How Transport rules Exchange Server 2010 takes immediately?

Similar Questions

• How to install Exchange Server 2010 with Transcoding Service in Windows 2008 R2

  Please get back to me as soon as possible.

  Due to the scope of your question, it would be better repost you on dedicated Exchange 2010 forum located on TechNet:

  Exchange Server 2010 forum - Microsoft Corporation: software...

• Can I remove asp dot net 2.0 on an exchange server 2010

  I have a client with an exchange server 2010, and they are required to have a completed quarterly PCI scan. Last quarter of what they narrowly but this time around the issue needs to be resolved.

  90780 - Microsoft ASP.NETValidateRequest filters bypass the Cross-Site Scripting VulnerabilityCVE-2008-3842, CVE-2008-3843

  Comment by ASV:

  There is no fix available for now; Please consider implementingmitigating controls (firewall, traffic filtering, etc.) to answer these questions. For

  specific information about how to restore these questions please consult the technical report below.

  I thought that if I unregister the net 2.0 from the owa site would correct this problem.

  In the point only remove net 4.0 is installed.   When I browse the C:\Windows\Microsoft.NET\Framework\ I see

  14/06/2011 16:32

  v1.0.3705

  2009-07-13 23:20

  v1.1.4322

  27/06/2012 12:26

  v2.0.50727

  14/06/2011 14:32

  v3.0

  14/06/2011 16:32

  v3.5

  19/08/2012-13:30

  v4.0.30319

  In IIS

  Default Web site, aspnet_client, system_web 2_0_50727 & 4.0.30319 reside here with nothing in the files when viewed.

  There is no server expert here, this is a user forum.  Check out the TechNet forums, this is where you find people from server.

• Exchange Server 2010 - Unable to download POP3 mail

  Using Exchange Server 2010 and configured POP3. When you use Outlook express POP3 to download mail

  I get error "Message number 1 could not be found. "Account: XXXXXXXXX server: 192.168.1.13 protocol POP3, server response: 'ERR Server Unavailable 21', port 110, secure (SSL): no, server 0x800CCC90, error number error: 0x800420CD.
  Checked the scale in the Advanced tab "this server requires a secure SSL connection."

  ASK THE QUESTION IN THE EXHANGE SERVER FORUMS:
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer/

• How to send emails to the MS Exchange Server 2010 distribution group?

  Well, I'm not well versed in Exchange, (that I'm learning) so please forgive me for the lack of details correct / lingo.

  I try to create email for my church, distribution groups.
  We must be able to send a single email to a group and do it before out to all members of this group.
  For example: if I send an email to * address email is removed from the privacy * ", the email needs to go to each (even personal) email address that is in the distribution group"deacons".

  So far, I can do where ONLY the people on the network of the Church can send to distribution groups, and then ONLY the emails that are created from the Church network can receive them.

  Obviously, there is some progress, but I'm just at a loss on how to 'open' of this group until the 'general public'.

  I need to have server-based distribution groups and NOT people's individual e-mail / accounts Outlook, because the Congregation members need to be able to send messages to these emails as well. I can't create individual distribution to 1000 prospects people groups.

  Any help would be spectacular.

  Post in the Forums of Exchange Server:
  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=exchangeserve

• Windows Server 2008 standard R2 with Exchange server 2010

  Hello

  I have an old server that has been removed from the network that it was used for active domains (domain controller) and emails,

  A new server (Windows Server 2012) took his place with a new address ip and domain name for every pc.

  I would like to return the 2008 server in the network so I can continue to use exchange as your e-mail server server.

  How to 'reset' the server so I can put in the new network, using the new domain controller and damain network and have the old server as the e-mail server.

  Does anyone have instructions step by step on how to do it, or can give me a link on how to do it.

  Thank you.

  Hello

  Support for Windows Server/Exchange Server is not provided in these forums. On the other hand, it please repost your question in the relevant Microsoft TechNet forum here:

  http://social.technet.microsoft.com/Forums/en-us/category/windowsserver .

  or, possibly,.

  http://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Thank you.      :)

• How to install SharePoint server 2010 on windows Vista 32 bit?

  I want to work with SharePoint designer 2010 for web development and have need of SharePoint server 2010 to work with her. I find different articles on the Microsoft web site to install the required components, but most of them including Shell 2. So I was wondering if it is possible to install SharePoint Server on Vista 32. If so you could advise me how to?

  Thank you

  Hello

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the MSDN Forum. You can follow the link to your question:
  http://social.msdn.Microsoft.com/forums/en-us/sharepointgeneral/threads

• Error in Microsoft Exchange Server 2010

  Greetings,

  We are facing problems that are not too familiar. Our problem happened after installing Symantec Endpoint Protection in the server that is running Microsoft SBS 2011 with MS Exchange 2010. Thus, our clients are not able to send or receive emails.

  Here is the error we have obtained:

  

  The general message with error: Exchange Search Indexer has temporarily disabled indexing of the database of mailboxes Mailbox Database (GUID = b9999002-bde3-4ca6-8a96-799d0f4b7482) due to an error. Cannot read events. 0x80004005, ec = 1142)

  In addition, our certificates of exchange for email under the self-signed signature parameter is changed to FALSE instead of TRUE. We believe that Symantec inadvertently change and block configuration. As a result, our customers cannot send or receive e-mails in internal or external. Anyone can us enlightened on how to renew certificates?

  Any help is appreciate this issue! The fix would not simple?

  Thanks for your time!

  Hello

  Your question is beyond the scope of this community.

  I suggest that repost you your Question in Exchange for TechNet Forums.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  Or here:

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?Forum=exchangesvrgeneral

  Or:

  SBS forums.

  https://social.technet.Microsoft.com/forums/en-us/home?Forum=smallbusinessserver

  "Windows Small Business Server 2011 Essentials online help"

  https://msdn.Microsoft.com/en-us/library/home-client.aspx

  See you soon.

• Installation KB979744 causes Setup of Exchange Server 2010 to stop working

  I'm installing Exchange 2010 on a new instance of Windows Server 2008 x 64. Exchange Setup requires install several patches. After you install the 979744 hotfix, the Exchange Setup program fails with a fatal error. Remove the patch allows the installer to run, but Exchange says that this hotfix must be installed in order to continue.

  SOLUTION!

  I don't really know the root of the problem, unfortunately, but I don't know how to fix it.

  2 options:

  Option (not recommended) 1: uninstall all the installed except windows 2008 server sp2 service packs and install only what is to be the installation of exchange. Be sure to turn off the automatic updates temporarily. What either updated clashed against kb979744 won't be there either, and everything will work

  Option 2: Reinstall windows 2008 server sp2: and then turn off the automatic updates, install only what is to be the installation of exchange. The installation should work without any problem

  CAUSE: we installed all service packs from Microsoft including .net 2.0 sp2 and then we tried to install exchange 2010 sp1 and it flies well. Because now I guess it is recommended to install exchange first of all with its required updates, then later, I'll consult with microsoft if it's ok to install windows from the site updates. If microsoft confirms if all goes well, then we can proceed.

  Javier

• How can I restore and old information store (Exchange 2003) to my Exchange Server existing (Exchange 2010)

  Nice day

  3 months ago I installed Exchange Server 2010, now I need to recover a mailbox from a backup. The backup was performed while he was still Exchange 2003. I want to know is you can restore an old Exchange 2003 database in the Exchange 2010 recovery store, and if so what is the way forward. PS I use symantec backup exec 2010 R3 as backup software.

  If it is not possible, is there any other way to retrieve mailbox information

  Any help will be much appreciated.

  Hello Wh@pd@p,

  I suggest posting your question on our forums TechNet for Microsoft Exchange Server, located here again:
  http://social.technet.Microsoft.com/forums/en-us/category/ExchangeServer

• We have 2010 550 5.7.1 exchange server client has no prmission to send that sender I get this error on Exchange pop3 accounts and account owa works fine

  Helloo...

  I have exchange server 2010 my all work fine, but since last week, my two not able to send mail to another domain I get customer error 550 5.7.1 doesn't have permission to send that sender ot 550 5.7.1 Unable to relay.

  I'm trying to make new Email id this two days well only after two days work I get to new same error.

  Thank you
  Ashok pal

  Hello

  Since you are facing problem with Exchnage Server 2010, it would be preferable to send the same in the Technet community for more help.

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  Hope the information is useful

• Conversion of MS Exchange Server disk from IDE to SCSI blue screens

  Nice day

  We are running a Microsoft Exchange Server 2010 on a virtual machine in Windows Server 2008 R2 Standard Edition on VMWare vSphere 5.1.0 with the following discs:

  1 C: / Capacity 50 GB space free 22.5 GB (OS)

  2 E: / 600 GB capacity, free 291 (Exchange database) GB space

  3 F: / 360 GB capacity, space free 146 GB (Log files)

  All of these disks are IDE and try to change in SCSI, we made a clone of Exchange running and to turn the server works smoothly, then IDE.

  Because the Exchange running is still active, the clone is assigned an IP address outside of the vlan operational and is able to start and to flow normally, although some services, requiring probably the DNS do not start.

  To work towards a smooth conversion, we changed all the Services of MS Exchange Server in manual start mode and followed the guidelines that provide by the link: VMware KB: conversion of a virtual IDE disk to a virtual SCSI disk

  The same steps had previously worked for our virtual machine running Sage ACCPAC, but for the Exchange, immediately after changing SCSI drives and the switching on of the machine it blue screens and returns the message that we run a startup repair or start Windows normally.

  As there is just no image to us for this and Windows starting is normally on the screen even in failed attempts to run a startup repair.

  Anyone who has managed to convert a disk Server MS Exchange VM to IDE SCSI, kindly help what to do even if with off the server always returns the same error messages.

  Assuming that the manual conversion is ok and the virtual controller selected to add the LSI Logic SAS as mentioned by tomtom901, you may still be missing appropriate drivers in Windows. In order to inject the required driver, or temporarily add another disk virtual SCSI connected to a controller LSI Logic SAS before changing records virtual or secret the data first disks, make sure the VM powers on and load the drivers and then convert the drive system in a second step.

  André

  PS: I removed your duplicate post in the forum of converter. Hope that's ok with you?

  Post edited by: a.p..

• Can ColdFusion 10 connects to Exchange Server 2013?

  There are a lot of forums and chats on 10 ColdFusion connection to Exchange Server 2010. Anyone know if 10 ColdFusion can connect to Exchange Server 2013. If you don't know, what are the steps? I tried all the stuff used in ColdFusion 10 connection to Exchange Server 2010 and still not connect to Exchange Server 2013.

  Found a solution. Yes, you can connect 10 ColdFusion to Exchange Server 2013 but there is a slight twist to the solution if you want to use the features of cfexchangeXXXXX.

  1. ensure to that you have imported the certificate Exchange Server 2013 into 10 ColdFusion server.

  2. in the cfexchangeconnection call, add:

  ServerVersion = "2010".

  Protocol = 'https'

  formbasedauthentication = 'TRUE '.

  formbasedauthenticationURL = "XXXXXX".

  If serverversion is missing, it will default to Server 2007.

• Anyone know how to get a license for Exchange Server 2007?

  Exchange Server on Windows Server 2008

  Hello

  Does anyone know how to get a license for Exchange Server 2007. I've been on the Microsoft Web site, and it is only showing Exchange 2010.

  Thank you

  Hello R McMullen,

  The Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you

• How can I migrate my emails to an exchange server.

  I have my email accounts hosted by godaddy and I want to migrate everyone to Exchange Server. How can I do this?

  Hello

  Your Question is beyond the scope of this community.

  Kindly forward your Question in the TechNet Forums of Exchange Server.

  https://social.technet.Microsoft.com/forums/Exchange/en-us/home?category=ExchangeServer

  See you soon.