How to make a material test

Similar Questions

• How to make a Test Site with Muse in British Colombia?

  How to make a site to test with muse in British Colombia?

  I'll answer my own question. You go to file > publish > name a name of test site.

• How to make Vista partition on the HARD drive as first with recovery CD

  Hello

  I want to format and retrieve information from my 'Vista' (C: / /) partition, which is the first. But when I choose the option "Format and recover to a first partition on your hard disk (without RE) ' the computer began to recover in" Type of Partition: windows NT NTFS (ID: 07) "whose size is only 1.50 GB.

  In the middle of the process, it shows not 'enough space on a disk.

  Question: How to make a 'vista' first partition? What is 'the first partition' in the second formatting option and recover the system?
  Thank you for your answers

  Hello

  Sorry, but you will not be able to do. I know it's a bad situation but if you use the first option that the whole HARD disk will be formatted and C new partition created. Second option, that you can not use at all. I tested it with my Satellite A100.

  I called Toshiba and they said that Toshiba work on new recovery options and new notebooks will have the best recovery option. Something like old installation expert ghost mode.

  I know it's wrong, but unfortunately there is nothing to do.

• How to make a free software for my laptop newly formatted? In addition to Windows 8.

  How to make a free software for my laptop newly formatted? In addition to Windows 8. I have an extended warranty at the dealer where I bought my laptop and do not know if the installation of free software is covered. But I want to do it myself if the resources are available.

  You can order Windows 8 update from the following link:

  http://www.windowsupgradeoffer.com/

  The following link will offer you if HP has tested your system for Windows 8:
  http://WWW8.HP.com/us/en/Ad/Windows-8/instructions.html

  If your system is not tested, HP will not release the drivers directly for your site template Web HP.com.

  The following hyperlink will suggest if your system is compatible with Windows 8:
  http://Windows.Microsoft.com/en-us/Windows-8/upgrade-to-Windows-8

  If your system is compatible with Windows 8, most of the pilots would be available through Windows 8. If you need any specific driver, please follow these steps:
  1. in the run box, type devmgmt.msc.
  2 unknown devices would be listed as such and plotted with a yellow question mark.
  3. Select the unknown device or any other device you need of drivers and right-click to access the properties.
  4. in the Properties window, click the Details tab and select Device Instance of Id or hardware ID from the drop-down.
  5. an alphanumeric string, like this DEV_7130 & PCI\VEN_1217 & SUBSYS_012F1025 & REV_01\4 & 6B16D5B & 0 & 33F0 is the marker for the identification of the unit.
  6. Please provide this number so we can offer you the appropriate driver.

• How to make a picture of MS and a recovery CD to my HD using Win Pro 7?

  I completely under license from MS Windows 7 Pro and Office Pro 2007.

  I recently went though a Script virus trouble which resulted in my need to blow away (reformat) the HD and install all my programs under license and all the drivers from scratch.

  How to make a disk Image of my drive C and also a bootable CD Windows, in which case I have to do this again?

  You hope that it works?

  The day you have your backup/restore tools to work is not the day to know that they don't.

  Why not make a little test... pretend that your system does not start for some reason unknown and impossible to fix and to do the image you have created to recover.

  With the stuff you have since your last operation (a picture that is stored somewhere and a bootable CD), you can at least run a test to see if you can boot from the CD, and then if you can get there far enough, see if you can at least access the images you created.

  Of course, you don't have to actually restore the image - just make sure that you can boot from the CD you have done, and from there, you can at least navigate to and find the image that you created and do things at the point choose to restore your system from this image.

  Have you checked that you can at least get there?

  I use Macrium Reflect (the free version) and keep my images on an external drive.

  I made a bootable USB drive using Macrium.

  To make me feel better about all of this, I started my system on the USB and from there I could navigate to and view system images stored on my external hard drive and could choose to restore the last picture, if I wanted to.

  Of course I didn't really want to restore that image, but at least I got far enough along to believe that if I ever need to restore from an image at least I had something that I could start now and at least find my backup of images in case I ever need to use.

  Will it really work if I ever need to use it?  The only way to know for sure would be to actually try it and see and I could do it one day, but at least it looks promising.

  If you are using built in tools MS you could do the same kind of test and if you encounter a problem and it does not you can understand what is the problem and see if you can remedy.

  Another thing to consider is that if you have a problem with the MS tools and come to this community help I think that it is extremely unlikely that you will find a lot of help with the exception of the most fundamental aspects.  Microsoft has committed that 'experts' alleged Support Engineer here seem unable to solve even the simplest problems.

  If you need assistance with your backup/restore operation I don't think you're going to get a lot of Microsoft because Microsoft is not in the business of backup/restore.  This isn't what they are doing and is not their area of expertise.  You will probably get the best help in using the tools of the companies working in the areas of backup/restore, that's all they do and that's what they are doing throughout the day.

  In these communities of MS, volunteers are always your most reliable resource for solving problems.

• How to make a simple video with my computer ' s web cam?

  I recently (10 minutes ago) asked a simple question on how to make a video.  For five of the most wonderful years of my life, I have designed critical systems of path for launch Pads 39A & B, the vehicle Assembly building and the robot that went out the candle to the pad.  On paper, a critical path system explained how the engineer, design and build a structure.  In this case, it was activities separate from about 3400 and when, how and how long these activities were to each other.  At the time where the Commander.  I worked and which had been granted to these contracts, had developed the method of the path critical following the guidance system of the Polaris Missile, which was incredibly hard to get a handle.  At the time where manned Apollo lunar Mission has been in place, I was one of only ten people in the world, who knew the process.  We needed honest, some answers to our questions or it would take years to accomplish what Stephen Hawking characterized as "the unique accomplishment largest in human history" you gave me answers to my questions by these 'engineers' for Microsoft on the use of a webcam and had implemented them, would not be there was a second launch of Apollo because the first three astronauts would be dead.  How to make a simple video with my computer ' s web cam?     Al wood

  http://www.WikiHow.com/use-webcam-on-Windows-Movie-Maker

  Movie Maker: http://windows.microsoft.com/en-us/windows-live/movie-maker

  Not tested.  Instructions could be for the old version of Movie Maker, but they probably give you the basics.

  (It's a way of many - that the answer does not depend on your OS, but on the software you use to interface with your webcam.  Camtasia?  Skype?  etc and so on...)

  In addition, to find this information is quite simple.  Once I decided on what software to go with in my response to you (I chose Windows Movie Maker 12 because it's easy to get, free, Microsoft, similar to products that were previously found with Windows) I did a simple search on Google:

  use Windows Movie Maker 12 with webcam

  https://www.Google.com/#q=Use+Windows+Movie+Maker+12+with+webcam

  or more demonstratively:

  http://lmgtfy.com/?q=Use+Windows+Movie+Maker+12+with+webcam

  The first hit seems to be a video market even helps you to download and install the Windows Movie Maker 12 application...

• How to make a website added to Windows RT support flash on this website

  How to make a website added to Windows RT support flash on this website

  There are 2 ways to hack into the white list of flash on IE.

  (1) modify the registry, see http://msdn.microsoft.com/en-us/library/ie/jj193557(v=vs.85).aspx, section "Testing your site" here

  (2) change the whitelist file C:\Users\XXXX\AppData\Local\Microsoft\Internet Explorer\IECompatData and Compatible stop see updates. See here http://thenextweb.com/microsoft/2012/11/05/how-to-use-microsofts-own-whitelisting-feature-to-enable-flash-on-the-metro-version-of-ie10/?awesm=tnw.to_kY5p

  However, both methods are deprecated, especially the other. You must take the risk, of course.

• How to make a Plan to explain on PL - SQL?

  Hey guys, it's Xev, I'm back with a whole new positive attitude . I am very happy now that I got my cluster (11.2) 2-node RAC 11 GR 2 installed and working properly

  I'm doing a plan to explain some pl - sql, I wrote, but I'm having a hard time trying to figure out how to make it work.

  The catplan.sql has been performed and I a plan_table ready and waiting for me.

  Here's the full code as well as the two tables table that I use, just as I'm supposed to display.

  This is the first table

  and Yes, I only want a single folder in there...

  CREATE TABLE FILLER

  ("DATA_PACKED" VARCHAR2 (75 BYTE)

  )

  Insert in FILLING (DATA_PACKED) values ('KICKKKKKKKKK');

  commit;

  Then at the top on the list is the table of the HAMMER, I will insert all the data once the pl/sql program runs...

  This table is supposed to be empty...

  CREATE TABLE HAMMER

  ('H1' VARCHAR2 (100 BYTE),

  "H2" VARCHAR2 (100 BYTE)

  )

  and now, the CODE... Now, it is a very small version of my load of GR 11, 2 test scripts that I wrote, but I need to see execution plan behind this logic.

  I can even make a plan to explain on this code, or do I have to use something else?
  

  ---------------------------------------------------------------------------------------------------------

  declare

  Table type is table of the varchar2 (30) index directory.

  Table Z_STUFF.

  Start

  Select * BULK COLLECT into Z_STUFF of filling;

  because me in 1... 100

  loop

  for zoo in 1... Z_STUFF. Count

  loop

  Insert into HAMMER (H1, H2)

  values (Z_STUFF (zoo), Z_STUFF (zoo));

  end loop;

  end loop;

  end;

  /

  ----------------------------------------------------------------------------------------------------

  All comments are welcome, I just need to see what makes this logic behind the scenes...

  Thank you

  Xev.

  A query plan refers to an SQL statement.  A PL/SQL block can have 0 or more SQL statements.  It is, therefore, unnecessary to speak to generate a query plan for a PL/SQL block.  Your PL/SQL block happens to contain two different SQL statements.  You might get two different query plans, one for each statement.  Given how trivial statements are, however, I'm not sure that query plans would give you a lot of information.

  What is the problem you're trying to solve?  If you try to set the PL/SQL, you probably want to look into various profilers of PL/SQL.  For example, the DBMS_PROFILER package or the package DBMS_HPROF.

  Justin

• When I type text, the text is in a box, and I can't figure out how to make the box go away. I never had this problem before.

  When I type the text in the latest Illustrator, the text is in a white box. I never had this problem before. I can't find out how to make the box go away. What I am doing wrong?

  Today I tried to close Illustrator and re-boot the computer. It did not help. I went on a second computer video/graphics/animation and open Illustrator here. I did a few tests, and he managed to create the text without a box. Then, I opened my first computer Illustrator file form. The boxes were there. I tried to type the new text, and the box was there. When I open the file it says something about a missing font and a replacement. I tried to use this area to locate the police but couldn't. It's the default font on Illustrator on the other computer. A variant of Myriad. I tried to type in the text with a different font. No box. The default font selected by the Illustrator has apparently a box. I didn't try to change the font because it was going well, and because I didn't know any font came with a box. At first, I did all of the text, which was on a white background, so I don't see the boxes of cream. When I added the background image of the boxes appeared. If the problem is resolved. It was a font with a box.

• How to make the instance of oracle bpm asynchronous process?

  I want to create a bpm processes that start as asynchronous. Can someone tell me how to do it and test it?
  Should I first define the structure of data/xsd? Thank you

  It's pretty easy.

  Double-click the Message of your BPM process start event and then go to the implementation tab expand the "Advanced" pane by clicking on the icon "+". Here you will see a button that allows you to make your process "Synchronous" and "asynchronous". Choose the mode you want.

• Question about how 'First' makes the sequences

  Hi all

  I have a small question. I have a calendar in which I placed a transparent video with a timecode effect thereon for the purpose of lining of the stuff. I turned the visibility of it, but I wonder if I should remove it before as I give to improve the rendering time. First will interfere with him or she will calculate that it is there as an object for "invisible" also?

  This may sound really stupid to ask, but I'm learning how to be as effective as possible in my workflow and if first does not care that it is because he is disabled, so I'd be inclined to let incase I need it again, but if she would accelerate rendering my project then I would take it before my final DVD build I intend to publish.

  Any thoughts?

  Premiere Pro makes that material visible. So feel free to leave there with visibility turned off.

  Edit: to prove to yourself, add an effect to transparent video which causes the rendered line go red. As a"camera view". Die the eyeball and the Red goes. Make sense?

• How to display the window test animation Flash CS 6 smaller?

  I use AIR for iOS and the scene is 1152 x 1536, whenever I have test the movie, that it seems in full resolution and it is difficult to see everything. How can I make the window test movie appear smaller when I press Ctrl + Enter (test movie). Thank you.

  You can make the window smaller by dragging to change its position and then clicking on file/close.  then re - test.

  You can click on view/Zoom to allow the view/zoom out to see the full stage in the small window.

• A question about how to make something similar to a Navigation bar?

  Hi guys, I'm sorry if this has been asked before, I just completely sure what I was looking for!

  Well, I think my first official for the company website that I work.  I was curious about how to make a navigation enough image size, with a little information and a link visitors could click to learn more.  I don't know what this method is called or where to start to create a!

  I was certainly not specific, but I don't speak of something similar to www.nationalgeographic.com.

  At the top of their page, they have a daily news thing, when you click the numbers, it takes you to a picture and a sentence of information and a link at the bottom left for "More".

  That's what I was looking for!

  I hope you guys can help me, thanks in advance!

  Adobe Exchange has several cool widgets that you can use.

  http://ALT-Web.com/demos/Spry-test.html

  You will need to install Adobe area to use the browser Widget ~ installed from the link below:

  http://labs.Adobe.com/technologies/widgetbrowser/

  Log-in to Adobe Exchange to enter & configuration desired widgets.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• How to fast refresh materialized view parallel

  We have Oracle 11.2.0.1 on Redhat 5.2. We use a dozen views fast refresh materialized in our application.
  Occasionally refresh MV takes longer than the refresh interval.
  
  One of the ways to improve the performance of refresh MV is to update at the same time, for example

  http://www.dba-oracle.com/t_materialized_views_refreshing_performance.htm
  
  - Use parallel DML - Oracle author Michael Armstrong Smith notes "I've done parallel materialized view refreshing
   on tables recently and improved the load times considerably. Rather than having one load which took 2 hours,
   I run 4 parallel loads, one for each partition. The length of time for the whole process is now determined by
   how long the biggest partition takes to load. In my case, this is 40 minutes, with two 30 minute loads and one
   20 minute load.  Overall I am saving 1 hour 20 minutes. I can now add further partitions and do the same thing.
   My only limitation is the parallel loads because I don't have unlimited processing power.
  {code} My master tables are not partitioned, but think parallel will still better than non-parallel.
  
  Now the question, how to make refresh parallel. According to the paragraph cited above, Use parallel DML appears doing the job. Can someone  confirm that.
  
  We use {code}
  alter materialied view MV_OFFENSE parallel REFRESH FAST start with sysdate next sysdate+ 1/24;
  {code}to schedule refresh. Does the parallel clause here parallels query the MV or refresh the MV?
  
  Any other way to make MV refresh parallel?
  
  Thanks                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                

  Hello

  Just search for * 577870.1*. But before you search, select ID of item in the source list.

  Hope this helps.
  Best regards
  Jean Valentine

• How to make a scroll in html bar

  Here's my problem:

  My landing page is 1000 x 600 and the page size is set to this, but my Gallery page is 1000 x 1200. When I go to test the animation or the default html browser test, when you access my Gallery page there is no way to scroll down to see the lower part of the page.

  I can't do all the pages on the site of the same size. How to make different sizes of the page and still be able to scroll down to see the rest of the page?

  It is usually easier to put everything that ought to be mobile in a single container movieclip and use the scroll control mechanism you decide for her.  You can probably use a scroll bar component, but you'll have to look that up to see how to create a.  I will design my own scroll commands usually.

  A small-scale version you should change in y (or the FLF for AS2) This movieclip property based on the change in position of an object startDrag (cursor of a scroll bar) property of y with respect to its position within its own movieclip. So if the slider has a range of movement of 100 pixels, each pixel of the movement would represent 1% of the range of total motion of the movieclip (which in your case would be a total margin of 600 pixels)... for each pixel the cursor move results in the movieclip moving 6 pixels.