How to migrate essbase 6.1 version 11.1.1.1

Similar Questions

• How to migrate the relationship between two different epm versions.11.1.1.4 - 11.1.2.3

  Hello, we intend to make an hors-place upgrade to our 11.1.1.4 to 11.1.2.3 environment. The only thing stopping us is the question of how to migrate 11.1.2.3 11.1.1.4 reports. We have already considered the following options
  
  (1) LCM, LCM is taken in charge only between the same versions are at - it another way.
  
  (2) I know there is an option to export reports in the workspace, but the disadvantage that is that each report must be exported at the same time (atlease how it is in 11.1.1.4). And we have far too many reports to make them one at a time.
  
  (3) I have also considered the possibility of replicating data in the repository Directory (HYPERION_HOME\products\Foundation\workspace\data\RM1_Servername) of 11.1.1.4 to be used as the repository directory in the new version, assuming that reports and data analysis means the reports too. However after doing this I have connected to the new environment and could not see any of the reports.
  
  What other options are there to migrate the reports. Help, please.

  Teddd wrote:

  JohnGoodwin wrote:
  No need to delete tables as databases configured on the vesion as well, if you go to the bottom of the road upgrade data replication then select "Upgrade existing to the current version of 11.1.1.4 databases" when not to configure the database.

  Thanks for the reply of John, I looked at this option. But if I select this option if it does not affect the current 11.1.1.4 environment? Because it is an output level on the spot and we will be maintaining the old environment until we get the new environment to match the old. Thanks again.

  Clone the existing 11.1.1.4 databases, point to the clone.

  Documentation that should be studied - + "You can reuse the data and the existing database, or replicate the database and data to a new machine." +

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to migrate from Windows XP to Windows 7 non-destructively?

  How to migrate from Windows XP to Windows 7 to non-destructively?... meaning is there a way to do this without backup data (on the XP disk), the Windows 7 upgrade and then restore the XP backup data?

  Moreover, since the structures of folders (I am told are slightly different) XP and Windows 7 where can I restore the data from?

  for example where my Documents from XP to go on the side of Windows 7? and so on... there at - it a 'table of equivalence' for this?

  Thank you.

  The upgrade to Windows XP?

  Please read these instructions carefully and completely before you begin installing Windows 7: there are important steps that you must follow to upgrade your PC from Windows XP to Windows 7 in order to preserve your files and settings.

  Before you begin, you'll need to backup all your data to an external storage device, and you will need all the installation discs for the programs that you want to keep. Please make sure that you have an external hard drive (see details below).

  More detailed instructions are available at windows.microsoft.com/upgrade-windows-xp. Here are the basic steps.

  1. start Windows Upgrade Advisor (windows.microsoft.com/upgradeadvisor) to see if there are known issues that may affect the installation and the question of whether you should install the version of 32 or 64 bit Windows 7.

  2 back up your files and settings on an external hard drive using Windows Easy Transfer (windows.microsoft.com/windows-easy-transfer). If you do not have an external hard drive, you will not be able to use Windows Easy Transfer. Alternatively, you can copy the files you want to keep on a USB stick, CD or DVD.

  3. you will need to manually reinstall your programs, such as Microsoft Office, after I installed Windows 7. Gather the installation for your programs and all partner/license product key discs. You may be able to download programs from the Internet. For example, Windows Live Messenger can be installed from the download.live.com/messenger.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)."

  5. when Windows 7 is installed, use Windows Easy Transfer to restore your files and settings.

  If you are not comfortable Windows 7 installation, check with a local retail or the services of the PC company store to see if they offer upgrade services.

  http://www.notebooks.com/2009/10/13/WinXP-to-Win7/

• How to migrate my library of Photos (new application 2015) apple to Lightroom CC?

  How to migrate my library of Photos (new application 2015) apple to Lightroom CC?

  Photos for OSX is quite a new application, so there is no plug-in available or the details of a future version of LR that can support.

  If keep you your iPhoto library, you can use the plug-in integrated into LR CC, LR5 or LR6.

  If you export versions to the office or place duplicates in standard folders in the Finder, they understand any changes already made. You can then import into LR for the folder (s) using 'Add '.

• At LR5.7 and got LR6: how to migrate (not on the cloud)

  I bought the q of leica camera and it came with LR6.  I have LR5.7.  How can I migrate to the new version?

  If you have the installation files, then just install and activate it.

• How to migrate from jinitiator to sun jre

  Hello
  
  How to migrate from the initiator to the Sun re.
  My version of the Application of the BS is 11.5.10.2 with Oracle Linux 5.6 9.2.0.5 database version (32-bit, x), installation of single node.
  Access to the client for Windows 7 (64-bit) FORM.
  
  Thank you.

  user11952526 wrote:
  Hello

  Oracle E-Business Suite version 11.5.10.2 (11.5.10 CU2): what is average by CU2 ?

  Thank you.

  I'm sorry for the delay, I just saw this update on time
  Please see this
  11.5.10 oracle eBusiness Suite consolidated update 2 (CU2) [ID 316366.1]

  ;) AppsMasti :)
  sharing is caring

• How to migrate the production to the server in recovery planning disaster?

  We use planning 11.1.1.3 Oracle repository. Currently our name of the DR Planning Application is different from the production name and Windows of the DR server names are different from Production. Otherwise, any other configuration even.
  
  How to migrate production planning to the recovery server disaster? We stopped planning on DR server. Then we exported repository Oracle of production planning and it imported in DR Planning. We restarted Dr. DR planning planning seems to work very well, but I'm afraid to click on "Refresh planning" DR Planning - it can update the Production Server. So, how can I be sure that DR and Production planning are disconnected?
  Is there something we need to do? This method seems to be faster than the migration with LCM.
  
  Published by: Essbase Fan on October 18, 2010 10:11

  You must go about it the right way, if you migrate all planning an application, I agree that it is a safer and faster way.
  The essbase connection information is stored in the planning system database/schema, so as long as you have not migrated that then you should be good to refresh.
  To put your mind at rest, connect to the planning application and change the source of data associated with the application and then you will see where the essbase server is that it's going to update.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How to migrate the environment for environmental data?

  I implemented the ODI to load metadata from Dev to Test prod. What/how move you accounts formulated hyperion? Also, if I wanted to do a full extract (data and metadata) and to move between envrionments - as refreshing of Test with production data, is there a quick way to do it?
  
  We run Hyperion Planning 9.3.1.

  Hello

  OK, so you are talking about accounts that did not come through the ODI.

  In the version 9.3.1 your best way to migrate would be to migrate all of the planning/schema of database environments.
  So, basically, export the schema/database in your dev environment and then restaurant on your schema/database test data.
  This issue has been covered a lot in this forum, the latest being here > can I migrate 9.3.1 planning opposes 11.1.1.x Version?
  (this is to upgrade to a different version, but the concept of migration between the same version is substantially the same)

  If you have a reading up and have other questions then ask away.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• How can I transfer my new version of Keynote from my laptop to my iMac?

  Because I bought Keynote when I got a new MacBook Pro, I now have a newer version of the software (v 5.3) on my laptop that I do on my iMac, which has the version 3.02.  It is perhaps a really basic question, but how do I transfer this new version of Keynote on my iMac?  Thank you!

  Keynote 3 version only worked on non-intel Macs and the latest version of Mac OS, it is compatible is Tiger.

  That's why you need an Intel Mac under Snow Leopard or newer version running version 5.3

  You will need to run the Setup file of iWork 09, (it installs Keynote, Pages and numbers and all support files), there are problems when you copy simply on Keynote on its own rather than install correctly.

  It will ask you a serial number for verification.

• How can I get an older version of Pages where I can format pages face to face

  How can I get an older version of Pages where I can format pages face to face?

  If you have an older computer, the old version of the pages is still in the folder of iWorks if I'm not mistaken, otherwise, if you still have the iWork DVD you can reinstall it after you remove the crappy version of Pages.

  Otherwise... Maybe you can always buy some old DVD of it on the internet, don't know where you should look...

• How can I find out what version of firefox I use

  How can I find out what version of firefox I use

  https://support.Mozilla.org/en-us/KB/find-what-version-Firefox-you-are-using

  Left thread Firefox Android for Firefox section.

• How to return to a previous version of Firefox

  I hate the current version of Firefox and was much happier with the previous version. I fear I do not know what is the current version number and do not know what was the number of previous version, but as far as I know it was the last before this new version.

  How to return to the previous version, while keeping all of my addons and bookmarks? If I can get the previous version that I will definitely store them on my computer so I don't have to ask this question again.

  Best regards, Alex

  Hi, open the Manager (Ctrl + Shift + A) modules, select Extensions on the left side, and you should be able to disable or delete them from here.

• How to revert to the previous version. Last update makes the new windows appear less of a complete new window should appear.

  I have my system tell me when a new update is available. Happened today. I downloaded the latest update. My Firefox now sits at 38.0.1.

  I use no legs. I want a new separate window for all that I opened. Since the upgrade this morning... when I open a new window, it is fine. But when I click on something in that window when a new opens up and it doesn't seem to be an entirely new window. There is no tool bar and it doesn't seem to be a way to have displayed toolbars. So I have no control over this new window except to reduce to a minimum or nearby. That's all. It does not appear as a tab either.

  It sucks! This was?

  How to return to the previous version before upgrading this morning? Otherwise I'll have to find another application to use other than Firefox, because I don't like it at all.

  Thank you

  ksburrus

  Another solution is to modify some hidden settings related to windows dialog style. Should not you make changes to the way you use Firefox, but sometimes you need to enlarge some small pop-up windows that have been sized for a window with no toolbar displayed.

  Here are the steps:

  (1) in a new tab, type or paste Subject: config in the address bar and press ENTER. Click on the button promising to be careful.

  (2) in the search above the list box, type or paste feat and make a pause so that the list is filtered

  (3) for each preference that begins with dom.disable_window_open_feature. , if it is not 'true', double-click it to true.

  You may find that you prefer this anyway, given that sites can band is more these pop-up windows features.

• How can I find the installed version of Firefox?

  How can I find the installed version of Firefox?

  You run v33 right now. But you can still check two ways

  • Click on the

    

    button-> then the help icon (?) then on Firefox

  • Type of topic: in the address bar

• I 10.6.3 operating system.  How can I get the latest version of Itunes

  How you update to the latest version of Itunes when you only 10.6.3 operating system.  I have an IMAC bought in 2008 8.1.  I had to have a new

  hard drive installed and had to reload the old records, so I'm stuck to 10.6.3.  In the end, I want to load snow leopard, so that I can then update to the latest

  Maverick.  Thanks for any help you can give me.

  Basically, you need to update 10.6.8 via control panel software update from the system preferences or Apple's Support site, and then either download El Capitan from the Mac App Store or click the purchases tab and redownload a BONE you obtained previously.

  (142578)