How to merge the C drive and unallocated space

Similar Questions

• How to reformat the hard drive and do a "clean" install

  A recent virus attack, my computer has lost some files of the operating system.  With the help of the Lim has provided the recovery disk, which offered ' upgrade/repair' or a 'new installation '.  I chose ' install new ', actually I found many of my files are still there - that means that if a virus has escaped "Detection / removal" will always be there.

  Question: How to reformat the hard drive and do a 'fresh install' on a clean hard disk "? ". (I have a drive to Win XP with service pack 3 and a driver disk for the hardware installed on my computer of the regulations.)

  Thanks in advance

  Skip

  Since you have a Dell and a recovery CD and not a recovery Partition, check how many partitions you need by using disk management:

  http://www.theeldergeek.com/disk_management.htm

  In case you have a partition with the operating system and a partition of the utility partition, I would only recommend formatting the partition from the OS. The Partition utility can be very useful.

• How to merge the C drive to the D drive

  My local C drive has 100 GB on it. I have another volume of disk D with gb 122 on it.

  Now, I know that this question has been asked many times before, but I am still very confused with how you can actually merge the two into a main C drive.

  I find it very strange that ASUS (my computer) performs the main drive that is smaller than the other partition.

  All advice is appreciated.

  Thank you.

  Hello

  Windows 7 has the software to do this in disk management, the partitions are adjacent to each other.

  He is recording of data on D: > D: remove > and then extend C: into the unallocated space where D: is

  ""How to extend a Partition or Volume in Windows 7 " "

  http://www.SevenForums.com/tutorials/2670-partition-volume-extend.html

  See you soon.

• Satellite P30: How to format the HARD drive and install a new OS?

  I have a satellite P30 laptop with Windows XP. I plug myself a new OS (namely because I can't find my old recovery CD CD and OS) that I want to do a re-shape full of my system. Reason is that my system has been painfully slower and slower over the last year. I even updated my RAM to 512 MB standard supplied with the machine to 2 GB, but it seems to have had little or no effect. So my questions are:-

  1] where can I get my hands on the restore CD that has all the drivers on this subject, and any recovery CD to reformat my HARD drive?
  [2] in the order in which I will make this reformatting?
  How can [3] after having bought an external HARD drive to keep files that I don't want to lose, I transfer those of before my re - format?

  Any help will be greatly appreciated

  :-)

  Hello

  You received with the laptop Toshiba Recovery CD! Am I wrong?
  So what s the problem?

  Simply insert the CD and try to boot from this CD.
  The restore CD contains all Toshiba drivers, tools and utilities Windows OS + additional software like Win DVD for example.
  The installation will set the laptop to factory settings, but will also format the HARD drive!

  Up to now, we come to the point 3; --> How do I save the data
  If you have purchased a second HDD and connect it to the USB port and transfer all the necessary files on the second HDD
  If you have purchased only the HARD drive, then you will need a USB HDD 2.5 case.

  Best regards

• How to format the hard drive and do a clean install of XP?

  I have a legal windows XP profesional version to install and I need advice on how to format the hard disk, the version on it now was apparently a pirate vers.its years since I, did such things and my mind is old so I really need all the steps, a - z,.

  * How can original title - I wipe my hard drive and install win XP Prof? *

  Hi syynbbad,

  In addition to the post of cbarnhorst, please see the following article on how to do a clean install of XP:

  http://support.Microsoft.com/kb/978307

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• How to: update the hard drive and memory

  Original title: what are the steps to replace my XP hard drive and improve memory? Still use XP.

  How do they manage the software requirements? I have an external hard drive. How to start the computer after the equipment is replaced? The company I bought the machine from five years ago and recently new parts is not provide much information, since their site or their non-English natually Tech.

  Hello

  · What is the number and the model of the computer?

  To replace the hard disk, you must open the computer case. I recommend you contact the manufacturer of the computer or any local technician for assistance.

  Upgrade memory, can be found: RAM: add more memory to your computer: http://www.microsoft.com/athome/setup/addmemory.aspx

• HARD drive gone bad. How to replace the HARD drive and reinstall operating system without a recovery disk?

  I have a HP with Windows 7 Home Premium TouchSmart tm2.  The HARD drive is clicking and will not start.  Error: Device not found Boot.  I guess I have to replace the HARD drive, but how can I restore/reinstall operating system without a recovery disk?  Windows was preinstalled, and I have the product key.  Thank you.

  Hello:

  You can order a recovery disc defined by following the instructions on the link below.

  http://support.HP.com/us-en/document/c00810334

  or...

  You can download the 32-bit or 64-bit version of windows 7 Home Premium ISO on the link below and use your product key to activate the installation.

  http://www.mydigitallife.info/official-Windows-7-SP1-ISO-from-Digital-River/

  You need a program that will be able to burn ISO files so that the DVD is bootable DVD burning. Burn at the slowest possible speed for best results.

  Then install all the drivers you need for your PC support and driver page.

  Paul

• Satellite A660 - 1 H 7 - How to replace the hard drive and reinstall Windows 7

  Hi all

  I'm frequently getting warnings about the health of my hard drive and while it is not catastrophic, I've been umming and ahhing (?) on the replacement of an SSD in the future anyway so thought it was a good excuse.

  My real question is, what the procedure is perfect (or greater) for Windows 7 migration to the new drive? I think I want a default installation because this laptop has had so many programs installed/uninstalled it's probably a bit of a mess.

  I have created 4 recovery DVD disks but have seen on the net they don't work and that download an ISO with the vignette product key can work either. I can't really afford interruption much (or all) so I try to do it safely and securely as possible!

  Any help would be greatly appreciated and thanks for your time,.
  Scott

  > what the procedure is perfect (or greater) for Windows 7 migration to the new drive?

  I think the fastest solution is the use of the recovery disk that you created using the recovery media creator Toshiba. I don't see a reason why it should not work as part of a new SSD.

  I also have another recommendation.
  You can create an image of your current HDD (partitions) using internal Windows 7 Backup and restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/backup-and-restore

  After using the recovery disk, you can use the created image to get the current status.

• How to merge the C: and D: drive into one?

  I have a laptop replacement, once again and now I realize that when I install games, game files will be found in the c drive which is only 100 GB, while the D: drive is Go 930, it wont let me install more files as c drive is already full. Is there any method to merge the 2 drives into one?

  Andre_Castillo14

  so I have to uninstall the game and reinstall on drive D:

  Right.

  And to answer your original question... no way to "merge records". Especially not when they are 2 physical disks separated with a disk on each partition.

• My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also backed u

  My computer with two hard drives and 2 starting systems has the car crash in the solid state. When I got the new drive and tried to restore from time capsule, I lost some data. How can I see what backups are on the time capsule? My laptop is also saved to the time capsule. Everything is in 'Data' when I look through the Airport utility. I think that the information that I've lost are still there since I was a Capsule 3 to.

  Time Machine backup to a sparsebundle.

  The sparsebundle will use the share name of computer. So, it should be obvious who is your Macbook and that is your Macpro.

  Open the sparsebundle in Finder and keep open the subfolders until you get to the backup of each separate hard drive...

  You has of course set the exclusion in Time Machine?

  By default, Time Machine will exclude your second drive unless you have included it. Did you?

  Once you get to this level during the backup, you can do a full restore manually whenever you want.

• OfficeJet 6500 E710a-f: how to download the latest firmware and the BASE driver for my Officejet 6500 on Windows 7

  I'm looking for a way to download the latest driver and firmware base packages for my Officejet 6500 E710a-f for Windows 7, x 64 (latest patches and service packs applied).

  Regardless of the road I take (including the link called "Download drivers"), finding drivers inevitably leads me to the same page that contains the vertical tabs named 'Troubleshooting', 'How to' and so on and none of the links - not even under 'options to support more' - led to a Basic downloadable driver package. In fact, none of them leads to a downloadable driver package of all kinds. The most that I could find is that package Wizard driver installation that attempts to download the package that I am not interested in-oh and a few mentions in the KB articles downloadable driver packages.

  I also tried "Printer Setup, Installation" & Setup and then variously "Installation, install & connect printer ' and 'Software updates' & Firmware, which none offer a downloadable package.

  This used to work perfectly fine a few months ago, but now I'm getting round on the same page over and over again. I can not find the basic driver or the software for the printer more.

  Where can I find the basic driver package (used about 30 MB in size) in order to avoid the crapware included in the package (130MO) "full feature" more great who gets automatically downloaded to an unknown destination on my hard drive using this driver installation wizard. It's my PC and I want to be the one who decides in which runs when and how. Now I can try to track down the location of download using ProcMon and what not, but it would give me is this package 'feature complete' with a bunch of crapware added on strictly necessary. How to get the base driver package?

  Thank you!

  Never mind. Fascinating, the "Download drivers" link under the Support tab at the top leads to a different page that the link "search for drivers' next to my question posted .

  Both methods require enter the name of the model (after picking "Printers" in the first case) in a similar way, but the former led in circles on the same page with no possibility to download, while the latter one immediately takes me to the downloads, I was looking for.

• How to replace the audio driver by default and applet on Windows Vista Home Premium Dell Inspiron 1545 laptop computer?

  I had sound problems and got a pop up saying audio applet did not work, I chkd the sound test in Control Panel and drivers in Device Manager it says all drivers have been updated and had a MS Mr. Fixit scan and everything said it was OK. Also I went to chat with and MS engineer who just told me to do the things that I had already done so who did not help either.  Then, I lost all sound and when I went and chkd Manager of devices, he said that the sound driver was not installed, I went to Dell to have a driver update installed thinking to recognize the missing driver and install it but that didn't work. I can't find something at Dell who tells me how to install the drivers by default/applets. I got chk Dell for updates of pilot and analysis says that it does not work on something more old then XP but my OS is a Vista Home Premium so I don't understand that, I ran an another Mr. Fixit scan but it showed no problems. I suspect it is the applet which has stopped working and it gives a wrong signal that it is the driver that does not work when it is the applet which poses problem. Is there a scan which analyzes all aspects of the audio system and will repair or replace or at least give me a list of things that need to be replaced or updated? Any help would be appreciated I tried to solve this problem for the past two months and I really want to fix this now if possible.

  Hello

  Create a new user account and check if the problem persists, if the problem does not persist in the new user account, then you can fix the damaged user account.

  Create a user account (Windows Vista)

  Screw a damaged profile (Windows Vista)

  Good day!

• I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How can I solve th

  I did a backup of the computer on my old HD 110 GB. Install a new 500 GB HD and restore complete pc but windows onliy see the 100 GB on the C drive and the 9.99 on the D drive that were on my old HD and do not see the additional 400 GB. How I can solve this problem.

  Hi abgolf3,

  The question may be how the new hard drive has been formatted.  Take a look at the way in which the reader is implemented by clicking Start > Control Panel > Administrative Tools > double-click on computer management > double-click storage.  Is all the space on the disk are responsible?  If so, take a look at these two documents for your problem:

  Mark a partition as active

  Format a hard drive or partition to NTFS format

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  How to display the hidden files and folders even if I've already enabled "Show hidden files, folders and drives" to "Advanced settings"?

  After I enabled "Show hidden files, folders and drives" in 'Advanced settings', I can't yet see in the folder but I know there is a file in this program of WinRAR folder form as pictured below where I opened the case both at the same time.

  

  Hope you can help in this case...

  It would be possible that the file is marked as a system folder (which is just a check box in properties such as the hidden check box). So in your folder options, uncheck the "Hide protected operating system files" and see if it will be visible.

  Or another thing to try: remonter back a level, hold down SHIFT while you right-click the complete file and choose "Open command window here", then type DIR to see if the file is listed.

• How to download an application on the USB drive and install it then from there?

  I want to download an app from itunes store from a windows computer, save on the USB drive and then install on my iPad. Please gibve me a hint weather it is possible. Thank you!

  No, it isn't. Live or through iTunes only.