Question about how 'First' makes the sequences

Similar Questions

• A question about how to make something similar to a Navigation bar?

  Hi guys, I'm sorry if this has been asked before, I just completely sure what I was looking for!

  Well, I think my first official for the company website that I work.  I was curious about how to make a navigation enough image size, with a little information and a link visitors could click to learn more.  I don't know what this method is called or where to start to create a!

  I was certainly not specific, but I don't speak of something similar to www.nationalgeographic.com.

  At the top of their page, they have a daily news thing, when you click the numbers, it takes you to a picture and a sentence of information and a link at the bottom left for "More".

  That's what I was looking for!

  I hope you guys can help me, thanks in advance!

  Adobe Exchange has several cool widgets that you can use.

  http://ALT-Web.com/demos/Spry-test.html

  You will need to install Adobe area to use the browser Widget ~ installed from the link below:

  http://labs.Adobe.com/technologies/widgetbrowser/

  Log-in to Adobe Exchange to enter & configuration desired widgets.

  Nancy O.

  ALT-Web Design & Publishing

  Web | Graphics | Print | Media specialists

  http://ALT-Web.com/

• question about how to combine the two scripts.

  
  Hello

  I have a sql script that can display a table (or view) all the information, it works fine. I call it validate_table.sql, as below:

  command prompt
  accept invites owner "Enter table owner:
  accept invites from TABLE_NAME "Enter object (table/View...) "name:"

  
  column owner format a10 column 'owner '.
  column format a30 topic 'Object name' object_name
  column object_type format a15 direction "Type of object".
  Status format a10 column titled "Status".
  in the heading of column created format a20 "created."
  the LAST_DDL_TIME format a20, heading 'LAST_DDL_TIME.
  Select
  owner
  object_name
  object_type
  status
  , to_char (created, "DD_MON_YY hh24:mi:ss") created
  LAST_DDL_TIME,
  Of
  DBA_OBJECTS
  where
  object_name = upper ('& table_name') and owner = upper ('& owner');

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  Guest - table/view structure-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  
  describe and owner... & table table_name

  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list assigned user/subsidies-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  set pagesize 50000
  set linesize 10000
  set verify off
  Set feedback off
  column lvl format A4 direction "Lvl".
  proprietary format of columns A14
  format column in table_name A29
  A38 dealer column format
  column privilege A10 format

  
  SELECT 'Role' lvl, t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee IN (SELECT FROM dba_roles role WHERE = role t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  UNION
  SELECT 'User' lvl t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee IN (SELECT username FROM dba_users WHERE username = t.grantee) and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  UNION
  SELECT 'Pub' lvl, t.table_name, t.grantee, t.owner, t.privilege
  OF dba_tab_privs t
  WHERE t.grantee = 'PUBLIC' and t.table_name = upper ('& table_name') and t.owner = upper ('& owner')
  ORDER BY 1, 2, 3;

  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list of synonyms created.

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  
  proprietary format of columns A15
  synonym_name A20 column format
  A15 table_owner column format
  format column in table_name A40
  DB_link A40 column format

  Select the owner, synonym_name, table_owner, table_name, DB_link from DBA_synonyms where Table_name = upper ('& table_name') stopped by the owner;

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list index created-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  Select
  table-name
  index_name
  index_type
  nom_tablespace
  status
  of DBA_indexes
  WHERE table_name = upper ('& table_name') and owner = upper ('& owner')
  order of table_name, index_name;

  
  command prompt

  prompt -- ----------------------------------------------------------------------- ---

  guest - list of constraints-

  prompt -- ----------------------------------------------------------------------- ---

  command prompt

  format column in table_name A15
  format of column cons_type A15
  cons_name A20 column format
  check_cons A25 column format
  VALIDATED A20 column format
  column status A10 format
  last_change A20 column format

  Select
  table-name
  (case constraint_type
  When 'P', then 'Primary Key '.
  When 'R' then 'Foreign Key'
  When 'C' then 'check '.
  When 'U' then 'single '.
  When 'o' then 'read only display '.
  When 'V' then 'check the view. "
  When 'H' then 'Hash expression. "
  When 'F' then 'REF column.
  When the of ' then 'additional logging.
  cons_type end)
  constraint_name cons_name
  condition_de_recherche check_cons
  status
  VALID
  last_change
  of dba_constraints
  where owner = upper ('& owner')
  and table_name = upper ('& table_name')
  order of cons_type;

  I have another script that allows to display the newly created tables (table, table names) in the last 24 hours.

  SET SERVEROUTPUT ON;

  DECLARE

  CURSOR tmp_cur IS

  SELECT master, object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE') and the owner not in ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN") and last_ddl_time > sysdate - 1;

  tmp_rec tmp_cur % ROWTYPE;

  BEGIN

  FOR tmp_rec IN tmp_cur LOOP

  DBMS_OUTPUT. PUT_LINE)

  tmp_rec. Owner | ' ' || tmp_rec.object_name);

  END LOOP;

  END;

  /

  The gap of the first script (validate_table.sql) is that it can only check table one by one by manual entry, then how can I combine these two scripts, to make a scipt that can check all newly created tables (not a table) in the last 24 hours?

  I thank very you much in advance!

  Hello

  If you already know how to find the owner and all the tables created table_name recently.  One thing you can do is to change all the WHERE clauses in validate_table.sql, so instead of things like

  where object_name = upper ('& table_name') and owner = upper('&owner');

  you say

  WHERE (owner, object_name) IN

  (

  SELECT master, object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE')

  AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

  AND last_ddl_time > SYSDATE - 1

  )

  ;

  Here is another approach:

  Validate_table. SQL is quite handy as it is.  You may want to run this script for tables, even when you know that they are not new.  Divide into 2 scripts: one called ask_and_describe_table.sql, which looks like this:

  -Ask_and_Describe_Table.sql

  accept invites owner "Enter table owner:

  accept invites from TABLE_NAME "Enter object (table/View...) "name:"

  -You can use any name path instead of d:\some_dir below:

  @d:\some_dir\describe_table & owner, table_name

  and the other one called Describe_Table.sql, which starts like this:

  -Describe_Table.sql

  DEFINE owner = & 1

  DEFINE table_name = & 2

  column owner format a10 column 'owner '.

  ...

  and continues with the same exact content as validate_table.sql.

  Now, to write another script (I'll call it Describe_Recent_Tables.sql):

  -Describe_Recent_Tables.sql - create and run Describe_Many_Tables.sql

  -Turn OFF the devices designed to help people to read the output:

  SET ECHO OFF

  SET FEEDBACK OFF

  SET PAGESIZE 0

  VERRIFY OFF SET

  -Create a Describe_Many_Tables.sql:

  COIL d:\some_dir\describe_many_tables.sql

  SELECT ' @d:\some_dir\describe_table '

  ||      owner

  ||      '  '

  ||      object_name

  FROM dba_objects

  WHERE object_type in ('TABLE', 'SEE')

  AND owner NOT IN ('SYS', 'SYSTEM', 'GENERAL', "XDB", "OUTLN", "SYSMAN")

  AND last_ddl_time > SYSDATE - 1;

  SPOOL OFF

  -Features lighting designed to help people to read the output:

  SET ECHO ON

  SET FEEDBACK ON

  SET PAGESIZE 50

  SET VERRIFY ON

  -Describe_Many_Tables.sql performance

  @d:\some_dir\describe_many_tables

  I guess that all of your tables have standard names (for example, start with a letter, no spaces in the name,...), which don't require quotation marks.  If they could, then the same basic approach will work, but the details are a little messier.

  When you want to see the information on a single table or view, no matter how old it is, driven

  Ask_and_Describe_Table

  or, if you do not need to question the owner of the table and the name, something like

  Describe_Table SCOTT EMP

  (You can find that you really need not Ask_and_Describe_Table.sql).

  When you want to do this for all the tables created in the last 24 hours:

  Describe_Recent_Tables

• Question about how Oracle manages the Redo logs

  Hello
  
  Assuming a configuration which consists of 2 redo log groups (groups A and B), each group of 2 disks (disks A1 and A2 for Group A) and B1 and B2 disks for Group B. Additionally, assume that each redo log file resides by itself in a disk storage device and that the device is dedicated to her. So in the situation described above, there are 4 discs, one for each redo log file, and each disc contains nothing other than a redo log file. Also, assume that the database is in ARCHIVELOG mode and the files from archive is stored on another different set of devices.
  
  kind of graphically:
  

      GROUP A             GROUP B
  
        A1                  B1
        A2                  B2

  The question is: when the disks that make up the Group A are filled and Oracle switches to the disks in the Group B, can the group drives to take offline, perhaps even physically removed from the system if necessary without affecting the functioning of the database? Can the archiver process temporarily delayed until the disks (which have been removed) are presented online or is the DBA have to wait until the end of the process to archive a copy of the redo log file creating in archive?
  
  Thank you for your help,
  
  John.

  Hello
  A journal of the groups fall

  To remove a group of online redo logs, you must have the ALTER DATABASE system privilege. Before you delete a line redo log group, consider the following precautions and restrictions:

  * An instance requires at least two groups of files logging online, regardless of the number of members in the groups. (A group is one or more members.)
  * You can delete a group of newspapers online redo only if it is inactive. If you need to drop the current group, first force a log switch occurs.
  * Make sure a group of online redo logs is archived (if archiving is enabled) before dropping. To see if this happens, use the view LOG V$.

  SELECT GROUP #, ARCHIVED, STATUS FROM V$ LOG;

  GROUP # ARC STATUS
  --------- --- ----------------
  1 ACTIVE YES
  2. NO CURRENT
  3 INACTIVE YES
  4 INACTIVE YES

  Delete a group of newspapers online redo with the SQL ALTER DATABASE statement with the DROP LOGFILE clause.

  The following statement drops redo log group number 3:

  ALTER DATABASE, DROP LOGFILE GROUP 3;

  When a group of online redo logs is deleted from the database, and you do not use Oracle managed files, operating system files are not removed from the disk. Instead, control of the associated database files are updated to remove members of the Group of the database structure. After deleting a group of online redo logs, make sure the drop completed successfully and then use the command of operating system appropriate to delete the dropped online redo log files.

  When you work with files managed by Oracle, the cleaning of operating system files is done automatically for you.
  Your database will not be affected as you can work with 2 files, redo log in each group, as the minimum number of redo log in a database file is two because the process LGWR (newspaper writer) writes in the redo log in a circular way. If the process crashes because you have 2 groups only if you want to remove 1 Add a third and make that the current group and remove the one you want to be offline.

  Please refer to:
  http://download.Oracle.com/docs/CD/B10500_01/server.920/a96521/onlineredo.htm#7438
  Kind regards
  Mohamed
  Oracle DBA

• Four questions about how to change the Satellite L650 - 1 M 0

  Hello

  The laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?
  Currently, I don't have a WiFi card.

  I have a second question:
  The laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?

  And the third question:
  The laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?

  Most recent:
  The laptop Toshiba L650 - 1 M 0 is possible to replace the processor and graphics card?

  These questions are for the future. I mention these parts when you are already old and weak.

  Sorry for my bad English, but I used the Google Translator because I do not know how the English language. I only know the Polish ;)

  Please write without mistakes, because the Google translator will be able to translate for me.

  > Is that the laptop Toshiba L650 - 1 M 0 is possible to add the Bluetooth?

  I think it would be possible to upgrade with the combo Wifi/BT card.
  But I haven't found any info what WLan/BT cards combo would be compatible 100%.
  You should test

  > Laptop Toshiba L650 - 1 M 0 is possible to replace the ports USB 2.0 to 3.0?
  No, the USB ports are part of the motherboard.

  > Is that the laptop Toshiba L650 - 1 M 0 is possible to replace the matrix with a resolution of 1366 x 768 full HD (1920 x 1080) resolution?

  I guess it would be possible, but we must find a 15.6 screen that supports such a resolution.

  > Laptop Toshiba L650 - 1 M 0 is possible to replace the graphics card and processor?

  GPU is not extensible.
  In some cases its possible to upgrade the processor, but you will need to check which processors are supported by Mobile Intel HM55 Express Chipset
  But even if the chipset would be favourable to a new processor, there would be still pending regarding BIOS support.
  However, this upgrade took isn t supported by any laptop manufacturer, and I guess that its your own risk by doing this.

• Questions about how to avoid the "while OTHERS"

  Hello
  
  I am currently teaching myself PL/SQL. I have the script according to which uses SO that OTHERS (not a good thing):
  

  undef sv_student_id
  
  declare
    v_student_id          student.student_id%type  := &sv_student_id;
    v_total_courses       number;
  
  begin
    if v_student_id < 0 then
       raise_application_error(-20000, 'A student ID cannot be negative');
    end if;
  
    exception
      when others then
        dbms_output.put_line('Got an exception');
  end;
  /

  When I run the above script and enter the value - 10 when prompted, I get the following output:
  

  SQL> @213c
  Enter value for sv_student_id: -10
  old   2:   v_student_id          student.student_id%type  := &sv_student_id;
  new   2:   v_student_id          student.student_id%type  := -10;
  Got an exception

  What leaves to be desired (like a better message ;))
  
  The questions are:
  
  1. How can I get the outer exception to display the error message specified in the raise_application_error instead of a generic message (such as 'Got to exception')?
  
  2. I want catch exception using something specific, like "when-20000 then" (which does not), instead of the Tote so "than others'.
  
  Thank you for helping,
  
  John.
  
  Published by: 440bx - 11 GR 2 on Aug 14, 2010 08:01 - plural for questions

  1)

  undef sv_student_id
  
  declare
    v_student_id          number  := &sv_student_id;
    v_total_courses       number;
  
  begin
    if v_student_id < 0 then
       raise_application_error(-20000, 'A student ID cannot be negative');
    end if;
  
    exception
      when others then
        dbms_output.put_line('error_code='||sqlcode ||', error_message='|| sqlerrm);
  end;
  / 
  

  2)

  undef sv_student_id
  
  declare
    v_student_id          number  := &sv_student_id;
    v_total_courses       number;
    my_ex exception;
    pragma exception_init(my_ex, -20001);
  begin
    if v_student_id < 0 then
       raise my_ex;
    end if;
  
    exception
      when my_ex then
        dbms_output.put_line('my catch!');
  end;
  / 
  

  and maybe, that

  undef sv_student_id
  
  declare
    v_student_id          number  := &sv_student_id;
    v_total_courses       number;
  begin
    if v_student_id < 0 then
       raise_application_error(-20001, 'A student ID cannot be negative');
    end if;
  
    exception
      when others then
        if sqlcode = -20001 then
        dbms_output.put_line('-20001 message');
        elsif sqlcode = -20002 then
        dbms_output.put_line('-20002 message');
        ...
       end if;
  end;
  / 
  

• Question about how to include the virtual machine output

  Currently, using this command:

  Get - vm | Get-networkadapter | ForEach-Object {Write-Host $_.} The name', ' {$_.macaddress} '.

  Gives me this result:

  NIC 1, 00:50:56:bc:00:1 c

  NIC 1, 00:50:56:bc:00:28

  I'm interested also in writing the name of real virtual machine as well.

  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:1 c
  name of the virtual machine 1, NIC 1, 00:50:56:bc:00:28

  Don't know how to work out of virtual machine name as 'Name' asks also the network card information.

  Try it like this

  $report = foreach($vm in (Get-VM | where {$_.PowerState -eq "PoweredOn" -and $_.Version -eq "v7"})){
      Get-NetworkAdapter -VM $vm  | `    Select @{N="VMname";E={$vm.Name}},
           @{N="MAC address";E={$_.MacAddress}}
  }
  
  $report | Export-Csv ".\test.csv" -NoTypeInformation -UseCulture
  

• S3000-514: how to make the secondary battery to unload everything first?

  Hello world!
  After I ve managed to charge my secondary battery on my laptop (see my previous announcement), I'm now getting another "strange" problem
  With my two batteries in and on the battery the first battery to discharge is the main battery - and not high school!
  This leads to a problem: when I want to change the secondary battery with my combo player, I'm not always have enough power in my battery.
  I have found how to make the battery discharging first of haven´t.
  Can anyone help?

  Hello

  Unfortunately, it is not for me and as much as I know it can not be changed. Probably the electronic power supply is configured to run on this path. Have you tried to remove the main battery and work by simply using secondary? What happens in this case?

• When I type text, the text is in a box, and I can't figure out how to make the box go away. I never had this problem before.

  When I type the text in the latest Illustrator, the text is in a white box. I never had this problem before. I can't find out how to make the box go away. What I am doing wrong?

  Today I tried to close Illustrator and re-boot the computer. It did not help. I went on a second computer video/graphics/animation and open Illustrator here. I did a few tests, and he managed to create the text without a box. Then, I opened my first computer Illustrator file form. The boxes were there. I tried to type the new text, and the box was there. When I open the file it says something about a missing font and a replacement. I tried to use this area to locate the police but couldn't. It's the default font on Illustrator on the other computer. A variant of Myriad. I tried to type in the text with a different font. No box. The default font selected by the Illustrator has apparently a box. I didn't try to change the font because it was going well, and because I didn't know any font came with a box. At first, I did all of the text, which was on a white background, so I don't see the boxes of cream. When I added the background image of the boxes appeared. If the problem is resolved. It was a font with a box.

• How to make the transition to digital in 10g

  Hi all
  
  
  We have 10g database of primary and standby, I have never worked before sleep, customer wants me start switch, can you please let me know how to make the transition to digital in 10g.
  
  
  Thank you very much.

  It's the way I'm following passage in the
  ------------------------------------------------------------

  (1) check that there is no active users connected to databases.
  (2) select message from v$ dataguard_status;
  (3) select protection_mode from database v$.

  Step 1 check if it is possible to perform a failover.

  SQL > select database_role, db_unique_name, SWITCHOVER_STATUS, v database name $;

  DATABASE_ROLE DB_UNIQUE_NAME SWITCHOVER_STATUS NAME
  ---------------- ------------------------------ -------------------- ---------
  PRIMARY OFMSREGT_SIM UNAUTHORIZED OFMSREGT

  SQL >

  If you get NO allow status for SWITCHOVER_STATUS, verify that the standby database is connectivity.

  If the SWITCHOVER_STATUS column displays ACTIVE SESSIONS, you can successfully achieve a failover by adding the WITH clause LOGOFF to the statement ALTER DATABASE COMMETTRE through PHYSICAL standby

  Step 2 open the passage on the primary database.

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP MOUNT;
  SQL > ALTER DATABASE COMMIT TO SWITCH STANDBY MODE PHYSICAL;

  Step 4, check the transition state in the view V$ DATABASE.

  SQL > SELECT SWITCHOVER_STATUS FROM V$ DATABASE;
  SWITCHOVER_STATUS
  -----------------
  TO_PRIMARY
  1 selected line

  Step 5 place yourself in the role of physical standby database target the main role.

  You can switch a standby database physical role ensures the primary role
  When the standby database instance is mounted mode redo apply or open
  for read-only access

  SQL > ALTER DATABASE COMMIT AT THE GRADE CROSSING;

  Step 6 complete the transition of the database ensures the main role.

  If the physical standby database has not been opened in read-only mode since the
  the last time it was started, run the SQL ALTER DATABASE OPEN to open
  the new primary database:

  SQL > ALTER DATABASE OPEN;

  If the physical database was opened read only since the last
  time it was launched, you must close the database waiting for target and restart:

  SQL > SHUTDOWN IMMEDIATE;
  SQL > STARTUP;

  Note: There is no need to close and restart other bases before (not involved in the digital switchover) who are online at the time of the failover. These databases on hold will continue to
  function normally once the failover is completed.

  Step 7 if necessary, restart log apply services on standby databases.
  He must deliver the command FRO repeat apply as:
  SQL > change database recovery managed standby database disconnect from the session.
  or
  And stop repeating applies to give
  SQL > alter database recover managed standby database cancel;

  Step 3 Shut down and restart the former primary instance.

  SQL > SELECT OPEN_MODE FROM V$ DATABASE;

  Step 9 check the synchronization between the primary and standby:

  Primary
  SQL > select thread #, max(sequence#) in v$ archived_log where archived = 'YES' group by thread #;

  Sleep mode
  SQL > select thread #, max(sequence#) in v$ archived_log in case of application = 'YES' group by thread #;

  Stop the former primary instance and restart and mount the database:

  Sense of SWITCHOVER_STATUS
  --------------------------------------------
  The column SWITCHOVER_STATUS of v$ database can have the following values:

  NOT ALLOWED - this is a database of pending and the primary database has
  not been first switched, or it's a back-end database and there is no data pending.

  ACTIVE SESSIONS - indicates that there are active sessions of SQL attached to
  the primary database or emergency that must be disconnected before the
  failover operation is allowed.

  Transition to THE PENDING - this is a database of relief and the primary database
  application of the digital switchover has been received but untreated.

  LATENT pass - the digital switchover has been waiting mode, but has not completed
  and I went back to the primary database.

  Primary SCHOOL - this is a database of pending, any sessions active, i.e.
  allows to switch to a primary database.

  In STANDBY mode - this is a primary database, any sessions active, i.e.
  allows to switch to a standby database.

  RECOVERY NEEDED - this is a database of pending that has not received the
  application of the digital switchover.

• How to change the sequence of films in iMovie Theater

  By exporting iMovie projects in iMovie Theater, the sequence of films is determined by the time of download. How to change the sequence of films in iMovie Theater list?

  HI, breeaz,

  I have not found a way to change the sequence of films shown in the movie screen.

  If you access your movies in the Finder folder, then Ctrl-click on the folder of the theatre, you will find your movies to the poster

  in the alphabetical order in archival records.   I was not able to manually rearrange it.   They can be rearranged in some categories, through the view menu item at the top of the screen and the changes applied to the entire window, but it was not carrying at the display of iMovie.  In General, I'd like to make changes to the structure of iMovie in the finder.  It can cause serious problems.

  Best,

  Rich

• How to make the snow fall go far in the background that I've recently added a newsletter on your part?

  How to make the snow fall go far in the background that I've recently added a newsletter of mozilla to? It appears on things, I feel.

  I can't talk about it. What is an extension?

  You can disable or remove unwanted page extensions modules. Either:

  • CTRL + SHIFT + a
  • Firefox orange (or the Tools menu) button > Add ons

  In the left column, click Extensions. If you don't it spot, perhaps in the appearance section?

• How to make the icons of new office like netflix?

  original title: the desktop icons

  How to make the icons of new office like netflix?

  Access the Web from Netflix site > right click on a part of the page > create a shortcut > click YES to window next question re shortcut on desktop > is she.

  Double-click the desktop icon to access their web Page.

• How to make the Apps?

  Hello - all have a HP Envy 4500, using Central eprint, sched apps print OK, but confused about how to run the applications on demand. For example, the HP Quick forms. I can program, I can look at samples, but how does a print on a sheet desired such a sheet of graph paper on request? I can't understand that one out and also how a post a comment. I don't see any button for either. Another example is the "Universal Crossword" application. I can plan and have them print, but how to manually print a? Why this applies to all applications, how does one just use them on request instead of scheduling. Clickong on the app itself gives just the views of the sample.

  Thanks for any help.

  Hi harrc,.

  Welcome to the Forums of HP's Support. I see that you have questions about the apps you will find in connected HP.

  To print a sample of all HP Quick forms, you can print at the request of the front of the printer. With respect to the remaining applications, it is not an option available on request. For reference, I have included the get started with HP printable.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.