How to make a USB bootable windows 7 or windows xp or any other

Similar Questions

• Portege 3480CT: how to make a USB bootable floppy drive?

  I need help to make a USB bootable floppy drive.
  My laptop 3480CT has not the traditional floppy drive instead, it uses a USB floppy drive and the bios has an option to boot from USB FDD.

  I would like to use a USB key to start (a Lexar Jumpdrive 32 MB 05dch 0080 h and GTX 1 GB 1516 h pid pid 8628 h), instead of the floppy. I want to load the boot XP on floppies, so I run recovery programs using chkdsk.

  I tried the usual suspects, the bootloader makebootfat and mkbt20 HP.
  I tried the demo version of the commercial product Flashboot.
  I photographed a floppy back 5.0 system on the USB key using the I-Setup demo.
  All failed including the specific option in the makebootfat images for FDD option and 3 different options of Flashboot.

  I ran
  http://Enos.itcollege.EE/~mkalme/Pahn/tut/tut.html

  Using Hexplorer ICY, I was able to confirm that the DOS5.0 on the boot sector pendrive is identical to the diskette.
  I could start in Dos5.0 from a floppy disk with drivers USB Panasonic and confirm that my Lexar was a system of 1.44 MB disk and command.com displayed in the directory. The GXT is not recognized by the Panasonic, nor BACK USB drivers to Duse 4.4 4.9. Another worrying indicator, it is my computer XP did not see all of the files on the pendrives, not command.com, or two hidden files (view all the hidden files option).

  I learned that Transcend a specific option that creates a bootable 1.44 mb floppy
  image on their USB key.

  Here is what I have gathered, corrections and suggestions are welcome.

  Interface USB the USB protocol specifications

  bInterfaceSubClass field specifies the Protocol
  01 order reduced block (RBC) a flash device
  UFI 04 a floppy drive floppy drive
  05 FDD SFF-8070i SFF-8070i command blocks however, funding may be in a different subclass for example RBC

  bInterfaceProtocol field specifies the transport protocol
  00 control/Bulk/Interrupt (CBI) with break of completion for FFD only
  01 CBI without interruption of completion for the FDD only
  transport in bulk only 50 h, including priming

  I don't know if the USB controller must imitate the FDD Protocol.

  Any ideas?

  Hello

  You cannot boot from the USB key.
  The BIOS of the laptop does not support something like that.
  Laptop factory supports and use different BIOS versions. As far as I know on this laptop Toshiba BIOS was installed.

  To my knowledge this BIOS does not support booting from the USB key, but only the HDD, ODD, LAN or USB - FDD.
  If you want to boot from USB FDD, you can create a bootable FDD floppy.
  Windows operating system creates the boot floppy drive when you right click on the connected floppy drive and select format. Then simply choose the option create MS-DOS startup disk start.

• How to make a USB bootable rKill and manage to get a copy of a Windows Vista repair disc?

  I had a Trojan horse, don't know what kind of Trojan horse, but a Trojan none-the-less. Now I would like to repair vista, like you used to be able to repair XP with a disc. First of all, I would like to remove completely all the malware from my computer, BUT, I need rKill to kill all processes that can be associated viruses.

  So, nobody knows how to create a disk bootable rKill (that there not using Solution Explorer, the [portable] mouse pad)
  Also I need a copy of the ERD for vista please, don't know where to find one, but it would be nice to have one standby.
  Thank you.

  Hello

  the way XP to do a repair installation by booting from the disc does not apply to Vista

  a vista repair install is done from within a vista operating system

  and to do a repair installation, you must borrow a DVD of Vista to Microsoft, not an Acer, Dell, etc. recovery disk

  read the below tutorial on how to do a Vista repair install

  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Here's how to do a startup repair disk; There is NOT a disk of resettlement:

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and for any question regarding rkill, post the link below because it is their product:

  http://www.bleepingcomputer.com/forums/topic308364.html

  How to reinstall Vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to create a USB bootable Windows XP to reinstall Windows?

  The blue screen of death - I need to re - install XP Home.

  There is a download to diskette available but is there a download to a memory/usb stick?

  There is a download to diskette available but is there a download to a memory/usb stick?

  If these are the disks you are referring to:
  How to get the installation discs for Windows XP for installation of boot floppies Those who are not complete installation Windows XP...

  You still need a CD Windows XP Home edition - which should be bootable.  The disks are machines which cannot BOOT from CD - and these machines probably aren't going to boot from USB.  ;-)

• How to make a USB bootable for HP Mini 1116RN?

  I have a netbook HP Mini 1000 or HP Mini 1116NR. It displays the options of f10 and f9 and that's it. I know I have to reconfigure the USB but I don't know to what or what file to put it in the USB port. What I want to do, it's the laptop restore to the factory settings. There are two options on the black screen and the first does not work it says disc error. The second it starts but it keeps loading. I don' t have the disk for setting and the laptop does not have a disk drive.

  Hello

  I suggest that you contact HP support to better support on the issue.

• USB bootable Windows 8 Pro key

  Hi I upgraded to Windows 7 Windows 8 Pro.

  But after everything, I noticed there was a lot of files and programs that I wanted to get rid of so I decided to install a copy clean od Windows 8 Pro and format my hard drive. How to create a USB bootable Windows 8 Pro copy?
  Thank you

  See here:

  Create your own:

  http://Windows.Microsoft.com/en-GB/Windows-8/upgrade-product-key-only

  then:

  http://techingiteasy.WordPress.com/2012/11/07/part-2-How-to-upgrade-using-the-Windows-8-Upgrade-Assistant/

• I need to make a usb bootable for windows 8.

  Bootsect.exe

  I can't download the bootsect.exe from the store.  Only get the file iso32 integer or an image file or download... Manager what is the problem?  I need to make a usb bootable for windows 8.  I am running windows 7 32 bit.  What's wrong with the instructions for download

  Go to the Microsoft Store website, sign in with your bank account, select Download Options and select Windows 7 64 bit and proceed to download.

  1. connect to your Microsoft Store account to view your purchase history

  2. search for your purchase of Windows 7.

  3. next to Windows 7, there is a drop-down list "additional download options.

  4. in the drop-down menu, select "32-bit ISO."

  5. right click on the link and then save the bootsect.exe file to the location where you installed the Windows 7 USB/DVD Download Tool (for example C:\Users\username\AppData\Local\Apps\Windows 7 USB DVD Download Tool).

  6. once the file has been saved, return to the Windows 7 USB/DVD Download tool to create your bootable USB device.

  or

  (1) download and install the Windows 7 USB/DVD Download Tool program, as described on the Microsoft Store website.

  (2) download a 32-bit version of bootsect.exe work. Here is a link to the 32 bit bootsect.exe:
  http://www.SevenForums.com/attachments/installation-setup/47060d1263222191-32-bit-Bootsect-bootsect7600x86.zip
  From: http://www.sevenforums.com/installation-setup/54443-32-bit-bootsect.html

  (3) once downloaded, copy the BootSect.exe file in the same folder that contains the file Windows7-USB-DVD-Download - Tool.exe installed. This file in Windows Vista's default installation directory is C:\Users\USERNAME\AppData\Local\Apps\Windows 7 USB DVD Download Tool\ (you need to look in XP)

  (4) application of the Windows 7 USB/DVD download tool as indicated on the web site of Microsoft Store. The end result will give you a boot USB flash drive that contains everything you need to install the 64 bit version of Windows 7.

• Files do not automatically load on USB bootable windows 7.

  Original title: Windows 7 usb problem.

  I prepare the USB bootable windows 7 when I pluged in the usb (press any key to continue) do not come and the files load automatically?

  Hello

  Have you changed the boot order to be able to boot from USB?

  • When ready to install Windows 7 from USB key:
    • Connect the USB.
    • Restart the computer and continue to touch the F button (see screenshot below) Manager to open the screen Menu starting for the brand and the model of your motherboard or your computer until it does.
      • 
    • Select the USB stick to boot from.
    • Start the installation of Windows 7.

  And that's how you did your USB key?

  You download the correct ISO file and make your own drive and use the product key located on the COA sticker. Download the correct ISO file and make your own drive and use the product key located on the COA sticker.

  http://www.w7forums.com/threads/official-Windows-7-SP1-ISO-image-downloads.12325/page-2#post-124821

  Using the method of USB in conjunction with the Windows 7 download preceding:

  http://www.SevenForums.com/tutorials/2432-USB-Windows-7-installation-key-drive-create.html

  "How to get and use the Windows 7 USB/DVD Download Tool"

  http://www.SevenForums.com/tutorials/31541-Windows-7-USB-DVD-download-tool.html

  See you soon.

• How to make a boot disk windows 7

  How to make a boot disk windows 7

  Hi bob 5555.

  See the following article on the start-up of the installation CD:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to make a reformat online Windows XP?

  How to make a reformat online Windows XP?

  You cannot reformat the drive or the Partition of Windows XP while XP is running. To reformat the XP partition, you will need to insert the Windows XP installation CD and boot from the CD. One of the installation option is delete and reformat a partition.

  Warning: Reformatting will result in the loss of all your data files (Documents, Photos, music, etc.) and you also need to reinstall XP because it will be removed after reformatting.

  Is there a particular reason you want to do this?

  J W Stuart: http://www.pagestart.com

• How to make a page on windows 7

  How to make a page on windows 7

  1. Press PRTSCN.

  2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

  3. In the painting, on the Home tab, in the Clipboard group, click on paste.

  4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

  5. Click on the paint button , and then click Save.

  It is also possible to capture the active window when you press PRTSCN.

  To capture an active window:

  1. Press Alt + PRTSCN.

  2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

  3. In the painting, on the Home tab, in the Clipboard group, click on paste.

  4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

  5. Click on the paint button , and then click Save.

  Notes

  • On some keyboards, PRTSCN might appear as PRTSC, print SCREEN, or a similar abbreviation.

  • Some laptops and other mobile devices that do not have a print screen button could use other combinations of keys, such as FN + Insert, to capture the screen. Check the manual that came with your laptop or device for specific instructions.

  You can also use another image editing program other then paint if you have installed.

• How to make a USB stick into a bootable image

  I did a complete reinstall of windows xp to sp3

  I'm doing a usb key that will start a linux system

  usb in question has been used before on a windows vista and windows 7 and starting machine

  Why can I not make an usb device bootable on windows xp machine work?

  The problem is probably not the key USB but the BIOS that is loaded onto your computer motherboard.  When Windows XP came out, USB was relatively new and had not reached the sophistication to address such opportunities that boot from USB.  Things have changed a bit since then and newer machines have no problem using USB as a bootable media.  Your only chance would probably be to see if there is an updated BIOS available for your machine.  You can check your manufacturer's Web site or the Web site of the manufacturer of your motherboard to see if one is available.  Do your homework and proceed with caution because an installation or an update of the BIOS failed can easily turn your computer into a boat anchor.

  You can consider using a Linux boot CD instead of the USB key for this computer.

  HTH,
  JW

• How to make the disc Bootable to Windows 8

  Hello

  I just bought a DELL Inspiron 17R laptop computer which came with Windows 8. I need to make a disk Bootable to Windows 8 so that I can install my old windows 7 first and dual boot Windows 8

  I need Windows 7 very badly as my Unigraphics NX works on Windows 7

  How can I do?

  Is it possible to download windows 8? (As I already have a product key)

  Thanks in advance

  Hari

  See the following topics:

  http://en.community.Dell.com/support-forums/software-OS/f/4677/p/19471699/20208507.aspx

  With Windows 8, Microsoft changed stickers that have the product key that the user must type in during the installation of the operating system of new embedded BIOS product key. The idea is that by eliminating the tile, you eliminate one of the easiest ways for nefarious users get a legitimate product key. The sticker also eliminating product key removes any concern that the vignette could get damaged while at the same time eliminating the long and irritating the process of typing in various letters and numbers in the installation of the operating system.

  If the user has to reinstall the operating system on a computer with Windows 8, the installation process automatically captures key software product of the motherboard BIOS without input from the user. This means that these stickers familiar windows product key will no longer appear on Windows 8 computers.

  ---------------------------------------------

• How do I go back & make the USB bootable or find a product key?

  I did the USB bootable to my netbook which has windows 7 starter edition for which I have a product key for. no option came to the choice except windows 7 Professional. so I chose the upgrade now I don't have a key for professionals

  Where have you bought the license for Windows 7 Professional?

  Find your key product if your purchase of Microsoft Store:
  http://store.Microsoft.com/Help/FAQ?Err=T2#AT2

  Contact the Microsoft store:
  US: http://www.store.microsoft.com/Help/Contact-Us
  1-877-696-7786
  Canada: https://www.microsoftstore.ca/shop/en-CA/Contact-Us

• I m ussing Windows 7 x 64 and I got the error of bootsect making USB bootable Windows 7 x 64

  Hi, I had a problem of decisions and windows 7 x 64 bootable usb, I use Windows 7 USB/DVD tool and I use Windows 7 x 64, but when I use the software I have the rare and the bootsect error is that I use Windows 7 x 64.

  I have download the bootsect.exe file and the problem is solved, but which does not happened before.

  I appreciate the help in this question I have.

  Sorry for my English

  Hi Erick,.

  You can read these articles and check if this helps you to learn more.

  How do I create a bootable usb drive with an iso image of Windows 7?: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-create-a-bootable-usb-drive-with-an-iso/50b34677-8584-47da-a05d-59c182eeb7a2?msgId=f05e8eb1-2af0-4e16-9e7a-70557b046dee

  How can I make a bootable Windows 7 flash drive usb? : http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/how-do-i-make-a-bootable-windows-7-usb-flash-drive/24f499cc-7735-44d8-a8fa-324c13077977

  Bootsec errors when configuring a bootable usb key: http://social.technet.microsoft.com/Forums/en-US/W8ITProPreRel/thread/eaef2ea4-306f-4c8e-adf0-ac285e341b9b/

  Let us know if you need assistance with any Windows problem. We will be happy to help you.