How to make a vectorized into a single line drawing open way?

Similar Questions

• How to make a vector file of Adobe CC draw on the IPAD in Adobe Illustrator CC on the PC?

  As the title says.

  I designed a sticker on Adobe draw CC and I need to upload it to a website like CMYK, 300 DPI and a specific size in inches.

  To save the file, I need to transfer it to the PC first because the CC draw Adobe does not allows you to select the features to save a file.

  I can 'send to adobe illustrator' or 'send to adobe photoshop' option on the ipad, but it seems that it is not a vector when file sent.

  Any ideas?

  If you send the illustrator of the draw, it will automatically convert to vector illustrations.

  1. make sure that you are connected to the PC and the CreativeCloud iPad with the same subscription that you use to launch Adobe Illustrator.

  2. with Internet on iPad, simply click: send to Illustrator.

  You even don't need to have Adobe Illustrator running, it should appear on your PC automatically.  If it is already running, the image will transfer as vector illustrations.

  If you have layers in the draw, they will appear as layers in Adobe Illustrator as well.

  You can then continue your design in Illustrator.

  (If you use Photoshop, it will stay in a layer, raster format)

• HP Officejet Pro X476dw (nextworked-Windows 7 Pro) how to scan multiple pages into a single file?

  Does anyone know how to scan multiple pages into a single jpegfile?

  When you scan a document of several pages in a file on a network each page gets its own jpeg image scanend file.

  HP standalone scanner allow generally allows you to add the multuple scans in a jpeg file.

  Any help much appreciated!

  Thank you

  Joihn

  Hello

  Well, I don't know how you can read many jpeg files into a SINGLE file. Put scanned images in a folder is a logical way to keep them in one place. From my understanding single jpeg image may be a ONE page document, but many jpeg images cannot be concatinated to be a multiple page document. We can use images, software publishing to put them in a single document, but still only one page (each image is smaller). Using pdf output, you can concatenate/merge a lot of images in a sinlge multi-page file.

  Kind regards.

• How to scan multiple pages into a single document using the CanoScan LiDE 200?

  How to scan multiple pages into a single document using the CanoScan LiDE 200?

  I can't find a way to get them to analyze all the time, or a way to put together them later.

  Hi dagda24,

  You can scan multiple pages into a single document with the scan PDF option.  Use the following steps to do:

  1. open MP Navigator.

  2. click on a Clcik.

  3. click Save to PC.

  4. change the Type of PDF file to PDF (multiple pages).

  5 other changes, as needed, and then click Scan.

• How to scan multiple documents into a single pdf file of ADF on my MX922?

  How to scan multiple documents into a single pdf file of ADF on my MX922?

  
  

• Over my OFFICE JET PRO 8600, how to scan multiple pages into a single document?

  How to scan multiple pages into a single document?

  Thank you

  Hi REDFIERO,

  I can help you scan multiple pages to a file.

  If you use a Mac, you can perform your analysis with HP Scan and when you save the file, choose PDF. Under the PDF Format you chose you will see the option to save all pages in a single file.

  If you are using a Windows operating system, follow the instructions in the following document, Scanning of multiple in a single PDF Pages.

  I hope this helps.

• I try to combine a picture of my sister with a picture of a poem next to her. How to combine the two into a single photo?

  Paint or Windows Photo Gallery

  I try to combine a picture of my sister with a picture of a poem beside it, how to combine the two into a single photo?

  If you have the poem recorded in an image format,
  the following freeware can create a side by side
  Panorama.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download IrfanView
  http://MajorGeeks.com/IrfanView_d4253.html
  (filename: iview433_setup.exe)
  (uncheck if you don't want Google Chrome)

  Download plug-ins too...

  IrfanView plugins
  http://MajorGeeks.com/IrfanView_PlugIns_d4908.html
  (filename: irfanview_plugins_433_setup.exe)

  When the program is installed... read more...

  Open IrfanView and go... Image / create the Image of the Panorama...
  (this will open the screen to "Create a panorama image")

  On the screen to "Create a panorama image"... left click on the add images"" button.
  (Displays the 'Open' screen. Now, drill down to the
  the folder that contains your saved Photos of veterinarians.

  Now... click left (highlighted), the two images, you want to join.
  (you can select more than one if you hold down your Ctrl key)
   
  The two images highlight... left click on the button 'open '.
  (Or... you can add the images one at a time... which is always easier)

  Now, go back to the screen "Create the panorama image.
  and the file names of the selected pictures need to be in the
  Field "Input Images.

  Now with the names of two files in 'Images of entry' field...
  You can left click on the button 'create Image '.

  (the positions left and right of these images can be swapped in)
  selection of a file name and using the "mount image" / "Move."
  Images down"buttons...)

  Now you should see a display of the combined image.
  Reach... File / save as...

  Choose a backup location / enter a file name / choose a format...
  On the left, click on the button "Save..."

• How to import a vector editable in Illustrator to draw I was working with on my portable version of Illustrator? (I'm trying to leave my laptop at home and use my iPad to show customers the work and edit them in place with them.)

  How to import a vector editable in Illustrator to draw I was working with on my portable version of Illustrator? (I'm trying to leave my laptop at home and use my iPad to show customers the work and edit them in place with them.)

  Hi,

  This workflow is not yet possible to the draw. But it has been a very popular feature request lately and I know that the team is studying how it could be integrated into the app.

  I will definitely pass your comments along to the team.

  Sue.

• How to make the top sites page appears when I open a new tab? Why have I not of "buttons" to pin a top site of the page tab?

  When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?

  Here is some additional information on the configuration of the new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:

  "3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions

  If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?

• How to make the default text size and line spacing in small Sticky Notes?

  How to make the default text size and line spacing in small Sticky Notes

  Hello

  I suggest that you try the method below and check if it helps.

  Method 1: analysis of auditor of file system (CFS)

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. To perform a scan of the SFC, check out the link: https://support.microsoft.com/en-us/kb/929833.

  Note: the steps for Windows 8/8.1, works perfectly with Windows 10.

  Method 2: clean boot

  A clean boot is executed to start Windows by using a minimal set of drivers and startup programs. This will eliminate software conflicts that occur when you install a program, an update or when you run a program in Windows. Follow the link to perform the clean boot: https://support.microsoft.com/en-us/kb/929135.

  Kind regards

  Angelo bar

  Microsoft community

• HP ENVY 5540: HAVING HP ENVY 5540 HOW TO SCAN MULTIPLE PAGES INTO A SINGLE PDF

  Trying to scan multiple pages into a single pdf using HPEnvy 5540. Seem to be only able to do it in a single pdf page.  Does not work how to do do.

  Hello

  For Windows, please download and install the following software and install on your computer.

  FTP://FTP.HP.com/pub/scanners/HPScanExt/HPScanExt.msi

  After this, please use it to scan.

  You can also try (for Windows):

  Double-click the icon of the printer on the desktop,
  Select scan a Document or Photo,
  The first page on the glass (face-down)
  Check out the options (size, dpi...) and select scan the document to be filed,.
  Click on Scan - machine will scan the first page
  Delete the first page on the glass, put the second page,
  Click + (plus sign), it sits on the left side of a red x
  Machine will sweep the second page, put 3rd page on the glass and click on + again... until the end and then click Save
  Click done after save

  Kind regards.

• How to make a vector shape / layer in a mask without pixelation it?

  Watching Nigel French on Lynda.com transform a form (using the custom shape tool) in a mask, but following the same exact procedure he does not work for me:

  Select a new layer, press U, select Custom Shapes, has chosen to target record, size and release.

  Voila! In the video, he gets a layer mask on this new layer. I just get a new layer - and it's driving me crazy. He goes on to pen the layer to soften the edges, which, if it is possible, can be useful.

  I tried half a dozen variations such as drag and drop, creating a new layer from a solid fill color and me cannot work out how to make the shape in a mask. Can someone tell me what I am doing wrong? I'm guessing that there is a setting I'm missing somewhere, maybe?

  just to be clear, I know that I can put a mask on my vector form by clicking on the icon of the mask or of the layer > vector mask > current path, but this is not what I'm asking. I want to know how to make the shape I paint in a mask on a layer, we layer (as in the right of it).

  If you can see, the video is here at the minute mark 7: create a logo with some shape layers in the Photoshop course for designers: shape layers

  The transcript over this article reads

  I want to fill the shape with white. So I'll do my foreground color white and press the Option or Alt + Delete as follows, and I also want to then adjust the opacity. I'll take the opacity down and here's something I want to do. I would like to pen, so that make us it sweet. Now, you may be thinking, wait a minute, all these layers of shape are vectors, how can they be feathered? Surely, they cannot be softened. Well, actually, they can.

  If we go to the masks Panel, I can simply increase the amount of feathering and you can see as I do he soft all edges in this path. Now another problem I have is that the inside of this shape of the target is displayed in the center of the bagel and we do not want that to happen. So I could spend time trying to position it just so, so that we don't see. But easier than that I'll just double-click my masks to make it smaller.

  Without having read what you have written here, I just Ctrl + click on the content icon in the palette shape layer layers to select the transparency of the layer.  This selection allows you to hide a layer in the layer to hide targetint then click on the Add layer mask in the layers palette.  The current selection will be used to create the layer mask.

• How to combine 50 documents into a single pdf file?

  Hello

  I just bought Adober pdf pack, but they did not say that I could combine 12 documents into a single pdf file. It seems so crazy so I can hardly believe it's true! I have just recevided a PDF with 70 documents into a pdf file so I wonfder wht program should I buy instead of this joke. I f I only 12 pages, it is not a problem to send in the form of documents in an e-mail as I repeatedly, doen. The pdf file must be exactly for those who need to send a large amount of files in a pdf file that is easy to live. Anyone out there who knows if I can change my pack to the one I need?

  Thank you

  Monica

  Hi monicaf5812809,

  The Pack of PDF from Adobe allows only to combine 12 files at a time, but you can batch convert and then combine these files more wholesale/combined as needed.

  The other option is to use Acrobat, which does not impose such a limit, because processing takes place on your desktop and not via an Internet connection. If you want to try Acrobat, you're welcome to-you can download a 30 day trial of http://www.adobe.com/products/acrobat.html.

  Best,

  Sara

• How to make a ftp on a single command line?

  I need to transfer the file mydatafile.dmp to 10.100.78.45 dump_dir directory/mydir/from the machine, using the binary mode.
  
  In principle that it would look like

   $ftp 10.100.78.45 username/pwd cd /mydir/dump_dir hash bin put mydatafile.dmp

  I need to run the ftp in nohup and is I want the ftp command in a single line. No idea how I can do this?

  This isn't really the forum for this, but...

  What shell are you using? Something like this should work in bash & ksh:

  FTP - nv<>
  open 10.100.78.45
  quote the user name
  quote pass password
  CD/mydir/dump_dir
  bin
  put mydatafile.dmp
  close
  Good bye
  FO %

• How to make the query in a single query? No Union only please...

  Hello

  I have a series of about 18 queries that find charges in many scenarios. I wanted to have a single query to do this. which displays the result in a single line. Is it possible, I heard analytical functions are good options, but I am new to Oracle. Please help me.

  Select count (*) total_count emp; -100

  Select coun (*) MGR_count emp where job = "MGR" - 10

  Select count (*) dept_count emp where deptno in (10,20) - 75

  output...

  ----------

  TOTAL_COUNT MGR_COUNT DEPT_COUNT
  100                                   10             75

  Thank you

  Hello

  Here's one way:

  SELECT COUNT (*) TOTAL

  , COUNTY (CASE job WHEN = END "MGR", 1) AS mgr_count

  , COUNT (CASE WHEN deptno IN (10, 20) THEN 1 END) AS dept_count

  FROM table_x

  ;

  Instead of putting the conditions in a clause WHERE (where they would exclude whole lines), put the conditions in a CASE expression, where they affect only this column.