How to measure the performance of the disks in vcenter

Similar Questions

• How to measure the performance of the sql query?

  Hi Experts,
  
  How to measure the cost of performance, efficiency and CPU of an sql query?
  
  What are all the measures available to a sql query?
  
  How to identify the optimal query writing?
  
  I use Oracle 9i...
  
  It'll be useful for me to write the effective query...
  
  Thanks and greetings

  PSRAM wrote:
  Could you tell me how to activate the PLUSTRACE role?

  First put on when you do a search on PLUSTRACE: http://forums.oracle.com/forums/search.jspa?threadID=&q=plustrace&objID=f75&dateRange=all&numResults=15&rankBy=10001

  Kind regards
  Rob.

• Satellite 1800-814: how to measure the temperature of the processor?

  I replaced the radiator component on my laptop as it freezes suddenly during the operation. Now everything seems to be better, but still a last question. How to measure the temperature of the processor?

  Dominic displays only HDD temp and MBM profile for 1800-224 display cases and the cpu. But if I can use this profile? Any other ideas how to meausre CPU temp?

  MBM shows me around 40 to 49 ° C for the cpu. Is this normal or too high just to run windows?

  Thanks in advance

  Greetings
  Jens Grieger

  Hello

  See this http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=5564&messageID=19417

  Maybe the help!

• How to measure the frequency of a clock using meter in LabVIEW?

  Hi guys,.

  Someone knows how to measure the frequency of a signal introduced in LabVIEW (in the FPGA PXI-7813R), using a counter in LabVIEW?

  Essentially, I want to use this counter as a kind of Logic Analyzer.

  Thank you, Anoop

  I don't know what you mean by "manual".  It is all managed in a housing structure.

  

• How to estimate the disk space?

  Oracle 10.2.0.4.
  In order to build the new database on Solaris server, I need estimating disk space so that I can ask disk space. How to estimate it? Based on the current transaction? How to find the transaction under current database?
  
  Help, please.
  
  Thank you
  
  S.

  ski123 wrote:
  Oracle 10.2.0.4.
  In order to build the new database on Solaris server, I need estimating disk space so that I can ask disk space. How to estimate it? Based on the current transaction? How to find the transaction under current database?

  Help, please.

  Thank you

  S.

  First of all, you must know the structure of your tables. Using the table definition, you can quite easily calclulate the average row size. Then multiply by the expected number of rows. Do this for all tables. Factor in the fact that the space allocated by degrees. So, if you have a measurement of 10 MB size, the first line you insert will cause 10 MB drive to eat, but then the "n" next lines will cause no additional disk consumption (up until the 10 MB is consumed) because there is already a 10 MB preallocated in the scope. Factor in the use of the pct adversely affect use of the measure. Factor to a value of loot to take account the fact that everything is a riddle. Some people recommend a haul of 100%.

  And all this is just for the data files for the tables. Go through the same exercise for the index. Add the backupsets and archivelog files.

  Published by: EdStevens on October 27, 2010 17:11

• How to remove the disk HARD passwordon Portege R500?

  Hello

  do you know how to remove the HARD drive password? I know the current password, but if I try to remove it by changing your current password to a blank password, it does not work.
  It has password always news.

  Thank you

  Hello

  I hope that you use the correct and just HARD drive password because it of necessary to remove and delete the existing HARD disk password.
  If you have forgot the password for HARD drive then the HARD drive should be locked and you would not be able to unlock the HARD drive!

  Generally, the HARD drive password can be deleted in the BIOS.
  Please ensure that another password would be removed too.

  I found a forum thread useful on a password disk HARD similar question:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=66386𐍒

  According to the information published by the user jonr17 you must first make sure that all other like BIOS passwords, user and supervisor passwords are removed.
  Then try to remove the HDD from the BIOS password.

  Good bye

• How to recover the disk inside the computer

  disk is detached in the optical, missing drive in computer science, Lac still works, how to remove the disc

  Pavilion g6-1c58dx

  Hello

  OK, let me know if you have the drive recovery problems.

  Kind regards

  DP - K

• How to format the disk with Windows Vista to install Windows XP

  Hi, I would like to format my laptop and put Windows XP, but when I tried to start using the XP cd does not recognize the HARD drive, the type of my HARD disk is SATA
  I think that I need to download specific drivers, but I found no drivers on the toshiba Web page
  Thank you

  Hi Bertoni

  Sorry, but I must be honest now: I am ready to help, but I hate it when someone write about problems, but not write a which model of laptop. How to check the download page and you give any information when nobody knows what model of laptop you have?

  Let us know what model of laptop you have and we can continue the discussion. Otherwise visit category where your laptop and I am 100% sure that you will find the right answer it?

• How to measure the execution time of a specific to a VI process?

  Hello! My VI has two processes: compression and edge detection image and I'm trying to measure the execution time for the process of detection of edge of my VI, but I don't know how to do. Please give me some ideas on how to do it. Thank you!

  There are several ways that you can do.

  -L' one is using the number of cycles before and after your vi to get time like here: http://digital.ni.com/public.nsf/allkb/6F6B9F4E149C80578625652800784764

  - or use the profiling: https://zone.ni.com/reference/en-XX/help/371361H-01/lvhowto/profiling_vis/

  Edit: If you're open to suggestions:

  -You have not to load the image inside the loop instead, make him outside of the loop.

  - And I see of many IMAQ buffers are not removed properly. You can have everything at once by Images (No) by logging in to Boolean TRUE: http://zone.ni.com/reference/en-XX/help/370281P-01/imaqvision/imaq_dispose/

• How to measure the frequency of sampling (s/s) in LabView FPGA?

  Hello

  I am trying to find a way to measure the sampling frequency (s/s) during which I read from analog input in LabVIEW FPGA. I know that the sampling frequency is specified in the data sheet of the module HAVE, but I want to measure in LabVIEW.

  Any suggestions?

  A screenshot of the example code would be greatly appreciated

  Hey phg,.

  If you have some time loopand in this loop, you export a sample by iteration of loop via an I/O node. You can't out two samples on the same I/O node within an iteration, it's always one!

  So if your loop takes 1 second to run you have a sampling rate of 1 Hz output. The same goes for sampling of entry. How long your loop takes to run can be calculated as explained above.

  Samplerate [s / s] = 1 / [s] while loop

• How to measure the time elapsed between two steps?

  Hello

  In my script, I ask the subsequences. How can I measure the time it takes each subsequence?

  Something like:

  Statement: StationGlobals.TimeElapsed = 0

  -> SOMETHING HERE TO START A COUNTER<>

  call sous-suite

  Popup: Str (TimeElapsed)

  Thanks for help

  StationGlobals.Time = Seconds()

  ... / / stuff in time

  StationGlobals.Time = Seconds() - StationGlobals.Time

  You can also view the sample report of basic step in 2012 TestStand time (you can now download an eval).

• How to measure the width of pulse with MyRIO

  Hello

  Sorry in advance if this is not the most appropriate forum.  I'm not entirely sure if it's a more general problem of 'software' or the MyRIO-specific.  I have searched the forums and found a few related topics but could find no one who help me in this context.

  I'm trying to measure the width of a sensor pulse ultrasonic ping.  It emits a signal conditioning - the time that it is high directly corelates how far is the object.  Being new to LabVIEW I am confused as to how do I calculate the time it remains high.

  I read that LabVIEW should not need to 'variables' as in python or C, for what is the best way to measure time, the signal is high?  Normally, I'd go (new_time - old_time), but obviously I can't store an old time in LabVIEW as I would in python or C.

  Other notes:

  I have the sensor correctly ping echoing and I can see the blips on a chart and see a perfectly square wave valid.

  

  To answer your question on how you would in LabVIEW...

  While LabVIEW has not stated/named variables that you have in a language based on text, the data is stored on the wires. You can use the nodes as node registers or shift of feedback to store values between iterations of a loop:

  (this will keep subtracting y (starting with 0) and store the result for the next time it runs)

  LabVIEW also has functions in the range of mathematics/signal processing to make the detection of pulse on a waveform.

• How to reset the disk volume quota hard C

  Original title: Win XP volume quota

  I'm a partitioning of a HARD drive with win XP service pack 3.

  How reset the disk volume quota hard C, I can not get access to quota controls?

  Size of the disk, it's all the 100 GB, I can see on C is 54 GB. you will need to access the other 50 GB.

  1. What do you mean by "unpartitioning" a disc?  If you mean that you remove some partitions on a physical disk in order to have more space in a remaining partition, you should know that you will not be able to extend the partition system (usually c :)), even if there is unallocated space on the disk unless you use a third-party disk management tool.  Windows XP cannot do with its native tools.

  2. are you sure you really want to use disk quotas?  It would be unusual in their homes.
  2B. which means you that you cannot 'access' to quota controls?  You see the tab "Quota"?  Are you logged on as a user who has privileges?

  3. where are you looking that see you C 54 GB but think you should see 100 GB?

• How to choose the disk defrag for several devices in windows? Using Norton 360 do now.

  Hello.

  I was wondering if in Win XP or Vista, is there a way to disk defragment multiple devices?

  I go in disk defrag at the moment and can only do one disc at a time. I have run more than one player internal (and some external drives). So I need a bit of an automated process to turn it on and leave it alone. I use this option in Norton 360, it works fine as far as I can tell. But I guess that a windows application is more accurate or complete.

  Dual boot: Xp Home Edition 32-bit/Vista Home Premium 32-bit, portable: Vista Home Premium 64-bit.

  Thank you.

  Hello

  The version of the Disk Defragmenter MMC console is provided with Windows XP this the following limitations:
  a. it can defragment only local volumes.
  b. it can defragment only one volume at a time.
  c. it cannot defragment one volume while it is an another scan.
  d. it cannot be scheduled. If you need schedule disk defragmentation, use the Defrag.exe command-line tool.
  For more information on the use of the Defrag.exe command-line tool, click on the number below to view the article in the Microsoft Knowledge Base:
  Description of the new Defrag.exe included with Windows XP command line
  http://support.Microsoft.com/kb/283080/en-us

   
  For addiitonal information, refer to the article below:
  How to defragment your disk Volumes in Windows XP
  http://support.Microsoft.com/kb/314848
   
   
  Hope this information was useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to measure the amount of traffic?

  Hello ^ ^

  In fact the question what I say, it's different from other issues that people are making inquires.

  However, I want to know my question because there is no one who can teach me...

  Old time, I was wondering how to measure traffic

  In other words, I want to know measure 'capacity for fabric.

  I can easily see the 'capacity' in the data sheet.

  In the Dell 8024F datasheet, I found below a.

  

  It has "fabric capacity up to 480Gbps.

  I think that 480Gbps means the ability to traffic, right?

  When we choose to switch or router, we always refer technical sheet.

  As I said to you continuously, the idea of what I want is less than thing.

  How do you know and how to measure my traffic?

  Perhaps in order to measure capacity, there is a program or another method?

  Thank you.

  The ability of the fabric is the aggregate maximum speed of 24 ports. The 8024f has 24-port SFP + which are 10 GB. This means that the equation to be: 24 (ports) * 2 (duplex) * 10 (Gbps) = 480Gbps. This indicates that the switch is not blocking and can manage the total bandwidth of all ports.

  The switch has a usage page you can view. The page provides the following information:

  

  The network manager to manage open offers also the possibility to track the use of bandwidth capacity. Here is a link with more information on OMNM.

  http://Dell.to/1vss0OM