How to open the back door of HP Touchsmart 11-E102AU

Similar Questions

• 15 - af005ax: how to open the back cover

  Hello.. I would like to ask how to open the back cover for my laptop? Can you give me the tutorial? I want to clean my built in fan.

  Thank you

  Hello Nikki_Ong,

  You can go there.

  Link: http://h10032.www1.hp.com/ctg/Manual/c04653881

  Page 45

• HP Pavilion 23-g010: HP Pavilion 23-g010 how to open the back casing

  I would like to put the extra RAM, but could not find any instruction on how to open the case. Can someone please?

  Finally find the solution here:

  http://h20564.www2.HP.com/hpsc/doc/public/display?docLocale=en_US&docid=emr_na-c04275858

  It is not enough for g010, but good.

• How to open the back

  Mobile entertainment for the Pavilion dv8 1200

  I removed the screws that are present... I can not yet communicated to the back of the Pavilion dv8... computer laptop. I want to take a look on the fan and processor... my laptop is overheating and closing...

  is there a release on the back to open...

  Thank you

  NENA

  Hello

  On the following page #4-6 manual 6th on the link will show you all the:

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=4150052

  Kind regards.

• LaserJet pro 1415: cannot open the cartridge door and prints have red lines on them

  First problem was the red lines on the printed pages, now I can't open the cartridge door

  Just to close the loop, we decided to force the drawer open, because the printer was unusable anyway even if we have something broken. With a lot of pressure, the drawer open. We then tried to print something and a message there is a paper jam.  We opened the back door to clear paper jam and off broke a spring and a broken then only plastic parts. We cleared the jam and thought that the broken part just came to the door but was clearing of the works.  Then we printed out a page and everything worked fine.  If the door does not close completely because it is missing a piece, so what? The printer works fine. Thanks for trying to help.

• How to make the disc door opens on my inspiron 570

  I don't know how to open the dvd disc tray.

  If there is no button eject off the road, then it must be done via the software. Find your DVD drive in Windows Explorer, right-click on it and select eject.

  Maybe DVD movie playback software as an eject button too.

• How to open the cover slot of memory on Satellite M60?

  Hello

  I want to add memory in my M60, but I do not understand how to access the inside... It seems easy to open the back of the drive hard, but for the record, I unscrew and after, the "door" stay in place and do ' t want to be removed...

  Thank you

  Hello

  Yes, it is easy to remove the cover of the memory at the bottom of the unit.
  I don't think that a single screw covers the memory slot cover. Remove this screw and use something thin and flat to remove the cover

  The details, you should find in the user manual (in my user manual I ve instruction)

• How to open the Acer Aspire ZC-606?

  Can I get help from you pros Acer? I have an all-in-one Acer Aspire ZC-606 which I want to increase the RAM to 8 GB (the maximum possible) so it might run a little better. I have NO idea how to open it! I don't see any screws top anywhere on the back. You get it open? Answers would be appreciated.

  Exact specifications:
  Acer Aspire ZC-606-UR24

  Intel Celeron J1990

  4 GB of RAM (for now)

  450GB HDD (Seagate)

  DVD-ROM drive

  Gigabit ethernet

  1600 x 1200 display

  to open the back of your ZC, you must open the 2 feet at the bottom of the back cover and unscrew the 2 screws; with a PIN that you had to push into the small hole in the DVD player until he slip; Then, you can lift the back cover.

  to access the RAM memory modules, you must unscrew the 2 screws of the metal cover right.

  your system supports up to 8 GB of total ram (4 GB x 2).

• HP 15-G002AX: how to open the front rear of the hp 15-g002ax

  I oened all screws, but could not open the back cover of my laptop. In fact, I want to add a new ram. Help, please!

  Hi @PyroAgent,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums.

  Learn how to post and more

  I understand that you try to open your laptop to add the new ram.

  Here is a link to the 15 HP Notebook PC Compaq 15 Notebook PC Maintenance and Service of Guide.  Please note Chapter 4 on page 29 for removal and replacement procedures.

  To say thank you for answering, please click the button below thumbs up .

  If this gave a solution for you, please tell people in choosing the solution provided.

  Good luck!

• How to open the case of a slate 3400US 7 HD?

  I have a HP Slate HD 3400US and want to open the back to change the battery.
  There are actually several different models of 7 slate,
  and there are a few YouTube videos showing the dismantling,
  but they are NOT the 3400US, but a different model of 7 Slate.

  The 3400US has no screws on the outside and the back fits perfectly
  on the rest of the Tablet, then it not there no openings or cracks
  where I can stick a small screwdriver in.

  I don't want to raise at random inside because that would leave nicknames
  on the edge of the case, and I might end up inadvertently break.

  There must be a hidden somewhere tab that would free up the back.
  Does anyone know how to get inside?

  Thanks for any help.

  ...

  Hello

  The SECOND manual from the following link shows you how (#18 page):

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&product=6608634

  Good luck.

• How to open the case of a 15-g020ca hp?

  How to open the case of a 15-g020ca hp? I would like to replace the hard drive. The screws in the back seem to do nothing. It appears no release (or torque) seems them to have no effect on anything.

  Hello:

  Here is the link to the service manual for your laptop.

  http://h10032.www1.HP.com/CTG/manual/c04162986.PDF

  Read the applicable removal procedures section parts and replacement.

• How to open the Panel rear Dell Precision M4600

  I want to open the back of the Dell Precision M4600 Panel so that I can increase the RAM and also put in a secondary hard drive. There is no documentation or a tutorial for that. Anyone can provide and guide on how to do it? I can't remove the battery, but here I'm lost. I see 2 screws on the back rear panel, but I don't know if it's the right screw to remove.

  Any help is appreciated.

  EDIT: Found the manual!

  ADMIN NOTE: broken link has been removed from this post by Dell >

  To add to the post of urlnotfound:

  Remove the two screws under the battery holding the lid.

  Slide, sometimes with a bit of force, the cover backward toward the back of the laptop.  Only, he moves about 1/4 "and is free to raise at this time here.

  Note that there is only a single 2.5 "HDD place, and it's the hot-swapable one you see on the side (still to figure out how to remove it, level didn't seem to do anything - for the moment).  "2nd HARD drive" is actually a dedicated slot 'mSATA', which means minicards SATA.  It's a tiny, as the three PCI-express slot you see when you remove the cover.  They are very rare to buy the property.  I really wish that I bought a Dell offered, aftermarket cause they are next to the non-existent.  I found only 2 manufacturers, which are the same brands under the hood.  But they are only the size of 50mm.  I want a site of 70mm slit in the WWLAN PCI-Express slot, cause those are available up to 240 GB.

  And FYI, devices with SATA II interfaces mSATA can get up to 240 to 250 MB/s read/write!  No, there are no mSATA SATA III that I could find.  Wanted for a month for them...

  Note also that only two senior RAM sticks are available here.  I'm about to call Dell support for where are the othe two DIMM slots (very probably have to remove the background map).

• How to open the H.265 duplicator of Blackmagic design video clips

  How to open the H.265 duplicator of Blackmagic design video clips.

  You could try VLC.

  If you mean for editing then unfortunately Apple is very, very backward these days in terms of codec support. You will probably need to look at Adobe first place.

  Its a bit of chicken and eggs at the moment, we do not know if the reason for Final Cut Pro X is neglected is because the Mac Pro has not been upgraded, or have Apple decided to abandon the Mac Pro, because they are more interested in market Pro at all.

• How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  How to open the dialog Ctrl + Tab of a script? (I want to assign to a move of the mouse)

  Do you mean Ctrl Tab (browser.ctrlTab.previews) Preview or browser: ShowAllTabs (allTabs.open ()); command or something else?

• How to open the mobile firefox error console?

  Hello! I developed a Web site for android devices, and for my case Firefox exceeds all other browsers. But the problem is that I don't know how to open the error console, which is absolutely necessary for a developer.

  I've seen some guides like this:
  https://quality.Mozilla.org/docs/mobile-Firefox/Firefox-mobile-enabling-the-error-console/
  that seems rather useful. However, I can't open the "preference" as he says.

  Any suggestions are welcome. I'm open if you want to use the console via a remote computer, as doing the Opera or Chrome; or simply view all on the mobile device itself. I'm also happy if anyone knows how to open the preferences window. I use Firefox 15 on Samsung Galaxy Tab.

  Thank you ~!

  This article is dated. Please visit https://hacks.mozilla.org/2012/08/remote-debugging-on-firefox-for-android/