How to put a Portege M700 to full 4 GB of RAM?

Similar Questions

• How to disable the Portege M700 touch screen?

  I have a Portege M700 tablet.
  I would like to disable the installation of the touch screen on it (but not writing or drawing ability activated by the stylus).

  Is this possible?

  My friend has a M700 and it has disabled the touch screen feature, so it is possible.

  I don't know exactly how do it, check the user manual, or go to the control panel and watch in the utility of the tablet.

• Need step by step instruction how to recover the Portege M700

  Hello

  I have a Portege M700, aged around 4 years I want to start a new one with.
  I've restored with power on and the 0 key to get to the factory, but now I guess I have to update all the drivers and get all updates Windows Update?

  I do?
  If so, how do I?

  If someone could help me and give me instructions step by step on the place where from there it would be most appreciated.

  Other advice on what I need to to get it working at optimum would be really useful too.

  Thank you very much.

  You have two options to reset the computer laptop back to factory settings:

  (1) you must use the recovery disk that you can create using the Toshiba recovery media creator software. This software is always pre-installed on a Toshiba laptop.

  (2) the second option is HARD drive recovery. How to use it? See this FAQ:
  [How to recover a Toshiba notebook with the HDD recovery procedure | http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm]

  Some feedback would be appreciated.

• How to put a picture of album full size like wallpaper without cropping?

  I accidentally hit the "crop image always" instead of the box "crop image only once" when selecting an image in 'Settings - customization - Wallpaper - Home Screen - Album'. Now I don't get the option 'image of harvest only once' more. I discovered that the app settings can be changed under 'Settings/applications/launch default' and choosing "clear Defaults". But I have trouble finding the ringt app. The list is looooong... Anyone?

  Try the settings then Apps then press the 3 points then Preferences app Reset however please not what other parameters are also reset so you will need to check the other settings of applications and adjust them accordingly

• Portege M700: How to activate the touchpad Vista (by software)?

  Hello

  I use a Portege M700 Vista.

  Some time ago, due to a problem of cursor (he jumped at random on a different position in the text I type), I turned off (by software) the (use of the) touchpad. From there on, I use the M700 keyboard and an external mouse.

  Unfortunately, I have forgotten how I did it and am now unable to turn the touchpad... Even after spending a lot of time looking for the command (under Vista), I have not discovered its location...

  Any help woud be appreciated.

  Thanking you.

  Hello

  The touchpad can b switched ON and OFF using the FN + F9 key combination.

  This work of service on most Toshiba laptops!

  PS; This is also mentioned in the manual of user ;) take a look at the user manual if you need more information on your laptop.

  Welcome them

• How to connect Portege M700 to TV using the VGA port?

  I bought a VGA S-video/audio adapter and connected my VGA port and the TV.
  Nothing happened.

  In the control panel... no other display/external display was detected.
  Validations only that I ran using an emulator port or something.
  I have the Portege M700 preinstalled with Vista Business lozenges.

  Any ideas would be welcome.
  Thank you

  Hello!

  I have a Portege M700 too and there is no S-video port.

  If you want to switch between the following views the use of FN + F5 as Feliks said. I use the Portege M700 with an external monitor via a VGA cable and it works perfectly.

  Good bye

• How to activate the touch screen of the toshiba portege M700

  I just upgraded my toshiba portege M700 vista home premium to vista ultimate. Finger touch screen is now turned off and I can't turn it back on.

  I went to the pen devices and entry in Control Panel and the relevant tab isn't there.

  Hi Iain K,

  I suggest to install the latest drivers from the computer and check if the problem persists.
   
  For support contact Toshiba using the following link below:
   
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/modelContent.jsp?CT=DL&OS=&category=&MOID=1927814&RPN=PPM70U&modelFilter=M700&selCategory=3&selFamily=1073768662

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.

• Where to find Win XP tablet Edition 2005 for Portege M700-106

  Hello.

  Can I find somewhere on the Web of Toshiba Windows XP tablet Edition 2005 with drivers full sites
  (for example: Recovery DVD with XP) download to laptop Toshiba Portege M700/106?

  Where can I download the AHCI drivers for laptop Toshiba Portege M700-106?

  I want to install Windows XP on my book, but I don't know how!

  Thank you

  Hello

  > Can I find somewhere on the Web sites of Toshiba Windows XP tablet Edition 2005 with complete drivers
  (for example: Recovery DVD with XP) download to laptop Toshiba Portege M700/106?

  You can find only a Windows XP tablet edition drivers on the European driver Toshiba page! But you won't find a Windows XP tablet Edition 2005 OS for download!
  You can buy a clean OS and then you could install the Toshiba drivers downloaded to the laptop.

  PS: I put t know what OS came preinstalled on your M700 but especially a Toshiba Recovery, CD/DVD should be bundled with the laptop.

• Re: No display on Portege M700

  Hello

  My son put his computer bag stuffed with his laptop Toshiba Portege M700 inside his office (just out of warranty).

  The laptop shows no sign of injury, but on turn it only "all the right noises", but there is no display on the screen. If the laptop is turned on with the charger connected and then some colored vertical bars appear, and then they fill with white, but nothing else.

  We tried to connect an external monitor and pressing Fn + F5 and the vertical bars disappear from the internal screen and it goes totally black, but nothing appears on the external monitor. Pressing Fn + F5 new returns the vertical lines at random on the internal display.

  We have also tried to start the laptop in the Mode menu without failure by pressing F8 during the initialization of the laptop, with or without an external monitor, with or without the Fn + F5, but you cannot get any video on the monitor either internal or external.

  Fact it seems that maybe a connector was dislodged by the shock of the fall, that you think that the laptop is now pushing up daisies?

  Any notice received with gratitude.

  WIBs

  To be honest I n don't know which connector you want to say but there is no pic on external displays to be a serious problem.
  It seems impossible to send the video signal via the video out port.

  It is not easy to offer an accurate diagnosis on this virtual path.
  What do you do now? Try to repair it or what?

  Maybe you should contact Toshiba service and ask for verification. They can run diagnostic tools and tell you what is defective, what needs to be replaced and how much it will be cool. Then you can do what to make the decision.

• Portege M700 falls down after upgrading to Windows 7 32 bit

  Dear all,

  My portege M700 laptop played most of the reliable time.
  However, it was taken very slow sleep after a few iterations of sleep-wake, taking > 5 min.

  I have now installed Windows 7 32-bit, which works very well. Has no problem with the release of sleep. However, on 1-2 times per day now, I get a message that Explorer crashed and must restart. About once a week, the system crashes completely with a blue screen of windows (without core). Most of the time, in seconds to the time that the screen freezes, I hear the fan switch on at full speed (much faster that it never runs normally) and the case becomes hot enough.

  I installed the latest drivers for 32 bit Windows 7 on the site of Toshiba UK.

  Can someone help me to diagnose the cause of these accidents?

  Thank you very much

  Chris.

  Hello

  It is difficult to say what might cause this behavior strange system.
  But you said something about the hot deal and fans begins to spin faster

  It seems that the internal temperature of laptops increases to a higher level.
  A higher temperature may affect the RAM modules and this could be the reason why the system hangs and does not answer.

  What to say that you should check the Win 7 power management settings.
  There are many options that could decrease the performance of the processor and increase the cooling.
  In addition, you should check if the cooling fans are free of dust obstructed fans might not run properly and this would increase the temperature as well.

  Hope this helps you

• Installation of the F3507g WWAN for Portege M700 PPM70E module

  Hello

  I bought a M700 who returned from a leasing company.
  It has a webcam or the module installed WWAN.
  I am not missing the webcam but try to upgrade the WAN card.

  PPM70E-0QH02DEN model number

  I got a card sim in Bay battery holder, while the mini-pci card should miss.

  Is it possible to upgrade?
  How can I access the mini-pci slot?
  What parts do need me? (F3507g card, antenna, cables, live)

  Thanks for help.

  Pete

  Hello

  You mean the 3G module?

  My knowledge of the 3G module was not installed in all Portege M700
  This means that there are different motherboards, which provide different hardware specifications.

  In your case, I recommend you contact a local ASP.
  Guys would be able to help you and provide the right parts for an upgrade (if possible)

  As far as I know that some of the M700 were equipped with a 3g + / HSDPA broadband with a data flow rates up to 3.6 Mbps (Module can be expandable to 7.2Mbps by firmware)

  Welcome them

• Re: Inaccurate cursor when using the stylus on Portege M700 Tablet mode

  Hello

  I was struggling with my stylus for a few months. When I use it, the cursor is just the tip, when I'm in the corners (where the calibration takes place). More central that I get on the screen, more it is. We're talking about half a centimeter, which does not seem a lot, but that can be a real pain if you try to write or draw on the screen.
  The tragic part is that it started AFTER I used the tool of calibration for the first time. If I had known that it makes things worse, I would not have touched him.
  My question is: is there anyone out there with the same problem, or is it unique? If this is the case, I'll have a conversation with my dealer after I go home.

  If it is not unique, how this was dealt with?

  My laptop is a Portege M700, with Windows Vista Business SP1. This issue has been consistent through all kinds of situations, hardware configurations and software content, and the starting point was obviously the calibration.
  I thank in advance anyone who can shed some light on this for me.

  Best,
  Oliver

  You're calibrating with the stylus on an angle?

  Try it with the completely vertical stylus.

• Portege M700 searching for Mobilink ConManager be used with Windows 7

  Hello

  I upgraded a Portege M700 Notebook Vista (of recovery) for Windows 7 (32 bit). Most of the devices and drivers where found and assigned automatically in the installation process, some more later with the Toshiba/Microsoft software updates. Also the driver for the Modem 3 G integrated has been installed and says "working properly".

  Feature: "SM Bus Toshiba broadband (3G HSDPA) minicards Modem.
  Pilot: "Novatel Wireless Inc." / version 3.0.0.3 / Date 14.09.2006 (signed by Microsoft)

  But I can't find software for Windows 7 to make use of the modem (establishing a connection)
  Formerly "Mobilink connection manager' does not show upward in the Toshiba download page (Windows 7) and the old version (VISTA) does not (stops without error message installation procedure).

  Y at - it no hint how to establish a connection 3G with the M700 (Win7) or a link to a working version of the Mobilink for Win7 connection manager?

  Thanks in advance...
  Peter

  Post edited by: Riedel

  Hello peter

  You have upgraded to Vista preinstalled or you have installed your own own Win7?

• Portege M700 rotation problems after the upgrade to Windows 7 64-bit

  I've upgraded to windows 7 yesterday evening on my portege m700. It is Windows 7 Pro 64 bit. I installed all the drivers in 64-bit on Toshiba page and the Windows section. Everything works perfectly except the screen does not properly rotate when in tablet mode. I can press ctrl + alt + arrow keys to rotate, and I can also use the windows Mobility Center to rotate 90 degrees at a time. I wonder what I have to do turn once engaged in tablet mode, as it did in Vista. I have the Toshiba rotation utility installed, but it doesn't seem to be something. It seems that it does not receive a signal from the screen that it was shot.

  I need it for school, so any help is GREATLY appreciated.

  Hello

  I think that there are not all 64boit drivers for Win 7 published and released for M700 and you will need to also install drivers for Vista 64-bit!

  For example:
  * Tablet PC Extension v 1.0.0.1 for Vista 64 bit Package *.
  This package installs a range of important public services.

  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.

  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.

  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

• Portege M700, Windows 7 and touch screen

  The Portege M700 was feature touch screen before I upgraded Vista to Windows 7. Now it does not, any more than the features of two fingers that W7 is supposed to offer. Any ideas on how to recover the touch screen feature?

  Hello

  I think that you need to install the driver for the Wacom tablet.
  The driver is placed on the page of the European driver Toshiba
  The WACOM Dual Touch driver for the integrated tablet is required to use the features of the tablet.

  There is also the Extension of Tablet PC Package.
  This package installs a range of important public services.
  Utility _TOSHIBA of rotation: _ define the orientation of the screen by default as the system to be used in the transition from the PC to Tablet mode, or vice versa.
  _TOSHIBA tablet PC buttons driver: _ you can dedicate tablet buttons to perform common tasks so that you can easily use your tablet PC away from your workstation. For example, you can dedicate a button to open a program or to change the orientation of your screen.
  _TOSHIBA accelerometer utilities: _ these utilities are a set of material utilities that work with the integrated motion sensors you machine. With the accelerometer, your machine will be able to detect how you're holding it at one point. You can set the machine to perform a specific function when the device is tilted quickly left or right, either at the front or back. You can also take control of the cursor in some applications and move by leaning the PC in a certain direction.

  But all of these tools are released for Vista when perhaps they will work with Win 7 too check it!