How to make a laptop catalog between two PC?

Similar Questions

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Please tell me how to make my laptop and printer work together. I have Windows XP and a series of HP Office Jet Pro K8600

  Please tell me how to make my laptop and my printer work together.  I have Windows XP and a HP Office Jet Pro K8600 Series

  The printer is turned on, power works fine, the paper is in the machine, not jams, computer is very good, I'm just not getting no response from the printer

  Hello

  Uninstall the printer, and then reinstall it by using the latest drivers from HP.

  You will find also find on the site of HP troubleshooting steps, once you enter your printer model number.

  http://WWW8.HP.com/us/en/support-drivers.html

  See you soon.

• How to remove the white space between two response reports

  How to remove the white space between two response reports
  
  In the section of dashboard, I have 2 rqeuest. Each query returns Table view. When I view the dashboard, it shows a blank separating 2 table views. How can I get rid of the band of white/white space?

  See this link

  Re: Remove the space between the two reports on the dashboard page OBIEE Section

  Kind regards
  Sandeep

• How to use the same control between two forms of Visual Basic 6?

  I have two forms and must share text between two controls forms such that I get a value in the text box in Form-A should update the same value in the text box in Form-B...

  Is this possible? If so, how can I apply it in my project?
  I tried to create a control array, but that did not help.

  Hello

  I suggest you to ask your question in the Visual Basic forum: http://social.msdn.microsoft.com/Forums/en-US/vbgeneral/threads

  Thank you.

• Illustrator CS3: How to calculate the exact distance between two points?

  It comes to my line.

  

  I have to measure its exact length. How can I do?
  If I use the measure tool, the cursor does not select the snap points, so I have only an approximate measure.
  Is there a quick way to calculate the exact distance between two points?

  Flying document Info Palette menu: turn on the SelectionOnly and objects. The palette will show you the length.

  JET

• How to remove the extra space between two Table HTML

  Hello
  
  I wrote a code for printing costs. But there is more space between two Table Html, how I can remove it.
  
  Please run that Code
  
  Start
  
  HTP.p (')
  < html >
  (< body > ');
  
  HTP.p (')
  < TABLE align = "left" width = "500" cellspacing = "0" cellpadding = "0" border = "1" >
  < tr > < td align = 'right' white-space: nowrap; > Ph-2201751 < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > < B > < table > < /B > SATYAM MODERN PUBLIC SCHOOL
  < td > < table >
  < /tr >
  < b >
  < td align = "center" white-space: nowrap; > < i > < H3 > (AFFILIATED to THE CBSC, NEW DELHI CODE No. 53544) < / H3 > < /I > < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > new colony Braham, - 131001 (h) < table >
  < td > < table >
  < /tr >
  < tr > < td align = "center" white-space: nowrap; > RECEPTION COSTS < table >
  < td > < table >
  < /tr >
  < /table >
  < TABLE width = "500" cellspacing = "0" cellpadding = "0" border = "1" >
  < b >
  < td width = "100" white-space: nowrap; > receipt no.: < table >
  < td width = "100" white-space: nowrap; > Date received: < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > name: < table >
  < td width = "100" white-space: nowrap; > father name: < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > class & s: < table >
  < td width = "100" white-space: nowrap; > A/C No. : < table >
  < /tr >
  < b >
  < td width = "100" white-space: nowrap; > from: < table >
  < td width = "100" white-space: nowrap; > to: < table >
  < /tr >
  
  (< /table > ');
  HTP.p (')
  < / body >
  (< / html > ');
  end;
  
  
  Thank you
  
  Ed

  Hello

  HTML is valid, that your code print?

  Wouldn't be as below?

  BR, Jari

  Published by: jarola on December 18, 2009 15:22
  I test your code
  http://Apex.Oracle.com/pls/OTN/f?p=40323:25
  I can't see any extra space between the tables

• How to share files and images between two users on the same computer?

  I am running as admin on my computer and I made a separate user for my girlfriend, but I don't know how to make so that it can access the photos I have on my user of its user. I tried to just copy the files from my user him, but which seems to make another copy files. This will be inevitably a little space and so I would like to know if I could just have one, single, copying a file that we have access to our users.

  Also, should I make another user for myself and leave the administrator for emergency purposes? I read something on ot that need to use an administrator account for daily purposes, and it is safer just have on the contrary another user with administrator privileges.

  Make a folder on the drive, something like C:\Pictures and then right-click > properties > Security and make sure that the user has full control

  Yes to the creation of a normal user account and leaving the admin account for administrative purposes.

  I hope this helps.

• How to make your laptop a wifi device

  Hello

  I have inspiron n5010 laptop with card dell wireless 1501. I use a wired broadband for internet.is there anyway I can make my laptop a wifi device so that I can connect my laptop with internet with wifi

  Hi aamerpk,

  Yes, the 1501 wireless card is capable of generating signals wireless mobile devices; You must install a software that converts the signals into mobile hotspot.

  There are free and paid software available online, controls this links:

  http://bit.LY/XlXY9S

  http://bit.LY/WA7vOu

  Note: This is a third party site, the site may have its own terms and conditions and there could be no warranties for the software. However try to install if necessary.

  Please answer for additional help.

• How grep connectors in a group, between two words required?

  Must catch some connectors between two words in a very comprehensive document.

  1 Joanna of Smith

  2 Felicitas of the Tour

  3 Perpetua is Beatrice Kennedy

  but the solution is very poor resolved in three steps and it seems to be just one channel.

  {1 < \u\l{2,}of (\u\l{2,})+\ >)

  {2 < \u\l{2,} Delcourt (\u\l{2,})+\ >)

  {3 < \u\l{2,}y (\u\l{2,})+\ >)
  

  Try this one:

  ((? \u\l+)+((de) (la)? | y) (\u\l+)+)

  It seemed to work when I tested it on your sample.

• Laptop: how to make my laptop for one SSD

  Hey everybody,

  I would spend my hard drive of the laptop to an SSD, what are some of the things that I should look for to upgrade successfully, and this may affect my 10 Windows license?

  Thank you

  Bill

  For some people, upgrade a laptop to an SSD can be like diving into the deep end of a pool.

  An SSD upgrade may involve extensive disassembly of your laptop, depending on the model.

  Some models have hard disks that are easier to access than others.

  There are the small, but important detail involving accepting the risk of damaging your computer laptop and breach of warranty.

  You will need to decide if you want to migrate your operating system to the new SSD or perform a new installation of Windows.

  If you have already upgraded the operating system of the Windows 10 laptop, your laptop will have a digital entitlement on license of Windows servers.

  It's the new Microsoft license model that makes a continuous activation of the operating system.

  As part of the installation where you see a box to put the 25 character license activation key, there is a link below that says, I don't have a key.

  

  That's what you need to click to continue installation.

  The type of SSD that will be compatible with your laptop depends on some things.

  The first is how your laptop comes to market.

  The second is that your laptop is an entry level or a top model with advanced features.

  The third is based on these interfaces on the card system of your laptop.

  Your laptop may have only SATA ports or it may also have an m2 or a mini PCIe connector.

  Older notebooks (before 2009) will have only 2.5 possible SATA SSD products as an SSD upgrade option.

  It is also dependent on the interface this SSD on your laptop system board and the type of memory and the controller from that your laptop is compatible.

  Which can be determined in several ways.

  The easiest way I know is to take the guesswork out of the purchase of upgrade.

  Which can be done using the information for one SSD manufacturer whose reputation is based on the provision of accurate information to potential customers.

  Check online on the Web from Crucial.com website to see what they offer as guaranteed products compatible SSD for your notebook.

  With the newer models which are eventually provided with SSD, the Maintenance and Service of Guide disks for each laptop will usually specify what memory and type of SSD drive is compatible.

  The Service Guide which has this information and maintenance lies in the support for your laptop computer portal in the section user guide.

  Use the product number of your laptop + support as keywords in a Google or other search engine search for the portal.

  Memory Crucial site is a great place to find compatible SSD products for your laptop.

  http://www.crucial.com/

  Should what brand of SSD I consider? Take a look at the following article.

  http://thewirecutter.com/reviews/best-SSDS/

  Types of memory SSD
  https://HiTech-us.com/articles/entry/241/SSD-memory-types.-what-to-choose

  Some portable model year 2015 and current high-end and ultrabooks are compatible with SSD NVMe m2.

  They are currently the fastest type of the available SSD.

  This is the, M.2 compatible computers laptops HP lists to third party sites.

  http://laptopmedia.com/laptop-m-2-ngff-SSD-compatibility-list/

  http://www.mydigitaldiscount.com/m.2-ngff-SSD-compatibility-list.html

  The following URL is a list of laptops compatible with mSATA SSDs.http://www.mydigitaldiscount.com/msata-ssd-compatability-list.html#HP-laptop

  Cloning utilities, such as the magician of Samsung, From Paragon Software migration OS 4.0 SSD and EZ GIG IV of apricot you will reduce the volume on the disk inherited to fit on your new SSD.

  USB cable to SATA 2.5 "SATA SSD

  

  You may be one of the lucky ones who installed the SSD and boots for the installer and everything is going as planned.

  Otherwise, it may not be recognized by the installer of Windows or the BIOS.

  Often, an SSD should be prepared before use.

  Many members frustrated author here threads in the forums after having this experience.

  Hold down the Windows key and press the X key.

  Who calls on a menu.

  Choose command-line (Admin).

  Type DiskPart and press to enter.

  Who calls the DiskPart utility.

  After the SSD has been prepared and installation began, the Windows Installer will change the drive letter to C: on its own.

  In the image below, the disks 2 and 3 are Samsung m2 NVMe SSD.

  Some laptops 17 inches come with more than one disk.

  Select the disk and using the command list is very important. If not, you could erase the content and the partitions of the disk with the clean command wrong.

  If the SSD has a GPT partition and a drive letter is assigned, it will be recognized by Windows install.

  

  Once the SSD has been established, you can start at your choice of media for a clean install, cloning of the OS migration or a resumption of the plant initiated by the use of the recovery media, that you created.

  Since 2012, computers laptops were shipped with BIOS, UEFI and GPT partitioned the disk rather than the old BIOS and MBR partition style.

  This means that you are using Windows install must also be to format GPT UEFI.

  There are free utilities available, such as RUFUS, which can be used with ISO created by Media 10 Microsoft Windows creation tool to create an installer of 10 Windows USB UEFI.

  For other versions of Windows RUFUS can also be used to create the type of installer of your choice.

  Cloning of your SSD for a Samsung 950 m2 Pro NVMe SSD using the software of Samsung Migration

• How to make a usb connection between 2 computers.

  I have a son with two heads identical usb in, and I want to make a connection between 2 computers.

  With just a single cable with standard USB plugs on each end, none.  Is not possible.

• How to share a LR catalog between computers?

  Hello!

  I installed on an iMac and a MBP from LR.  Is it possible to download my pictures and catalog (including amendments) on a cloud to access it from two computers?

  Thank you!!

  No, this is not possible. Lightroom requires the catalog to exist on a hard drive (internal or external) that is directly connected to the computer running Lightroom. The best way to share images between computers would be to have the catalog and images on an external hard drive, they can be moved between computers.

• How to make the Apache configuration for two different areas

  Hello
  
  I was trying just a few clustering on weblogic workshop. I was facing a problem... Here's the scenario:
  
  I have two clusters:
  
  CLUSTER1: 3 managed servers (server1, server2, serveur3)
  Cluster2: 2managed servers (server4, Server5)
  
  I have two examples of applications I have made on these two clusters i.e on cluster1 app1 and app2 on cluster2.
  
  These two applications are deployed all as I am able to open these browser applications by calling the individual run as server port: http://localhost:7003 / app1.
  
  Now, I have installed an apache server on my laptop and configured the http.conf file.
  
  
  Question: I am not able to call the application of apache. If there is only a single cluster then it works very well and for an application two that a single cluster (application) only works too which port is set in the last.
  
  Here are the contents of my httpd.conf file:
  
  #
  # This is the main Apache HTTP server configuration file. It contains the
  configuration directives # that give the server its instructions.
  # See < URL: http://httpd.apache.org/docs/2.2 > for more information.
  # See especially
  # < URL: http://httpd.apache.org/docs/2.2/mod/directives.html >
  # for an analysis of each configuration directive.
  #
  # Do NOT simply read the instructions here without understanding
  # what they do. They are there only as advice or reminders. If you do not know
  # consult the online documentation. You have been warned.
  #
  # Configuration and logfile names: If the file names that you specify for a lot
  number of files in server control begin by "/" (or "drive: / 'for Win32 '), the
  # server uses this explicit path. If the file names do not start
  # with "/", the value of ServerRoot directive is preceded by - so "logs/foo.log.
  # with ServerRoot set to "C:/Program Files/Apache Software Foundation/Apache2. 2' will be interpreted by the
  # Server as "C:/Program Files/Apache Software Foundation/Apache2.2/logs/foo.log".
  #
  # NOTE: Where file names are specified, you must use forward slashes
  # instead of backslashes (e.g. "c:/apache" instead of "c:\apache").
  # If a drive letter is omitted, the drive on which httpd.exe is located
  # will be used by default. It is recommended that you always provide
  # an explicit drive letter in absolute paths to avoid confusion.
  
  #
  # ServerRoot: The top of the directory under which the server tree
  # configuration, error and the log files are kept.
  #
  # Do not add a bar slash at the end of the directory path. If you point
  # ServerRoot to non-local disk, remember to point the LockFile directive
  # to a local disk. If you want to share the same multiple ServerRoot
  demons of # httpd, you will need to change at least the LockFile and PidFile.
  #
  ServerRoot "C:/Program Files/Apache Software Foundation/Apache2. 2. "
  
  #
  # Listen: Allows you to bind Apache to specific IP addresses and/or
  ports #, instead of the default value. See also the < VirtualHost >
  directive #.
  #
  # Change this to listen on specific IP addresses below for
  # prevent Apache glomming on all related IP addresses.
  #
  #Listen 12.34.56.78:80
  Listen 80
  
  #
  # Dynamic Shared Object (DSO) Support
  #
  # To be able to use the features of a module that was built as a DSO you
  # duty place corresponding 'LoadModule' lines at this location until the
  # the directives that it contained are actually available before their use.
  # Modules statically compiled (those listed by "httpd-l") is not necessary
  # to be responsible here.
  #
  # Example:
  # LoadModule foo_module modules/mod_foo.so
  #
  LoadModule modules/mod_actions.so actions_module
  LoadModule alias_module modules/mod_alias.so
  LoadModule modules/mod_asis.so asis_module
  LoadModule auth_basic_module modules/mod_auth_basic.so
  #LoadModule auth_digest_module modules/mod_auth_digest.so
  #LoadModule authn_alias_module modules/mod_authn_alias.so
  #LoadModule authn_anon_module modules/mod_authn_anon.so
  #LoadModule authn_dbd_module modules/mod_authn_dbd.so
  #LoadModule authn_dbm_module modules/mod_authn_dbm.so
  LoadModule modules/mod_authn_default.so authn_default_module
  LoadModule authn_file_module modules/mod_authn_file.so
  #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
  #LoadModule authz_dbm_module modules/mod_authz_dbm.so
  LoadModule modules/mod_authz_default.so authz_default_module
  LoadModule modules/mod_authz_groupfile.so authz_groupfile_module
  LoadModule modules/mod_authz_host.so authz_host_module
  #LoadModule authz_owner_module modules/mod_authz_owner.so
  LoadModule modules/mod_authz_user.so authz_user_module
  LoadModule autoindex_module modules/mod_autoindex.so
  #LoadModule cache_module modules/mod_cache.so
  #LoadModule cern_meta_module modules/mod_cern_meta.so
  LoadModule modules/mod_cgi.so cgi_module
  #LoadModule charset_lite_module modules/mod_charset_lite.so
  #LoadModule dav_module modules/mod_dav.so
  #LoadModule dav_fs_module modules/mod_dav_fs.so
  #LoadModule dav_lock_module modules/mod_dav_lock.so
  #LoadModule dbd_module modules/mod_dbd.so
  Modules/mod_deflate.so deflate_module #LoadModule
  LoadModule modules/mod_dir.so dir_module
  #LoadModule disk_cache_module modules/mod_disk_cache.so
  #LoadModule dumpio_module modules/mod_dumpio.so
  LoadModule env_module modules/mod_env.so
  #LoadModule modules/mod_expires.so expires_module
  #LoadModule ext_filter_module modules/mod_ext_filter.so
  #LoadModule file_cache_module modules/mod_file_cache.so
  #LoadModule filter_module modules/mod_filter.so
  #LoadModule modules/mod_headers.so headers_module
  #LoadModule ident_module modules/mod_ident.so
  #LoadModule imagemap_module modules/mod_imagemap.so
  LoadModule modules/mod_include.so include_module
  #LoadModule info_module modules/mod_info.so
  LoadModule modules/mod_isapi.so isapi_module
  #LoadModule ldap_module modules/mod_ldap.so
  #LoadModule logio_module modules/mod_logio.so
  LoadModule log_config_module modules/mod_log_config.so
  #LoadModule log_forensic_module modules/mod_log_forensic.so
  #LoadModule mem_cache_module modules/mod_mem_cache.so
  LoadModule mime_module modules/mod_mime.so
  #LoadModule mime_magic_module modules/mod_mime_magic.so
  LoadModule negotiation_module modules/mod_negotiation.so
  #LoadModule modules/mod_proxy.so proxy_module
  #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
  Proxy_balancer_module modules/mod_proxy_balancer.so #LoadModule
  Modules/mod_proxy_connect.so proxy_connect_module #LoadModule
  Proxy_ftp_module modules/mod_proxy_ftp.so #LoadModule
  Modules/mod_proxy_http.so proxy_http_module #LoadModule
  #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
  #LoadModule reqtimeout_module modules/mod_reqtimeout.so
  #LoadModule rewrite_module modules/mod_rewrite.so
  LoadModule setenvif_module modules/mod_setenvif.so
  Modules/mod_speling.so speling_module #LoadModule
  Modules/mod_ssl.so ssl_module #LoadModule
  #LoadModule modules/mod_status.so status_module
  #LoadModule substitute_module modules/mod_substitute.so
  #LoadModule unique_id_module modules/mod_unique_id.so
  #LoadModule userdir_module modules/mod_userdir.so
  #LoadModule usertrack_module modules/mod_usertrack.so
  #LoadModule version_module modules/mod_version.so
  #LoadModule vhost_alias_module modules/mod_vhost_alias.so
  LoadModule modules/mod_wl.so weblogic_module
  
  
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  * < IfModule mod_weblogic.c > *.
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  * < / IfModule > *.
  * < location /weblogic > *.
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  * < / location >. *
  
  
  < IfModule! mpm_netware_module >
  < IfModule! mpm_winnt_module >
  #
  # If you want httpd to run as a different user or group, you must run
  # httpd as root initially and it will pass.
  #
  # Group / user: the name (or #number) of the user/group to run httpd as.
  # It is generally advisable to create a dedicated and aggregatable for user
  # httpd, as with most system services are running.
  #
  Demon of the user
  Daemon group
  
  < / IfModule >
  < / IfModule >
  
  Server configuration # 'hand '.
  #
  # The directives in this section implement the values used by the 'hand '.
  # Server, which meets all demands that are not managed by a
  definition of # < VirtualHost >. These values also provide defaults for
  # all < VirtualHost > containers you can set later in the file.
  #
  # All these directives may appear inside containers < VirtualHost >,.
  # in which case the value default parameters will be substituted for the
  virtual host of # being defined.
  #
  
  #
  # ServerAdmin: Your address, where problems with the server should be
  # e-mail. This address appears on some generated by the page server, such
  # as error documents. for example [email protected]
  #
  ServerAdmin < adminurl >
  #
  # ServerName gives the name and the port used by the server to identify itself.
  # This can often be determined automatically, but we recommend that you specify
  # explicitly to avoid problems during startup.
  #
  # If your host doesn't have a registered DNS name, enter its IP address here.
  #
  #ServerName < servername >
  # DocumentRoot: The directory you are going to use your
  documents #. By default, all requests are taken from this directory, but
  aliases and symlinks # can be used to point to other locations.
  #
  DocumentRoot "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs".
  
  #
  # Each directory that Apache has access can be configured in respect
  # to which services and features are allowed and/or disabled in this
  # Directory (and its subdirectories).
  #
  # Everything first, we configure the 'default' to be a very restrictive of game
  features #.
  #
  < directory / >
  Options FollowSymLinks
  AllowOverride None
  Order deny, allow
  Refuse to all the
  < / Book >
  
  #
  # Note that, from this point forward you must precisely enable
  features special # to be enabled - so if something doesn't work not as
  # you might expect, make sure that you have specifically enabled it
  # below.
  #
  
  #
  # This should be replaced by what you set DocumentRoot.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/htdocs" >
  #
  # Possible values for the Options directive are "None", "All."
  # or any combination of:
  # Indexes includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
  #
  # Note that "MultiViews" must be named explicitly -'all Options '.
  # is not give it to you.
  #
  # The Options directive is complex and important. Please see
  # http://httpd.apache.org/docs/2.2/mod/core.html#options
  # For more information.
  #
  Options Indexes FollowSymLinks
  
  #
  # AllowOverride controls what directives may be placed in .htaccess files.
  # It can be 'All', 'None', or any combination of key words:
  # Options FileInfo AuthConfig Limit
  #
  AllowOverride None
  
  #
  # Controls who can get stuff from this server.
  #
  Order allow, deny
  Allow all the
  
  < / Book >
  
  #
  # DirectoryIndex: sets the file Apache will serve if a directory
  # is requested.
  #
  < IfModule dir_module >
  DirectoryIndex index.html
  < / IfModule >
  
  #
  # The following lines prevent the .htaccess and .htpasswd files to be
  # seen by customers of the Web.
  #
  < FilesMatch "^ \.ht" > "".
  Order allow, deny
  Refuse to all the
  Meet all
  < / FilesMatch >
  
  #
  # ErrorLog: The location of the error log file.
  # If you do not specify an ErrorLog directive in a < VirtualHost >
  # container, error messages related to this virtual host will be
  # logged here. If you do define a for a < VirtualHost > error log
  container of #, that host errors will be logged there and not here.
  #
  ErrorLog logs / 'error.log '.
  
  #
  # LogLevel: Control the number of messages in the error_log.
  # Possible values include: debug, info, notice, warn, error, crit,.
  # emerg, alert.
  #
  LogLevel warn
  
  < IfModule log_config_module >
  #
  # The following directives define some nicknames format for use with
  # a directive CustomLog (see below).
  #
  "LogFormat '%%u %t \"%r\ hour' % > s \"%{Referer}i\ %b" \"%{User-Agent}i\" "handset"
  "LogFormat '%%u %t \"%r\ hour' % > s %b "commune
  
  < IfModule logio_module >
  # You must enable mod_logio.c use %I and frequency
  "" LogFormat '%%u %t \"%r\ hour' % > s %b \"%{Referer}i\ "\"%{User-Agent}i\ "%I %o "combinedio
  < / IfModule >
  
  #
  # The location and format of the access (Common Log Format) log file.
  # If you do not have any logfiles access set in a < VirtualHost >
  container of #, they will be saved here. On the other hand, if you the do
  # define per - < VirtualHost > access logfiles, transactions will be
  # logged there and not in this file.
  #
  Common CustomLog "logs/access.log.
  
  #
  # If you prefer a log file of access, agent, and referer information
  # (Combined logfile format) you can use the following directive.
  #
  #CustomLog "logs/access.log' combined
  < / IfModule >
  
  < IfModule alias_module >
  #
  # Redirect: Allows to tell clients the documents used for
  # exist in your server's namespace, but no more. The customer
  # make a new request for the document at its new location.
  # Example:
  # Redirect permanent/foo http:// < url >/bar
  
  #
  # Alias: Maps web paths into paths of file system and is used to
  # access content that don't live under the DocumentRoot directive.
  # Example:
  # Alias /webpath/full/filesystem/path
  #
  # If you include a trailing / on /webpath, then the server will be
  # require that he be present in the URL. It is also likely that
  # duty provide a < Directory > section to allow access to
  # the path to the file system.
  
  #
  # ScriptAlias: This controls which directories contain server scripts.
  # ScriptAliases are essentially the same as assumed names, except that
  # documents in the target directory are treated as applications and
  # executed by the server on demand, rather than as documents sent to the
  client of #. The same regulation on flight "/" applies to the ScriptAlias
  # as for the Alias directives.
  #
  ScriptAlias/cgi-bin / "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin/".
  
  < / IfModule >
  
  < IfModule cgid_module >
  #
  # ScriptSock: On threaded servers, refers to the access path to the UNIX
  decision # used to communicate with the CGI mod_cgid daemon.
  #
  Newspapers/cgisock #Scriptsock
  < / IfModule >
  
  #
  # "C:/Program Files / Apache Software Foundation/Apache2.2/cgi-bin" should be replaced by everything that your ScriptAlias
  # CGI directory exists, if you have set up.
  #
  < directory "C:/Program Files/Apache Software Foundation/Apache2.2/cgi-bin" >
  AllowOverride None
  None of the options
  Order allow, deny
  Allow all the
  < / Book >
  
  #
  # DefaultType: Server default MIME type used for a document
  # If it cannot establish also as file name extensions.
  # If your server contains mainly text or HTML documents, it is "text/plain".
  # a good value. If your content is binary, such as applications
  # or images, you can use "application/octet-stream" instead of
  # Keep browsers try to view binary files, as if they were
  # text.
  #
  DefaultType text/plain
  
  < IfModule mime_module >
  #
  # TypesConfig points to the file containing the list of mappings from
  # MIME file extension - type.
  #
  TypesConfig conf/mime.types
  
  #
  # AddType allows you to add or replace the MIME configuration
  # the file specified in TypesConfig for specific file types.
  #
  #AddType application/x-gzip .tgz
  #
  # AddEncoding allows you to have certain browsers uncompress
  # information on the fly. Note: Not all browsers support this.
  #
  #AddEncoding x-compress. Z
  #AddEncoding x-gzip .gz .tgz
  #
  # If the AddEncoding directives above are commented out, then you
  # should probably define these extensions to indicate media types:
  #
  AddType application/x-compress. Z
  AddType application/x-gzip .gz .tgz
  
  #
  # AddHandler allows you to map certain "manipulators": file extensions
  # No actions associated with the file type. It can be either integrated into the server
  # or added to the directive of the Action (see below)
  #
  # To use CGI outside of ScriptAlias directories scripts:
  # (You will also need to add "ExecCGI" to the "Options" directive.)
  #
  #AddHandler cgi-script .cgi
  
  # For maps of type (negotiated resources):
  #AddHandler type-plan of the var
  
  #
  # Filters allow you to process content before sending it to the client.
  #
  # To parse .shtml for server-side includes (SSI) files:
  # (You will also need to add "Includes" the "Options" directive.)
  #
  #AddType text/html .shtml
  #AddOutputFilter INCLUDES .shtml
  < / IfModule >
  
  #
  # The mod_mime_magic module allows the server to use various boards of the
  content of the file itself to determine its type. The MIMEMagicFile
  # directive tells the module where the definitions of suspicion.
  #
  #MIMEMagicFile conf/magic
  
  #
  # Customizable error responses come in three flavors:
  ((# 1) text 2) local redirects 3) external redirects
  #
  # Examples:
  #Error Document 500 "The server made a boo boo".
  #Error Document 404 Missing.html
  #Error Document 404 "/cgi-bin/missing_handler.pl"
  #Error Document 402 subscription_info.html < url >
  #
  
  #
  # EnableMMAP and EnableSendfile: on systems that support.
  projection in memory # or the sendfile syscall is used to deliver
  # files. Usually, this improves the performance of the server, but must
  # turn off when mounted network is served
  # file systems or if support for these functions is also
  # broken on your system.
  #
  #EnableMMAP off
  #EnableSendfile off
  
  # Additional configuration
  #
  # The configuration files in the conf/extra/directory can be
  # included to add additional features or change the default configuration
  # the server, or you can simply copy their content here and change as
  # necessary.
  
  # Server-pool management (MPM specific)
  #Include conf/extra/httpd-mpm.conf
  
  # Multilingual error messages
  #Include conf/extra/httpd-multilang-errordoc.conf
  
  # Entries to the fancy directory
  #Include conf/extra/httpd-autoindex.conf
  
  # Language settings
  #Include conf/extra/httpd-languages.conf
  
  # User directories
  #Include conf/extra/httpd-userdir.conf
  
  # Info in real time on the applications and configuration
  #Include conf/extra/httpd-info.conf
  
  # Virtual hosts
  #Include conf/extra/httpd-vhosts.conf
  
  # Local access to the manual for the Apache HTTP Server
  #Include conf/extra/httpd-manual.conf
  
  # Distributed authoring and versioning (WebDAV)
  #Include conf/extra/httpd-dav.conf
  
  # Various default settings
  #Include conf/extra/httpd-default.conf
  
  # Secure connections (SSL/TLS)
  #Include conf/extra/httpd-ssl.conf
  #
  # Note: The following text should be present to support
  # start without SSL on platforms without equivalent/dev/random
  but # a statically compiled in mod_ssl.
  #
  < IfModule ssl_module >
  SSLRandomSeed startup builtin
  SSLRandomSeed connect builtin
  < / IfModule >
  
  This is so for the app2 only configuration above, I am able to call and app1 his adage "404 page not found".
  
  Can soomebody help me cofiguring apache so that I can call the two applications.
  
  
  Thank you
  Ankit

  >
  
  WebLogicCluster 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7003, 127.0.0.1:7103, 127.0.0.1:7104
  MatchExpression /app1
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  PathTrim /weblogic
  

  
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  MatchExpression /app2
  
  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  PathTrim /weblogic
  
  >

  This configuration is a little weird. He has /app1 MatchExpression and MatchExpression /app2 and at the same time two sections . Are you sure you understand what means that the configuration?

  Try something like this...

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007, 127.0.0.1:7103, 127.0.0.1:7104
  DebugConfigInfo WE
  

  
  SetHandler weblogic-Manager
  WebLogicCluster 127.0.0.1:7003, 127.0.0.1:7005, 127.0.0.1:7007
  DebugConfigInfo WE
  

  where /app1 and /app2 are your weblogic applications contexts.

  http://download.Oracle.com/docs/CD/E11035_01/WLS100/plugins/Apache.html
  http://httpd.Apache.org/docs/2.0/mod/core.html#location

• How can I compare the differences between two files After Effects?

  I have a major problem.  I was working on special effects for a film.  In After Effects, when I change siggificant, I often have to register under and create a new name so I can go back to the old work if necessary.  It comes in a case, I have come back from earlier works.  If I use these two files After Effects allows you to create multiple clips of effects.  And I do not remember just where you look at it, it is better.  Does anyone know a good way to compare the differences between the files?

  One thing to keep this conversation on the right way: I know that I did a stupid thing.  I've never done this before so can we please not spend a lot of time on how to avoid this problem and stick to how we solve this problem?

  If you encounter difficulties to identify differences in the old and new versions, you can use this procedure:

  To avoid confusion, I'll call your former company and your most recent compositions CompB comps.

  CompA drag "New Comp" icon in the project window.  This will create a new temporary layout that contains the nested CompA.

  Drag in your new COMP CompB temporary ensure it aligns image for image with CompA.

  Place the top layer (CompB) difference.

  Now, when you play through the comp, you'll see differences in color at a time where the comparison and CompB are not identical.