How to perform a clean installation on a Ultrabook using its files of windows 8?

Similar Questions

• Can I perform a clean installation of Vista without losing my files?

  Can I install a clean copy of Vista without losing my files?

  Sorry for the bad news to your friend.

  But thank you for the reply.

  The only way to repair Vista comes in a Vista operating system, which you don't have.

  See you soon.

  Mick Murphy - Microsoft partner

• How to perform a clean installation on Satellite PS183E

  I have an old laptop that I defer to my friend but want to wipe it before you do.

  I do not know my admin password only a limited user and do not have a startup disk.

  What can I do?

  You can install the operating system that is supported for this model of laptop computer using the Microsoft CD/DVD facilities. All the drivers, tools and utilities that you can find on Toshiba support page http://eu.computers.toshiba-europe.com

  Good bye

• How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  How can I perform a clean installation of Mac OS x for my iMAC, retina 5K late 2014 with drive of Fusion with the intact Recovery HD partition?

  Pure how to install OSX on a Fusion drive and keep the recovery disc function

  These instructions assume that your iMAC partitions or file systems has been damaged and you want to restore to the way most efficiency with fusion drive and the recovery partition, similar to what was built in the factory.

  These instructions work for the iMAC, retina 5K end 2014 version comes with OSX Yosemite. The scores of major drive of the 128 G SSD and 3 TB of HARD drive has been configured as a logical drive (merger by car).

  WARNING: These instructions here are shared for interest only. Readers to take their own risk by following these instructions. The author is not responsible for any damage caused by following these instructions.

  This is the target disk partitions, and the configuration that we want to achieve.

  Disk0 is the 128 GB SSD - solid state drive and holds the start of the partition (disk0s3)

  Disk1 is the 3.0 to HDD - mechanical transmission and holds the Recovery HD partition.

  There are two EFI partitions to partition table GUID on both hard drives (disk0s1, disk1s1).

  Disk space remaining (partition disk0s2 and disk1s2) are used to create the disc of Fusion 3.1 to named "Macintosh HD".

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB LVG 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: disk1s2 Apple_CoreStorage TB 3.0 LVG

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 3.1 TB disk2

  Logical volume on disk0s2, disk1s2

  0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  Fusion unencrypted drive

  Here's how we do it.

  • A. clean reinstallation of Mac OS x.
  • 1. make sure that you back up all your data on the hard drive using Time Machine or other means. The following procedure will delete all data.
  • 2. create the OSX install USB, insert it to the MAC workstation.
  • 3. given that us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 4. in the menu at the top of the screen, select disk utilities.
  • 5. turn highlighted the volume of disk Fusion called "Macintosh HD." Click clear to clean.
  • 6. If his success, then go ahead to install OSX new to that partition, as usual.
  • 7. otherwise, if it does not, that means fusion drive has been damaged.
  • 8 follow the instructions below to fix it.
  • . B. Split disc Fusion in the physical hard disks
  • 1. Since us will be operated on the internal drive of the Mac trunk, assumes that we already have boot up OSX install USB drive (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3. on the screen of the terminal type:
  • Cs diskutil list.
  • You will see something similar to the screen below.
  • 4 copy the long string after Logical Volume and replace the UUID with it in the following command to delete the logical volume of the disc fusion (aka coreStorage of logical volume):
  • diskutil deletevolume cs UUID
  • For example:
  • diskutil deletevolume E59B5A99-F8C1-461A-AE54-6EC11B095161 cs
  • 5 copy the long string after the logical volume group and replace the UUID with it in the following command to remove the drive (aka coreStorage) fusion:
  • diskutil cs remove UUID
  • p. ex. diskutil cs remove E03B3F30-6A1B-4DCD-9E14-5E927BC3F5DC
  • 6. at this stage, the fusion drive has been deleted, and hardsisk SSD and mechanical hard drive will be reappear in diskutil or separate records.
  • 7. If step 5 or 6 takes more than 30 minutes to complete, this means that the fusion drive has been corrupted. You can follow the commands below to clear the table to partition the hard way. First command clears the SSD drive, second command erases the HARD drive.
  • The command does not return a response, after 1 minute, press Ctrl + Z to complete orders. 1 minute is enough data to code and erase the partition table on the disk.
  • cat/etc/random >/dev/disk0
  • cat/etc/random >/dev/disk1
  • . C install a new copy of Mac OS x for the hard drive HDD and tested this disk partition hard recovery work.
  • 1. go on diskutil to create a partition called Macintosh HD HDD hard drive using all the space there.
  • 2 do the same with the mechanical hard drive.
  • 3. follow the usual procedure to boot from the installation of OSX USB and install a new copy of Mac OS x hard disk SSD.
  • 4. This will create the correct priming of the partitions, recovery hard drive partitions and PSX partitions hard disk HDD.
  • 5. once the installation is complete, test if OSX may start successfully, but no need to go through the initial MAC OS x didn't put in place that we're going to waste this and do the installation again later.
  • 6. we must now test if the recovery hard drive partition works.
  • 7. reboot for hard drive recovery (see X - by pressing command and R at the same time during boot right after that you hear sound start and release only a few seconds after you see the apple logo and the progress bar for loading...)
  • 8. it is important to test and make sure that the partition of hard drive recovery.
  • D. recreate the fusion drive
  • 1 since us will be operated on the internal trunk of the reader of the Mac, it must start on OSX install USB (see Y.).
  • 2. in the menu at the top of the screen, select utilities and Terminal.
  • 3
  . on the screen of the terminal type:
• diskutil list.
• You should find that we have a list of disk group hard physical volume only, no logic here still.
• 4. you will see something similar to the screen below.
• 5. search for the largest partition on the SSD hard drive, which should be close to the maximum size of HDD to the SSD (121 G, for example) and mark the name of the device, this will usually be something like/dev/disk0s2
• 6. search the largest disk partition mechanical forming fusion with the SSD hard drive. This should be close to the maximum size of the mechanical hard drive (for example 3 TB) hard disk and mark the name of the device, this will usually be something like/dev/disk1s2
• 7
. Now let's create the merger in car (group alias logical volume) in the Terminal, type: diskutil cs create nom_lecteur driveIDs
• The number of the driveIDs is unlimited, it may be a number of discs, or a number of disk partitions. Always put the faster discs first, for example for our SSD disk0s2
• For example:
• diskutil cs create fusiondrive disk0s2 disk1s2
• diskutil - the version of disk utility command line.
  cs - This calls for Core Storage, which is necessary for the merger.
  create - creates a basic storage group.
  nom_lecteur - is the name of the drive and how you want that he
• appear in the disk utility (not the Finder - that comes later). You can call it what you like; in our example, we named our Fusion table "Fusion".

driveIDs - Here is the Player IDs of the readers you want as part of your Fusion table, separated by a space. In our example, they are 'disk0' and 'disk1', but it may be different in your configuration.
• It is important that the faster hard drive appears first in the command, which in our case the disk0s2 (a partition in the SSD). In this way, drive fusion will use this disk as primary and the cache. The second disc in the command, in this case disk1s2 (a partition on the HARD disk). The secondary disk (HARD drive) is used to store less frequently used files.  Otherwise, the fusion drive performance will be worse that it is designed for.
• 8. you will see something like below appear on the screen:
• Creation Volume logical storage of kernel
• Move isk0s2 storage of carrots
• Disk1s2 of switching for the storage of carrots
• Waiting for logical volume group appear
• Discovered the new group of logical volumes 'DBFEB690-107B-4EA6-905B-2971D10F5B53 '.
• Store LVG UUID: DBFEB690-107B-4EA6-905B-2971D10F5B53
• Finished CoreStorage operation
• 9 copy to the bottom of the string after "Discovering new Volume Logic Group" using the command + C
• 10. next, create the partition of the merger (alias logical volume) drive named "Macintosh HD".
• In the Terminal, type: diskutil createVolume groupString jhfs cs + size volumeName
• For example:
• Diskutil createVolume DBFEB690-107B-4EA6-905B-2971D10F5B53 jhfs cs + 'Macintosh HD' 100%
• diskutil - once again, this is the version of disk utility command line.
• cs - called the basic storage functions, which are necessary for this arrangement.
• createVolume - this is the command to create the storage area real for the reader who is represented by an icon on your desktop.
• groupstring - this is the long alphanumeric string you copied in the previous step. It identifies the table you created such as getting a volume placed on it.
• jhfs + -the format of the disc. It is Apple (journaled) extended Format, which is recommended for drives with an operating system installed on it.
• VolumeName - the actual name of the volume, how it should appear under the icon. If there is a space in the name, you must put the full name in quotes ("name") or put a slash before the (name Drive\) space. In our example, we made these, naming our volume "Macintosh HD".
• size : this is the size of the volume. In our example, we had a 1.1 TB drive. We used '1100g' to describe what 1100 GB (1.1 TB to base 10). Otherwise, we could have also used 1.1 T or even 100% as a size.
• 11. go to diskutil to verify that you can see this new partition on the list.
• 12. test by erasing all the data from it.
• 13. then you can go ahead to start on the USB drive to install OSX and install a new copy of Mac OS x on it.
• 14. This will allow you to keep the recovery disk feature.
• X. how Prime to recover partition
• Press and hold the command and button R set immediately after hearing the bells to boot.
• Only release it 2 seconds after you see the Apple logo on the screen and the progress bar for the start. This will start the partition of hard drive recovery.
• Y. how-to boot OSX install USB
• Press and hold the command and the optionkey together immediately after hearing the ringing of boot.
• Only release it 2 seconds after you see the Apple logo on the screen and it will give you a list of startup disk choice, choose the OSX install USB to boot from.

• How can I perform a clean installation of Windows XP Edition family?

  How to do a clean install of xp with the drivers download and windows updates so no internet not downloaded

  Hello
   
  1. have you installed Windows 7 with Windows XP?
  2. is this a new installation?
  3. What is the blue screen of death error code number?
   
   
  Method 1:
  Step 1:
  
  Check if the problem persists in safe mode, to start the computer in safe mode follow the article mentioned below:
  
  Link, please refer to: start your computer in safe mode:
    
   http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
  
  Step 2:
   
  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135
   
  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.
  
  Method 2:
  
  Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly
  See the link: http://windows.microsoft.com/en-US/windows7/Startup-Repair-frequently-asked-questions
   
  Reference:
   
  Resolve stop (blue screen) error in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

• How to perform a new installation of window 8.1?

  Hello

  (If this is important), I use an Alienware X 51 R2 with the following specifications:

  Intel i5 4440U 3.3 GHz processor

  AMD R9 270 2 GB

  8 GB RAM

  1 TB HARD DRIVE

  Basically, my alienware has had many recent accidents before I made my own window installation 8.1 via the USB port. I thought it will run more fast and smoother after I have done, but here are a few problems:

  1 secure Boot product still "no error of Boot Drives Found" as soon as I turn on the computer. So I have to disable Secure Boot.

  2 application opening time is still as slow as before the clean install (i.e. Chrome)

  So, is there a procedure step by step on how to perform a new installation of window 8.1? I want this PC to match at the beginning when I first bought.

  Any help would be greatly appreciated.

  Thank you

  Tin

  You must prepare installation media is to present FAT32 the GPT partition scheme and parameters of the UEFI BIOS with secureboot. See here for more details:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  You can perform additional steps to clean your drive before installing Windows:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  For complete instructions, see here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/

  Note You may want to complete execution F12 diagnostic tests to verify the correct materials:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  If you want to speed up your system to get rid of the mechanical HARD drive and replace it with an SSD for example the 250-500 GB MX200 Crucial:

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/Alienware/x51-R2

• Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive. We will ask for a driver

  Is it possible to perform a clean installation of Windows 7 using an external USB DVD drive.  We will ask for a driver.

  I did will need you you will need to Prime boot in the BIOS and set to boot from it.

  For information about how to modify your BIOS options to boot from the DVD drive, see the following tutorial:

  http://notebooks.com/2011/05/05/How-to-load-BIOS-and-change-boot-configuration/

• How to perform a new installation while keeping the book mark, addons, etc.?

  I need to perform a new installation and I would like to keep my personal information, bookmarks, etc.. I know these info are stored separately and want to use it in the new facility. How can I do?

  Your personal data are stored in your profile. This folder is normally left intact when uninstalling Firefox, unless you check the option 'remove my Firefox personal data '.

  • Profiles - where Firefox stores your bookmarks, passwords and other user data
  • Recovering important data over an old profile

  Also note that most of the problems with Firefox are contained in the profile folder. You can get a fresh start while maintaining things like Favorites and passwords resetting Firefox.

  • Firefox - modules to reset and refresh settings

• Cannot perform a clean installation of Windows 8

  As the title suggests, every time I went through the installation, I always find myself with the old windows files and a start-up Win 8 or 'old version' option, I deleted all the partitions on the disk and selected format option (twice now) but every time that Windows 8 installation is complete I am presented with this option.  It's using a disc of Windows 8 full version, not an upgrade.

  How to go beyond that or get a completely clean install?  The old version is not yet complete - is in fact an aborted XP install start-up that has been abandoned.
  Edit - I also tried a reformat with Ubuntu.  The drive looked clean, but as soon as I start it up, it started in the XP installation or if you install Windows 8, it preserves and presents the two options listed above.  I do not understand how a disk partitioned/reformatted it retains these configuration/Windows system files.

  You have multiple hard disks installed in the computer?

  If so, disconnect all except the hard disk target where you will install Windows 8.

• Error 0 x 80070570 when you perform a clean installation of 8.1 Pro

  I'm trying to do a clean installation of Windows Pro 8.1 and receive the error code 0 x 80070570 immediately after entering the product code and selecting the installation drive.

  The error box says it is related to missing or corrupt files. The disc itself is bad, or the error code is incorrect. If the first case, is possible to get a replacement disk or an .iso image in order to create a new installation disc? If the latter, what now?

  I'm trying to do a clean installation of Windows Pro 8.1 and receive the error code 0 x 80070570 immediately after entering the product code and selecting the installation drive.

  The error box says it is related to missing or corrupt files. The disc itself is bad, or the error code is incorrect. If the first case, is possible to get a replacement disk or an .iso image in order to create a new installation disc? If the latter, what now?

  I managed to solve this problem by formatting the disk prior to installation. This, of course, reduces the possibility of recovering the old information from the Windows.old folder to nothingness.

• can I save files with easy transfer before you perform a clean installation of Windows 7 on the same PC?

  I have an era of BIOS in Windows 7 and have to restart from the installation disc.  I want to save my files before doing a clean install to remove my problem then re - install my files after the slate.  Can I use Windows easy transfer to save the files, even on a partition on the drive C: then do 'clean' installation and subsequently transferring my files stored in Windows 7 on another partition, same computer?

  I could live in a dream world...
  Thank you
  Sam

  Yes, but it is strongly recommended to use an external storage for backup device.

  http://www.notebooks.com/2009/10/07/using-Windows-easy-transfer-in-Windows-7/

• How to perform a clean boot on Dell Inspiron 531 32 bit

  Impossible to get into Windows, menu missing also start

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  reinstall using dell dvd

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=339949

  using the dell recovery partition

  http://supportapj.Dell.com/support/topics/global.aspx/support/DSN/en/document?journalid=67E9C215C4BABD6CE040AE0AB5E14F05&docid=336966

• How can I perform a clean installation of Windows 7 HP-recovery?

  Hello

  I recently bought a Pavilion DV7-6150eo opportunity, and it came with a clean install of Windows 7. In order to get the correct drivers, and system tools, I would install the Windows HP-image, if possible. Where can I find it on the computer, if possible? Or I have a HP recovery kit sent me physically?

  If not this, then what drivers should I make sure to get from HP.com section 'Support & drivers '?

  Thank you

  Sebons.

  Hello

  Installation of HP discs are validated by reading a "tattoo" on the bios, so the media since another laptop will not be installed.

  The easiest option would be to order a set of recovery discs using the link below - replacement cost vary depending where in the world you live, but they are generally inexpensive...

  Order HP recovery disks.

  If you have a problem with this link, order them directly from HP.

  If you live in the United States, contact HP here.

  If you are in another part of the world, begin here.

  If you just want to keep the current installation, you must really check in Device Manager to see if anything is missing or has an error icon you can see that all the necessary drivers are already installed.

  Kind regards

  DP - K

• Upgrade the hardware of Dell XPS (L521x) how to perform a clean reinstall of Windows 10 Pro

  Hello

  I searched on the internet with the question that I have before doing the upgrade and the re-installation of windows. But the messages and solutions are all scattered. I really want to clear this for me once and for all if possible.

  First of all, the material that I bought for this upgrade:

  1 Samsung 850 EVO mSATA SSD 120 GB (to replace the one 32 GB (factory default)

  2 western Digital Black 750Go Performance Mobile HDD (7200 RPM, 2.5 inches)

  3 Intel (r) Dual Band Wireless - AC 7260 (802.11ac, 2 x 2 Wi - Fi, Bluetooth)

  4. crucial Ballistix Sport SODIMM 16 GB (2x8GB) PC3-14900 CL10 at 1.35v 204 pin memory

  BTW, my Dell XPS 15 L521x has an intel core i7-3632QM and an nVIDIA GeForce GT 640 M. It also comes with 32 mSATA SSD as cache for the WDC 1 TB HARD drive.

  My goal:

  1 install/reinstall Windows 10 mSATA SSD 120 GB and free 500 MB give or take for system reserved partition.

  2. use the remaining space in the C: drive.

  3. use WD Black 2.5 inch 750 GB HHD for cold storage

  4. Remove and reinstall the wireless card Intel Dual Band for a better Wi - Fi compatiability for most routers dual band out there. (Factory default, well, is not great to say the least)

  5. Remove and then install the crucial RAM (compatiable with L521x) is to upgrade memory of my laptop (maybe a little future-proof;) (D).

  Before you start the upgrade, I know I have to do the following steps:

  1. update my BIOS/UEFI. (I did it)

  2 clear accelerated Intel Rapid Start Technology (IRST) GUI (my laptop keeps inviting that "your system does not have any intel repaid with start technology").

  3. change Intel Smart response Technology (ISRT) to AHCI in BIOS

  4 back up my files

  5. my 10 Pro Activation of emergency Windows (how exactly? The Win10 Pro is upgraded to Windows Pro 8.1 with OEM Dell)

  Now my question is what I do or what I've been missing so that what I will meet errors or problems if possible.

  Also, I have heard or seen something on the OEM of Windows version. If I change the hardware, disk files or recovering backup activation does not recognize my device. Is this true? If necessary, I can buy a new version of Win10 Pro retail. But, what I really need to do, and does it perform a not-so-complicated work around?

  Thank you very much

  Dean

  If you keep your motherboard you have no problem taking the other components such as SSDS.

  Your system is already a Pro 10 Windows device.

  Installing clean with 10 Windows installation media Pro TH2 your OEM Pro 8.1 Windows key will be automatically entered to the UEFI BIOS and Windows 10 Pro TH2 automatically reactivates when your systems online.

• While performing a clean installation of Windows Vista, I get to the part "select driver to be installed" but there is no driver. What is going on?

  Select the driver to be installed problem during installation (Vista 32 bit)?

  So, I finally managed to get my office to start the disc because im trying to do a clean install because my family somehow acquiring an infection of Hadily on it. However as soon as I get to the part "select the driver to install" installation my computer comes up with nothing = / I scanned the Boot(x:) et le disque local (c), but it says that there is no drivers are found to install.) I don't understand what is happening? shouldn't the disc have everything you need? I was told "to put versions textmode of my SATA interface on a Flash DRIVE or a CD driver" but I don't know how to do this.

  Hello

  I suggest you to refer to this link and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista

  It will be useful.