How to make a transparent png with a noise?

Similar Questions

• How to make a transparent background Photoshop elements 13

  How to make a transparent background Photoshop elements 13

  I opened a picture of a flower and does the following:

  1. Open the photo file
  2. The tool magnetic lasso to select the foreground
  3. Place the selection on its own layer (layer > New > layer per copy or CTRL + J)-this will be 1 layer
  4. Delete the background layer
  5. Went to file > save for web. PNG-24, checked file format forcing boxes proportion & transparency
  6. Save the file in a folder on the desktop.

  Open file with flower in PSE.

  Photo b/w open to post-secondary studies

  Flower slide the Photo tray until the work area

  If these steps do not work for you, try copying and pasting the flower to the new destination

  

• Make my transparent .png file?

  Can what iMac software I use to make my transparent .png file?

  Personally, I use Adobe Fireworks, but I believe that Photoshop will work as well. Alternatively, you can use a snippet.

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• How to make a simple video with my computer ' s web cam?

  I recently (10 minutes ago) asked a simple question on how to make a video.  For five of the most wonderful years of my life, I have designed critical systems of path for launch Pads 39A & B, the vehicle Assembly building and the robot that went out the candle to the pad.  On paper, a critical path system explained how the engineer, design and build a structure.  In this case, it was activities separate from about 3400 and when, how and how long these activities were to each other.  At the time where the Commander.  I worked and which had been granted to these contracts, had developed the method of the path critical following the guidance system of the Polaris Missile, which was incredibly hard to get a handle.  At the time where manned Apollo lunar Mission has been in place, I was one of only ten people in the world, who knew the process.  We needed honest, some answers to our questions or it would take years to accomplish what Stephen Hawking characterized as "the unique accomplishment largest in human history" you gave me answers to my questions by these 'engineers' for Microsoft on the use of a webcam and had implemented them, would not be there was a second launch of Apollo because the first three astronauts would be dead.  How to make a simple video with my computer ' s web cam?     Al wood

  http://www.WikiHow.com/use-webcam-on-Windows-Movie-Maker

  Movie Maker: http://windows.microsoft.com/en-us/windows-live/movie-maker

  Not tested.  Instructions could be for the old version of Movie Maker, but they probably give you the basics.

  (It's a way of many - that the answer does not depend on your OS, but on the software you use to interface with your webcam.  Camtasia?  Skype?  etc and so on...)

  In addition, to find this information is quite simple.  Once I decided on what software to go with in my response to you (I chose Windows Movie Maker 12 because it's easy to get, free, Microsoft, similar to products that were previously found with Windows) I did a simple search on Google:

  use Windows Movie Maker 12 with webcam

  https://www.Google.com/#q=Use+Windows+Movie+Maker+12+with+webcam

  or more demonstratively:

  http://lmgtfy.com/?q=Use+Windows+Movie+Maker+12+with+webcam

  The first hit seems to be a video market even helps you to download and install the Windows Movie Maker 12 application...

• How to make a live website with BC after publication?

  How to make a live website with BC after publication?

  Hello

  You need push direct site, in the site admin dashboard, you will get the option "launch the Site.

  Please order this video:

  lyst-and-Muse-creating-and-publishing-sites/ http://TV.adobe.com/watch/Introducing-Business-Catalyst/Getting-Started-with-Business-CATA

  Thank you

  Sanjit

• How to make columns of text with adobe muse

  Hi, how to make columns of text with adobe muse (like InDesign)?

  As Brad has already indicated, the columns are a difficulty.

  Set a text box to separate visually in separate (with a nice gutter) columns does not seem so difficult, but the problem lies in how to manage the flow of text in regards to positions, simple lines ugly upstairs and down a column, deliberate column breaks, how to connect to the text of subsequent block etc. The developers of W3C and browser have not yet agreed on this issue. (Look for the clear green statutes in the table: http://caniuse.com/#search=columns)

  As a matter of fact, Adobe has proposed and developed an alternative for wounds and flawed of current columns, at the W3C long meetings: 'Régions' (which could also leave the text to "wrap" around a box or even an irregular shape). But their effort was in vain. ' Technically too much, too soon, to be treated by the mobile browser engines ", was the comment of Google . So the W3C put this contribution on the shelf.

• How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  How to make a sine wave with a series of spherical objects (symbols of Yin/Yang)?

  Do the yin/yang. Shift drag a copy some distance away. Create a blend between the two stages specified. Draw another line. Use the effect > transform > Zig - Zag with enough height and number of steps and smooth anchors. Expand the appearance of the effect. Select the mix and the wide range and the object > blend > replace Spline.

• How to make a line intersect with a path at random angles?

  How to make a line intersect with the anchor point of a half circle when you want the line to continue beyond the anchor point of the half circle at an angle to randomly?

  Now that I saw your picture, I understand the problem. You must make the careful construction work.

  Take a look at this:

  

  Start by drawing your circle. Drag the ruler guides (here dotted lines) so that they snap into its Center C.

  Drag another landmark of rule to your point of origin O.

  With the Pen or line tool Segment a line of O to T A. setting by the eye as precisely as possible with the end of it A directly selected.

  A copy of the line OA rotate 90 °. Using smart guides, drag the new line until it crosses the center of the Circle C.

  Direct, select the end of your original line and move it to T until the smart guides say "cross".

  Now, with the selected OA line use the scale tool. O-click and drag to 45 degrees by holding the Shift key. Your line will extend over its own length.

  In order to take account of the OA line across the circle just use the Reflect tool. Select the line, an Option, click the horizontal guide and copy reflect across the horizontal axis through the dialog box.

• How to make a transparent background in PNG file

  I would like to make a PNG image with transparent background rather than the white background. See this link for the image:

  http://www.drifterandthegypsy.com/wp-content/uploads/2012/11/lookatthebrightside_11.jpg

  I have a very old program Photoshop Photoshop 7.

  I tried clicking on save for Web and selecting PNG-24 format and check the transparent box, but it did not work.

  Hello

  Try something like the following:

  (click on the screenshots below for more great views)

  1. Select the magic wand and put the same settings in the toolbar options as shown below.

  Click on the white area outside the yellow circle with the magic wand tool.

  

  2. go select > modify > Expand, and enter 1

  

  3. go in Edition > cut

  

  4. go in Image > Trim and tick transparent Pixels

  

  5. go to file > save for Web and choose the verified with transparent PNG-24 format

• How to create a transparent png of sem

  I created a rectangle with corners rounded in Fireworks and I would like to save it as a transparent png, so that the central part of the rectangle is transparent, but the outside of corners is not transparent.  This is so that I can overlay on a background image to a Web page, which makes the image have rounded corners.  How can I do in the middle of the rectangle is transparent?

  Make a standard rectangle that is the same size as your rounded rectangle (or whatever it is, to display). The information panel is an easy way to ensure that the size and location is accurate.

  Use the layers panel, move the rectangle below your rounded rectangle.

  Select both objects, then go into the menu modify > combine paths > Punch. It will drill a hole of rectangle to round in your rectangle corners.

  (Punch punches of the superior shape in the lower order, that is why your existing rounded rectangle should be above your new standard rectangle in the stack of layers).

  Something like this (where I have the biggest standard rectangle rounded rectangle). Half upper picture shows the two individual forms. Half lower shows the standard rectangle with the rounded rectangle knocked out of him.

  

  But... what you can do is to select your image, copy (Ctrl-c), then select your rounded rectangle (or any shape), then go to the Edit menu > paste inside (or Ctrl-Shift-V). (It's a good technique when your image is exactly the size you want, you want just rounded corners).

  Or, you can do a white rounded rectangle, place it on the part of your picture that you want to display, select the rectangle and the image and go to the Edit menu > mask > Group as mask. (It's a good technique when your image is larger than the part that you want to display, but you don't know exactly what you want to do).

• How to make a transparent background when editing

  Hello

  I was wondering how to get a transparent background in flash.  I did a lot of research and have seen many forums, but I don't want my file to export to HTML.  Is it possible to have a transparent background, with some having to have a HTML file?  I try this enter into Camtasia Studio, but there is a white rectangle behind the animation, blocking all the rest.

  Thank you

  Orion31

  You export a video to enter in Camtasia? If, therefore, in the export options video there is a checkbox to say to ignore the color of the scene and to generate an alpha channel. Don't say to compress the video in Adobe Media Encoder, just take the MOV file in Camtasia.

  If you say that Camtasia supports importing of SWF files, then it would be Camtasia to make the background transparent.

• How to make the printer work with the new Windows 7 laptop?

  can someone me please help... my printer is windows xp and I just got a computer laptop windows 7, how can I make my printer work with my laptop!

  Thank you
  need help with my printer

  Hi gingerbabe001,

  To set up and install your printer, see the link below.

  http://h10025.www1.HP.com/ewfrf/wc/documentSubCategory?tmp_task=setupCategory&cc=us&DLC=en&LC=en&OS=4062&product=1153754&sw_lang

  Good luck.

• How to make a transparent brush stroke and less text/object

  Hello, I applied some grunge strokes on top of text. I want less to the features of the text so that the model becomes transparent through the text. I tried a multitude of different solutions, but I do not get the results I'm looking for,

  I use Illustrator CC.

  Thanks in advance

  Group the brush strokes.

  Choose the blows of brush and the thext behind it.

  In the transparency Panel click the button mask to make.

  Play with the Clip and invert mask options.

  You can change a complement to the mask when the mask is selected on the right.

  You can change your text when the box is left selected.

• [Adobe Muse] How to make a horizontal menu with drop down horizontal?

  Hi all

  I would like to make a horizontal menu, but have drop them the low go horizontally rather than the default and the vertical level, like the model I made in photoshop. Can someone help me with this? Thank you!

  

  My recommendation is to watch the following video of Adobe's Terry White, explaining how to make a custom horizontal menu (use the techniques and adapt):

  How to design a Custom Mega Menu in Adobe Muse CC - YouTube

  If you have any questions after watching, will try my best to answer, but feel that his explanation will be much better than any I can give here in writing.