How to make the second row in different color

Similar Questions

• How to describe the text in a different color?

  How to describe the text in a different color?

  No need to simplify the layer - which causes the text that becomes uneditable as text.

  With the layer selected text, use the layer... Layer style... Style settings to open the settings of a dialog box for the text layer where you can select "Stroke" and choose your options for size, color, etc.

  Ken

• How to take the second row under the first line

  Dear Sir

  take my table like that name stock and times

  STOCK	Header 2	Header 3
  A203	01:30	02:00
  A203	02:40	03:00
  A203	03:02	04:00
  A203	05:00	06:00

  the cry of output be like below

  STOCK	1	2	3
  A203	00:40	00:02	01:00

  1 column is

  02:40 - 02:00

  column 2 is

  03:02-03:00

  column 3 is

  05:00 - 04:00

  Kind regards

  Hello

  You can use the analytical function of LEAD (or GAL) to get the difference between hours.

  For the results in the form of 3 columns in 1 line (rather than 1 column on 3 rows) calculates the LEAD in a subquery.  In the same auxiliary request, you can use the function ROW_NUMBER analytic number lines 1, 2 and 3.  The main query then use this value to rotate out of the subquery.

  Depending on your data, your needs and your version of Oracle, it will be something like this:

  WITH got_analytics AS

  (

  SELECT stock

  LEAD (header_2) (PARTITION OF BOUILLON

  ORDER BY header_2

  ) - header_3 AS time_diff

  ROW_NUMBER () (PARTITION OF BROTH

  ORDER BY header_2

  ) AS r_num

  FROM my_table

  )

  SELECT *.

  OF got_analytics

  PIVOT (MIN (time_diff)

  FOR r_num (1, 2, 3)

  )

  ;

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) and also publish outcomes from these data.

  Explain, using specific examples, how you get these results from these data.

  Make sure that your sample data reflect important aspects of your actual data.  For example, in your actual data, you have probably different values in the column actions. Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• How to make the difference between data (different sensors and actuators) is tans/recvd using series com

  Hello

  I get 2 different types of data from the controller. How to differentiate b/w them.

  After receiving my code in deccissions. There are 6 different control elements in my project attached to the controller. Thanks for give me idea how I send data to the controller for this controller to differentiate that exit to be active or low

  First, look at the couple of serial examples that come with LabVIEW. You use the VISA functions to read and write. Your technique to separate the values will work as well in LabVIEW. You would be to convert the string returned by VISA reading to a digital (i.e. with the Scan of the chain). Then do the comparison, then the result of wire to one of the two indicators. Put the terminal of each indicator inside a case statement would be a way to do it.

• How to select the second row in three?

  I use answers and are in a situation where some IDs have three related lines.

  I'm trying to flatten it so that each of these lines is displayed as a column.

  So instead of:

  ID fruits

  1 Apple

  2 Orange

  Peach 2

  2 plum

  Mango 3

  I want to see

  1 Apple

  2 plum fishing orange

  Mango 3

  I can get to the first (orange) and the last (plum) with MIN and MAX.

  For example (fruit) MIN or MAX (fruit)

  Answers how select the line in the middle (fishing)?

  Thank you!

  Use LISTAGG, but then to analyze the first second and third in their own columns using regular expressions... or change the data structure to match the use of the information (use is the master, not the slave)

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• Does anyone know how to make the site in different languages?

  Does anyone know how to make the web in different languages? and how to make the menu appear on the master page in the target language?

  Hello

  You must create the page content in languages that you want and then bind using the options in the subfolder on root of the hosting platform.

  More details:

  http://forums.Adobe.com/message/6065652#6065652#6065652

  For the menu, you need to create different masters, and then apply on the pages.

  Thank you

  Sanjit

• When I type text, the text is in a box, and I can't figure out how to make the box go away. I never had this problem before.

  When I type the text in the latest Illustrator, the text is in a white box. I never had this problem before. I can't find out how to make the box go away. What I am doing wrong?

  Today I tried to close Illustrator and re-boot the computer. It did not help. I went on a second computer video/graphics/animation and open Illustrator here. I did a few tests, and he managed to create the text without a box. Then, I opened my first computer Illustrator file form. The boxes were there. I tried to type the new text, and the box was there. When I open the file it says something about a missing font and a replacement. I tried to use this area to locate the police but couldn't. It's the default font on Illustrator on the other computer. A variant of Myriad. I tried to type in the text with a different font. No box. The default font selected by the Illustrator has apparently a box. I didn't try to change the font because it was going well, and because I didn't know any font came with a box. At first, I did all of the text, which was on a white background, so I don't see the boxes of cream. When I added the background image of the boxes appeared. If the problem is resolved. It was a font with a box.

• How to make the window disappears after minimize instead of becoming the output of the image?

  How to make the window disappears after minimize instead of becoming the output of the image?

  Hi Sam,

  This issue may have caused due to infection by the virus or system files missing or damaged or because of the corruption of the user profiles. I would like to know some information about this problem so that we can help you further.

  1. have you made changes on the computer before this problem?

  2. do you get any error code or error message while starting?

  3. have you checked if the problem occurs on a different user account?

  I would suggest trying the following methods and check if it works for you.

  Method 1:

  Run the Microsoft Safety Scanner and check if there is any threat of viruses found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. During these 10 days, it will remove all the files infected by the virus and records. I suggest you create a backup of your data, and then install Microsoft Safety Scanner.

  Method 2:

  Run the System File Checker scan and check if it helps. This will help you to find and replace missing or damaged system files.

  See the following article from Microsoft Support to run the System File Checker.

  http://support.Microsoft.com/kb/929833/en-us

  Method 3:

  If you have not checked if the problem occurs on a different user account are not, then try again to create a new user account and check if the problem persists. This is to check if the problem is caused due to the corruption of user profiles or not.

  See the following article from Microsoft Help to create a new user account.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If the problem does not persist in the new user account, then try the steps in the following article from Microsoft Help to fix the damaged user profile.

  http://Windows.Microsoft.com/en-us/Windows/fix-corrupted-user-profile#1TC=Windows-7

  Please reply with the status of the issue so that we can better help you.

• How to make the color of the sky, exactly the same thing in multiple images?

  How to make the color of the sky, exactly the same thing in multiple images?

  Bengt Nyman wrote:

  I'm not trying to replace the sky. I want to talk to a group of photos BIF where the percentages of red, green and blue in the sky varies from a few percent, but enough to disrupt continuity within the group. I like t would be able to use the percentages of color to one of the pictures and replicated in others.

  Because the brightness of the sky probably varies from image to image using percentages RGB will not work. What you can use are the values of a and b the laboratory values . Right-click in the inside of the develop module histogram and tick 'Show Lab Color values.' You can ignore the value of L, which is the value of Luminance or brightness. Adjust the blue sky s a b valueusing the Temp WB and sliders dyed until they are the same as your first reference image file. The value determines the color red/green balance if you use the Tint slider to correct the value. The b value determines the color yellow/blue balance if you use the slider Temp to correct its value.

  Remember that setting the base Panel WB with 'fixed' values of b for photos taken under lighting conditions different sky will be the color of the other objects in the image look incorrect (birds, trees, buildings, etc.). In this case, you will need to use the brush setting to paint in the region of the sky and then use its temperature sliders and tinted to change just the color of the sky.

  To be honest I don't know why you feel it's necessary. Maybe you can post two screenshots: 1) with the sky that they way you want to and 2) an image that you want to resolve to match.

  

• How to make the shape of 10g in 11i applications?

  Hi all
  
  I'm working on oracle r12 and I developed a shaped form 10g. This form works very well in R12. But he does not get compiled in 11i applications.
  Displays error
  
  ROS ERROR:-200
  Segmentation fault (coredump)
  
  Please suggest how to make the form work on 11i?
  Template.FMB and the PLL is different in 11i and R12?
  
  I don't have access to any apps 11i environment. Where can I get these?
  
  
  Thank you
  Veena

  I'm working on oracle r12 and I developed a shaped form 10g. This form works very well in R12. But he does not get compiled in 11i applications.
  Displays error

  ROS ERROR:-200
  Segmentation fault (coredump)

  Please suggest how to make the form work on 11i?

  You cannot run Oracle Forms/Reports 10 g with EBS 11i since it is not certified.

  For R12, use Developer 10 g

  For 11i, you need to use Developer 6i

  Template.FMB and the PLL is different in 11i and R12?

  Yes.

  I don't have access to any apps 11i environment. Where can I get these?

  You mentioned above that Forms 10 g does not work with 11i applications so I assume you have access to an instance of 11i. If you want to continue to have access to the 11i environment, please log an SR and ask the support of Oracle to send the Media Pack, so you can install it.

  Thank you
  Hussein

• * URGENT * how to turn the table rows programmatically?

  Hi Experts ADF,
  
  I am a developer of the ADF, but not an expert. Here is my requirement, please help me to achieve the same. It is very urgent and would be a great help.
  
  In our ADF Faces application, we have a SEARCH page where we assume to design a table with 3 rows and 2 columns. While the search page is loading only the first line must be activated and the other below 2 rows should be disabled (can be visible, but gradout). In the first column of each row is a box of choice (which will be rated Firstname, lastname, Department,... UserID) and the next column is a free text box (input field).
  
  Ex: In the first row when we select Firstname and enter the value in the free text box, then the second row should be activated when we tab out of the text box line. If the top textbox is empty then the second row should not be enabled. When I get the value in the text field of the line of the 2nd and the 3rd row must be enabled. Max 3 lines. All 3 rows may be visible on the page, but the last 2 rows should be gradout.
  
  How to do the same, please help me with a little explanation. Do I have to use the ADF PPR to do the same, if so, how do the same? Thanks in advance.
  
  Thank you
  klogube

  Sorry, it took a little time :-(

  I implemented a small example, if you get the picture...

  Page code:

  Bean code:

  public class IPTBean
  {
      String mS1;
      String mS2;
  
      public IPTBean()
      {
          super();
      }
  
      public void setS1(String aS1)
      {
          this.mS1 = aS1;
      }
  
      public String getS1()
      {
          return mS1;
      }
  
      public void setS2(String aS2)
      {
          this.mS2 = aS2;
      }
  
      public String getS2()
      {
          return mS2;
      }
  }
  

  I put the bean in the flowrate range of page (but you can use any variable you like i.e. links)

  When you run the page, you see a tabled text input and a button. Type something in the files and hit return or the tab out of the field and you see the next filed.

  Now you can use this technique to hide and show your user interface.

  Timo

• Can you please tell me how to make the thicker arrows on the Pages.

  Can you please tell me how to make the thicker arrows on the Pages. Thank you very much. There is something incredibly simple to do, but I, having a disconcerting brain, am totally unable to understand. Please please help me. Thank you

  < re-titled by host >

  Try here > Pages for Mac: Add and edit forms

• How to make the top sites page appears when I open a new tab? Why have I not of "buttons" to pin a top site of the page tab?

  When I open a new tab, NO best sites don't show up... shows just a search engine box. I have Firefox 33.0. Why is there no 'pin' button when I opened a new page? How to make the top sites page appears when I open a new tab?

  Here is some additional information on the configuration of the new tab page:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste newtab and make a pause so that the list is filtered

  (3) double-click the preference browser.newtab.url and enter your favorite page:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Press Ctrl + t to open a new tab and check that it worked. Fixed?

  Some traps:

  If Firefox will not let you change this setting: you can have what is called SearchProtect on your system.

  Firefox if allows you to save your changes, but he doesn't know: one of your extensions may be the substitution of her. You can consult, disable and/or remove extensions on the addons page:

  "3-bar" menu button (or tools) > Add-ons > in the left column click on Extensions

  If the modification works during your session, but during the next startup is leads to: you could have a user.js file in your personal settings Firefox (your Firefox profile folder). This article describes how to track down and delete the file: How to fix preferences that will not save.

  A little luck?

• I have associated my pencil to Apple for the iPad Pro; How to make the Widget of batteries displayed on the notification Center 'today '?

  I have associated my pencil to Apple for the iPad Pro; But how to make the Widget of batteries displayed on the notification Center 'today '?

  See if it works. Scroll to the bottom of the list in the display today. Tap on edit. Press on the + sign next to battery.