How to make a copy of windows 7 for my laptop

Similar Questions

• How to make a copy of windows vista if I have a product key

  I wanted to find a copy of windows so I have to reinstall my windows laptop I have a Cliaa key for it

  How do I down load a copy. reason for this is that I can't get the drivers to work on it, they have only the version of drivers for my laptop that works for vista

  Hello

  There is no available free and legal Vista download

  and you get the vista drivers from the laptop manufacturer's Web site

  drivers and software - key in your model number download - section looking for the latest vista drivers

  How to reinstall vista

  Contact the manufacturer of the laptop computer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How to make a copy of windows xp home startup disk?

  I would like to know where I can get a boot drive for Windows XP home. I have a computer that is running XP and there the BSOD and I can not even boot mode safe. I would like to do a clean install, but I don't have a boot disk.

  Hi ShadB311,

  Provide us with the information below:

  · What is the number and the model of the computer?

  · The operating system was preinstalled on the computer?

  · What is the service pack installed?

  · What is the exact error message with the error code that you receive when you try to start?

  · Do you remember any recent changes made before the show?

  New installation or repair facility is the last resort that we follow to solve the problem.

  You can buy is no longer Windows XP CD that the life cycle is complete. You can check the link below: http://support.microsoft.com/lifecycle/?LN=en-gb&C2=1173

  However, you create the startup disk, see the link below: how to get the installation discs for Windows XP for installation of boot floppies: http://support.microsoft.com/kb/310994

  With regard to:

  Samhrutha G S - Microsoft technical support.

• How to make a copy of any request for friends I sent in Windows Live Messenger

  I need to know how I can get a list of who I sent ' friends want "for a certain period of time. Is this possible? I also need dates of these applications.  Thanks to all who can help out me.

  Hello

  Is a group of peers supported and unfortunately has no real influence answers
  Windows Live.

  Windows Live Messenger has its own Forums and Solutions.

  Windows Live Solution Center
  http://windowslivehelp.com/

  Windows Live Messenger - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=2

  Windows Messenger - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=2

  I hope this helps.

• How to make a copy of my favorites on my laptop and on my desktop?

  I now have a new Summit of the bureau, I want to export the bookmarks of
  my notebook to the new top of office.

  You can make the window bookmark from the toolbar of backup and import button. You can export bookmarks as .html to any desired directory.

• How to make a copy of Win7 for my Australian Satellite A500?

  How to make a copy of windows 7 to go on my Satellite A500 I need to reinstall?

  Hello

  If you are looking for your original A500 recovery image you can order the original recovery disk.
  Please visit https://backupmedia.toshiba.eu

• How to make a disk image of work for my windows 98se boot (original is long dead)

  How to make a disk image of work for my windows 98se boot (original is long dead).  I have a copy of Windows 98SE bought new off the years of the plateau.  I now have a 64-bit system, so I can't run it natively, but I discovered that I can't even run at all, because I don't have a working bootable floppy!  I thought that the CD is bootable, when I used it a long time ago, but now it does not start if I have used the disk? Anyway, can I get a driver Microsoft w/CD install/bootable disk, or do I have another decent resource?

  Thank you. You can contact me to the * address email is removed from the privacy *.

  http://www.bootdisk.com/bootdisk.htm

• How to save a copy of Windows XP that has been created by an image?

  I used 'Image for Linux' to create an image of a PC with Windows XP, SP3.  With that done, I can copy the image to a new PC and it works fine (assuming that I stay within the limits of the PC HAL).

  My problem is that I don't have to enter a new key of Windows XP when I installed the image on another PC. for example, I use a license of Windows XP on two PCs.  Since I want to be legitimate on my software license, I tried to activate Windows XP license to new PC - but the computer says that the license is already activated.  So it is logical that the new PC would react like that - I put the picture of an activated copy of Windows on a new PC, the new copy of Windows must also think that it is enabled.

  All this brings me to my original question: how to save a copy of Windows XP that has been created by an image?

  Hi RichardMatt,
   
  I recommend you contact the customer service of Microsoft for queries on activation for clarity.
   
  See the following article to do the same thing:

  How to activate Windows XP

• How to make a reformat online Windows XP?

  How to make a reformat online Windows XP?

  You cannot reformat the drive or the Partition of Windows XP while XP is running. To reformat the XP partition, you will need to insert the Windows XP installation CD and boot from the CD. One of the installation option is delete and reformat a partition.

  Warning: Reformatting will result in the loss of all your data files (Documents, Photos, music, etc.) and you also need to reinstall XP because it will be removed after reformatting.

  Is there a particular reason you want to do this?

  J W Stuart: http://www.pagestart.com

• I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  I have the genuine product key genuine microsoft windows vista business but I have lost the cd/dvd of the windows disk, how to manage another copy of windows vista professional?

  If you bought the retail of Windows 7:

  How to replace Microsoft software
  http://support.Microsoft.com/default.aspx/KB/326246

  If Windows is preinstalled with the computer:

  If you do not install disks:

  Contact the OEM computer manufacturer and ask them to send you an installation to your computer disk - they may charge a small fee. Contact information for the manufacturer of your computer can be found here:

  http://support.Microsoft.com/GP/oemphone/

• How to make a boot disk windows 7

  How to make a boot disk windows 7

  Hi bob 5555.

  See the following article on the start-up of the installation CD:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-from-a-Windows-7-installation-disc-or-USB-flash-drive

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to make a page on windows 7

  How to make a page on windows 7

  1. Press PRTSCN.

  2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

  3. In the painting, on the Home tab, in the Clipboard group, click on paste.

  4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

  5. Click on the paint button , and then click Save.

  It is also possible to capture the active window when you press PRTSCN.

  To capture an active window:

  1. Press Alt + PRTSCN.

  2. Open Paint by clicking the Start button, all programs, accessories, and then click Paint.

  3. In the painting, on the Home tab, in the Clipboard group, click on paste.

  4. If you want to resize the image, on the Home tab, in the Image Group, click on resize and enter a new size in percentage or in pixels.

  5. Click on the paint button , and then click Save.

  Notes

  • On some keyboards, PRTSCN might appear as PRTSC, print SCREEN, or a similar abbreviation.

  • Some laptops and other mobile devices that do not have a print screen button could use other combinations of keys, such as FN + Insert, to capture the screen. Check the manual that came with your laptop or device for specific instructions.

  You can also use another image editing program other then paint if you have installed.

• How to make a USB bootable windows 7 or windows xp or any other

  How to make a USB bootable windows 7 or windows xp or any other

  tajamulfayaz

  The link below is a tool that will use a Windows ISO file and make a USB bootable for you.

  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Win7_usbdvd_dwnTool

• need to make a copy of my OS for security reasons.

  I don't have an OS disk with my computer and I need to make a copy of my OS to keep on hand in case I have a sys. failure. How to make a copy of my Vista operating system?

  Depending on your version of Vista for backup of the computer:

  http://www.bleepingcomputer.com/tutorials/tutorial145.html

  Read the above.

  3rd party software:

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• How to make the updates of operating system for the limited user account?

  original title: how to make the updates of operating system for the limited user account?  Limited user account cannot access the Windows Update page, see instead cautioned against MS the most recent must be installed.

  XP Pro SP3 slipstreamed.  New a DBAN nuked HDD installation

  All the OS updates installed from Admin acct before creating the LUA

  AV installed AVAST

  all dot net uninstalled and then reinstalled to resolve a problem installing Quicken

  Updates to auto lit

  Active Windows Firewall

  Three solutions of workaround for Windows XP running as a limited user

  http://blogs.Computerworld.com/16502/three_workarounds_for_running_windows_xp_as_a_limited_user

  Survive a Windows XP Limited user account

  http://techknack.NET/surviving-a-Windows-XP-limited-user-account/

  See the response from Michael Kuntz - re: HAL files

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/thread/e8612ac4-b881-4FB3-85e7-32004932fb5f

  There is an available for installation of SP3 Cd

  Manually installing SP3 using the Microsoft Download Center or a CD

  If you have problems to receive the service pack from Windows Update, you can download SP3 as a standalone package from the Microsoft Download Center Web site, and then install SP3 manually. The installation package is intended for it professionals and developers, but you can always download and install this file.

  You can also order a CD from Microsoft containing SP3. For more information, go to the Microsoft site.

  To manually install SP3 using the standalone package installation or CD

  1. Do one of the following:

     • If you downloaded SP3 from the Web site, to install it immediately, click Open or run and follow the instructions on the screen. To install the program later, click on save and download the file to install it on your computer. When you are ready to install the service pack, double-click the file.

     • If you install SP3 from the Service Pack 3 CD, insert the disc into your computer with your current version of Windows XP running, and Software Update Installation Wizard should appear automatically. If this wizard does not appear, click Start, double-click my computer, click on your CD or DVD drive and then click AutoPlay.

  2. In Windows XP Service Pack 3 page, click Next.

  3. Follow the instructions that appear on your screen.

  4. Once the installation is complete, click Finish to restart your computer.

  5. If you disabled your antivirus software, turn it back on.