How to measure complexity availability operation & Maintenance costs etc.

Similar Questions

• How to measure my each operating time blocks

  Hi, guys

  I will measure my each main blocks, duration, are totally five large blocks in my final VI, the last four of them were in a while loop

  Thank you

  What exactly do you mean by "block"?  Is this a Subvi, primitive LabVIEW, a piece of LabVIEW code?

  You can use several functions of number of cycles.  If you put your code in a flat sequence structure with Tick account in settings in the meantime, you can subtract the values from each other and to relative time of each piece of code.

  Why are you worried about the execution time?  Problems of particular clock?  Most of the LabVIEW primitives will run so fast, you'll probably see no or very little change in the number of cycles before and after them.

  Here is an example to show how measuring the execution time for a section of code.

• How to measure latency and availability for windows in IPM workstation

  Can someone tell me how to measure the latency & availability for workstation windows in IPM.

  You can measure the latency. Just add the Windows host as an Ad Hoc under the IPM objective > Collection Management > devices. Then create your collector with desired source, this ad hoc goal and your operation Echo IP device. The reports will tell you when operations timed out, and what the latency was for the duration of the collector.

• How to measure the performance of the sql query?

  Hi Experts,
  
  How to measure the cost of performance, efficiency and CPU of an sql query?
  
  What are all the measures available to a sql query?
  
  How to identify the optimal query writing?
  
  I use Oracle 9i...
  
  It'll be useful for me to write the effective query...
  
  Thanks and greetings

  PSRAM wrote:
  Could you tell me how to activate the PLUSTRACE role?

  First put on when you do a search on PLUSTRACE: http://forums.oracle.com/forums/search.jspa?threadID=&q=plustrace&objID=f75&dateRange=all&numResults=15&rankBy=10001

  Kind regards
  Rob.

• Satellite 1800-814: how to measure the temperature of the processor?

  I replaced the radiator component on my laptop as it freezes suddenly during the operation. Now everything seems to be better, but still a last question. How to measure the temperature of the processor?

  Dominic displays only HDD temp and MBM profile for 1800-224 display cases and the cpu. But if I can use this profile? Any other ideas how to meausre CPU temp?

  MBM shows me around 40 to 49 ° C for the cpu. Is this normal or too high just to run windows?

  Thanks in advance

  Greetings
  Jens Grieger

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5564&messageID=19417

  Maybe the help!

• How to measure how much "commit implicit group" took place?

  Hi all.
  
  The BP is 11.2.0.3 on a linux machine.
  
  As far as I know, when multiple sessions lance "commit" at the same TIME, oracle is committed "IMPLICIT group."
  instead of making each commit unique.
  
  = > the ' commitments of the user "for each request validation.
  
  How can I measure how much "commit implicit group" occurred?
  Is not "lot of explicit validation.
  

  10:06:03 SYS@HOHO>select name from v$statname where name like '%commit%';
  
  NAME
  --------------------------------------------------------------------------------------------------------------------------------
  user commits
  commit cleanout failures: write disabled
  commit cleanout failures: block lost
  commit cleanout failures: cannot pin
  commit cleanout failures: hot backup in progress
  commit cleanout failures: buffer being written
  commit cleanout failures: callback failure
  commit cleanouts
  commit cleanouts successfully completed
  commit txn count during cleanout
  commit batch/immediate requested
  commit batch requested
  commit immediate requested
  commit batch/immediate performed
  commit batch performed
  commit immediate performed
  commit wait/nowait requested
  commit nowait requested
  commit wait requested
  commit wait/nowait performed
  commit nowait performed
  commit wait performed
  IMU commits
  cell commit cache queries
  cell transactions found in commit cache
  cell blocks helped by commit cache
  OTC commit optimization attempts
  OTC commit optimization hits
  OTC commit optimization failure - setup

  Thanks in advance.
  Best regards.

  869578 wrote:

  How can I measure how much "commit implicit group" occurred?

  You can not - there is no way to derive an accurate measure of available information.
  However, a session which issued a commit (or rollback) go into a wait for "log file sync", and publishes the journal writer "again written ' to copy the log to disk buffer. so as you ignore the errors introduced by the second 3 timeout, or 1 MB, or relaxation space of 1/3 and then the number of expectations on "log file sync" less the value of the statistic of the system "do it again" written should give you a reasonable approximation of the desired result.

  Judging by your last two questions, it seems that you could do to get a copy of the core Oracle - the things you ask is pretty well coveredin manuals, but Oracle base is trying to present the mechanisms in a narrative form more that some people find it easier to assimilate.

  Concerning
  Jonathan Lewis

  Published by: Jonathan Lewis on 11 March 2013 02:35

• How to remove "Skype available" from the top of the notification page?

  How to remove "Skype available" from the top of the notification page - useless promotion!

  Hello!
  
  Disable the Skype status under Notification settings in Skype.
  
  All best
  Siim

• How much space is left on the 128 GB on an iPadPro once I set it up basically? I can't find the info on the USA site.  The Dutch site 128 GB is advertised as being available for photo music etc. with A) a warning B) in small print: 'r '.

  How much space is left on the 128 GB on an iPadPro once I set it up basically?

  I can't find the info on the USA site.

  The Dutch site 128 GB is advertised as being available for photo music etc.

  (A) a disclaimer clause

  (B) in small print:

  "the actual formatted capacity is lower.

  How much more low (base configuration)

  THX, Klaas

  After the formatting and the Apple apps installed, a 128 Pro iPad ends up with 114 GBs of usable space.

• How to measure how long a Boolean value is high with thick County?

  I acquire the impulse response of a parallax Distance sensor, but I I don't know how to measure the number of features that this signal is high (the time of the input signal is high is proportional to the distance). I would like to reset the counter thickness when this signal is low. is this possible? Y at - it another option?

  Thank you...

  for (imstuck) wrote:

  You will need to adjust some if you want an indicator of up-to-date at all times.

  Here is a very minimalist version which updates the timer continuously while the switch is on and holds last value when the switch is off. Try it!

  

• How to measure the frequency of a clock using meter in LabVIEW?

  Hi guys,.

  Someone knows how to measure the frequency of a signal introduced in LabVIEW (in the FPGA PXI-7813R), using a counter in LabVIEW?

  Essentially, I want to use this counter as a kind of Logic Analyzer.

  Thank you, Anoop

  I don't know what you mean by "manual".  It is all managed in a housing structure.

  

• How to measure high voltage (60-70 v) and current (75-80 a) using a DAQ PCI or USB DAQ

  Hello

  I work with a system that works on about 5kW. The output of the system voltage can go maximum up to 60-70 v and thus the corresponding current around 75-80 a. I have 10 these systems that I want to read one by one continuously for long periods.

  I am designing the automated system best suited for this and looking for the best material that would be appropriate for this purpose. Looking for options, I found that an SCC - A10 attenuator may be used to get the tension down by a factor of 10. But I'm confused, if the high current will pose a problem and also how to measure this high current.

  I need to measure the voltage and current at the same time. Please suggest what would be the most appropriate fitting for the same (preferably PCI or USB)

  The hope of a quick response. Thanks and greetings

  Reena Sharma

  Facilitated learning

  Reena says:

  Hi all

  There is good news that the idea of using a compact data acquisition has been accepted by the authorities of the society. I'll be very grateful, if you could suggest me with some hardware modules suitable for my application and how I can use them best.

  Thank you very much

  Reena

  I was able to make a few suggestions, but do not have the time to understand your needs and the forums are not the best solution.

  Your Local OR representitive actully gets paid to do this kind of thing.  a google search suggests THAT LME is in Pasadena. Zack Collins would be the contact rep

• How can I reinstall the operating system on the 4200 travel companion

  I received just an old Travel Mate 4200 and you want to clean.  How can I reinstall the operating system?

  There are a number of documents in our GTK this a reload of your Acer computer

• How can I move my operating system to a new hard drive or other solutions, must be the Media Center

  My computer a gateway 815GM Media center PC has become black and start with some gray characters and words back up your data and replace the hard drive is bad. (or similar) My question is how can I move the operating system Windows XP Media Center Edition 2005 to a new hard drive.  Since the problem is the hard drive and all the computer a new operating system should not be purchased.  If there is no way to move it is it possible Microsoft send a replacement free of charge, or at least OS with only shipping.  My computer came with it pre-installed, and I have not received the drive with the OS on it.  What can I do?  Thank you for your information.

  When you received your entry door, it came with a CD or operating system recovery disc. If you no longer have that (or has not made a recovery disc set a utility included), contact Gateway to buy a set of recovery disks. It is normally fairly cheap. Then install the new hard drive and booting with the recovery disk to restore your computer to the factory State. MS - MVP - Elephant Boy computers - don't panic!

• How to stop the abandoned operation messages for the opening of the games on Facebook?

  Original title: how to stop the abandoned operation messages

  When I connect to my facebook and began to open the game or any game I get this error operation failed and it want start the game... I can open facebook and update the games, but it won't play...

  Hi Annspikes,

  1. what browser do you use?

  2. This only happens with Facebook game?

  3. you remember to make changes to the computer before this problem?

  If you use Internet Explorer, you can read the following article and check.

  Why do I get an "Operation aborted" error message when I visit a Web page in Internet Explorer?

  Hope this information is useful.

• How can I move my operating system to a new disk?

  Can you tell me how I can move my operating system and all the data to my new 1 TB of my little, 160 gig SATA drive SATA drive.  Is it a question of copy / paste?  I am running XP.

  I know that I can do the clean install and change the boot etc drive, but this means that I have to reinstall all my drivers, network and all that jaz.

  Just reading.  Is there a XP system image backup center?

  The new hard drive manufacturer normally provides software to do what you want to do cloning.

  Ask them about it.

  http://www.Acronis.com.au/homecomputing/products/TrueImage/

  Or read the above info: 3rd group of programs.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner