How to mount the virtual folder of the ILO on ESXi 5.5

Similar Questions

• How to mount the iso image on the ESXi Tech support console

  Hi friend

  How to mount the iso image on the ESXi Tech support console?

  I run the sub command and it failed.

  # mount o loop-t iso9660 vmware-esx-drivers-net-be2net_400.2.102.440.0-1vmw.2.17.249663.292682.iso / free

  editing: vmware-esx-drivers-net-be2net_400.2.102.440.0-1vmw.2.17.249663.292682.iso mounting on / open failed: no such device

  ESXi does not provide the option of mounting ISOs. You try to install the driver the driver Async package be2net / ISO. Follow the steps below

  (1) install VCLI
  (2) mount the ISO on the host where you installed vcli
  (3) use vihostupdate to install the driver
  vihostupdate-i b - servername
  He will ask for username and password of your host.

  Thank you
  Nithin

• How to restore the once installed ESXi patches

  How to restore the once installed ESXi patches

  If you have already updated, restore to the latest version:

  1. Restart the ESXi host
  2. Loading at startup the hypervisor progress bar, press SHIFT+R.
  3. The following warning is displayed: current hypervisor will be permanently replaced
     with the construction: XXXXXX - x.x.x. are you sure? [Y/n]
  4. Press SHIFT+is to roll back the build
  5. Press Enter to start

  @

• How to check the NUMA on ESXi host node

  Dear team,

  I have cisco ucs Server Blade configuration below b - 200 m3. I want to know how to check the NUMA on ESXi host node.

  RAM: 192

  Socket 2 (8 cores).

  concerning

  Mr. VMware

  Unfortunately, it seems THAT NUMA is disabled hardware wise. You can only activate it via the BIOS setting.

• How to get the license to esxi 4.1 will be accepted on newly reinstalled host (OEM HP Proliant)

  I just spent the day of two failed disks in two tables on an old HP proliant ml350 g5

  It seems that it has been deployed with HP installed esxi 3.x (based on the packaging of HP where the USB was) and later put upgraded to 4.1.  It is a very low installation - the esxi is running stand-alone.

  As part of the recovery process the berries, I deleted (accidentally) the USB in the box that hosts the esxi installation.  So I took out the CD and HP instead of the brand HP esxi 3.x (like on the box label), there was a serious esxi 4.1-labelled CD (which corresponded to which will be executed on the box before the problem).  I therefore installed from the CD, got all VM rerun, ghettoVCB (re) - on-demand via crontab and then to apply the license.

  The box of HP brand has a certificate (with bar code) showing that I have "permission to use" esxi, but no key.  4.1 key I used elsewhere is not accepted in the dialogue to "transfer license".

  -Where am I going to solve this problem?  Do I need a key for HP? If so, what should I go for?  My experience with HP for something like this are less favourable one that treats the monopoly of electricity, so any help would be appreciated.

  Thanks in advance!

  This link from HP

  HP Integrated VMware ESXi 4.0 and updates Start Guide to 190 KB

  ... Upgrade to a license (page 7... such as ESXivirtualization software.) Hosts provide processor... solution without the need for separate external... the right key when you are prompted to...

  Last updated: April 15, 2010
  (aka http://tinyurl.com/ma9m7kz) is a pdf file that brings me to the vmware website, which, when I log in, shows me my license key 4.1 esxi - which is not accepted by the process of "transfer license".
  So in desperation I decided to type it in again, after a good night sleep and PRESTO, it worked.
  Which is weird, because yesterday I was cut and paste from the website - and paste it into Notepad first to remove any characters dog wandering or unacceptable, and someone had read back to me.
  Thanks for the help!
  
  

• Make access to the ILO in ESXi 4.0

  I have ILO GHP 360 G6 server just fine and configured it. Installed ESXi 4 U1.

  I don't see Ctrl F8 option more when ESXi starts... How can I get ILO?

  This isn't a question of ESX.

  You might accidentally disabled the ILO ROM-based setup utility.

  Take a look at F8 missing ILO on how to reactivate.

  André

• How to mount the afp share with two different users

  I use Terminal to mount three actions of my SIN.  I want to mount a mount point in my user folder.  One of the actions has a user name and password, so that the other two mount as a guest.  I can ride through Finder > to connect to the server without any problem, but this goes to /Volumes and not in my user folder and also indicates the actions on my desk.  I use to get the following:

  mount_afp o nobrowse 'afp://username:password@Servername/Share1' ~/Mount point/folder 1 /.

  This example goes up the part properly, but when I run the following command:

  mount_afp o nobrowse 'afp://Servername/Share2/' ~/Mount point/folder 2 /.

  I have the following error:

  mount_afp: AFPMountURL returned error-5023, errno is-5023

  This happens if I invert the controls as well, for example to get the comments share first, then the part of the user.

  Am I missing something?  I can't get different actions for different credentials?

  OS X has no Linux - bind option that allows multiple points of Assembly of nickname for the same file system.

  OS X allows a file system mounted only once.

  I suggest you get the file normally, system create an OS X Alias, can put copies of this Alias in the account of each use.

  And/or create symbolic links that point to the real mount point.

• How to mount the SD card into the PC?

  I just got an Xperia S tablet a few days ago. I found when I connect the tablet to the PC via USB, internal memory only present in computer science, not the sd card. My question is if there is a way I can access SD card via PC? It is runing 4.0.3 release 5.

  Hello
  Thank you for your message.
  You cannot transfer your PC directly on the SD card, but you can transfer to internal storage as you mentioned, and then move the file to the SD card in the tablet.

  Follow these instructions to transfer the internal storage to a SD card as follows:
  How the backup files or the transfer of the tablet on a SD card. [/ url: 5znuzjdg]
  This can also be found...

• How to mount the Oracle 11 g on Vmware software.

  Hi all
  
  I'm new to this forum and I'm also learning the Oracle DBA 11 G on my own to improve my skills and move further.
  
  I have a question for which I'm looking for an answer from the experts here in this forum.
  
  Question: I have installed Vmware and 4 Linux on my system, please tell us how can I now install Oracle 11 G software so that I can start with the creation of database?
  
  Please respond to my query that my interest in the subject remains intact and I can get a good start in it.
  
  Thanks in advance.
  
  Heyat alya.

  You will need Linux 4 Update 7 or superior - installation steps are documented

  http://docs.Oracle.com/CD/E11882_01/install.112/e24321/pre_install.htm#CIHFICFD

  HTH
  Srini

• How to view the vswitch on ESXI 6.0 mac address table?

  Hello!

  Is there any medium vswitch to view for all (or special) mac address table CLI?

  It is very useful in troubleshooting scenarios, but I can't find how to do it.

  Thanks in advance!

  ESXi virtual switches are not manageable switches.

  You can query to switch using the vSphere API, see this - http://www.virtuallyghetto.com/2011/05/how-to-query-for-macs-on-internal.html

  Thank you

  Hentzien

  Virtual Admin

• How to change the ucs for esxi 5.1 hba queue depth

  Hello

  How can I change the depth of the queue for a host in 5.1 for ucs b200 esxi?

  In esxi

  I type esxcli system module settings - list m

  It shows

  ~ the list of parameters of module system # esxcli fnic m
  Value of Type name description
  -----------------------  ----  -----  -------------------------------------------------------------------------
  uint fnic_fc_trace_max_pages Total allocated pages of memory for the buffer of trace fc
  uint fnic_max_qdepth depth of queue in the report for each LUN
  uint fnic_trace_max_pages Total allocated pages of memory for the buffer of trace fnic
  initial heap_initial int heap size allocated for the pilot.
  heap_max int maximum size of the available heap for the driver.
  the pool of skb_mpool_initial int size drive minimum private socket buffer memory.
  skb_mpool_max int size maximum achievable private socket buffer memory pool for the driver.
   
  How can I change it and what is the depth of queue recommended?

  Was taken before, see for example

  https://supportforums.Cisco.com/discussion/12215126/queue-depth-executio...

  https://supportforums.Cisco.com/discussion/11744776/UCS-HBA-queue-depth-...

• How to reset the configuration on esxi 5.1 which hangs at startup?

  Hi, I have a lab at home where I have an ESXi 5.1.0 host configured to turn on a virtual machine at startup of the host. The host starts and I'll see the DCUI for a few seconds before getting a purple screen crash. This started after I set up a virtual machine to use the pass through peripheral PCI. I found 2039030 which explains this bug KB. There is a patch, but as much as I know I can't apply it because the host crashes. Now, I'm a bit of a newb and was looking for ways to reset the configuration to prevent switch off when the host starts the virtual machine. I can't find a way to make this change. I tried the recovery of hypervisor mode during startup (Maj (R) but I get a warning saying there is no other hypervisors for restore. So is there a way I can either apply the hotfix to a host offline esxi (starting with a knoppix USB) or change a configuration so that vm does not automatically turn on, or if necessary just reset the entire configuration (again, by booting to a usb key)? Thank you!

  Probably the best way to reset the configuration in this case is to re - install ESXi. Make sure that you select "Install ESXi, VMFS datastore preserve" and - once installed and configured - register the virtual machine to inventory in click with the right button on their .vmx files in the data store Navigator.

  André

• How to shrink the VMDK on ESXi

  I need to reduce a virtual machine that is running on a server ESXi.  Is this possible?

  The easiest way would be to use the VM V2V conversion tool and resize the disk during the conversion.

• How to disable the swap in ESXi?

  Hello

  I have an ESXi4 host that has a 8 GB memory and it runs 2 VMs, each with 3 GB of memory.

  Disk space on the host only has 4 GB, so I have to disable swap as there is not enough disk space on the host computer.

  How could I get this?

  I see when I go on the 'Resources' tab and click on the VM and edit resources, there is the section of memory resources.

  What should I do here?

  Here are the current settings:

  Actions: Normal, 30720

  Booking: all the way to the left, 0 MB

  Limit: all the way to the right, 6136 MB

  Unlimited: checked

  Yes - the swap file size is allocated memory less reserve memory.

• How to determine the version of ESXi

  Question:

  My vSphere client shows the ESXi host and 5.0.0 - < build number > - standard. If it's version, "U1" would be the U1 identifier in the summary, Image profile window general tab: value?

  I can very well be just looking at the answer but need a boost.

  Thanks, Patrick

  The following article has correlated the version numbers version ESX (i):

  Correlation of vCenter Server and ESX ESXi host version numbers for update levels (1014508)