How to make a layer corresponds to the size of the model?
Rather than drag the corner points and a layer to make it fit the size of the model (1920 x 1080) to the eye, is there a typo or a method that will do it automatically and accurately?
Not quite sure what you're saying. As lasvideo said, the size can easily be defined for solids. For everything else you can wanan look the Fayer--> Transform editing options in the menu and the associated keys...
Mylenium
Tags: After Effects
Similar Questions
-
CS6 using
T-Shirt Designing (1): how to make the white box more wide inside the shirt (using the model of t-shirt)?
Well, I learned that I can go to file > new from the template > blank template > T-shirt to start to create a design for my t-shirt.
It shows a small picture of the t-shirt with a rectangle in the middle that also represents the large rectangle (where I create my design).
Question, am I suppose to create the right design in the large rectangle?
2nd... I figured out how to adjust the length and width of the largest rectangle (through the corners, then clicking on it to open the section length/width at the top of the screen). However, when I adjust the height and width, is not the same for the rectangle inside the shirt.
What I'm trying to do, is ensure that my design takes more than forward of the sweater by expanding the width.
How to make the small rectangle in the large t-shirt too?
Hello
The small rectangle in the t-shirt line drawing is a guide. So, what you need to do is unlock guides, remove the small rectangle and create a new.
(1) go to the view > Guides > release Guides. You will now be able to edit the guides, which are light blue in my document.
(2) just so that you know what I'm talking specifically, open the Layers panel and place you on the Guides layer. Click the arrow next to reveal the guides within the layer. I locked all the other layers in the document to make it easy for me.
(3) select the small rectangle, and delete.
(4) use the Rectangle tool to draw a new in size.
5) option click on the new rectangle to open a launcher. Select make Guides.
You now have a guide again, larger rectangle! Let me know if you have any other questions.
-
How to make a checkbox corresponding to the change of a ComboBox control
_Natasha_ has solved my first question on textInput correspond to ComboBox. Now I have the same situation with the checkbox. See the attached file. Help, please.
I have code like this, but they do not work. The check box is still selected.
< mx:CheckBox
x=" 190 "y =" 388 "label =" with grouping "width =" "id =" ckWithGroup " " 244 "
" selected =" {}CBox.selectedItem.WITH_GROUPING} " " / > "
< mx:CheckBox x=" 190 "y =" 432 "label =" with hosting "width =" "id =" ckWithHost 244
"
" selected =" {}CBox.selectedItem.WITH_HOSTING} "" "/ >
Thank you in advance!
Hello
I have also tried for direct binding of combolbx box, but
in this case---> selected = "{cmbBox.selectedItem.WITH_HOSTING}" does not work correctly.
But in the case of---> selected = "{cmbBox.selectedItem.WITH_HOSTING is 'false'? "{fake: true} ' is works very well;
Check the attached file if necessary.
It can help you.
Regarding
Virat Patel
-
How to make transparent cluster keeping only the elements inside the visible cluster?
Hello
Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.
Thanks in advance,
Vinciane
As I said, use the space bar for what is paint. This works. Trust me.
PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.
-
I get my email on two computers. How to make a computer out of the loop?
I get my email on two computers. How to make a computer out of the loop without jeopardizing my Comcast email account?
Using Outlook Express? Go to: tools | Accounts and delete the account. If you think you can it in the future, go to the properties of the account, and under the general tab, simply uncheck: include this account when receiving or synchronization.
If you are interested, you can receive messages at a time without losing them on one.
On both machines:
Tools | Accounts | Mail | Properties | Advanced - Check: leave a copy of messages on the server.
On a single computer only, make sure to delete messages after X days to satisfy your allocated space that you get from your server.
-
How to make 'Save to Desktop' save the default value instead of 'This PC'?
How to make 'Save to Desktop' save the default value instead of 'This PC'?
Windows 10, I guess?
-
How to convert a layer back to the text "T? He is currently uneditable and I want to change the font (also, how what happened?).
According to your layers panel. The top layer is a text layer years the second layer is a raster layer. A raster layer once the case has been closed, cannot be cancelled. It will have to be re-created. If for some reason, you left the file open, then it is perhaps possible to cancel it, because it would show in the history stack. But by default that stack is set to 20 States, to more than 20 he would push the battery.
I think that you have to bite the bullet and redo this layer.
-
In CC Dramweaver Adobe how to make my Web page fill the entire window?
In Adobe Dreamweaver CC how to make my Web page fill the entire window?
A width of 100% CSS.
Body {width: 100 %}}
Nancy O.
-
How to get feedback from users in the model layer?
Hello
I have a page with a table and a commandButton control. User can select several rows in the table and press the button. By pressing the button, I call a method in AppModuleImpl.java and pass the selected lines. inside the method I iterate over the selected lines and do something on each line. To do my job, I need a field, for example the date of birth field, has a value, but for certain lines of this field is empty and I want to get the value of the user. Now my question is how can I get user feedback in the model layer? (don't forget that I am inside the AppModuleImpl.java)
Is it possible to open a dialog by program and get the value of the user if needed (i.e. If the row has the value)? If Yes, how should I do?
JDev version: 11.1.1.4
Thank you
Will doIn both cases the execution does not stop to view the context menu and the popup is displayed when the called managed bean method is completed
Execution does not stop. That is right.
"Modal dialog box" in terms of web simply means 'a dialogue box that blocks (more or less) user input until the dialog box is closed'. You think that a modal dialog is a dialog box that stops execution of your code until the dialog box is closed and then execution continues where you left it. There is no such thing in the web. Enforcement must continue, the demand must fill. When the user closes the dialog box, then it is a new application in.
Thus, it is not as a modal dialog in Swing. You need to stop running yourself when you open the modal dialog box and continue your code when the next request comes, for example:
You determine that a dialogue must be shown, you open the pop-up window and return. The listener to the dialog box, you then call a method that continues to do what you need to do according to the result of the dialog box.Sascha
-
How to make a web page to the size of browsers?
How to make a web page to the size of browsers?
Try to download the pdf file and the example in this tutorial files, which explain how to do this.
http://www.Adobe.com/devnet/Dreamweaver/articles/bk_dwcs4_mastering_css.html
PZ
-
How to make non-visible control on the Front Panel appear at Design time?
I have a few controls on the front whose visibility is changed (on or off) at run time. The problem is that if I stop the Run time, the visibility of the control remains in the running in design mode state. So I am not able to see or find the control to make changes in design mode.
How can I make all the visible front-panel controls, or find and make it visible to a control on the front whose visibility has False?
Thank you.
It is documented in the help of LabVIEW.
Hidden front panel display
Perform the following steps to display a hidden front control or indicator. You can also hide the indicators and controls on the front panel.
- Find the terminal block schema for the object. "If you have multiple devices with the same type of data, right click on the terminals and select visible elements" Label in the context menu. Find the object with the label that corresponds to the object hidden façade.
- Right-click in the Terminal, and then select Show Control context menu if the object is a control or indicator to show if the object is an indicator.
You can also use the Visible property to display the controls and indicators by program.
You can also view all hidden front panel controls and indicators.
Path: Fundamentals-> build the façade-> how-to--> configure the objects-> display on front panel of the façade hidden object.
-
How to make a bootable USB using the disc with El Capitan utilities?
Anyone know how to make a bootable USB key using the disc with El Capitan utilities?
Try this its worked perfectly.
-
In windows 7, how to make firefox automatically starts when the computer is turned on
In Windows 7, how to make Firefox starts automatically when I turn on the computer. Note, I ask how to do this with Windows 7, xp, not vista.
You place a shortcut to open Firefox in the start menu > programs > startup folder.
It is essentially the same in all versions of Windows. -
How to make fonts and icons in the menus for each larger screen?
How to make larger fonts and icons in the menus on my iMac screen?
You can change the size of icons, arrange them in a grid and set other preferences for items on your desktop by changing the options to display on your desktop. To change your desktop view options, click on the desktop and then choose the command view > Display Options from the menu bar. You can try different settings to see which ones you like, you will immediately see the effects of your changes.
-
HOW TO MAKE DATE VISIBLE CONSTANTLY TO THE POINT WHERE IN THE NOTIFICATION BAR?
I know that the date appears when I hover over the time. And I noticed that if I develop the width of the notification bar, the date will appear. But I don't want to do the bar is wider. I want just the date to display next to the time. I also know that I can go into customize Notification icons. HOWEVER, there is no icon to select which corresponds to the date display. (In a screenshot of another list of users, I saw a globe-type icon corresponding to the date and time display, but is not on my list.)
I'd like your help. :^)
Peace,
-Virginia
http://www.IMDB.com/name/nm0403825/Hello
You said in addition to the clock so I initially think not that you need it however, others have
said it would be a good idea to show this method of date display. Also if you are moving
the taskbar vertically then the date is also displayed.Always see the day, date and time in the taskbar
http://freewindowsvistatutorials.com/meetWindowsVista/taskbarAndSystemTray/showDayDateAndTimeInTheClock.phpYou can increase the highest taskbar - right click it - uncheck lock the taskbar then High grad
He and raise more high and the date which will be under the clock.--------------------------------------------------------------------
I found a utility that makes T-clock - free - 3 references to it:
Windows7 like clock on the system in Vista & XP tray
http://www.tothepc.com/archives/Windows7-like-clock-on-system-tray-in-Vista-XP/TClock: See the Date Look like Windows 7 & time in the system tray in Windows XP and Vista
http://www.askvg.com/tclock-show-Windows-7-look-like-date-time-in-system-tray-in-Windows-XP-and-Vista/T - Clock of the Stoic Joker
http://www.greggdeselms.com/tclock.htmlI hope this helps.
Rob - bicycle - Mark Twain said it is good.
Maybe you are looking for
-
You need a card mother Tecra S1 or intact with mainboard failure.
I am owner of a not so happy nowadays to a Tecra S1 1.6 GHz. He got all the typical problems for this model. First HARD drive broke, then taken helmet and graphics card now. Everything was OK until they broke out the graphics card. It worked like a d
-
Hello I am currently looking to browse hundreds of text files my VI to run the VI once and having labview to open each text file in the order numberical that are contained in a single folder. In general, I ran each file one at a time through the VI,
-
USN journal on the D drive can't start my computer...
So my question in detail, is that after last nights update auto restart, my computer does not start upward with attached D drive. He forced the system to check the disk, gives me a list of success just is there and does nothing... I will attempt to t
-
Today, I tried to get on my Windows Mail and the logon to windows mail window popped up. I put in my username and password and it accepts it. Anyone know what is happening? Or how Original title: windows mail
-
WET11 the boot to windows-only CD?
I recently bought a used WET11. It came with the CD and the getting started guide, but it seems the installation CD is only designed to run on a Windows computer. Y at - it somewhere that I can download it to use on my Mac?