How to make an application of office ready for Tablet

Similar Questions

• How to make photos of my printer-copier for my processor?

  How to make photos of my printer-copier for my processor?

  Hello

   
  1. what version of Windows are you using?
  2. What is the brand and model of the printer-copier?
   

  We need a scanner to digitize images and save them on the computer. If you have the application associated with the printer-copier, then use the same to scan the images.

   

  You can also use Windows Fax and Scan.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Windows-fax-and-scan

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.

• How to make a disk image of work for my windows 98se boot (original is long dead)

  How to make a disk image of work for my windows 98se boot (original is long dead).  I have a copy of Windows 98SE bought new off the years of the plateau.  I now have a 64-bit system, so I can't run it natively, but I discovered that I can't even run at all, because I don't have a working bootable floppy!  I thought that the CD is bootable, when I used it a long time ago, but now it does not start if I have used the disk? Anyway, can I get a driver Microsoft w/CD install/bootable disk, or do I have another decent resource?

  Thank you. You can contact me to the * address email is removed from the privacy *.

  http://www.bootdisk.com/bootdisk.htm

• How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  How to make a stationary State (or equivalent) for the form to change color and reveal some hidden above text...? is there a widget I could use?

  There are many solutions. A more simple: put the text and the items colored in the back and put the 'shape' on it. Configuration of the 'shape' become transparent in a stationary state.

• How to make an application

  can you please tell me how to make a blackberry app.,

  Hey

  Using this link to set up your dev environment:

  http://supportforums.BlackBerry.com/T5/Java-development/setting-up-your-development-tools-for-BlackB...

  And this tutorial will guide you through developing your first application for:

  http://supportforums.BlackBerry.com/T5/Java-development/writing-your-first-application/Ta-p/442771

  Basic knowledge of java, j2me specifically will surely help you

• How to make your own Board BNC connector for 37 pins PCI-6010?

  This is first time I am doing data acquisition and the BNC-2110 present can be connected to PCI-6010. How to make a Board for it?

  I'm not sure what you mean by "some"; The BNC-2120 exposes all channels HAVE and AO on connector 0 of a standard feature of E, M or X series.

  • Eight BNC connectors are for eight differential channels of I. For example, for the BNC connector labeled 'I 0', the Center connects to the 'I 0' pine and the outside connects to pin 'HAVE 8'. (The BNC-2120 probably would not be a good choice for someone who wanted to use the channels in unbalanced mode).
  
  
  • Other two is for the analog output; the centres are ' AO 0' and 'AO 1' and transmissions are related to "AO GND".
  
  
  • There is another connector BNC for PFI 0; all other PFI (with the exception of the 10, 11 and 15) are broken down as screw terminals.
  
  
  • Other BNC connectors connect what either directly (the unit is powered by the + 5V line but otherwise works autonomously, and the "user defined signals' are connected to terminals to adjacent screws).

  It seems like it wouldn't be difficult to have a cable that was going on a PCI-6010 the 37 pins on the connector 68 pins on the BNC-2120. I'm a little curious as to why we do not have one. Possible reasons off the top of my head which may explain why not:

  • cards PFI/description would be a mistake (for example, on a series of E/M/X ' CTR 0 SRC "PFI 8; on the 6010 is PFI 0.)
  
  
  • No digital lines (E/M/x series P0.0 P0.7 via are independent; on the P0.0 6010 P0.5 and P1.0 by P1.3 are shared with PFI lines)
  
  
  • Confusion about being able to connect to other devices that we sell with connector d - SUB 37 pin, but who do not use a compatible pinout (for example, the PCI-6239, PCI-6510 or the NI 9237). Here again, a PCI-6703 also uses a 68 connector pins, but has a completely incompatible pinout as well.

  But it seems that those who would be pretty easy to deal with, because it is useful to be able to connect to the BNC-2010. Maybe it's an idea for the Exchange of ideas information Acquisition?

  Anyway, if you want to have pushed BNC for everything on your Board of homebrew will need you:

  • 8 or 16 BNC connectors to HAVE, depending on whether you want single-ended or differential. For differential, the centres are GOT by AI 7 0, and transmissions are AI by AI 15 8. For asymmetric, the centres are HAVE 0 through 15 AI and transmissions should all connect to GND AI.
  
  
  • HAVE a sense (I think that you only need this if you use channels Nonreferenced Single - Ended (NRSE). See also: noise considerations for analog signals and field wiring.)
  
  
  • Two for AO (centers are AO 0 and 1 AO, outers times connect to AO GND).
  
  
  • Ten for PFI/digital lines. Outers will connect to GND D.

  Up to a maximum of 29. You want maybe less, depending on your application.

• How to make a copy of windows 7 for my laptop

  I have a HP Pavilion Entertainment PC with windows 7.

  If I need to reload the OS on the pc, where can I get windows 7 to go because I don't have a cd/dvd with the operating system, when I bought the machine.

  I can make a cd... If Yes, where can I get the download.

  Thank you very much.

  kielmaedel

  How to make your recovery HP discs, these before do you recover the operating system from the hard disk, the use of high quality DVD + R media

  http://support.HP.com/us-en/document/c01895783#WhenCreate

  How to recover the operating system from the hard disk using F11 at startup.

  http://support.HP.com/us-en/document/c01895783#RestoreWithoutWindows

• How to make a backup recovery disk (usb) for my new XPS8700?

  Hello

  Please bear with me as I'm pretty much computer illiterate.

  I just bought a Dell XPS8700 with Win8.1 for my partner for Christmas.  It came with 2 TB HD cache & 32 GB of SSD.  Round 6 months. from now on I intend to buy a 120 GB SSD for upgrading its system & will use for the operating system.   I do not know how to do this (I have an idea... looked. vids online, etc.), but what I need to know is > how to make a backup for its new computer recovery disk (so that I can put it aside for when I get the new SSD).  I don't even know if that's actually what you still call it (recovert disc?) or if it is called "backup of factory drive?

  Basically, I want to put Win8.1 on a USB key so I can use this more later to reinstall it on an SSD.

  I bought a Lexar 32 GB USB (3.0) to use for this.

  Can someone "please" give me a step by step on how to go about doing this?

  Thank you!

  • Video tutorials
    • Creation of recovery with Dell backup and restore 1.5 media
    • Backing up data using Dell Backup and Recovery 1.5
    • Windows restore after a Crash with Dell backup and restore 1.5

• How to make an application that can be accessed by another application?

  Hello

  I want to make a request that can be used anywhere as if we were able to do using Applicationmenuitem in an earlier version of BB. With the help of applicationmenuitem, we were able to call functions of the application. I want to do something like this, how is it possible in the cascades?

  The framework of the invocation is the way to do it today.  Your application can register to treat a certain type of file (mime type or extension), and then may be an option to the user when they attempt to open this type of content from another application.

  There is no way to inject specific menu items that you can with ApplicationMenuItem.

• How to install our application anroid office or our Web server free bb app world

  We have a local app we wrote and 2 flavors, a version of android and bb.

  None of these is deployed via the markets, we just give our customers/users internal url to our server where the android apk and bb jad files.

  If I have the reader android app

  (but I can not find the reader blasted app to app World of bb well, is - it is not released yet?)

  installed on my playbook, is it possible to install our version of the application from the server also android steering to the apk file, or perhaps my office where is my apk file?

  the android version of the local app is significantly better than our version of bb so I would run the android version assuming it works well, and I wanted to see how it works / looks that's why I'm writing this

  Thank you

  Hello
  It is not yet possible to run Android Apps on the Playbook. RIM will implement this function towards the end of this year (probably in Q3/4).

• How to make an application of third party added to my Apple TV (3rd generation)?

  I want to use VidAngel on my Apple TV (3rd generation). VidAngel told me that they wanted to add it, but Apple wouldn't allow it. Any suggestions on how to petition Apple to add it?

  Hi peredehuit

  The 3rd generation Apple TV doesn't have access to the App Store and so can't install 3rd party applications.

  Apps can only be added by Apple.

  You can leave Apple comments here.

• How to make an application on iOS to use OSx Keychain information?

  Using an iMac with El Capitan and an iPhone with iOS9:

  So here I am: I've set up an account on a website (www.eurostar.com) via my Mac with os x El Capitan using Keychain iCloud with its suggestions of strong passwords.

  Bought a train ticket from Paris to London.

  Downloaded the Eurostar App on my iPhone with iOS9 having the available train ticket on a trip.

  But when you use the Eurostar, Keychain does not provide me with the password for the connection.

  Is there a problem with the help of key-ring between the pages in Safari on a Mac and the connection on an iPhone APP?

  Or it only works in Safari on all platforms?

  So:

  "what I'm doing wrong?' or

  "How can I keychain to fill in a password in an application that is hidden somewhere in the login keychain items?"

  Someone at - it an idea?

  Keychain is reserved for the Safari Web sites.

• How to make an application backup over the clouds

  Had an app go bad. How to retrieve only that one sauvegardΘ cloud pro iPad?

  You do not restore the iCloud apps, can re-download you them just on the App Store.

  Open App Store > updates > search or purchased for the app and it displays a cloud if you have already purchased the app.

• How to make my application requires a reboot after installation?

  My apps are around a year now and I realize that they do not have to restart the computer after the installation or update. So I get some customers complain that it does not work so I advice to restart and it solved their problem.

  I don't find in the deployment descriptor. Can someone please help me find the way to do it? My apologies for my ignorance.

  The BlackBerry Smartphone should automatically prompt the user if a reboot is required.  Your application has no need to specify anything to achieve.  The following article explains why a reboot is required.  Your application falls into any of these categories?

  The reason why a reset is required when upgrading an application

  http://supportforums.BlackBerry.com/T5/testing-and-deployment/the-reason-a-reset-is-required-when-up...