to capture the screen. Check the manual that came with your laptop or device for specific instructions.

    You can also use another image editing program other then paint if you have installed.

  • How to make a USB bootable windows 7 or windows xp or any other

    How to make a USB bootable windows 7 or windows xp or any other

    tajamulfayaz

    The link below is a tool that will use a Windows ISO file and make a USB bootable for you.

    http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

  • How to make a copy of windows xp home startup disk?

    I would like to know where I can get a boot drive for Windows XP home. I have a computer that is running XP and there the BSOD and I can not even boot mode safe. I would like to do a clean install, but I don't have a boot disk.

    Hi ShadB311,

    Provide us with the information below:

    · What is the number and the model of the computer?

    · The operating system was preinstalled on the computer?

    · What is the service pack installed?

    · What is the exact error message with the error code that you receive when you try to start?

    · Do you remember any recent changes made before the show?

    New installation or repair facility is the last resort that we follow to solve the problem.

    You can buy is no longer Windows XP CD that the life cycle is complete. You can check the link below: http://support.microsoft.com/lifecycle/?LN=en-gb&C2=1173

    However, you create the startup disk, see the link below: how to get the installation discs for Windows XP for installation of boot floppies: http://support.microsoft.com/kb/310994

    With regard to:

    Samhrutha G S - Microsoft technical support.

  • How to make a basic disk Installation for Windows Vista Home Edition

    I am the 3rd owner of a Dell Latitude D410. I tried to update Windows and I get the error message (80073712). I have searched for and realize that I have to reinstall Windows because of corrupted files. The second owner has never had the installation disc and the original owner could not be found. How to make a record?  Thank you for your help.

    Hello

    you do not have to reinstall vista; you need to do a repair of your error code installation

    read this; There are 3 ways to solve this error code a repiar install being the last

    Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0 x 80073712".

    http://support.Microsoft.com/kb/957310

    and if necessary here is how to do a repair installation upgrade

    You may have to borrow a Microsoft dvd vista not an acer, HP etc. recovery disk and do a repair installation

    read the below tutorial on how to perform a repair installation

    http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

    and in regards to a relocation complete your operating system if you go to this path:

    Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

    they do it for a nominal cost of $

    http://support.Dell.com/

    and if you find that you have a recovery partition following the Dell information on the link below to reinstall:

    http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

    or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

    Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

    they contain all versions of vista

    This is the product key that determines which version of vista is installed

    http://www.theeldergeek.com/Vista/vista_clean_installation.html

    How to replace Microsoft software or hardware, order service packs and replace product manuals

    http://support.Microsoft.com/kb/326246

  • How to make a boot drive for Windows 8?

    I don't find this option anywhere in Windows 8.  I made a boot disk for every computer I've ever owned.  I would like to

    Ditto for this one.  What I can, or can I not do with Windows 8?   Thank you!

    I don't find this option anywhere in Windows 8.  I made a boot disk for every computer I've ever owned.  I would like to

    Ditto for this one.  What I can, or can I not do with Windows 8?   Thank you!

    Hello

    Press the Windows key + X to open the System Menu, and then select Control Panel.

    Set the display of icons, and select Recovery (you can also use the search to locate the recovery).

    When the component recovery starts, click on the Next button.

    The default is to create the recovery disk using a USB key. The USB device must be able to contain at least 256 MB and cannot contain other files. Insert the disc and when it is found, click on the next button and follow the instructions.

    Note:

    You will also see an option to create a repair using a CD or DVD disc.

    When you start this procedure, if your computer contains a manufacturers recovery Partition, you will see an option to copy the partition on the recovery disk. This will require more space on the device memory USB.

    Concerning

  • How to make a recovery for windows disk 8.

    Hi, I have a HP Pavilion 15. It comes without an operating system. So I buy Win8 and will do a clean install on my book. But I want to create a recovery partation which holds all the windows files and drivers etc... As a pre installed recovery partition books. I mean that if I ever need to refresh or reset my book, I can do without clean new install and use again all other media.

    Creating a system image is good idea but it will sometimes corrupt and some it delete by mistake. I search online, but everyone speaks only how to create a boot able usb recovery disc or a DVD of 253 MB. I hope that I'll find a strong solution here.

    See:

    http://www.intowindows.com/how-to-create-custom-Windows-8-refresh-PC-image/

  • How to make a recovery disk?

    I want to do system recovery on my laptop again, I lost I have original windows vista Ultimate edition

    Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

    There is no Vista free download legal available.

    Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

    Normally, they do this for a cost of $ small.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

    See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

    Normally, you have to press F10 or F11 at startup to start the recovery process...

    Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

    They will tell you how to do this.

    Every computer manufacturer has their own way of making recovery disk/s.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
    A good Vista DVD contains all versions of Vista.
    The product key determines which version of Vista is installed.

    There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

    If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

    Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

    At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

    http://support.Microsoft.com/default.aspx/KB/918884

    MS advice on the conduct of clean install.

    http://www.theeldergeekvista.com/vista_clean_installation.htm

    A tutorial on the use of a clean install

    http://www.winsupersite.com/showcase/winvista_install_03.asp

    Super Guide Windows Vista Installation

    After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

    Save all data, because it will be lost during a clean installation.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://support.Microsoft.com/default.aspx/KB/326246

    'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

    See you soon.

    Mick Murphy - Microsoft partner

  • Re: How to get a boot disk out of date?

    I was given a computor with a friend. Now, it does not illuminate and indicates that I have to get the boot disk, then press 'r '. I was on the site of Toshiba Europe and it say this serial number - 93854472G - is now obsolete. I live in New Zealand, but it was purchased in the United Kingdom. How to keep a? Or is broken for good computoer?

    Thank you
    NG

    Hello

    > Now, it does not illuminate and indicates that I have to get the boot disk, then press 'r '.
    I imagine that you area talking about console repair Win XP repair console can be started using only the MS Windows XP disc
    The Toshiba Recovery disk doesn't contain this repair console because the disc is not the same as the Microsoft Windows CD

    Luke is the recovery disk cannot be downloaded. You can order it but I m not very good if they send it to the New Zealand.

Maybe you are looking for