How to put each item in a list on a line separate from the text (Applescript)

Similar Questions

• I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all s

  I'm transferring my entire website from my old Web host at GoDaddy. How to copy all my files (in Dreamweaver) to my Web site from the server, it's on now, on my desk? So I can then connect you to my new server with GoDaddy and transfer all of the site?

  If you don't have local copies of your site on your computer...

  1 create a new Site definition using your old FTP GS-01 information: definition of a new site. Learn Dreamweaver CS5 & CS5.5 | Adobe TV

  2. Once you have the defined site and can connect, click on the Get (down arrow) command in the files Panel

  3 when you are prompted to hit "get the entire Site? Yes

  4. After downloading the entire site, navigate to the Site > Manage Sites > click the site > Edit > servers > click on the remote server > Edit to enter your new GoDaddy FTP Info

  5. after the test connection to check, you can connect, click the command Put (up arrow) in the files Panel

  If you have a site already defined for your old Web host, go to #4 above.

• How do I create a Wizard of action as both copies and highlights the text?

  Hello

  This may show that I am not a very experienced user, but that's it. How do I create a Wizard of action as both copies and highlights the text? I want to make a tool that does both, but when I try in Action Wizard I don't see these editing options.

  Help appreciated.

  See you soon,.

  Michael

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Prof. Michael A. Gilbert

  Coordinator computer SCIENCE

  Department of philosophy

  424 Ross S

  [email protected]

  f; Coco

  Is not possible.

• How to enable recent items on jump list

  Not sure if it of a problem or not. I would like a list of recent items on my list of jump (in fact, only for MS Word) in the task bar. I only have pinned files, but would like to be able to place a file in the list of recent files and PIN which as well. My problem is that I do not see the recent files on any list to jump from a program in the task bar. I went into the properties of taskbar (start menu/customize) and tried to click on the number of recent files, but it is zero and is grayed out so I can't change it. What should I do? Or is it a problem that requires a repair?

  I've seen a few discussions about this in this forum - I don't know if this is a problem, or if there is somewhere a seting I forgot to check.

  Right-click on the Start button, and then select Properties. Click on Start menu tab and check the box in front of the store and display recently items in the start menu and the taskbar.

  http://Windows.Microsoft.com/en-GB/Windows7/whats-new-with-the-Windows-7-taskbar

  http://www.SevenForums.com/tutorials/14067-Jumplist-Launcher-create-custom-jump-lists.html

• List several boxes of selections in the text area

  Hey all, I got a very helpful response last time, but now I want to put several list boxes selections in a box.  * Line * Help!

  Here is a script to custom calculation, you can use for the text field. I guess it's multiline and you want each element of list on a separate line box:

  Custom calculation script

  (function () {}

  Get field values

  var v1 = getField("lb1").value;

  var v2 = getField("lb2").value;

  var v3 = getField("lb3").value;

  Initialize the array

  var a1 = [];

  Add the list box values in table

  A1 = a1.concat (v1);

  A1 = a1.concat (v2);

  A1 = a1.concat (v3);

  Convert the table to a string, separating the values with a carriage return

  and set the value of this field

  Event.Value = a1.join ("\r");

  })();

  I coded this for more clarity, so you can be able to do so more effectively. Any decent JavaScript reference will have more information on the methods of array concat and join.

• fill a list based on a value from the drop-down list box

  Well, I know a way around it but its quite long with what I know. I worked on a better solution for a day now. So maybe (or likely) someone knows better. I'm trying to fill a drop drop down based on a user selection figure in a list of check boxes. I know I could create several drop-down lists and hide away them until the user changes the value of binding. But the dropdowns would consume a lot of space in my form design in liveCycle. So is there another way or I'm stuck he made a long journey. I also need to assign values to these elements, since they change because the values are used as item numbers later that fill a text/number field later in form as a list of materials.

  Tell me if I'm wrong, please (I'm new to all this)

  in the box in the click event

  If (this.) RawValue == 1)

  {

  dropDownList1.addItem ("item # 1", "value1111");

  dropDownList1.addItem ("item # 2", "value2222");

  }

  on the other

  {

  dropDownList1.rawValue = "null";

  }

  I'm sure that null is not good and I don't know that I have to set the drop-down menu to clear items on preOpen. Or maybe not. And there is a way to add items without the addition of a new right of the line? I'm on the right track?

  Hello

  Rather than having the script in each of the boxes, you can have the script in the event preOpen the drop-down list that leans on the boxes.

  I downloaded an example here: https://acrobat.com/#d=VwREjsMgvqXpVqPu54kSNw

  Take a look at the preOpen the dropdown event.

  // clear the dropdown displayed value and items
  this.rawValue = null;
  this.clearItems(); 
  
  // repopulate the items based on the checkboxes
  if(fruit.rawValue == 1)
  {
       this.addItem("Apples", "fruit_001");
       this.addItem("Pears", "fruit_002");
       this.addItem("Oranges", "fruit_003");
       this.addItem("Bananas", "fruit_004");
       this.addItem("Grapes", "fruit_005");
  }
  
  if(cars.rawValue == 1)
  {
       this.addItem("Volvo", "car_001");
       this.addItem("Ford", "car_002");
       this.addItem("Opel", "car_003");
       this.addItem("Toyota", "car_004");
       this.addItem("Nissan", "car_005");
  }
  
  if(counties.rawValue == 1)
  {
       this.addItem("Co. Tipperary", "county_001");
       this.addItem("Co. Cork", "county_002");
       this.addItem("Co. Dublin", "county_003");
       this.addItem("Co. Clare", "county_004");
       this.addItem("Co. Kerry", "county_005");
  }
  

  Hope that helps,

  Niall

• I need to find all of the XML elements and add a line break for the text of each of them

  I need to find all XML elements and to add a line break the text of each of them.

  Is it possible with a script?

  Try this piece of code as it is. I hope that's what you want...

  var myDoc = app.activeDocument;
  var inddRooElement = myDoc.xmlElements.item(0);
  var xPathElements = inddRooElement.evaluateXPathExpression("//*");
  var elementCount = xPathElements.length;
  for(var eId=0; eId
  ----------------
  Green4ever
  		   

• creating a list of copy and pasted from Notepad text...

  Hi, I am trying to create a list (with the delimiter set for space)... but it seems that when the text that I work with (cut and pasted from Notepad)... it seems that ColdFusion is not recognize as legitimate spaces spaces... probably control characters or line of brakes etc...
  
  How could set the delimiters to look for these things?
  
  For example, I try to import a cut and pasted list of notebook that looks like this...
  
  [email protected]
  [email protected]
  [email protected]
  [email protected]
  [email protected]
  
  But yet when I do a listlen I get a result of 1 with defined separator on «»

  One thing you could do is a REREPLACE who zapped yields before the implementation of your list. For example, for the variable "email"...

  #REReplace ('#EMails #',' #chr (13) #',', ',' ALL') #.

  replace line breaks - Chr (13) - by commas. You then have to zap the trailing comma. The whole thing would look like the code below. Not the most elegant way to do it, but it should work. :-)

• I have Windows Vista with Microsoft Works. I would like to make the computer to be bilingual in English and Hebrew. How can I do? Just reply to * address email is removed from the privacy * thank you

  I have Windows Vista and you are using Microsoft Works. I would like to make my computer b bilingual English and Hebrew. How do I dot it? Just reply to * address email is removed from the privacy * thank you

  Hello

  I suggest you follow the steps in the link below and check off the question:

  How can I get additional language files? :

  http://Windows.Microsoft.com/en-us/Windows-Vista/how-do-I-get-additional-language-files

  I hope that the information above helps you.

• How to free up space in a drive by deleting files hidden from the previous operating system?

  Original title: my vista home c drive now have very low free space.there is some files hidden from the previous operatnig system busy space that are useless.how can I delete these files?

  my laptop is slow due to the very low free space in c drive. How can I remove the unnecessary files from c drive or increase the volume of drive c?

  Download a program like TreeSize Free (http://www.jam-software.com/treesize_free/) to see where the files take up a lot of space.  Be aware that deleting files without knowing what you're doing can cause your system to be unable to restart or cause instability can so be sure you know that you are deleting before you start.  There is no way to extend one hard disk other than to replace it, in which case you need to copy all the files from your old drive to the new.

• Is it possible to create interactive drop-down lists that reference the tables on pages separate from the PDF?

  I'm looking to create a user to input PDF in the drop-down lists are used to search for tables, however, I'm not very familiar with the options that are available or if this is even possible?  Also, is it possible to write a substantive code that could read the text of the user entered to perform a search or even solve an equation? Can someone let me know if these elements are possible and/or let me know what adobe program may be required to accomplish these tasks? Thank you!

  PDF documents have no concept of "tables" as MS Word or MS Excel has. There is content that looks like a table.

  Acrobat JavaScript knows tables and form fields. So we could have a table in JavaScript and complete a series of fields that looks like a table. You can use JavaScript to find the table.

  JavaScript in Acrobat can accept user entries in the fields and pop-up windows.

  It is possible to solve theoretical equations the user if the good rating or coding is used.

  D.P. Story is an evangelist generated LaTex PDF to create PDFS with mathematical symbols, and he also created the AcroTex product that allows to create educational tools that includes mathematics calculation self placement tests.

• How to open other applications Viewer? -App "URL scheme" has disappeared from the spectator Builder!

  Hello

  The option "Diagram of URL" in designer Viewer have left me to specify a url that makes other apps to open my Viewer. But this option has disappeared from the new version of the viewer generator. So. How now to allow other apps to open my Viewer?

  Working as new feature v20!

  Thank you thank you thank you, Bob - and all others to the DPS at Adobe team.

  Axel

• How can access each item on a HorizontalList component

  Hello

  I would like to know how I can access each element on a HorizontalList component. What I want to do, it is something like this:

  My HorizontalList:

  < mx:HorizontalList
  low = '0 '.
  backgroundAlpha = "0.0".
  ID = "catalogoOpciones".
  columnCount = '3 '.
  Height = "80".
  hideEffect = "{esconderse}.
  horizontalScrollPolicy = 'on '.
  Selectable = "false".
  showEffect = "{mostrarse}.
  Width = "100%" >
  < mx:itemRenderer >
  < mx:Component >
  < mx:VBox height = "100%" verticalGap = "0" horizontalAlign = "center" >
  < mx:Label id = text = "{data.nombre 'title'}" textAlign = "center" styleName = "nombreOpcionDetallePlato" / > "
  < mx:ComboBox id = dataProvider = "{data.opciones 'seleccion'}" labelField = 'label' labelFunction = "funcionLabelComboBox" styleName = "comboOpcionDetallePlato" change = "dispatchEvent (new Event ('cambioOpcion', true))" / > "
  < mx:Script >
  <! [CDATA]
  public void funcionLabelComboBox(item:Object):String {}
  Return item.label + ", $" + item.precio;
  }
  []] >
  < / mx:Script >
  < / mx:VBox >
  < / mx:Component >
  < / mx:itemRenderer >
  < / mx:HorizontalList >

  What I want to do is to show on a screen to alert the index selected in each ComboBox on the horizontallist control:

  for (var i: Number = 0; i <. horizontalListt.dataProvider length; i ++) {}
  var index: Number = (horizontalListt.dataProvider.getChildAt (i) as ComboBox) SelectedIndex;
  Alert.Show (index. ToString());

  }

  I should add that the horizontalList works fine, the only thing that gives me problems is access to every item in the list.

  I thank very you much for your time and your help.

  Sebastián Toro O.

  You usually (very close to always) to change the data of dataProvider when list items base change of components. For the ComboBox change manager should do. List based components recycle their converters point, you have to run to the data.

• How to open each file version of CS in its own version of the program when double-clicked?

  Hi all

  It is on the coexistence of Indesign CS4 and CS5.

  In my business: I work with Indesign CS4, but a colleague test CS5 in real works to day to day, and every day I met CS5 files I have to correct, so I also installed CS5. Now, when I start it in the morning, and no program InDesign is open again, whenever I double-click an Indesign file, the system will open with CS5, no matter whether the file is CS4 or CS5. I find it quite annoying, of course. I want that each version of file to open immediately in its own version of the program. I think that what is happening to a lot of people, but I find the question in the forums and haven't found anything.

  Of course I use roundabouts as have my colleague write '_CS5' at the end of each file, put CS4 in my startup items (so that once the program is open, the question works on the other hand, and any file Indesign just opens in CS4 when double-clicked...).

  In addition, all Indesign files appear on the desktop in the form of files CS5

  I'd appreciate a lot of ideas on the subject, thanks!

  soxy Rorohiko.com...

• How can I add whatsapp for my I look if I can see the text messages and respond

  How can I add whatsapp for my I look if I can view and respond to messages?

  Hello

  WhatsApp WhatsApp Messenger Messenger doesn't offer not currently support Apple Watch, is not currently possible to reply to messages on Apple Watch WhatsApp.

  However, your watch can still be configured to reflect the application from your iPhone notification alerts:

  -On your iPhone, in the application of Eve, go to: My Watch (tab) > Notifications > list of applications > turn on the button next to WhatsApp Messenger.

  When the developer adds support for Apple Watch, description of the application in the iTunes Store / App Store will be changed to include the wording: «Offer Apple Watch App for iPhone»

  You can contact the developer to suggest they add this feature:

  https://www.WhatsApp.com/contact/

  More information:

  https://iTunes.Apple.com/GB/app/WhatsApp-Messenger/id310633997?Mt=8