How to multisim 11 files (.ms11) work in labview

Similar Questions

• How to convert the file with VI for LabView .lib to CVI?

  Hello

  I have the .lib file for my lock in the amplifier. The lib file is written for labView and already contains a visual interface (like ActiveX). The point is that I need this file for programming in CVI (8.5). How can I convert a LabView ICB .lib?

  Thank you.

  Denis.

  You said that you had a .lib file and in fact you have an llb file. There is a huge difference between an "i" (eye) and a 'l' (ell).

  There is a LabVIEW Instrument Driver Export Wizard but it's only for new pilots of project lifestyle and you need LabVIEW. There is no other way to convert a LabVIEW driver to a driver of the CVI. If the LabVIEW driver uses methods and properties of the ActiveX, you will need to write the same thing in CVI.

• How to transfer a file 'Microsoft works' of 'my documents' on a cd in D drive?

  It is for hard drive backup

  Are you asking how to burn a CD? You have a CD/DVD burner installed? If Yes, do you have third-party burning software installed (Roxio, Nero, Sonic, etc) or you want to use the windows built-in burning capability to burn a CD?

  If the latter, see:

  http://support.Microsoft.com/kb/279157

  If you mean something else, please specify if I can help you. MS - MVP - Elephant Boy computers - don't panic!

• How to get a file created by windows labview to work on a mac

  I try to open a data acquisition simple vi which was written in Labview 2009 for Windows, using the USB 6211 material. I installed Labview 2010 for Mac OS X (full) with NIDAQMX-Basic for Mac. The problem is that none of the sub - vi DAQMX opens correctly. I think it's because they have different names, for example in windows labview "DAQmx create Channel ' becomes 'DAQMXbase create a channel' or something like that. What is the problem? Installed the wrong DAQMX for Mac OS X?

  Hello oilyfingers,

  As other users have posted, DAQmx Base and DAQmx are two different drivers.  It is recommended that Windows users install DAQmx on their PC.  However, a version of DAQmx Base also exists for the Windows environment.  Your VI is expected to require fewer changes after installing this driver.

  NEITHER DAQmx Base 3.4: http://joule.ni.com/nidu/cds/view/p/id/2126/lang/en

  If you do not want to install DAQmx Base on Windows PC, it is a conversion utility that should help to automate the conversion of your VI of DAQmx Base DAQmx code.  This can be found in the link below:

  Conversion utility: http://joule.ni.com/nidu/cds/view/p/id/446/lang/en

  Smercurio_fc suggested, submit your interest for and day DAQmx version of Mac OS X in the exchange of ideas.  User in LabVIEW 2010, more than 10 different proposals implemented in the exchange of ideas.

  Kind regards

• How to recover the file users programmatically in LabVIEW

  Hello

  I would create custom LabVIEW User Manager tool, but I can't get the user container. I am able to get the table of users (I have only 'administrator' item in the users file), but I'm not able to get the Subproperty I get error-17306 in GetNumSubProperties.

  I tried with the following code.

  

  How to copy all users files to the LabVIEW tree control programmatically Or at least all tabular list.

  First of all I can tell you that it will always be 5 on the NumSubProperties.

  The problem is that you use the name as the lookupString.  Pass an empty string and you'll see what you want.  An empty string will get the number of the subproperties of the current PropertyObject, which in this case is the user.

  Or you can convert your GetPropertyObjectByOffset reference to a user using a variant of data and use a constant refnum affect the API TestStand user.  In this way, you can use the TestStand API for the user to get what you want.  I have attached a small example of using LabVIEW and TestStand 2010 2011

• How does the file access work between Mac and VM

  Hi I am a new user to the Fusion of the VM. I have a new Mac, and I loaded Fusion of VM, some Serif desiging websites software and Vista. So, how to file access works between the Mac and the VM? All my files are on my hard drive to the Mac. I am ready to use the Serif software to make changes to my site, but how do I access files? Can they stay on the Mac and be shared - how do for them? Or transfer them to my hard drive to the VM?

  Thank you.

  Can connect the guest in an operating system file system Virtual Machine as if it was another physical Machine on the LAN once properly configured at the level of the BONE in both operating systems using industry Standard SBM/CIFS shares and has nothing to do with VMware Fusion provides in itself that the Virtual Machine has a virtual network adapter connected.  No matter if it is set to bridged, NAT. (default) or host-only because you can communicate between the host and the guest with any of them.

  The other option is to use VMware shared folders and or files in reverse.  While the second is a nice feature, it is problematic during the installation/uninstallation of some software in Windows Welcome and my need to be disabled mirrored folders for installs it / uninstalls and then reactivated.  To understand the issue take a look on note them it applies more so what is there in the if APPLIES to Microsoft KB Article below: article.  Take a look at you receive an "Error 1606" error message when you try to install or remove a program from Microsoft if the files in reverse are or have been activated and you get an Error 1606.

  In addition to the files shared VMware and or files in reverse, you can also drag and drop files between the host and the display of the Virtual Machine, for example from office to office.  Note: All of these VMware features require the VMware Tools installed in the supported host operating systems.

  Or of course, you can move the file system of the client files if you wish.

• I have an Apple Macbook Pro. My photos are in the iPhoto files. How to transfer the file I want to work on Photoshop?

  I have an Apple Macbook Pro. My photos are in the iPhoto files. How to transfer the file I want to work on Photoshop?

  Where the iPhoto photos are located and how to access the photo library, iPhoto and image files

• BlackBerry Z10 Bb10 not work and how to restore backup files

  Hi all
  My z10 keeps restarting itself up to a point where only the name of blackberry appears and nothing more. Fortunately enough I had a recent upward from my phone. However I tried to reinstall the software, it does not, changed the battery still does not not so I decided to upgrade to the iPhone. I tried on how to retrieve my files to my iPhone now, but I couldn't. No idea please. I need help.

  Unless your files are stored on your media card, it will be difficult. If you can get your BlackBerry to turn on, you can visit www.deviceswitch.com to each phone's browser to transfer files. If you can't find your phone to turn on, you'd be out of luck.

  See you soon.

• How to remove project files, trash, outbox, sent to local folders?

  These files are a nuisance because they are not necessary and they take up space in the list so I have to move and go down frequently. After you install a second identity, themselves appeared twice in the list! Since the second identity failed provider more after some time (I tested the second identity on another computer where he worked, but of course unwanted directories were there as well, at least not in duplicate), I removed the second identity, the account has disappeared, but duplicates are still there. I managed to find the deeply hidden files on the C pass under "roaming" etc, which was wrong of course. I discovered how can I move files containing messages in the local folders in Thunderbird on a different computer. This will be useful as a backup. However, when I delete files unwanted mentioned in my question, they always after I have restart Thunderbird. I searched the knowledge base several times and found a little confusing. In one window, I found my question in a series of questions by a user, but I couldn't answer key (a number of responses has been designated, but I couldn't find a link to the answers). At the age of 82 years old I still find my way in the computer, but I realize that I'm not in competition with the younger generation. In general, I find Thunderbird works fine for me after several years of use, in any case, I find it much better than Outlook.

  Local folders is a special account; they are the default folders cannot be deleted.
  The "Outbox" in local folders is used by all e-mail accounts.

  If you see more than one Local, Outbox etc folder, you use smart folders view?

  Make sure you use this view:

  • View > folders > all the

  About wanting to 'hide' the local folders, try this addon:

  • https://addons.Mozilla.org/en-us/Thunderbird/addon/hide-local-folders/

• How to move a file to the rear using the Terminal

  Hello world

  I just recently started to learn how to use the terminal in OS X I learned how to move files from one directory to another, but I don't know how to move a file back again. Here is an example:

  (I'm already in the Desktop directory) In my office, I have a folder named "music" and a file called "algo.rtf". In order to move the "algo.rtf" file in the "music" folder, I type the following command: "musica algo.rtf mv / '. That works perfectly fine, when I check, the file is now in the new folder.

  But what happens if I want to move the file "algo.rtf" which is now in "musica" on the desktop? I can't understand. I tried the following:

  'cd musica' (so now I'm in the folder where the file is) and from there I typed: "mv algo.rtf Desktop /" (but then it is said; no such directory not found)

  I understand that he says no "found" because it is looking for a folder named "Desktop" in the folder named "music" and this is why it does not work.

  But that still doesn't help me much because I still don't know how to bring it back to "Desktop". If anyone knows how to do this, I would be very happy for your response!

  Thank you.

  Use:

  MV algo.rtf...

  (140623)

• How can I move files to memory stick using Vista

  Can anyone throw any light on my new problem.

  I use Windows Vista Home on my Toshiba Satellite 350 and I'm trying to save a file on memory stick.
  I find the right file and click on 'send to removable disk '.

  I then get an "Item not found" box that contains the message, "

  "Could not find this point, this point is no longer in C:\Users\Desktop.
  "I (or any place seeking) check the location of the elements, and then try again.
  I checked the site and I have the right pair.

  I tried several times with different types of files/places and I get a similar message whenever I try to move the file to anywhere, not only the memory stick

  I tried dragging the files to the box and get the same message, copy and paste do not work I still get the same message?

  Anything I'm doing wrong?

  Are you kidding me?
  You n t know how copy/move the files on the other machine?

  You must mark the file, and then press CTRL + X (shortened for CUP) then go on the memory stick and open it. Press CTRL + V (paste).

  All that s!

• Satellite U - How to recover deleted files from mysafe?

  Hello

  Does anyone know how to recover deleted files from mysafe?

  I'm not 100% sure but I think that the data in this folder will not be deleted to bin recycled initially, but they will be removed immediately.
  How recovery them? Good question?

  Try to find some third party applications that can scan the HARD disk for deleted files. The point is that it will work if the FAT (File allocation table) is deleted only. This means that the file is on the HARD disk, but the disk HARD doesn t know where exactly.
  Hmmm... It is not so easy.

• How can I transfer files from desktop to Satellite L10

  How can I transfer files (My Documents) of desktop running Windows XP for Toshiba L10 portable? No COM or serial port L10.

  Hello

  I prefer to use the connection to the local network. It s a simple procedure.
  You must set the same workgroup on both devices (laptop and desktop)
  Then you will need to select the LAN card properties and select the properties of the TCP/IP protocol.
  Here, you must set the IP on the laptop such as the 192.168.50.1 and the laptop at 192.168.50.2
  Door entry and other parameters to solve automatically.
  Don t forget to set the sharing option on the folder where the files are placed.
  After restarting again the connection to the local network should work.

• How to find corrupted files and remove them on mac i

  How to find corrupted files and remove them on i mac?  AM currently using OS x EL capitan 10.11.12 Mac said to run slowly and the recent upload did not work until the 3rd attempt.

  Thank you

  You do not have.

  You can run this program and post the results so that we can see what you have installed that could cause your problems.

  http://www.etresoft.com/etrecheck

• How to open a file with an error .tdms when measuring?

  Hello

  I work with LabVIEW and tiara. In the LabVIEW, I write all my measurements in a file .tdms on the internal network. If I stop as the close .tdms file and I can open in DIAdem and calculate everything what I need with my script. Last week I did a long time measurement and the intern network was defective. So the LabVIEW didn't close the .tdms as usual file. There are 3 files on the network:

  . TDMS. TDMS.log / .tdms_index

  If I try to open the .tdms file there is a mistake. But I don't see that there is some data in the file (the file size). And if the .tdms LabVIEW close it correctly there is none. TDMS.log file. The question is, can I open my data in DIAdem, and how can I do?

  Thank you

  Hello

  You can zip and attach your file tdms here. I'll try to get it back.

  Thank you

  zaizhou.Ma