Similar Questions

• ADF: Make a separator Panel occupy all the available height

  Hello
  
  I have a vertical separator of the Panel that contains a set of master-detail tables - captain in the first part and the details in the second. I have PositionedFromEnd = true and SplitterPosition = 200. The idea is that the user must be able to choose to display only the master table, given space to show more lines at once when you click the separator (hide the details table).
  My problem is the total height of the splitter Panel. I would that the breaker Panel to occupy all the available height, regardless of the size of the current screen. But I had no chance to get here. If I give the separator Panel an absolute height through the InlineStyle property, I get a dispatcher Panel that corresponds to a particular screen size and is not adapt to the other screen sizes. If I don't give the separator Panel an absolute height, the separator Panel occupies only a small place of the screen (approx. 300 x 300 pixels).
  
  The separator Panel is surrounded by a group group Layout - Scroll, which is placed in the side of the center of a provision of the Stretch Panel (all the other facets are removed). I tried a few variations of this, for example placing Panel separator directly in the facet of the center of the disposal of the Stretch Panel, but that seems to just do the worse layout (only a part of the separator Panel is visible, and the separator itself is not visible).
  
  My 'path of the component' total or what else you likely to call him, including the page by using the page template, is the following:
  The expandable Panel layout
  * Center facet
  * Decorative box
  Center side
  The expandable Panel layout
  Center side
  Group panels Layout - Scroll
  Formatting Panel
  The expandable Panel layout
  Center side
  Group panels Layout - Scroll
  Separator - vertical panel
  First facet
  Master table
  Second part
  Table details
  
  (The layout of the form Panel is a brother at the disposal of the Panel Stretch mentioned after it, not its container or parent. I don't think that there should be no impact on the behavior of the separator Panel, but I thought I would mention that it is there just to be on the safe side - in case I'm wrong better)
  
  Can anyone suggest how I could make the separator Panel occupy the entire height available (whatever they are), or is - this all simply not possible?
  
  Kind regards
  Andreas

  Try the structure of tris:

  Decorative box
  * Center facet
  * Panel StretchLayout (topHeight =""or topHeight = 'auto')
  Superior facet
  Group panels Layout - Scroll
  Formatting Panel
  Center side
  Separator - vertical panel
  First facet
  Master table
  Second part
  Table details

  The main problem in your structure is this:
  Group panels Layout - Scroll
  Formatting Panel
  The expandable Panel layout
  First of all, panelGroupLayout (scroll) does not stretch his children and secondly - even the panelGroupLayout (scroll) was able to stretch the child component, in this case it could not do so because he had 2 children (but not only).

  Also, you must not use a panelGroupLayout arround (scroll) the panelSplitter because he would not extend the separator and because the tables inside the machine split would treir own scroll bars.

  Published by: Dimitar Dimitrov, October 11, 2010 17:48

• My hard drive is filling up all the available space on my hard drive

  Original title: my drive is 'eat' himself!

  Something happens in my system which occupies all the available space on my hard drive.

  I deleted everything that I possible can, but as soon as I create a space that it disappears.

  There is apparently a function involving my e-mail archives or my installation "restore."

  Recreate the data but do not delete the file/data who is who replaces it.  What has

  happened in the past, but at that time, it was the result of my control one inadvertently

  email replication function... this time I got nothing done to cause this duplication of work.

  When it started to affect my system this time I looked for things to remove and found

  many of my emails in the "sent" folder had been duplicated.  I immediately removed all

  These duplicates and has acquired an important place but in a short period of time the

  disc had been filled again.

  I ran anti-virus (McAfee) and combating malicious programs (Malwarebytes) without finding

  anything that can be causing my problem.

  Thanks in advance for any help.

  Hello

  Try the methods provided following and check if that helps:

  Method 1:

  Try to run the disk cleanup tool and check if it helps:

  Description of the tool in Windows XP disk cleanup

  http://support.Microsoft.com/kb/310312

  Method 2:

  Read the following article and see if it helps

  Computer viruses: description, prevention, and recovery

  http://support.Microsoft.com/kb/129972

  Also check out the link and check if it helps:

  http://www.Microsoft.com/atwork/maintenance/speed.aspx

• How to make a Web site go all the way to the top?

  I want my site to go all the way to the top of the browser window. Like this:
  http://untoldfilehost.com/
  How can I do this?

  in your stylesheet: {margin: 0 ;}}

• May not use all the available space in the data store

  Hello

  We have a HP DL580 G7 Server P410i raid controller with 8 x 1 TB HDD.

  I create a raid 1 with 2 hard drives (1 TB) and raid 5 with 6 hard drives (5 TB) and install ESXi 5.1 in the first data store (1 to).

  After installation when I tried to create the 5 TB data store, (ESXi detects and displays the space available 5 TB) it does use that almost 2.5 TB! and may not use all the space

  I also installed the ESXi 5.5 but still no luck.

  This Ko seems to apply to you: http://kb.vmware.com/kb/2006942

• Windows XP, the power option button is gray and does not work. The hiberfil.sys file occupies all the available space.

  I can't install the updates, especially antiviruse updates and everything is slow because the hiberfil.sys file is huge.  I can't Devil Hibernate because the power button is gray-no matter how or where I'm trying to open it.  Also at the same time, the sound disappeared and the sound card displays a yellow button.  Difficult to use the computer and dangerous online.   Help!
  Eve

  Hi EveMontgomery,
   
  You can disable hibernation by running the hotfix given below article tool to solve this problem:
  How to disable and re-enable hibernation on a computer that is running Windows
   
  To solve the sound problem, follow the three steps solution given in the link below and see if this helps you.

  No sound in Windows

• My panels disappeared.  How to make a comeback?  (I all checked, including the histogram, layers, actions and adjustments)

  My panels disappeared.  How to make a comeback?  (I all checked, including the histogram, layers, actions and adjustments)

  Hello madeline,

  Please check that you have selected the correct "essentials" workspace, if you already correct then try to restore Photoshop preferences to default.

  Steps to follow:

  To re-create the Photoshop preferences files, start the application while pressing Ctrl + Alt + Shift (Windows) or command + Option + shift (Mac OS). Then, click Yes to the message, "Delete the Adobe Photoshop settings file?"

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Make sure that wire you all the inputs and outputs of your node library function call?

  This document says "make sure that wire you all the inputs and outputs of your node library function call.

  http://digital.NI.com/public.nsf/WebSearch/7253D2F0D91F68058625752F005AB672?OpenDocument&submitted&&...

  But all the terminals on the right side of the call library node considered "outputs" referred to in the foregoing statement?

  This same document continues to show the right way to allocate memory with this illustration and in the illustration, the right "outputs" are left without junctions.

  

  Am I right in assuming that the only terminals that count as outputs, those who use the code of the DLL (modify) as output?  If it is true, then all other terminals output associated with the values entered alone so don't really account as outputs, correct?

  In the parameter call-library configuration screen there is a "Constant" check box and the help that he wrote "indicates whether the parameter is a constant."  What is this box? for me in the setup of the DLL call

  Finally, assuming that a call from the DLL that is supposed to write in these five outputs, is it legitimate to use constants like this to book a space of memory for the output values?

  

  How about if local variables associated with the output terminals are used instead?

  

  Despite the linked document, it is necessary to connect the corresponding entry for simple scalar output parameters (for example a digital). LabVIEW automatically allocate memory for them. If you do not want the entries for all the output wire anyway, there should not be no difference between a constant and a local variable; I would use a constant to avoid useless local variables.

  For settings that are only entries, there is not need to connect the outlet side. It's a bit simplistic since all parameters are entered only and get one result (other than the return value), you pass a memory address and modify the content to this address, but LabVIEW manages this dereferencing pointer for you. If you want to really get into the details, learn more about pointers in C.

  The "Constant" check box acts as the qualifier "const" on a c function parameter. It tells the compiler that the function you are calling will not change this setting. If you call a function prototype includes a const parameter, then you must mark this as a constant parameter when you configure the call library function node. Otherwise, I wouldn't worry on this subject.

• I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  I have a Hp Pavilion Media Center Edition 2002 running. How will I know if I have all the patches and updates, I need? Also is free upgrade to the edition of 2005?

  Hi Philofduluth and thanks for posting.

  There is not a free upgrade for Media Center 2005. If this is something you would like to do, I contact your OEM manufacturer and ask if there is a software upgrade, they can provide you.

  If you have all the updates that are available for your system go to http://update.microsoft.com . Here, you can see all the latest reviews and optional updates that may be available to you and make install.

  I hope this helps. Let us know if you have any questions.

  Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to make a label (javafx) to display the current time dynamically?

  Hi all

  How to make a label (javafx) to display the current time dynamically?

  I have not found a Type of event related to the time in javafx API.

  Please give me some suggestions. Thank you!

  Sage

  There are lots of examples of JavaFX clocks available, for example https://gist.github.com/jewelsea/3388637 or http://blog.crisp.se/2012/08/09/perlundholm/an-analog-clock-in-javafx

  For a simple label displaying the time, the simplest thing is to create a Timeline with duration 1 second and the number of indefinite cycle, which triggers an event handler that updates the label:

  final Label clock = new Label();
  final DateFormat format = DateFormat.getInstance();
  final Timeline timeline = new Timeline(new KeyFrame(Duration.seconds(1), new EventHandler() {
       @Override
       public void handle(ActionEvent event) {
            final Calendar cal = Calendar.getInstance();
            clock.setText(format.format(cal.getTime());
       }
  });
  timeline.setCycleCount(Animation.INDEFINITE);
  timeline.play();
  

  (If you use Java 8, use the new time API, which is much more pleasant than calendar.)

• I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1. Still no sound.

  I have no sound when playing my clips by adobe first 12 elements. How to fix this? I checked all the audio levels and there is no mute etc. I've updated to 12.1, but still no sound in clips. Not even on the old files that are used to work.
  

  Bfun

  What operating system is running your first items 12/12.1? Can we assume that this audio reads OK

  on the same computer when you use a computer independent of Premiere Elements drive?

  What are the properties of these clips that have worked before, but don't know regarding sound

  For now, I will assume that you are working on Windows 7, 8 or 8.1 64bits.

  Have you checked the settings change preferences/Menu/Audio ASIO hardware? You have all 3rd party audio devices integrated in your IT environment?

  Please delete the Adobe Premiere elements Prefs file and, if it does not, then all 12.0 folder in which the Adobe Premiere elements Prefs file exists. Is the path to 64-bit Windows 7, 8 or 8.1

  Local disk C

  Users

  Owner

  AppData

  Roaming

  Adobe

  First Elements

  12.0

  and in the 12.0 folder, is the file Adobe Premiere elements Prefs that you delete. If this does not work, then delete all 12.0 the folder in which the Adobe Premiere elements Prefs file exists. Make sure that you work with the Option "Show hidden files, folders and drives" of the current folder so that you can see the full quoted path.

  You have the installation files or the installation disc with the serial number purchased in case we need to use to uninstall/reinstall?

  We will follow your track to the top.

  RTA

• Firefox 8 ads make look it good with all the possibilities, but when installed it's like the old Firefox and the news is simply not there.

  Firefox 8 ads make it look good with all the possibilities. But when installed it's like the old Firefox and the news is simply not there. Why bother to install the most recent?

  Right-click the menu bar and uncheck the option menu bar.

• How can I get my contacts and all the other stuff I had on the old email?

  Original title: I changed my email because they said my old email was invalid... How can I get my contacts and all the other stuff I had on the old email? They said, it has been deleted

  If my email isn't valid how I used it?

  Hello

  1. which email account you are referring to?

  2. What is the version of Windows installed on the computer? For example, Windows 7, Vista

  Please answer these questions and provide additional information so that we can better guide you.

• How will I know if I have all the drivers, my computer needs to work properly?

  Original title: hard drive

  How will I know if I have all the drivers, my computer needs to operate correctly

  Hi albertogon15,

  Information devices are listed in the Device Manager. If there is no fringe on any of the items in the Device Manager, it means that the device driver is working properly.
  See what is Device Manager?
  See also, get help with Device Manager errors.

  You can also check the Windows updates or visit the device/system manufacturer to see if there are updates available for the devices connected to the computer.
  See automatically get recommended drivers and updates for your hardware

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to display this window that lists all the devices of storage connected to my PC?

  How to display this window that lists all the devices of storage connected to my PC? It lists each device, how much space is used and how much is free? I sometimes open it by accident, but I can never find it when I'm looking for it.

  original title: storage devices

  Beginning

  Control Panel

  If you the small icons view do the following:

  Administration tools

  Computer management

  Storage

  Disk Managment

  If you have the category view do the following:

  System and security

  Administration tools

  Computer management

  Storage

  Disk management