How to move an exchange server to another server on a different domain (trusted domains)

Similar Questions

• How to move a virtual machine to another store of data on the same host

  Hello

  I have a single ESX4 host with 3 data warehouses and I need to move a virtual machine to another data store, how can I do that since I don't have the ability to migrate the virtual machine when I am connected directly to the client with vSphere host and I do not have a server vCenter also?

  Thanks, Julien

  Hello

  Yes, you can use #vmkfstools-i /vmfs/volumes/datastore/VM/VM.vmdk /vmfs/volumes/datastore/VM1/VM1.vmdk

  For the record, the data store must be shared if you copy of VM and VM must be turned off. In the above command you copy VM.vmdk to VM1.vmdk and add the newly created with this existing VMDK VM.

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• What is MS Exchange Server & how Mdeamon running on exchange server

  can someone tell me about microsoft exchange server, how it is different from the other other software srver window svr etc.

  and how software mdeamon running on the exchange server or is it also works on the other server...

  There is a specific forum dedicated to the problems of Microsoft Exchange.
  Please post your question in the forum below for additional information and assistance.
  http://social.technet.Microsoft.com/forums/en-us/exchangesvrgeneral/threads

  Sincerely,

  Marilyn

• If you use vista, how to move from one account to another windows messaging?

  My set cable company in place for e-mail accounts.  One for my wife and one for me.  My wifes account is the default value.  How to switch from one account to another?

  I searched through default settings, account information, etc. anything. I believe that under XP, you could choose an account or another.

  OE has the option of identities, Winmail opener does not work. Unless you have separate Windows logons, you use the same instance of WinMail and share the same Inbox, unless you create another and divert the mail with message rules. The only "switch" you have at the moment is when you compose a new message, there is an arrow down to the right of the field to choose the account, the message will be.

• How to move a contract (EULA) to another computer

  To save a dying computer my software, I want to use a disk imaging program, but the Windows operating system will know it's on another box. The manufacturer of the imaging software disc confirms that this will be a problem. How can I get permission to spend my EULA license (and instructions for how this)? I need to a PHONE or ADDRESS e-mail to Microsoft WHO to contact specifically. Poking around the site of this great company, I was unable to find one.

  "tahd Petun" wrote in message News: 8ee8d0f8-699a-45ce-a56f-2e786555eb8a...

  Ouch! I'm completely out of luck? The XP I came preinstalled. Although no key label is affixed to the box, I found the key ID and product using an application called KeyFinder CD, if that helps. I also have another copy of XP, "Shrink Wrap", with my own label key. However, it is my understanding that if I installed XP on the new computer, and then copy the disk image, the disk image will overwrite the XP I just installed. If I copy the disc image on it first, and then install my XP "Shrink Wrap" after that, I just replace the disk image, right? Is there no way out of this catch-22? Microsoft has to be a way to solve this problem? The EULA indicates explicitly that I have the right to move from XP to another PC. But I can't find any way to contact Microsoft about how to proceed, if there is indeed a way.

  The issue here is not just avoiding grief to reinstall everything. I have backups of my data and new versions of the software that I lost the CD for, or are more supported, or for which the original CD is no longer install - company bought by a 3rd party, etc.). But the available versions of these 3 products (Visual FoxPro, Protools and Vegas Video) refused to install on a XP box, I recently bought (not all at the same time, either in a case, not at all). After several days of trying with the help of their forums, personal support tech and Geek Squad (who could find nothing wrong with the new PC itself), I returned the PC to the seller. Just maybe, it was a hardware problem with this (refurbished) PC? But I'm afraid of thinking to buy yet another and passing through the same agony.

  Earlier versions of the 3 products, all of which are still working happily on the old PC and they make what I need if I could simply move elsewhere. The old PC is no longer prints Burns is no longer CD, often refuses to close, sometimes loses the ability to cut and paste and sometimes Windows Media Player runs faster than the normal speed. Even if all these questions are related to the software (corrupted XP?), this PC lived 4 years of constant use and will soon die, no matter what I do...

  OEM Licenses cannot be moved to a new computer.
  In your situation, however there may be a workaround solution, if your XP "Shrink Wrap" is of the same one (Home or Pro) OEM edition.
  If to make Imaging correctly, the system will want to reinstall anyway, as the HAL is very likely to be compatible.
  You must create a disk for SP3 slipstreamed using XP "Shrink Wrap" and then use it and install his key for repair.
  Work done :)
   
  If the system does not need a repair installation - then use the product update tool key to change the key to "Shrink Wrap" (after the move!)
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• How to move a virtual machine to another host ESXi running when HA vCenter is not operational... !

  Hey

  We have a few guests of ESXi running the 5.0.0 original version and some running the latest 5.1 U1 or whatever and the last vCenter to do this too.

  the vCenter server is one of the hosts running 5.0.0 and these do not allow HA either active correctly. The problem is a known bug, and you switch to maintenance mode and do funky stuff on the cli to make it work. However, I just want to spend all my virtual machines off the old 5.0.0. hosts and on the new, as the 'old' will be dismantled. I can do all virtual machines by just when close them down and moving off, but I won't be able to do this in with the vm off vCenter vCenter!

  can I turn off, connect directly to the ESXi host, remove it its inventory (this option exists even on the ESXi host live?) and save it to the new 5.1.0 host U1 and fire?

  vCenter complain or fail when she returns to the top?

  they share all the same warehouses of data, so I need to move the backend.

  thoughts?

  Thank you

  Roger

  HA and vMotion (i.e. live migration) are two different things and are independent of each other, so if vMotion is configured correctly, you should be able to migrate the virtual machines (including the vCenter Server VM) to another host.

  André

• How to move a repleatating picture in another frame of repleatating

  I have two repleatating framework and I placed the separately.
  Now, I want to make one as a Parent.
  I drag a RF and try to move it to a different RF, but it does not work.
  Could you please tell me how can I make one of these RF as Parent and another child?
  
  Concerning

  user576726 wrote:
  I have two repleatating framework and I placed the separately.
  Now, I want to make one as a Parent.
  I drag a RF and try to move it to a different RF, but it does not work.
  Could you please tell me how can I make one of these RF as Parent and another child?

  Concerning

  Hello

  1 make sure confine Mode (icon representing a key is locked)
  2. Select the child frame and cut
  3. Select the image of the mother and paste (make sure that your child is less size (width & height) than parent frame.)

  This will solve your problem

  Maury

• How to move one Web Service to another machine.

  I was reading a book on SOA. In describing the concept of coupling low he said
  
  Web services, however, are "loosely coupled." A piece of software that have already
  exposed as a web service, it is relatively simple to move it to another computer. Why
  is it? It is simple Web services "non-couple" and "decouple" because these services
  Summary of the functionality of the software interface. Once software is
  available as a web service, it is available through SOAP in a variety of ways, including
  Protocols of the Internet.
  
  can someone explain this?

  When you have a web service that is consumed by SOAP over HTTP protocol, of course it would be to have a WSDL that are associated with. So all consumers are interested is the WSDL and the interface provided by the service. So, here in this example, for the new service what service replaced mainframe, also a long time that its end URI and the interface of the service are maintained, consumers is unclear, because the new service also provides the same functionality can be and also for sure the same interface defined as one.

  Hope this helps,
  N

• How to move from one page to another page

  Hi all
  
  We have a report, in that if I click on the username to go to another page,
  in this page, I created a guest and a single report, he must select groups (prompt) and this page only to see the report
  
  How to provide as page, when the user clicks on user_name in the report (can make us on navigation option in the column property?)
  
  
  Thank you

  scope and everything later, but why you want to use variable presentation only?

  We can make this column is invited in the target report and pass right?

• USB-6008 how to move an executable file to another computer.

  Hello Forums NOR!  Please bear with me as I'm new to products OR as well as this forum.  Hope I have write in good advice.  I'm an electronics technician with over 30 years of experience in a variety of hardware and software that is trying to move an executable file from an old computer to Windows XP on a new computer Win 8.

  First of all, I just moved the file .exe itself.   When it is run, it produces an error dialog box: "Unable to locate the LabVIEW run-time engine" "this executable requires a 2011 version (or compatible) LabVIEW Run - Time Engine."

  Then I ran the installation disc driver supplied with the USB-6008 module.  Now, the executable will start but it does not seem to connect with the USB-6008, because it does not have the digital I/o.

  I can run NI MAX and see the USB module as well as test the analog and the digital I/o so I know the hardware works.

  I've been surfing on the knowledge base and found references to .dll & .vi type support files, but have no idea of which ones to get and where they might be.

  This is possible without having to recompile the exe file?  I have no access to the source files.

  Thank you!

  
  

• How to move the ESXi server in a data center

  Hello

  I'm new to VMware so I hope someone can help me with this small request! Currently in our environment, we have two ESXi servers (both with several virtual machines) and we would like to add to vCenter.  vCenter is configured, acting as a license server & when attempting to add a host to the data center, we get the following message "there is not enough licenses installed to run the operation. Is it possible to add an ESXi server to vCenter?

  Thanks in advance,

  Peter

  Of http://www.vmware.com/products/esxi/uses.html

  "In addition, manage a VMware ESXi with VMware vCenter Server host requires a VMware vCenter Server Agent for each host, available only with the purchase of a VMware Infrastructure license (Foundation, Standard, or Enterprise)."

• How to move a program installed on another hard drive?

  My C: drive is full, and I need more space. Is it possible to reinstall programs on the C: drive in the D: drive?

  Hello

  There is no such programs available from Microsoft, you may need to use a third party program to perform these actions. However, you are going to run these programs on your own risk and you can back up your data before do you.

  NOTE: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk

  Hope the helps of information.

• Configure Exchange server to allow the transfer of mail of the AS / 400

  I need to configure my exchange server except my AS - 400 email, how to configure the exchange server

  Hello PercyParker,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Exchange Server and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

  Best regards

  Matthew_Ha

• How Transport rules Exchange Server 2010 takes immediately?

  Hey guys, I meet a riddle in my daily work.

  It's rules of transport in exchange server 2010.

  I made a few rules in use. Rule A for DynamicDistributionGroup A and article B for DynamicDistributionGroup B.

  Obviously, the two DynamicDistributionGroups are the corresponding OUs. OR A and B OU in Active Directory.

  Now I move user C OR B OR A. I thought that user C will use the B rule immediately, but I'm wrong.  He uses the rule until I restart

  the mail server.

  So here's my question: How does Exchange Server 2010 Transport rules take immediately?

  Hello

  Your Question is beyond the scope of this community.

  Kindly forward your Question in the TechNet Forums of Exchange Server.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  See you soon.

• How do I remove, rename, or move files or folders in another program, that I can't find?

  Im running Windows 7 Ultimate edition. What should I do to solve this problem: too often, when I try to delete, rename or move a file/s or folder/s so on my desktop, documents, library, or anywhere with a typical, it should create a custom folder, I get an error message telling me that I can not remove this file or folder because it is open in another program. It drives me crazy because I don't know what the heck, or when the devil this folder doesn't exist anywhere else on my laptop. I tried to look for programs and files to determine if there are duplicate areas where the file can share with another path, but nothing. I also looked at the properties of the file/folder, but it does show me nothing relevant, even if I uncheck the read-only box. I am the only user/administrator of my laptop. I created a profile of the privileged administrator I use only, nothing else. I run a home network with 5 computers and treat various problems in the past, but this problem started recently, after I upgraded my network of Windstream modem 4220 + linksys wrt600n to Windstream wireless all-in-one router. The new router was a piece of * so I've not unhooked it and reiinstalled my original Windstream modem 4220 + linksys wrt600n devices. I had a few problems, but everything is now back to how it was. I can only think that this may have something to do with the share on the network? Correct me if I'm wrong (please), but there seems to be too many titles listed under users? It's whats listed under users: administrator, Classic .NET AppPool, default, default AppPool, (my username) and Public. In any case, please help % @#! I think I may be fubar had my network configuration after uninstallation and reinstallation of the windstream (local phone/internet provider) facilities and added a printer wireless capability (which does not). and may have caused the problem that I can't delete, rename or move files or folders in another program, that I can't find? If yes or else, HELP!

  When you have the problem that happens, open the Task Manager.
  Then, you can view the processes that are open and see if the program or file is open by another process. If so, then select end task.
  Then return to Windows Explorer and see if you can remove the file now.

  You may also be able to delete the file in Mode without failure.
  To access Safe Mode:
  (a) restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  (b) select an option when the Windows Advanced Options menu appears, and press ENTER.
  (c) when the boot menu appears again, and the words "Safe Mode" appear in blue at the bottom, select the installation that you want to start, and then press ENTER.

  If you run a Web server, you can see the AppPool under users.

  An application pool is a group of one or more URLS served by a worker process or a set of worker processes. Application pools define limits for the applications they contain, which means that all the applications that are running outside of a given application pool does not affect applications in the application pool.

  Hope this has helped answer your questions.

  Thank you!