no internet access with lan peer-to-peer active

Similar Questions

• loss of internet connection on windows 7 pro 64. Says connected but no internet access with yellow exclamation point! Help, please!

  I keep losing internet connection, I have windows 7 and every time I connect it to the wireless internet works for 5 minutes, then a little ytellow icon pop up and say its connected without internet access. Its happened to me before and recently started happening to my cpu. I did a FRESH install of windows to see if it can help, but it didn't. IM literally on the point of throwing my processor through the cause of wall, I can't find a solution to this anywhere. Whenever the yellow icon pops up that I have troubleshoot and it indicates the default gateway was unavailable and that fixed it, then I have internet again for about 2-5 minutes and it does the same thing. Ive never had this problem on my cpu and the network has not been changed or anything, so I don't know what that the * could cause this. I literally wiped everything on my cpu and then do a system image to restore too. Ive been messing around with the registry, deletion of things here and there missions that I read, but only thing that happens is losing internet alltogether and must restore from system image. I'm really running out of ideas. Help, please. I have an adapter netgear wn311b wireless pci-express with the latest drivers.

  to detect new updates for network based components on intel:

  http://www.Intel.com/p/en_US/support/detect/?IID=subhdr+dnlds_detect

  You will be asked to download and install active x components.

  After the installation of the small file, click on the "expand all" button

  You can choose to update your components wired network if necessary.

  then re-install your wireless network management software.

  assuming that your wireless network is intact (connected, permits), you can surf the net.

  If the problem persists, troubleshoot more away:

  When the computer is turned off, set again you netgear pci wireless adapter.

  set of antenna for optimal orientation.

  Check if your computer is authorized by your wireless router.

  check the signal strength of your wireless router and the wireless pci adapter.

• How can I share my internet access with my Xperia Z2 via a usb cable?

  I would use my internet access pc-s on my phone, but I do not have a router and my pc cant share it wireless

  Try the following tutorials:

  http://www.howtogeek.com/117118/how-to-connect-your-Android-to-your-PCs-Internet-connection-over-USB/

  http://www.howtogeek.com/214375/how-to-reverse-tether-an-Android-Smartphone-or-tablet-to-your-PC/

• Using a cellular provider like internet access with an E4200

  Hello:

  I want to upgrade my home network a WRT300N towards a new E4200 and spend my MiFi cellular access DSL internet provider.  (The spd DSL is only 500K, and I can get up to 21 MB on cell phone at about the same cost.  Woopee!

  The problem is that only my supplier available a cellular access system is also a router without wire - a home network router small no less - a 4 G Netgear MBR1210 Turbo hub.  But she has a few ports ethernet on it.  So I think that I must configure network settings domestic suppliers to be totally different from my outgoing home network (different SSID, channel and different home range of IP address, disable DHCP if possible, via its outputs ethernet plug at the entrance to the INTERNET on the E4200 with a short ethernet cable and then use my Linksys as the DHCP server and the router for my home network wireless network.)  I have a very large network with many devices much more on what block takes care of the provider.  I can configure the linksys E2400 to accept the IP address that the MiFi unit never gives him as my Internet service provider entry and then configure the rest of the network, as it used to be with my older Linksys WRT300N router?

  See you soon!

  I think it should work.

  Connect your service provide router on the Internet on the E4200 Linksys port.

  Open the E4200 configuration page and check the IP address on the State of your router?

  Try to follow this link to routers towing cascading.

• Internet access with VPN Client to ASA and full effect tunnel

  I'm trying to migrate our concentrator at our new 5520 s ASA. The concentrator has been used only for VPN Client connections, and I have not the easiest road. However, I, for some reason, can't access to internet through our business network when I've got profiles with lots of tunneling.

  I've included the configuration file, with many public IP information and omitted site-to-site tunnels. I left all the relevant stuff on tunnel-groups and group strategies concerning connectivity of VPN clients. The range of addresses that I use for VPN clients is 172.16.254.0/24. The group, with what I'm trying to access the internet "adsmgt" and the complete tunnel to our network part is fine.

  As always, any help is appreciated. Thank you!

  Hüseyin... good to see you come back.. bud, yes try these Hüseyin sugesstiong... If we looked to be ok, we'll try a different approach...

  IM thinking too, because complete tunnel is (no separation) Jim ASA has to go back for the outbound traffic from the internet, a permit same-security-traffic intra-interface, instruction should be able to do it... but Jim start by Hüseyin suggestions.

  Rgds

  Jorge

• Internet access (W - Lan) but the symbol in the taskbar looks as if it was searcheing

  I have access to the internet (W - Lan), but shows the symbol in the taskbar on the right side of the bottom of the screen that I havn't. All beams of force field are grayed out and the little sun is visible, as the system does when it searches for a network connection. As said, I have access, but the symbol seems strange, as it is looking for a W - Lan net.

  Can anyone help?
  Thank you

  Hello

  Thanks for posting your question on the Forums of community of Microsoft.
   
  1. use Windows Wireless Management or another Manager?
  2. don't you make changes to the computer before the show?
   
  Follow the steps and check if that helps:
  a. click on Start menu and enter regedit in the search bar and press ENTER.

  b. go to:

  Settings\Software\Microsoft\Windows\CurrentVersion\TrayNotify HKEY_CURRENT_USER

  c. remove the following key data in this folder:

  IconStreams

  LastAdvertisement

  PastIconsStream

  PromotedIconCache

  UserStartTime

  d. open the Task Manager.

  Switch to the processes tab.

  Kill all the process explorer.exe

  (This is necessary because the explorer.exe has a copy backup of this key in RAM and rewritten it in the registry during shutdown)

  Switch to the applications tab of Task Manager.

  Press "new task".

  Type "explorer.exe" and press [Enter].

  WARNING: Serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  http://Windows.Microsoft.com/en-in/Windows7/back-up-the-registry

   

  See also:

  http://support.Microsoft.com/kb/937477

  I hope this helps.

• No Internet access with EA2700

  I recently bought an EA2700 to replace an old Belkin. I ran the set up CD and I'm unable to establish an internet connection. I am able to connect to the router (wired and wireless), access the settings, etc. but can not reach the net. I tried to disable the firewall, DNS of hot flashes, disabled IPv6. Did all the basic steps, resett the router/modem, etc... nothing. I plug in the Belkin and it connects fine. Any help would be great.

  Oh, Ive tried my laptop (win7) and desktop (Windows XP) and both have the same problem.

  I hate it when the solution is simple.

  Thank you very nice folks at Cisco, we were able to get the connection.

  We have:

  -by default of the router (reset button)

  -power to bike all devices

  -uninstalled and reinstalled Cisco Connect (did not try the first time around)

  -After the configuration, an update was necessary.

  -After the update is finished, the internet connection was created.

  Hope this helps

• Internet access with Verizon Jet Pack work?

  Just signed up for Adobe CC download fails. Check the internet connection. I use a Jet Pack from Verizon. It will work at all?

  Hi DebLuttrell,

  Please refer to the below links:

  Troubleshoot Adobe Creative cloud download, install and update questions

  Solutions to connection errors, activation and connection with creative Cloud applications and Creative Suite

  Let us know if that helps.

• Internet access with delay on safari

  I use a connection high speed fiber optic. My network is configured as below, located in a two-storey house. The apple express is on the 2nd level:

  

  For some reason any the everytime I open a Web page, it opens with a delay - i.e. After you press ENTER, it puts on hold for 10 to 15 seconds and then the page will open. This only happens if I open the page first time in a session. If I close and open the same page after a few minutes, it opens instantly, but if I open the next day, then again to delay. This only happens on the Imac connected on 2nd level. MacBook connected via the wireless at level 1, no problem.

  I tried to solve the problems, but no effect.

  -changed the DNS setting, after looking for a closer and faster server.

  -reset the apple express.

  any ideas, on how I can remedy this. Thank you

  you have two routers that come out of your cable Modem?

  What happened when the iMac connects to the "wireless" router as well as the Macbook?

• Can I order vista sp2 and all the other updates on cd-rom, as I have limited internet access, with a telephone modem prepaid, Email removed for privacy

  I run an Acer Aspire, Windows Vista home basic sp1, Mobistar connected download capassity only 250 MB

  No I know not. See this previous discussion: http://social.answers.microsoft.com/Forums/en-US/vistainstall/thread/f6c7f79b-b88d-490f-8542-e57b1ff3cf6f

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been postponed until February 26, 2010, so move on! Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• After the abduction of a trojan virus, I still have no internet access

  After the abduction of a trojan virus, I still have no internet access with Internet explorer, Google Earth, or Yahoo Messenger. Attempt to update Yahoo Messenger from a download of update, a message indicates "Yahoo Messenger is unable to download files needed for installation. Please check the firewall settings and try again. It does not matter whether or not the firewall is disabled. Yahoo Messenger is able to connect, but not to show me the list of the rooms in the right panel. Firefox still works fine and all I use.

  Here are a few things to check after an infection or elimination:

  We will check your network connection properties.

  Some malware will alter these settings and your anti malware software can't tell if you have changed the malware changed them or so, after removal of infections, it will leave just the settings as he finds them (it is usually a good thing), but can leave your disabled Internet access.

  Click Start, run and enter in the box:

  Inetcpl.cpl

  Click OK to launch the Internet Properties Control Panel, choose connections, LANsettings.

  Or, in Internet Explorer click on tools, Options, connections, LAN settings.

  These settings control your Internet access for all browsers.

  (If you make settings, write them down so you can undo changes if you must)

  On most environments, not independent, there will be check automatically detect settings and the other boxes are (as Proxy Server) is disabled.

  Automatically detect the setting checked =
  Use the automatic configuration script = unchecked
  Use a proxy server for your LAN = not checked

  Make changes, then click OK, OK to save the settings.

  Check your settings for how your network adapter gets its IP and DNS settings.  On most home systems, these parameters must be defined for the system will get the settings automatically.

  If you have another system on your network that works, you can compare these settings with the settings of the system which is not a work and make adjustments.

  Click Start, settings, Control Panel, network connections, and then select your current network connection.

  On the general tab, click Properties.

  In the drop down in the Middle, find and highlight the selection of Internet Protocol (TCP/IP) and click Properties.

  In the Internet Protocol Properties window, the usual selections are to get the IP and DNS settings automatically.  Select the following two options:

  Obtain an IP address automatically
  Get a DNS server address automatically

  The rest of the options on the screen should then be grayed out/not available.

  Make changes, then click OK, OK to save the settings.

  Restart your computer and test your connection.

  If it still does not work, check your settings are still in place after a restart and then release and renewal IP of your network device configuration settings.

  Click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window, and then type the following commands:

  ipconfig/release

  ipconfig / renew

  output

  Restart your computer and test your connection.

  Download, install, update and do a full scan with these free malware detection programs can solve any problems:

  Malwarebytes (MMFA): http://malwarebytes.org/

  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

  It can be uninstalled later if you wish.

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• I need the Java Player for firefox on a stand-alone computer without internet access. I have internet access on another computer. How can I do this?

  I have a stand-alone computer (no internet access) with firefox to run the Java Player. I have internet access on another computer in order to download files and hover over things to the stand-alone computer to install. That do and where can I download and how I install on the stand-alone computer.

  Thank you

  Leroy

  Hi, to get the Offline Installer that you can use on the computer without internet access, please visit https://java.com/en/download/help/windows_offline_download.xml

• no internet access at el capitan

  Mac Pro with El Capitan. No Internet access with any browser, but I can access the Internet using the recovery system (this is what I now use to access the site of discussion). Already verify permissions and fix them with disk utility. Other Mac connected to the same router (Apple) can access the Internet without problem.

  It seems I have to re - install El Capitan. Fix?

  How you access the Internet? Wired or wireless? Do you have a good IP address? (Note that the one that starts with 169.254 is NOT good.) What about the access with something else outside of a browser, such as the Mail app? Other devices on your local network can access the Internet?

  Good luck.

• "Windows 7 will not let iTunes 11 Internet access."

  I am using Windows 7 32 bit on a laptop computer with ZoneAlarm free firewall/antivirus and Firefox 17.0.1 browser (do not use IE 8 and IE 9 will not even load, so crazy that).  I had no problems with iTunes, Internet access until about two or three Windows updates there, when I was still with iTunes 10.x, I thought that maybe an update to iTunes was in order, so I did and updated to iTunes 11.  That didn't connect to the internet, so I deleted, close ZoneAlarm and reinstalled iTunes.  Still no Internet access even if I have an active Internet connection.  I ran the diagnostic iTunes and found this Windows Firewall - which * he * stop when running ZoneAlarm - does not allow iTunes outgoing access, so I fixed.  Still nothing and it is with the browser able to connect to the network, so I don't know Internet access in itself is not the problem.  I have so stop and you exit ZoneAlarm. still nothing.  Verified that welcomed iTunes Windows Firewall outgoing; It does (in theory; at least she said it does), but STILL nothing!

  It's stupid, because iTunes worked fine until recently.  Is there something other past here between Windows 7 and iTunes I should know about?  Help!

  HI Maria,

  Thanks for posting your query in Microsoft Community.

  It appears from the description of the problem you are facing problems with iTunes.

  I imagine the inconvenience that you are experiencing. I will certainly help you in this matter.

  1. are you able to launch Internet Explorer?

  2. What is the exact problem you are facing with Internet Explorer?

  Please follow the steps from the link and check that it works very well.

  iTunes for Windows: network connectivity Tests

  http://support.Apple.com/kb/HT3204

  Reference links:

  iTunes for Windows: can not access the Internet if the proxy settings are incorrect

  http://support.Apple.com/kb/TS1490

  Unable to connect to the iTunes Store

  http://support.Apple.com/kb/TS1368

  Hope it will be useful. If you still have questions, please reply and we will be happy to help you.

• Can I restrict or limit internet access on a farm in RDS?

  Location:
  -need to allow remote access to the farm of RDS Internet of remote sites (without VPN)
  -Sessions close require access to the intranet using IE (Dynamics CRM)
  -Some users do not use internet in a responsible manner (wasting time, inappropriate sites, etc.)
  -need ability to prevent browsing of the sessions

  I know that we could set up a proxy server (IAS or similar) at Headquarters but I can't handle this being rather long and frustrating for users (and so myself).  I have also no prior experience in the implementation or management of a proxy server (just to know that they can cache and filter web site traffic), so one for 300 active users on the portal management would be a problem.

  If I want to avoid using a proxy server at Headquarters can I do a GPO or something to prevent casual internet browsing from just the servers in the farm?  If we can allow access to specific sites (white list) which would be an interesting option, but not a condition in this regard.

  We review to implement a form of filtering on remote sites affected (using K9 agents on computers personal or similar) of the internet, so we should just remove the back door of the use of the farm to browse the internet and circumvent the once connected local filtering.

  Remote sites use stations XP and Win7, configured in mode working group.  Each site has 2 to 4 computers.  Remote sites share their internet access with computers not relating to staff, so we are reluctant to restrict internet access for all users on the site (using the subscription services provider of firewall for example).  There are more than 20 remote sites.

  The farm is built using the 2008r2sp1 server.  We have a RDS (also a dedicated redirector) gateway and 4 session host servers.

  Any ideas?

  Try asking in the Forums of Windows Server:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/