How to make duplication of text cut so it shows only a part of the underlying Word

Similar Questions

• I backed up my playlists M3U files before setting up a new computer, but even if music files are there, the playlists now show only a part of the music that was originally in the playlists. How can I get my playlists to work properly?

  Sorry in advance for the description potentially lengthy below.

  I have the latest version of iTunes on a Windows 10 computer with a processor i5, 8 GB of RAM and a lot of storage capacity.

  I recently updated my computer to the above specifications and installed a new SSD as my main and kept my old C drive as a new drive E drive.

  I backed up all my iTunes playlists as .m3u files export.

  Now that I have set up my computer and installed the latest version of iTunes (I think that I initially ran 9? Or?), my playlists import OK, but the majority of the songs that were in each playlist are not displayed, even if they are there when I see everything in 'My music', and they are in my iTunes folder.

  The selections are saved correctly I would say. When I opened the files as text files to check .m3u, good song lists are all in tact and the songs that do not appear in iTunes imported playlists are there in the .m3u.

  I tried to re - import playlists, as well as the copy of my music files to my different readers (including the same drive as the .m3u links to and those that they do not). Nothing seems to work. I spent years of compiling playlists are now empty or almost empty, and I can't find a reasonable solution to fix it.

  Must the .m3u files be .xml files? Is this a bug between versions of iTunes?

  Not sure if it's relevant, but my iPod Touch still has playlists on it. I hesitate to plug them in and try to sync because I don't want them crushed.

  Any help would be great, if you please.

  I really want to rebuild my entire library of playlists of text files.

  Thank you

  "Backup" individual playlists is not necessary and probably will not work in all cases.  All selections are stored in the iTunes (iTunes Library.itl) database and all approaches successful transfer, reproduce or modify your library depends on manipulation of this file correctly.

  If you haven't changed anything on the E: drive, you have nothing more that hold down the SHIFT key at startup of iTunes, then when you see this message:

  

  Select the iTunes (the file iTunes Library.itl ) on your E: drive database - if you use default iTunes, this will be in E:\Users\username\Music\iTunes.

• How to make columns of text with adobe muse

  Hi, how to make columns of text with adobe muse (like InDesign)?

  As Brad has already indicated, the columns are a difficulty.

  Set a text box to separate visually in separate (with a nice gutter) columns does not seem so difficult, but the problem lies in how to manage the flow of text in regards to positions, simple lines ugly upstairs and down a column, deliberate column breaks, how to connect to the text of subsequent block etc. The developers of W3C and browser have not yet agreed on this issue. (Look for the clear green statutes in the table: http://caniuse.com/#search=columns)

  As a matter of fact, Adobe has proposed and developed an alternative for wounds and flawed of current columns, at the W3C long meetings: 'Régions' (which could also leave the text to "wrap" around a box or even an irregular shape). But their effort was in vain. ' Technically too much, too soon, to be treated by the mobile browser engines ", was the comment of Google . So the W3C put this contribution on the shelf.

• How to make multiple "BOLD" text, for example the positions of the scene, or the names of the characters?

  How to make multiple "BOLD" text, for example the positions of the scene, or the names of the characters?

  You can do this by changing the model of the document.

  Open the document, go to Edition-> model. A dialog box will launch that will have some element types on the left and its properties on the right.

  Select Heading (or Character name) stage left. On the right, go to the 'Text' tab and click on the "BOLD" checkbox.

  Press OK.

  I hope this helps.

  See you soon,.

  Sunny

• How to install my final studio cut in my iMac 4 k Vince? The 4K Vince iMac doesn't have an optical drive

  How to install my final studio cut in my iMac 4 k Vince? The 4K Vince iMac doesn't have an optical drive.

  You need to buy or borrow and external optical drive.

  Apple sells a:

  http://www.Apple.com/shop/product/MD564LL/A/Apple-USB-SuperDrive?FNODE=5F

  There are others also available-

  http://eShop.MacSales.com/item/OWC/MRSSDSDT8X/

  BUT do not forget that the FCS has been abandoned by Apple years ago, and the latest Apple operating systems are built without any concern as to the functionality of the FCS.

  Some of the apps in FCS are dead in the water, and others work with features limited or erratic.

  Anecdotal reports of problems running FCS on model are all over the map. Some do work, some don't.

  In addition, FCS2 has problems with the included Installer, requiring Rosetta to run (which is no longer included in the operating system), so it will not install without workaround.

  MtD

• How the police or the smaller pagesize. Right now, it shows only about 1/2 the page om a screen

  How can I make smaller screensize. Right now, it shows only about 1/2 page

  You can zoom the smaller pages until find you what's happening with your system.

  View > Zoom > Zoom out

  or Ctrl +-(c'est un signe négatif ou un trait d'Union)

• My screen shows only 1/4 of the image. I can scroll to get up and down. How can I fix?

  My screen shows only 1/4 of the image.  I can scroll to get up and down.  How can I fix?

  Hello

  1. You did changes to the computer before the show?
  2. The problem occurs with a particular application or any application?
  3. If this happens with a particular application, then what is the name of the application?
  Method 1:
  Check if the Magnifier is enabled on your computer. Check out the link and follow the steps to change the size of the screen. Check whether the problem is resolved.
  
  Turn on and adjust the Magnifier
  http://Windows.Microsoft.com/en-us/Windows-XP/help/turn-on-Magnifier
  Method 2:
  This problem may also cause if a computer monitor or the screen resolution is changed. Check out the link and follow the steps to change the resolution. Check if the problem persists.
  To change the screen resolution, see the link:
  Change your screen resolution
  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution
  To change the monitor resolution, see the link:
  Change the resolution of your monitor
  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/change-monitor-resolution

• on this forum, how can I access previous issues published.  This shows only recent messages?

  on this forum, how do you get published earlier issues?  This shows only recent messages from a few minutes to Twitter.com.  I had posted a question yesterday and can't find it to view responses by others.

  Top right, go to more in the flow of connection.

• Is there a way to make only a part of the timeline?

  Wel the title says it all I guess: is there a way to make only a part of the timeline?

  Yes. Place a marker and use keyboard shortcuts 'B' to set the inpoint and 'n' to define the out-point on your timeline. Good luck

• How to make a transparent text so as to keep the whiteness

  This can be very simple, but have failed to do it again. Have tried all the effect different merger on the text layer, but so that it makes the text more transparent it becomes too dark, how to avoid this? And while Im at it, it is the final effect of I'm looking for with the whole project.

  If anyone knows which fonts and effects used would be great.

  

  Well, that's the whole issue of blend modes - they mix the two values in pixels. The only way to change the behavior would be to also change the bottom layer. In your case, several copies of the text tinted different colors and where the modes in different opacities of merger should do the trick. Sometimes there is no one-click solution to achieve a specific look.

  Mylenium

• How to make a specific text in Illustrator CS6 Italicize?

  I have problems of specific groups of text italic. I'm working on illustrations for a CD project. I have text lines include the authors of the song, I want to italicize, but I would like to than the other text to stay "regular". Older versions of Illustrator do that, but I have a problem. It is more a feature of the application? How can I do this?

  winklepleck wrote:

  I do CD illustrations for a company that uses Adobe Illustrator templates

  which have been converted into PDF files. When you open this file in

  Illustrator, there are three layers, one for work and two for the

  registration marks and instructions that are disabled on the side. I just

  could not select the text on the layer of the work, or any layer for this

  I don't care.

  It's just what happens in a PDF file. When text tracking or kerning is changed from the default font, then it gets cut into pieces.

  And once again: Illustrator is not a general purpose PDF Editor.

  http://prepression.blogspot.de/2014/09/the-ten-commandments-of-PDF.html

  With regard to the files I and PDF to Illustrator, please watch this video:

  This mysterious does Illustrator - saving files on Vimeo

  In order to solve your problem: you need to paste the text together again.

  Either by copying all the objects (all) text in the Clipboard, then create a text box and paste.

  Or with scripts.

• How to make a custom text in eSign field?

  I'm doing my custom field in this format: 1234-56-7. I can't figure out how to make this happen by using a custom expression. Any advice or tips? I use a text field with custom regular expression.

  Thank you!

  Hello Lisaw31172184,

  I recommend adding three separate text fields and provide the Maximum character limit in each of them. Here is the reference for help:

  https://helpx.Adobe.com/document-cloud/KB/EchoSign-credit-card-fields.html

  Let me know if you need more information.

  -Usman

• How to make Toshiba USB 250 GB HARD drive read-only?

  Hello

  I just plug a Toshiba USB 250g external hard drive to replace all the sticks of memory, I've been using.

  I'll use this external hard drive to copy files to other computers and I would like to know how to make the drive read-only.

  Moreover, all the other tips to protect the disc would be extremely welcome.

  I use a Dell with Windows 7 laptop.

  Thank you very much

  Dougal

  I don't know what HARD drive you have exactly, but I know that Toshiba offers a software protection with external hard drives.
  Did you check manuals? Is something like that provided with your HARD drive?

  Maybe you need to use some third party software part for the protection of files on the HARD drive. Google all over the place.

• How to make a background blur realistic looking to show that behind a dialog box?

  I'm prototyping a Flex in Fireworks CS4 application & have some pop up dialog boxes to display.  When they show the background should be blurred.  I know how to make them appear, but I can't get a nice blur effect that looks like the one you see in Flash.  I tried a transparent layer with different blur filters, but no aspect than realistic.  The information?

  Just go to the filters section in the property inspector Panel, first select your object on the Web (for example, the bottom), then click on the [+] sign sign in Filters > a small menu opens, select blur > Gaussian blur and change the value (0 = zero blur, 4 or more = a lot of blur). Later, you can change or remove the effect, which is good.

  I often use a Gaussian blur, especilly if I need make a blurry image...

  I hope this will help you!

• I want to know how to crop a letter in a clipping mask, so that certain parts of the letter are cut out of the bounding box

  letter in the bounding box of culture?

  I have a box of 15 x 15 cm. I have my only inside typed letter.
  I want to clip the letter to the limits of the box so that if I change its scale, part of the letter is cropped to where are the limits of the area.

  I must do this for an assignment.

  Thank you!

  And the R is black or another color?

  The letter must be below the box. Use the layers panel to make sure the letter is below the box. Select both, menu items, clipping, Make.

  If this does not work for you, please post a screenshot showing the Panel layers with extended layers of screen.