How to perform the SFC without disk window?

Similar Questions

• How to fix the OS without installing Windows completely?

  I have a laptop A10 that crashed after a virus attack or a worm. (I think).
  It came with two recovery disks and a driver disc etc.
  It starts, but you cannot start windows XP, the file \windows\system32\config\system is missing or damaged. He tells me that I cannot attempt repair this file by starting Windows Setup using the original installation of Windows CD-ROM, after which I need to select 'r' in the first screen.

  I don't have a Windows installation disc, Windows XP must be on the recovery disks. They give me the opportunity to completely reinstall windows, which I am unwilling to do. Another option is intended for users of the teacher, but I don't see the usefulness.

  How to repair or reinstall the config sys without re install windows completely?

  With respect,
  Hans

  Hi Hans

  As far as I know it s not possible to copy some files from the recovery CD singles, because it s just an image on CD. I think that the only way to fix this is to recover your system with the restore CD.
  If anyone has any other ideas please share with us.

  Best regards

• Why can't my computer without disk Windows 8?

  Why can't restart my computer without disk windows 8?

  Hi Bryan,.

  Thank you for giving us the opportunity to help you with the query.

  I understand the inconvenience caused, now that you have me with you I would take care of that.

  • What happens when you try to restart the computer without disk Windows 8?

  This could be due to incompatible driver of settings\ misfeed.

  Let us try the following steps and check if it helps.

  Step 1: I suggest you run the troubleshooter of power that will tell you if there is something wrong with the power settings.

  Follow these steps to run the troubleshooter of power.

  1. Press the Windows key + X key and select Control Panel
  2. Select Troubleshooting.
  3. Select show all in the upper left corner.
  4. Run troubleshooting power. 

  Step 2: I suggest a reset and restore all the of the default power Plans to return to their default settings. Follow these steps:

  1. press on Windows Key + X.
  2. Select (Admin) command prompt.
  3. at the command prompt, type powercfg - restoredefaultschemesand then press ENTER.
  4. at the command prompt, type exit to exit the command prompt window.
  5. restart the computer and check with the question.

  In addition, make sure that you have the latest drivers installed on your computer.

  You can have Windows automatically download recommended drivers and detailed information for your hardware and devices. It is a good way to ensure that all your hardware and devices work properly.

  It will be useful.

  Let us know the status, we are happy to help you further.

• windows vista 64-bit vista need upgrade Express dvd, but can't without a yellow sticker? is - this saposed to be somewhere on my pc? or on the vista cd case? and how to make the upgrade without the sticker? __

  need vista in windows vista 64-bit upgrade Express dvd, but can't without a yellow sticker? is - this saposed to be somewhere on my pc? or on the vista cd case? and how to make the upgrade without the sticker?

  32-bit to 64-bit is NOT an upgrade path.

  It must be done with a clean installation using a Vista FULL 64-bit disk/license.

  Buy a version of disk/license FULL Vista 64 bits of your local computer, or online store: amazon, newegg, etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you already have a version of Vista Home 64 bit, here's how to buy Vista 64 bit Ultimate Anytime Upgrade:

  http://www.Microsoft.com/Windows/Windows-Vista/get/Anytime-Upgrade-overview.aspx

  See you soon. Mick Murphy - Microsoft partner

• How to remove the printer driver under windows Vista software

  How to remove the printer driver under windows Vista

  Hello

  Add or remove a printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  --------------

  If you have an error spooler or service use these methods to make them disappear including having to re - install
  the same printer if you intend to remove it.

  Check chan seen message here - one of the highest.

  fixed spooler subsystem app stopped working
  http://social.technet.Microsoft.com/forums/en/itprovistaprinting/thread/460f297a-dd66-4476-A176-542e1519ca3e

  ===================================

  If the above didn't help:

  Use this method to clear the spooler and then uninstall and reinstall your printer (check with the manufacturer for)
  the latest driver).

  Check Mr. Fixits here and if you use the other methods go back and try again later.

  Problems of print and error - a Mr Fixit of printing
  http://support.Microsoft.com/GP/printing_problems

  Solve printer problems - a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/8c11977e-8244-408f-A036-7978a618d7a21033.mspx

  ------------------------------------------------------
  Logon as administrator

  Start - type in the search box-> COMMAND - control to the top of the list and RIGHT CLICK – RUN AS ADMIN

  You can copy and paste each line except those brackets and press ENTER after each.

  net stop Spooler

  (echo suppression of all print jobs)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  del/q %SystemRoot%\system32\spool\printers\*.*

  net start Spooler

  (sound Done!)<-- you="" should="" see="" this="">

  ping localhost n 4 > zero

  Another way
  http://4sysops.com/archives/how-to-cancel-a-print-job-that-hangs-under-Windows-Vista-and-XP/

  Check the print - DELETE/STOP queue all jobs - then right click on the printer - REMOVAL
  http://windowshelp.Microsoft.com/Windows/en-us/help/bb6f81d9-4092-4ac8-9716-2bd008f513e11033.mspx

  If you use Control Panel - Classic - printers

  Try after unplugging your printer if necessary.
  -------------------------------------------------------------

  Also check the spooler print and its dependencies and addictions Service.

  Print Spooler service
  http://www.blackviper.com/WinVista/services/Print_Spooler.htm

  How difficulty Windows Vista print spooler starts do not
  http://www.ehow.com/how_4920100_vista-print-spooler-not-starting.html

  ------------------------------------------------------------

  Check this thread if necessary - to stop and erase the spooler

  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/thread/a15779d6-ac0d-42FD-9Ac2-a1da241ea19f/

  and here
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/58b54fa9-cf6f-40F7-90b2-8093c6777493

  ------------------------------------------------------
  Clean the General corruption and repair or replace the damaged/missing files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  CheckDisk (chkdsk) runs at startup.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• How to disable the test mode on Windows 7?

  Hello

  I read an article on how to get rid of the test mode on windows 7 and the suggestion was to download fixit from windows.  My problem is that the slider runs constantly and I can't click on anything to start the download.  Any suggestions?

  Hi Mona,.

   
  Thank you for visiting Microsoft Community.
   
  I understand that you have found a water test mode on the Windows 7 computer brand.
   
  Test mode is a mode that aims to install drivers that are not tested.
   
  For several build of windows 7, that this mode and disable this, you can follow the article below:
   
  http://support.Microsoft.com/kb/2509241
   
  To fix the rotating cursor around constantly please follow the suggestions below:
   
  This problem may be caused for the following reasons:
   
  Third-party applications.
   
  Temp folder is full.
   
  1. What is the number of brand and model of the computer?
   
  2 have you recently made any changes to the computer?
   
  To resolve this problem follow the methods below:
   
  Method 1: Clean boot
   
  Put your system to the clean boot state helps determine if
  any third-party applications or startup items are causing the problem. You
  need to follow the steps in the article mentioned below to perform a cleanup
  Boith
   
  How to perform a clean boot in Windows
   
  http://support.Microsoft.com/kb/929135
   
  Note: After troubleshooting, see the section "how to reset the computer to start.
  "normally after a boot minimum troubleshooting.
   
  Use this procedure to disable all the third-party application and Microsoft services will be activated.
   
  Method 2: Disk clean
   
  http://Windows.Microsoft.com/en-us/Windows/delete-files-using-disk-cleanup#delete-files-using-disk-cleanup=Windows-7
   
  Following this article, you can delete the temporary files that is on the computer.
   

  Additional information:

  How to disable the "Test mode" message that is displayed in Windows

  http://support.Microsoft.com/kb/2509241

  Hope this information helps. For all other windows-related assistance,

  Do not hesitate to contact us and we will be happy to help you.

• How to uninstall the EverQuest game on windows xp?

  How to uninstall the EverQuest game on windows xp? all game files there are a lot of hidden files & I can't find any program uninstaller. I do not think that
  I should just delete the files I've met without uninstalling. I need to get rid of all EverQuest files on this computer. the game files were on the computer when I got it & the game takes as much memory. game files are everywhere but they are hidden. can someone help me please?

  Hello

  I suggest for the link and follow the steps in the article:

  How do I add or remove games in Windows XP

  http://support.Microsoft.com/kb/307768#top

   
  I hope this helps. If you have any other queries/issues related to Windows, write us and we will be happy to help you further.

• How to fix the user accounts in windows 8

  How to correct the user account in windows 8 on new g7 2246nr, I put to your laptop using the Microsoft account then switched to a local account.  I found myself with i admin working the rest of my files are broken up between 3 other user accounts.  I spoke with Microsoft to try to consolidate the accounts and they used a command line in the command, but he has not done. I always work with the system, but it has problems. I reloaded the software so for 3 times. All know how to correct the problem without reload all the software again?  also, after configuring sharepoint in Office Pro Plus, he created another administrator account.  I do not think this would happen?

  Hi BJ2124,

  Although I regret the inconvenience that you had with your experience of Microsoft Windows 8, you can better receive the technical expertise you need by contacting Microsoft about the issue of multiple account creation.

  You can call Microsoft Customer Service at 1-800-642-7676
  Mon - Fri: 05:00 - 21:00; Sat - Sun: 06:00-15:00 (PST)

  As a reference, I included the link to the technical support of Microsoft Windows 8 page:

  http://support.Microsoft.com/contactus/?ws=support

  Also, here is a reference link to change logins to Microsoft for local accounts:

  Microsoft how to switch from one account to a Local account in Windows 8

  And finally, here is a quick reference to solve the problem that you encounter while using an account download troubleshooting tool from Microsoft:

  The problems of account Microsoft Windows 8 with convenience store "Microsoft accounts"

  In this forum support is available for support hardware/software HP. I will provide better supported with your hardware/software of HP. If you need help with a software which is another provider, so I can re - direct you to reference appropriate at this time.

  I hope that you can mark these messages as solved, so that you can inspire others to follow your example with success. You never know who you can inspire.

  -How can I give Kudos? | How to mark a post as solved? --------------------------------------------------------

• How to perform a new installation of window 8.1?

  Hello

  (If this is important), I use an Alienware X 51 R2 with the following specifications:

  Intel i5 4440U 3.3 GHz processor

  AMD R9 270 2 GB

  8 GB RAM

  1 TB HARD DRIVE

  Basically, my alienware has had many recent accidents before I made my own window installation 8.1 via the USB port. I thought it will run more fast and smoother after I have done, but here are a few problems:

  1 secure Boot product still "no error of Boot Drives Found" as soon as I turn on the computer. So I have to disable Secure Boot.

  2 application opening time is still as slow as before the clean install (i.e. Chrome)

  So, is there a procedure step by step on how to perform a new installation of window 8.1? I want this PC to match at the beginning when I first bought.

  Any help would be greatly appreciated.

  Thank you

  Tin

  You must prepare installation media is to present FAT32 the GPT partition scheme and parameters of the UEFI BIOS with secureboot. See here for more details:

  http://dellwindowsreinstallationguide.com/download-Microsoft-Windows-and-Office/Download-Microsoft-Windows/download-Windows-8-1-retail-and-OEM-ISO/

  You can perform additional steps to clean your drive before installing Windows:

  http://dellwindowsreinstallationguide.com/cleaning-up-a-drive-format-vs-secure-wipe-SSD-and-HDD/

  For complete instructions, see here:

  http://dellwindowsreinstallationguide.com/a-clean-install-of-Windows/a-clean-install-of-Windows-8-1/

  Note You may want to complete execution F12 diagnostic tests to verify the correct materials:

  http://dellwindowsreinstallationguide.com/F12-Preboot-Diagnostics/

  If you want to speed up your system to get rid of the mechanical HARD drive and replace it with an SSD for example the 250-500 GB MX200 Crucial:

  http://UK.crucial.com/GBR/en/compatible-upgrade-for/Alienware/x51-R2

• How to change the start menu of Windows 8 in the version of Windows 7?

  How to change the start menu of Windows 8 in the version of Windows 7?

  How to change the start menu of Windows 8 in the version of Windows 7?

  Hello

  If you find that you just cannot function without a Start button, there are third-party solutions.

  Debut8 for Windows 8:

  http://www.stardock.com/products/Start8/

  Concerning

• How to check the print queue in Windows 8

  Difficulty controlling the queue with your new Windows 8? Here's a great video on how to do it:

  Hope this helps to understand how to check the print queue in Windows 8. If you have problems, let me know, I'll see what I can do to help.

• How to start the assessment without a device

  Hello

  I downloaded the evaluation version.

  How to start the assessment without a device?

  Thank you

  DV63

  Hi DV63,

  Welcome to the Forums EITHER!

  If you downloaded an evaluation version of LabVIEW your 30 day trial must begin immediately after being invited to enter a serial number. You can choose not to enter a serial number and this will begin your trial period. I recommend that you install OR-DAQmx device drivers; It is a software that allows you to communicate with the hardware from National Instruments DAQ. However, this facility will be particularly useful because it allows you to simulate an Instrument with the measurement and Automation Explorer (MAX); This means that you can immediately start the signals in LabVIEW.

• How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  How to configure the LDAP connector in windows server 2012 R2 Active Directory?

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• How to change the folder opens when windows Explorer opens

  In XP Service Pack 3, when Win Explorer is open, files that open has changed on its own (or I don't know what I did to cause this change). Records of Documents are all posted, but the C: drive is closed, where it will display all folders to open at this stage.

  How can I reset so that all the files under C: drive open when I open Win Explorer?

  Kind regards

  bytes2001

  Hello bytes2001,

  I enclose a link below that I hope can fix this problem.  Please let us know status.

  How to customize the Windows Explorer views in Windows XP: the bottom of the page talks about how to change the default folder of Windows Explorer.

  http://support.Microsoft.com/kb/307856

  Thank you

• How to change the font size in windows diff that is email; Word; etc.

  How to change the font size in windows diff i.e. E-mail; Word; etc.

  Try the following: (Note: you must be an administrator to do so)

  1. go into the control panel.

  2. double-click on 'ease of access '.

  3. click on "make the computer easier to see.

  4. click on "change the size of text and icons.

  5. click on "Continue" to the pop-up message.

  6. Select "larger scale (120 DPI)(-rendre le texte plus lisible) and click on 'OK'."

  You need to restart for the change to take effect.