How to merge pictures of external drive for disc top desk into the same master catalog?

Similar Questions

• I can no longer import clips for my external drives... final cut gives me the ability to import on my hard drive... you just buy a new drive for G and I have the same problem

  I used to be able to import clips on my external drive of G and change events I had saved on the drive, but this problem started after I tried to import video from a camcorder sony I had connected the G drive.  Now when I try to import the clips, it don't give me the possibility to choose one of my records G, I can only import directly on my hard drive.  I can't open the previous events I backed up on my external drives.

  What version of FCP X?

  Russ

• What is the best solution when my external drive for Time Machine is full?

  Hello

  I use the latest version of Mac OS X on my iMac 27 ". I use a drive outside of 3 TB G-Tech for Time Machine backup. Due to my recently many RAW photo images, I have less 8% left storage on my external hard drive, so I'm trying to figure out next steps in what concerns the strategy of external storage and have the following questions:

  • When my external drive for Time Machine is full, it is my understanding that older backups on external hard drive will be deleted to make room for newer backups. If the oldest backups contained pictures (whose records have not changed since the time they are initially stored), then I guess that these photos will be removed from the external drive - correct?
  • If I had to replace my external drive for Time Machine with a new external drive which is as big or bigger than the one it replaces, what should I expect on the size of the initial backup on the new drive? I guess the size of the backup would be exactly equal to the current amount of storage used on my drive hard iMac - correct?
  • Would it not be possible to connect the external drive for Time Machine existing at a new Time Machine external drive so that when the original disk is full, the overflow will be automatically stored on the new external hard drive for Time Machine? (If feasible, it seems that this strategy would maximize my external storage capacity vs just replace external drives.)

  I realize that my first two questions are rather basic, but I don't want to make any false assumptions. The third idea is intriguing and I would like to know if this is a viable option.

  Thank you

  Brian

  older files are starting to get deleted because the disk fills up then Yes, they went

  the backup drive should ideally be 4 times the capacity of your current drive, twice is good but has its limits. Also factor in what you store: a jpeg from the web and a raw photo file are the two images, the size of a is very different. If you work in high-resolution or large native files, or audio files (record pro, no music files) or video production twice the disk fills up very quickly. If you collect photos and JPEG and mp3 files or a handful of videos not so much is necessary.

  I would keep the old drive intact if you want to replace and start over with a new drive, if that's the plan. You have the old data, you can keep it somewhere safe and have a redundant backup which you can reconnect at any time to restore from. Let the new index drive itself with new data and take if from there, in the case otherwise you can copy the backup to the new drive and set the drive as the new source of backup but personally I wouldn't copy of the data, that's my preference, it may not be yours and that's fine.

• Migrated my external drive for 'Photos' photographs - after a month of success now unable to access them. No idea why?

  My computer tells me I have migrated my photos from an external drive for 'Photo', but in 'Photo', I can only find 4 pictures that are on my internal drive. Any ideas? I was able to access the photos a month in "Photo".

  Thank you

  Bruce

  Nope - we can't see you, so you must provide details for assistance

  What has changed since it worked?

  If you launch pictures while holding the option key, you get a window select Library - check every library here and I hope that you find the right pair

  LN

• Drive mapping: How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.

  How can I get my external drive be mapped to F: (as he was once) rather than g: which is what happens when I turn on now.  I tried to unplug and power, reboot etc.  There is no F: drive connected to the computer.

  Go to start / Control Panel / administrative tools / computer management / "disk management and select external reader by clicking on it and then right-click on it and select change drive letter and paths."  It should show the letter currently assigned (G I guess).  Click the button change.  To the right will be a drop of drive letters box.  Go ahead and select F and click on OK.  That should do it. If F is not available, then it is used by the system for something else.  Check disk management to see if you can find it.  If it is not, and is not available in the list, I'm afraid, you will not be able to change until find you what is using drive letter F and remove it, or change it to something else.

  I hope this helps.  If this isn't the case, after return and we will try to understand what is using F or why it is not available.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to add a 2nd hard drive for HP Pavilion DV7!

  How to add a 2nd hard drive for HP Pavilion DV7-3165DX, product # WA794UA or WA794UAR.

  (1) classification of the HDD, hard drive, hardware kit. Disc kit HARD material includes mounting rails, static shield, screws, insulators in rubber and SATA cable from the motherboard. Check your model & product # to ensure compatibility.

  Material of parts HP HDD Kit 517639-001 for DV7-3165DX product # WA794UA and WA794UAR.

  (2) training of consult - Windows 7 PDF, table of contents, 7 replacing a drive in secondary hard drive Bay. This will show you how to install a 2nd HARD drive in an HP DV7.

  Readers - Windows 7 PDF

  (3) to select a Windows 7 computer, select the installed HDD, Format (if not already formatted).

  (4) if the drive HARD does not appear in Windows 7 under computer, go to the Start Menu, find programs and files, enter "Computer management", select storage, disk (Local) management, look for the 2 HARD drive Bay (should appear as disk 1, Bay 1 HARD drive should show as disk 0), Format of the 2nd HARD drive (the one that you just installed).

  Update: I have the 2nd HDD (WD 1 TB) installed, Windows recognize now after completing the steps I mentioned in step 4, Format with default allocation NTFS 931,51 GB free, 118 MB USED to put in shape. Format exFAT to allocation by default 931,51 GB free, 1 MB used to put in shape. I chose NTFS format to reduce the fragmentation of the file.

  My solution.

• Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.

  Should what format I use for my external drive for time machine?  I have a WD 2 TB that is formatted for PC new drive.  When I got to disk utilities to erase, and then reformat the options are

  1 mac OS extended (journaled)

  2 mac OS extended (journaled, encrypted)

  3 mac OS Extended (respect for case-sensitive, journaled)

  4 mac OS extended (case-sensitive, journaled, encrypted)

  See the information below If you can not back up or restore your Mac with the help of Time Machine - Apple Support

  When you select a drive to use with Time Machine, your Mac automatically prompts you if you need to reformat the drive.

  • If you are using an external drive connected to your Mac, use disk utility to make sure that your backup disk is formatted in HFS + extended (journaled) and is the partition type GUID Partition Table (GPT).
  • If you use a time Capsule, formatting the drive for Time Machine preferences automatically formats the drive as HFS + Extended (respect for case-sensitive, journaled) with a GUID Partition Table (GPT).

• How can I get a boot drive for windows vista

  How can I get a boot drive for windows vista

  Hello

  Here's how to do a startup, vista etc disc repair

  It is NOT a reinstall drive

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  How to reinstall Vista

  Contact the computer manufacturer and ask them to send you to vista recovery disks to reinstall the operating system back as it was when you bought it

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F8, F9, F10 or F11 or Alt + F10 or 0 to start to start the recovery process according to the manufacturer

  Ask them of the exact key sequence

  or borrow a vista microsoft dvd; not a HP, Acer recovery disk etc

  Make sure that you borrow the correct 32-bit or 64-bit microsoft dvd to your computer

  they contain all versions of vista

  This is the product key that determines which version of vista is installed

  http://www.theeldergeek.com/Vista/vista_clean_installation.html

  How to replace Microsoft software or hardware, order service packs and replace product manuals

  http://support.Microsoft.com/kb/326246

• How can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC in Vista?

  Dear all, please let me know how can I re install a Driver for my cam ASUS USB 2. 01.3 M UVC, using Windows VISTA

  * original title - re install usb 2.01.3M UVC for asus computer webcam *.

  Hi mounthalakongvongsa,

  What is the number of model of your laptop or desktop?

  You can provide the model number on the site below and search for the drivers.

  http://support.ASUS.com/download/download.aspx?SLanguage=en-us

• Used the external drive for catalog/photos for months. Yesterday-> error msg: "LR cannot open the catalog"StanLRCatalogRepaired"on"Seagate Drive - LR Photos"because LR cannot save changes to this place. LR catalogs cannot be opened on removable disks,

  Used the external drive for catalog/photos for months. Yesterday-> error msg: "Lightroom can't open the catalog named"StanLRCatalogRepaired"located on the 'Seagate Drive - LR Photos' volume because Lightroom can't save the changes to this place. Lightroom catalogs not opening on the network volumes, removable storage, or read only volumes. »

  The first thing to do is to check if somehow the permissions for the drive Seagate or any of its relevant folders/subfolders has changed somehow (an OS update maybe?)

• How can I get a twain driver for CS5 for Windows 7?

  How can I get a twain driver for CS5 for Windows 7?

  Since you have photoshop cs5 in the x 86 program files, then you have the 32 and 64 bit versions of photoshop cs5 installed.

  the 64-bit version of photoshop cs5 is in

  C:\Program Files\Adobe\Adobe Photoshop CS5 (64 bit)

  and the 32-bit version is in

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5

  
  

  
  

  If you have not changed anything in the menu programs, while two versions of photoshop cs5 should be included under Start > all programs

  
  

  
  

  Photoshop CS5 is the 32-bit version

  
  

  Photoshop CS5 (64 bit) is the 64-bit version

  
  

  You put the Twain plugin in Win32 folder from the link listed in the #1 message in the Photoshop CS5 32 bit Plug-Ins > import file

  C:\Program Files (x 86) \Adobe\Adobe Photoshop CS5\Plug-ins\Import-Export

  TWAIN plug-ins | Photoshop CS4, CS5, CS6

  VueScan that mentions Ronald Keller is also a good option if you do not want to be restricted to the use of the 32-bit version of photoshop cs5 to scan in photoshop.

  
  

  Scanner VueScan for Windows, Mac OS X and Linux software

  
  

  
  

  Photoshop cs5 should also be able to use WIA support for your scanner.

  It would be under the file > importantmenu t in photoshop cs5 after you have your scanner is connected and turned on
  

• Install Windows 8 on external drive Thunderbolt - Windows could not prepare the computer to begin the next phase of installation

  Hi all

  I'm at my wit's end trying to install windows 8. Let me start at the beginning: I used to have windows running on my Mac Pro ssd internal 8.1, installed via bootcamp. It worked well for a while, and then refused to start, gives me a blue screen KERNEL_SECURITY_CHECK_FAILURE. Despite some advice from lonely T, I was unable to fix and ended up wiping the partition and relocation, again via bootcamp. Yet once again, it worked for a few months, then the same problem. I made this one last time, and it only lasted 2 days... So I gave bootcamp.

  I think that the hybrid MBR partition scheme that implements bootcamp is the culprit, but I don't really have evidence to substantiate this claim. In any case, I tried to install windows in EFI mode. (If I understand correctly, the hybrid MBR is set up to allow windows to install in legacy BIOS mode, but that windows 8 may now install efi, which supports my Mac Pro mode.) My Mac is the new Mac Pro (end of 2013, trash in shape), and I can say short UEFI 2.0 (I have the latest efi update from apple installed).

  The method I'm trying:

  1. create a new partition in HFS + on my external drive using disk utility. The drive has now it's efi partition and partition empty 750Go I want to install windows a 1.25 TB storage partition that I use with my mac. It has a GPT. I formatted HFS + and no FAT, because I think that disk utility creates the same hybrid-MBR as training camp every time a FAT partition is created.

  2. use gdisk to confirm that the disc does not have a hybrid-MBR. (sudo/dev/disk1 gdisk watch MBR: protection)

  3 restart my mac and hold the possibility to put in place to bring up the boot efi menu.

  4. Select the EFI_Boot DVD icon (that's the windows 8 install dvd that I have in my superdrive USB drive)

  5. go in the menus of the disk selection screen installation and delete the partition in HFS +, I created to install windows on (the format option is not available)

  6. now select "Unallocated space" on the good drive and click Next.

  The problem:

  Partitioning seems to go ok (there is no feedback on this basis, but it proceeds to the next screen, and all new partitions expected are there if I check diskutil list later). He said it is "copy of windows files", but then stops with the error "Windows has no prepare the computer to start the next phase of the installation." To install Windows, restart the installation. "If I restart, I can start the same process all over again and get the same result.

  The Question:

  How I get this error and get windows install?

  Extra pieces:

  • The first time it happened I assumed it was the new sip / thing "without roots" in El Capitan, causing problems, then I disabled, but I still get the same error.
  • After reviewing the diskutil list output after one of installs it without success, I found that a labeled EFI partition has been created after my storage partition (the original efi partition was still there in the upper part of the disc).
  • I have windows 8.1 installed now bootcamp on my internal ssd. It was planned to use it and winToUSB to put windows on my crush, but I found that it only works with usb2. I do not have installed could cause problems with the installation on another disk.
  • Before say you I can't run windows on an external, yes you can, and many people have. I read windows sees thunderbolt internal disks.
  • I read a few other posts on this and other sites on this problem, but could not find a pertitnant solution to my situation. I found one that suggested to remove the efi on my disk partition, but that seemed like a bad idea, so I didn't try.
  • I write this at 1 in the morning after a day spent in front of the computer trying to get this working, so please excuse typos typing or other. I am pleased to provide you with any pertinant information helping you will help me.
  • Thank you!

  The other thing I tried also almost succeeded:

  Although I prefer to get the method above works, because it seems the most promising, is something else, I've tried that I thought worth mentioning. If you offer advice pertaining to this method rather than the above, I would appreciate it if you could explicitly declare that at the top of your answer. Thank you.
  

  I tried to install windows on the physical disk using vmware and virtual box. The instrutctions I followed for this can be found here: http://www.andrewsavory.com/blog/2011/2156 (the only thing different, it's because it's on an external drive, I created the Fat 32 partition manually using disk utility). The first time (using vmware) installation seems to go off without a hitch, but I couldn't get my computer to see the windows partition as bootable with the boot efi menu hold-option regular refined or with system preferences-> startup disk. I think that I was using always inadvertently a hybrid-MBR at this stage. I tried to repeat this new beginning with the first two steps above to avoid the hybrid-MBR. But now when I try to create the virtual machine based on the gross vmdk, it starts to copy the files then says not sufficient permissions and fails. I don't know if it's a permission with the disk or the hard problem. I tried chmod 777 and chown $USER of the vmdk disk (/ dev/disk1s3) does not.

  Wow, that was a long post...

  1. when a second drive is detected by the Windows Setup program, he wants to create his own brand of EFI (104 MB) and not to mess with the Mac EFI (200 MB). You can force it to use the EFI to the Mac using Diskpart commands.

  2 instead of HFS/FAT32, create a piece of 750 GB free space and it should only get a new MSR/MSD, without the part of EFI.

  3. on your VM method, the link you have is quite old. You have a MP 2013, with references to the 2010 Mac alumni and is a bit too archaic to be useful. http://forums.macrumors.com/threads/install-a-Windows-7-partition-on-Mac-OSX-Wit hout-optical-car-or - usb.1836959 / #post... seems to work for many and can be useful for a test. It also uses Winclone.

  4. you can also try http://bleeptobleep.blogspot.com/2013/02/mac-install-windows-7-or-8-on-external. html .

• IPhoto migration from an external drive: stuck with hard links to the external hard drive

  I got my IPhoto library on an external drive. To migrate to pictures, I dragged the IPhoto (on the external hard disk) file to the Photos icon.

  Migration went well, but instead of importing data to the external hard drive to my macbook, Photos stored links on the external drive. Now whenever I start the Photos, the system tells me it takes the external drive to view the contents of the library.

  To resolve this problem, I tried to copy my IPhoto library on my macbook and redo the import. It does not work: Photos, said the library has been upsized already (I noticed that the IPhoto library has been renamed 'iPhoto Library.migratedphotolibrary')

  Is it possible to reverse the migration or mark the IPhoto library as not yet migrated? Any other suggestions?

  Thanks for your help!

  Rename the copy of the iPhoto library on your internal drive to 'iPhoto Library.photolibrary '.  Then drag the library renamed on the Photos icon and pictures will create a new photo library on your internal drive.

• SE error message: "Windows cannot load the driver for this hardware device. The unit may be damaged or missing. "When you try to install new drivers for DVD players

  Original title: CD/DVD drives do not work after upgrade from XP to Vista

  I upgraded my dell E521 to Vista dimension, but now finds that none of the CD/DVD drives work.  I also tried two external drives, same thing.  I downloaded the new drivers for the internal disks and when I tried to install the windows said they already had the best drivers.  Both drives are TSST - I get device status "windows cannot load the driver for this hardware device. The unit may be damaged or missing. "I want to upgrade to 7, but can not run the dvd, and apparently MS has no download available if you purchase cd!  Am tearing my hair!

  Hi krt2,

  In general, the error can be caused by a missing required device driver, a required binary file is damaged, if there is a problem with the process I/O file, or if a pilot that makes reference to an entry point in another binary file which can not load

  You can try to uninstall and reinstall the driver for the device to solve this problem.

  Step 1: Uninstall the CD/DVD driver. Follow this step to do the same thing:

  a. click the Start button, select Control Panel, click System and Maintenance and then click Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  b. expand CD-ROM/DVD-Rom drives-> right click on the device, and then click Properties.

  c. on the device properties dialog box, click the driver tab, and then click on uninstall.

  d. restart your computer.

  Step 2: Reinstall the CD/DVD driver by visiting the manufacturer's Web site.

  See the links below for more details on the update of drivers:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Also, read the following article and check if that helps.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• COM1 "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) »

  Running Server 2003, Web Edition SP2 Build 3790.

  The two ports COM1 COM2 & lost in the Terminal Server session with a managed switch.

  Gives the device as Manager: "Windows cannot load the driver for this hardware device. The driver may be corrupted or missing. (Code 39) "on both ports.  pilots - serial.sys and serenum.sys (5.2.3790.3959 worm file: 64 KB / KB 18: 2/17/2007) 03:58

  Tried all common solutions driver update and uninstalling/reinstalling SP2 installation rerunnig. But the problem remains.

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on TechNet. Please ask your question in the TechNet forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverhyperv/threads

   

  Diana

  Microsoft Answers Support Engineer